NEITHER 5751 Clk 10 MHz Sync

Similar Questions

• FPGA IO Module error, recognizes NEITHER 5751 in LabVIEW

  Here is my configuration:

  • Windows 7 sp1, 64-bit
  • LabVIEW 2013 sp1, FPGA, real-time

  Which is connected via an Ethernet cable to:

  • Chassis SMU-1078
  • SMU-8135 embedded controller
  • SMU-7961R FPGA x 2
  • Module e/s NI 5751 x 2
  • LabVIEW time real 13.0.1
  • NOR-DAQmx 15.1.1
  • NOR-RIO 15.5
  • OR PXI Platform Services 14.1.0

  NOR, Max the FPGA and 5751 adaptation Modules appear as a gift. But in my LabVIEW project, IO Modules always show an error. I chose the good 'NI 5751' option, but the State still shows this:

  

  I tried to restart the chassis and the computer. I tried selecting another Module of e/s and then back by flipping. I am also unable to compile the code example on the FPGA (Xilinx errors).

  Any ideas?

  The status shows you which adapter module expects the bitfile who is currently on the fpga module. The reason why it says no is probably because you have not deployed anything the fpga target since he powered and there just the default image loaded on it. Try deploying a bitfile to which has been compiled to work with a 5751 and you'll be fine.

  I do not know why you can not compile the 5751 get started example however. I'd make sure you have all the build tools installed correctly. What are the mistakes do you receive when you try to compile? Such problems are sometimes easier to solve by phone if you want to open a support on ni.com/support ticket.

• Time-loop at 1 MHz

  Hello everyone,

  After if you are looking for something already post on the subject, I found a lot of interesting information but no directly who can answer my question.

  I have LabView with time real extension.

  So far, I managed to do a time loop at 1 kHz, but the timer, MHz 1 option is gray, so I can't choose, even with the module in real time.

  Issues related to the:

  -J' heard that MS windows is limited to approtimatly 55 ms of precision. Is this true? I don't understand really because in this case, why NEITHER made a 1 MHz if it is not possible for MS windows to do?

  D ' other hand, how can I do the timer of 1 MHz for my time loop? Is there any process to do with the real time module to do?

  Thanks in advance for your help.

  Vivien

  What you did shows no need to have a while loop clocked at 1 MHz.  Value your ongoing samples DAQ assistant and collect many or all that is available.  Analyze and and for the file.

  A few tips.

  Signals of fusion is extensible by dragging the border down, so you can merge all the signals in a single step instead of having several signals fusion.

  You have the risk of rapid growth of the paintings that fill your memory using the concatenation of tunnels.

  You'd be better off using an architecture of producer/consumer to obtain data in a loop, then go to another loop for analysis and writing in a file.

• I have 3 computers, I have a sync account, but it can neither get their synchronization. Can someone tell me not no how?

  My main system and backup crashed. I had to start from scratch. I'm running, but can not synchronize three computers. I have a sync account, all units are currently running on different versions of Firefox. I do not have registration # or code

  You need three things to connect a 'new device' to your sync account.

  1. Username = the e-mail address used when you first set up Sync
  2. Password for this account.
  3. Synchronize key / key to recovery

  https://support.Mozilla.com/en-us/KB/find-code-to-add-device-to-Firefox-sync

• How to use the time of 80 MHz with the example of the soul base angular Position-buffer-Cont-Ext Clk.vi

  Hello:

  I use the card PCI-6602 and am a bit new to the use of timer/counters.  I use the Commission to measure the position of a quadrature encoder.

  I would use the time base internal 80 Mhz the map of 6602, but examples of LabVIEW will not allow that.  In the example, he States:

  2. call the DAQmx Schedule VI (sample clock) to configure settings of clock synchronization external sample Mode Sample and sample clock Source.  The sample clock Source will determine when a sample will be inserted into the buffer.  The 100 kHz, 20 MHz and 80 MHz time bases can serve as the sample clock Source.  The Edge parameter can be used to determine when a sample is taken.

  Is it possible to use the database internal time for my application?

  I have attached the example vi that I use.

  Thank you.

  Pat

  Hi, Pat.

  

  The rate determines how fast the samples are acquired and put on the material buffer.  This value depends on the basis of time, which is specified by the source of the VI DAQmx calendar entry.  The default source on the PCI-6602 map is the on-board clock (80 MHz).  The rate must be a divisor of the source.  For example, 80 MHz, 40 MHz, 20 MHz, 10 MHz,..., would be acceptable values for the entry rate.

  So the answer to your question would be to remove the entry from the source and ensure that the rate is a factor of the source.  Leaving this entry unwired will use the clock shipped by default of the unit, as shown in the screenshot below:

  

  I hope this helps.

  

• Computer recognizes the detonators but neither WMP, Winamp or Media Monkey Duke he or syncs

  I am at a loss here. I recently reinstalled Windows XP Home and I had previously had no problem with the help of WMP or Winamp or Meida monkey with my rocket, but for some reason any any of my media programs will even recognize the "rocket" is connected, even if it shows as connected in Windows Explorer, and I can drag and drop files to and from it without problem. When I plug the "rocket", I wonder if I want to display files, sync with WMP, sync with Media Monkey, etc. Even if I chose one of the options to sync, I am told by programs that they cannot find a device.

  I've updated the driver on the computer, update to the latest firmware on the "rocket", I don't know what else to do. Any suggestions would be greatly appreciated!

  Other devices work on the same USB port?  A flash drive for example?

  Uninstall the USB ports, restarted (they will reinstall) and try to connect the "rocket" - MSC mode, try first (for the hell of do it a reset on the "rocket" first if you wish).  Tell us what is happening.

  Is it a 'normal' XP installs home or one that has been tinkered with? Sometimes, when they remove XP items it can affect something else.

• GPS sync and external clock

  Hello everyone,

  my task is to synchronize my PXI system to the time base GPS and after using an atomic clock (10 MHz output signal) as well as external CLK in. after the first synchronization of the GPS. the GPS signal is no longer available, however very important as the base unit of time not significantly drift. For the material there is a PXI chassis with 6682H module for GPS reception and 5622/5603-5653 combination for the acquisition of measurement data available.

  I thought since I'm fairly new to Labview and PXI system, it would be nice if someone could give me some feedback on the solution and help solve the problems that I have.

  The idea would be to have atomic clock connected to all CLK INs the PXI at all times. For GPS sync I would use the "Set time reference niSync' function first set the clock of Council to the GPS. After the free trial (the device is not moved during the GPS synchronization) I would like to stop using the GPS.

  After the external atomic clock. should also be used to calculate the frequency increases and the determination of the relative time. I suppose that if I back the reference to free running time, it would still use the last increments of calculated frequency derived from GPS?

  Is there another solution to address both reference to PPS? Problem is, I only have a 10 MHz signal available.

  Thanks a lot for any help

  Hello.

  When the PXI-6682 tries to synchronize to a source (GPS, 1588, PPS), she is a great fit for its time base, to eliminate the first offset from the source and then made small developed to the clock, the timekeeper, to keep in sync with the source of the conduct.

  In this case, you have an atomic source at 10 MHz that you trust, so you do not want/need small adjustments, you want to only make the initial adjustment of wholesale and then just run based on the clock of 10 MHz supplied.

  Is there a way to make the PXI-6682 to do this.  You will need to configure it to assume that PXI_CLK10 is good and no adjustment is necessary. There is no call to the Sync API OR standard to do this, you need to get the VI that configures the jury to do this in the .llb used to clock discipline (in which the PXI-6682 also doesn't make small adjustments based on his time, but guess PXI_Clk10 is 'good').

  You can get the .llb from here: http://joule.ni.com/nidu/cds/view/p/id/2318/lang/en

  The VI you need is mdevClkDisc.llb\_clkDisc_niSync_advancedAttribute_set_bool.vi

  Together the "attribute of niSync" entry "Clk10 disciplining activated ' and the 'value' of coming true, as shown in the picture as an attachment.  The time reference offset must be<10ns and="" constant. ="" give="" that="" a="" try="" and="" let="" us="" know="" how="" it="">

  Note that once you do this, the PXI-6682 will be able to make adjustments to his timekeeper. It will work exclusively on the 10 supplied MHz reference clock. Therefore, if the clock of 10 MHz in fact derive from GPS, there is nothing that the 6682 can do about it.  If you fall into this situation, one thing you can do is set at a time reference to free running, set the time to something that is off by saying that 60 seconds, and then set the time reference to the GPS.  That should put it back on the rails.

  I hope this helps.

  Alejandro

• iPhone 5 s, cannot sync, can not use iTunes app

  Hi all. I'm really tired. I found the wires on both of my two really big problems, but none of the solutions listed seem to work. First of all, I will explain what is happening and then possible factors that may have led to this State. I use an iPhone with iOS 9.3.5 5s.

  1st edition.

  iTunes will not sync with my phone: when I try to do, I get an error that says: "the iPhone doesn't have to synchronize because the synchronization session could start."

  To resolve this problem, I tried, no appreciable results:

  • Reset the phone
  • Restart iTunes
  • restarting my computer
  • Restore my phone from a previous backup, then the synchronization attempt
  • restore the phone to factory, then a backup settings, and then try to synchronize
  • Praying

  2nd edition.

  Maybe the cause of the first problem, or somehow related, is that the iTunes on the phone app is now unusable. This is especially weird because after all these restorations of all other applications work fine! Mail, various games, Safari, line; they work perfectly (well, as they always have).

  But after each restore, when I try to open the music application, it would break. After restarting the phone, the application opens, but when I try to play a song, or even press any button (such as the passage of the "library" to "playlists" on the bottom panel, the app closed immediately.

  According to some discussions on this issue, I tried (again, no no is done):

  • turn on and off Alternatively 'show music Apple' (under settings > music)
  • By clicking 'Join Apple Music' in the same section to access the app from here (in spite of not having music Apple nor any interest in.)
  • force close the app
  • restart the phone
  • all of the above restorations etc.

  But I can not try one of the other suggestions, because they are all trying to sync the phone. For example, it was suggested to delete all the music that the phone is turned off and then put it back on, but I can't do it because I can't synchronize in the first place.

  Cause probable/factor

  All that being said, a likely cause of all this was that recently I have upgraded to iOS 10. I hated immensely and looked for a way back to iOS 9. I followed this guide, using the first method: http://www.pcadvisor.co.uk/how-to/mobile-phone/how-downgrade-ios-10-ios-9-reinst all-ios-uninstall-3618122 /and it seems to work perfectly, until I checked iTunes and encountered the problem above.

  Now, iTunes has been download iOS 10 in perpetuity for awhile and the "Restore" button is no longer available even on my iTunes (on the computer) screen, so even if I wanted to give up and just go to iOS 10, I can't. I also really, really want to do.

  Please, is it possible to get my phone to the operation just as it used to? Music is one of the most important functions for me. Any ideas beyond what I tried would be greatly appreciated. I just want this thing to work...

  I'm having EXACTLY the same problem, only with an iPhone 6.  All started with iOS 10.  He hated, tried to return to backup iTunes had stopped communicating with my phone, and it had to be updated to 12.5.1, which was beyond the capacity of my OS (10.7.5).  Long story short, I installed 10.9.5 now and updated iTunes to try to fix my phone, but it gives me the above message "synchronization session was able to start.

  Certainly, to pass any message from iTunes is a slight improvement over what WAS the case, but this is ridiculous.  A patch needs to be done and QUICKLY or we would start better see some kind of compensation.  $1600 and $3700 iMac iPhone and neither are what they should be, what they were doing, there is a single day.

• Impossible to download or sync music from my library using the android app Apple music

  I'm unable to download or synchronize my library of Apple's music on my device Android in-app music Apple.

  I've been using music Apple on Android for a few months, but has recently shifted from a Nexus 5 to a motorcycle G4.

  I installed the Apple music app and logged as usual. When you select the my music option in the menu, the app has attempted to update my library but gave a message 'don't miss not a Beat - find your Favorites and add them to my music, then come back and enjoy them here '.

  I already have hundreds of songs in my music that I can access my desktop and access on my Nexus 5 institutions.

  I tried to add new songs from the application, but this will not happen. Neither the app let me download all the music section to browse.

  I can listen to music, but not to download and sync.

  No matter who else facing the same problem? Or someone who can suggest me a way out?

  Hey there AppleUser_4491!

  It's really nice to have your Favorites saved in the app Apple music for easy reading. If you do not check the steps described in this article: get help with music from Apple on Android - Apple Support

  Try to restart the application first:

  Restart the application

  Most of the problems solve if you leave the Apple music, then re-open it.

  To ensure that the application is completely closed and all background processes are stopped until you reopen it, follow these steps:

  1. In the home screen, tap applications.
  2. Press settings.
  3. Scroll down to Applications and press 'Application Manager'.
  4. Press Apple's music.
  5. Press Stop Force. If you see a message that says "If you force stop an application, it can lead to errors," press OK.
  6. Return to the home screen or in your applications list, then reopen the Apple music.

  Let us know how to work the steps described in the article.

  See you soon!

• How can I sync my iPhone with my mac mail

  iPhone 6s (iOS 9.3.4), McBook Air (El Capitan 10.11.6)

  How can I sync my iPhone with my mac mail without using iCloud?

  I use several 'GMX' and 'Web' of e-mail accounts.

  When I send email from my iPhone, they are only saved on it, but neither on the (GMX / Web) server or on my Mac.

  For e-mail accounts to synchronize between devices, they must be configured as IMAP accounts. POP protocol doesn't have this capability.

• cannot sync my email, it says to use an updated browser that I did, but still cannot get it to sync

  what I put up a new e-mail account, because I thought that I could sync it, but I connect to my account and it says: not verified email account, so I check and send it me email account on internet explore, and when I open and try to verify the account he said I use an outdated browser. My Firefox browser is the most recent but I can't sync my email so I still keep internet explore just to check my email on the computer. Am I crazy or I do something wrong?

  I do not understand the synchronization of your e-mail account.

  First of all, neither Firefox nor IE will make 'e-mail. But they both will allow you to access your e-mail via a Web webmail site.

  In order for Firefox to check your configuration of the synchronization, you need to access the e-mail that Mozilla sends you to activate an account in Firefox when using Firefox. Then when reading this email in Firefox and click on the activation link in the email. You can try copy'n "paste from IE [and your webmail] in Firefox and see which would work, but it has not worked for me, a few years ago, when I tried with an older version of Firefox and version 1.1 of the previous synchronization."

• Two computers connected to the same account sync will not sync-ing

  I have two computers and an android device. I have set up A computer with sync, and it connects to a device and a virtual machine running in the computer, without any problem. I have another device that is not synchronized with them. It seems to be loged on the same account of Firefox. If I click Synchronize under preferences tab, all the options are checked and the account name is displayed. However, neither the favorite nor other data seem to be in sync to the device. Any thoughts?

  Hi ohnoplus,
  Thank you for your question. I'd be happy to help you explore this question with you. Here are a few troubleshooting steps that we can take:

  1. Please make sure that the version of the browser on Android is superior or 29.
  2. Please check in the accounts that there is no (obsolete) account.
  3. Please also try to remove the account, add once more
  4. Please, I beg you, then take a test and add a new bookmark, password or something on behalf of the Fund. Click on "Synchronize now".
  5. Set the account and synchronize it manually in the menu account on the mobile device.

  Note it may take a long time to synchronize on the first time, but please post back with the results and if there are errors, then, we can allow error logs.

• Can't get the sync to android to work - articles seem obsolete

  Hi, the articles on Mozilla on sync appear to be updated. Neither does match what I see on my screen and I have the latest versions.

  I don't see a link synchronization code when I go into the menu to sync on my pc.
  I'm also going to the top right menu on my android and the sync on the next screen button has no effect.

  Banging my head against the wall now. No items match what I see on my pc screen or on my android screen.

  My android also told me that my account login details are wrong even if I am logged in using the same info on my pc.

  Help, please. Thank you

  This article contains information for Firefox 29 + desktop and android. https://support.Mozilla.org/en-us/KB/how-do-i-set-up-Firefox-sync

• Cannot sync. -Com port in use error

  Win7 64 bit, PalmDesk 6.6.6, IR USB dongle. Tungsten E

  Has been able to synchronize the first two times with the new IR USB organization. I ended with triple calendar entries so finally was able to remove old items out of PalmDesk and after doing a hard reset on PDA, could clean the scheduling issues so I thought everything was OK.

  Then tried another HotSync and kept getting an error on the PDA "Cannot start the HotSync operation because the port is currently in use by another application"

  Spent 2-3 hours to get here and other sites for possible solutions. Found none so tried to Soft Reset and then reset hot but neither worked. Finally I did a Hard Reset.

  Was able to do a HotSync.  It took 6:30, but it does not seem complete.  Note that my memory is only half full

  Now, the real problem.  I wanted to see if I could do a HotSync and did not take hours to complete.  But still, I get the port in use message.

  The message comes even if the PDA is not connected to the PC by IR isn't something in the PDA.  He was going to install dbFix, but since I can't synchronize I can't install it.

  I note that after the Hard Reset did only 3 options under connections now, I have 6. There is an IR to a PC/handheld, but the details show that it uses really Cradel/cable. There is an infrared for GSM phone but I can not remove or change it. Also of IR to PC with a speed of 28.8 by default.

  Solutions, ideas or even wild guess appreciated.

  WyreNut

  Thanks for the reply, but you are not the first to suggest not correctly the problem was in the PC.

  I have finally resolved and am posting the investigation and the resolution here in the hope that others can solve the problems of strange synchronization they could find out by doing a similar detailed investigation.

  The error message not being able to sync because the com port has been used pop up would immediately after recording HotSync. I without having to be connected or even close to a PC to get this error message. I have confirmed that being in front of PC with IR, equipped of Vista 32 bit, so it wasn't a problem with Win 7 64 bit either as I had been able to synchronize PC Win 7 approximately 4 weeks earlier.

  I had 4 chat sessions with Palm TREES, where they provided a number of suggestions essentially to tell me that the problem was Win 7 based or 64 - bit based or that I did a Hard Reset if fixed (none of which were correct).

  I tried a number of sweet, hot and hard resets. The only time wherever I could sync was after doing a Hard Reset and synchronization takes then 3.5 HOURS to complete. I could never do a second Hot Sync that I always get the error message.

  I finally discovered that the list of connections is changing and the individual setting for one of the original connections was changed when I did the sync.

  After a Hard Reset, there are three connection options:

  PC Via cable/home station, Modem Via station home/cable and IR for PC/handheld Via infrared

  When I ran the Hot Sync more than two connections have been added to the list

  IR for GSM and GSM BUT phone serial

  The surprise that took a few moments to discover that the PC/handheld Via IR computer had its details changed to home/IR obviously cable station, I could use this connection to synchronize this is to create a custom connection which was the PC Via IR.

  The dropdown under HotSync would present the old PC/Pocket PC Via IR, but it does not work because he didn't was more IR I would choose the custom, but he made the mistake of com Port conflict

  The SOLUTION was to delete all backup and archiving files, install the PC off, do a Hard Reset of the PDA and then do a HotSync.

  This time sync took only 5 minutes, the connection list has not been changed and the settings in detail for PC/handheld Via IR were not changed.

  I don't know when the commands of GSM phone has been added to the list of options on the PDA, I never used the PDA as a phone. I'm not even sure who's App adding the GSM phone files. He could have been there for years I never had problems with synchronization with USB port and a XP machine. Even the first synchronization IR on Win7 64 bit machine worked so I thought everything was OK.

  Thanks for the suggestion anyway.

• All iOS Devices "allow access" but will be out of sync

  Hello

  I have a 2 Air iPad & iPhone 6s, using iTunes on Windows 10.

  I always sync my devices by USB. I have not synchronized each device in a few weeks. The two iOS devices running iOS 9.3.1.

  For some reason any when I plug in a device, under Windows it warns me that 'Apple iPad' (or iPhone) is plugged in (not his name), and then on my iPad/iPhone, it asks if I want to "allow access". Neither the source device list appears in iTunes and therefore cannot sync my devices.

  I have synced with this installation of iTunes on this computer many times before, so I'm not sure why this is happening now.
  I have deleted my iTunes twice lockdown folder and restarting computer & all my devices.

  Can anyone suggest a solution?

  Thank you!

  Ash

  Problem solved. The following steps are taken:

  Reinstalled the drivers:

  Plug in Device iOS

  Open Manager devices (search in the start menu)

  Portable devices - right click on the Apple iPhone and choose Update driver software.

  Go to C:\Program Files\Common Apple Mobile Device Support and choose the Drivers folder. Click OK.

  Click next to reinstall the driver pack.

  Synchronize now works as usual.

  Hope this helps anyone who is going to search for.