NEST

Similar Questions

• Cam nest excluded Homekit?

  I can only assume, because of the competitive relationship between Apple and Google, but I'm really disappointed to see that the family of nest products is excluded from Homekit.

  Stupid decision, because I do not know that I am not alone to already incorporate the nest in my house and using the app to nest on my phone.  I guess they wanted to be sure that homekit was completely irrelevant for me...

  Google and nest products are in direct competition with Apple and their proprietary Home Kit.  Google paid $3 .2b for nest laboratories and has used to launch Google home.  Completely secure communication protocols different use of two technologies, so are not inherently compatible and nest will be redesigned specifically to be. Google doesn't want you to use the nest with home kit - they want to you use the nest with their system.  Time will tell which competitor wins in the end.

• Can I create nested address lists?

  I want to create a game of skill nested lists so that I can manage a group large enough contacts in an organization of volunteers with a hierarchy, much like how I manage contacts work with MS Outlook (sorry for mentioing the competition!). I tried to add an existing list (let's call it List1) on a new list (let's call List2) which must also conduct additional individual contacts. When I do this, "List2" shows the individual contacts and "List1" when I select for the ' to: ' line in a new email, "List2" seems OK, but when I send the mail it is sent only to individuals and does not go to the members of "List1".
  I do something wrong or Thunderbird does not support this?

  There is a bug, ask the nested lists, but he's 15, ranked when he still was Netscape. https://Bugzilla.Mozilla.org/show_bug.cgi?id=40301

  More importantly, it is in the list of features for all. https://Bugzilla.Mozilla.org/show_bug.cgi?id=841598
  And important blog posts to explain it. http://mikeconley.ca/blog/tag/ensemble/

• Firefox starting with window nested after update to v.25.0

  When I start Windows Firefox start with nested window interface. If I close and run firefox again starts just fine.

  http://easycaptures.com/FS/uploaded/809/5563680305.PNG

  I found the reason of this problem.
  Tab Mix more-> Enable crash recovery.
  Problem has been resolved by disabling this option.

• an easy way to bookmark, choose a nested folder structure

  When you choose bookmarks to a nested folder, it becomes a bit of a chore because you need to click on in the same way in the folder for each selected bookmark.

  Internet Explore has the ability to retain the folder chosen last bookmark of and offer this same folder again when you click the bookmarks for 2nd time button and the following.

  Firefox to be able to open all the bookmarks (in the form of hyperlinks) in a html window. It is no longer possible.

  I know that you can open all the bookmarks in a folder in tabs separated with a single command, but this isn't really what I want.

  You have 2 options:

  1. Use the bookmarks - CTRL + B to toggle the bookmarks open or closed bar. So the path to the nested folder remains open in the sidebar until you close the path by using the "-" to the left of the nested folders.
  2. To display the list of bookmarks HTML in a tab, type chrome://browser/content/bookmarks/bookmarksPanel.xul in the address bar in an empty tab. You can also set a bookmark or your home page to do this for you.

• Firefox 8 displays the source at insead nested HTML IFRAME

  I got IFRAME nested for a few years, Firefox and other browsers display them without problems, but today with Firefox 8, I see the HTML source of the embedded iframe. My test scenario had a graph of Google in it, but because it is only the display of the HTML, I guess that the content makes no sense. I was about to create a test scenario, but I found that my editor (tinymce) is a failure also probably for the same reason.

  Looks like I answered my own question. The nested iframe did not have a header. Once I added my standard header, it worked. Firefox should get selector on the headers in the iframes.

• iCloud photoalbums nested library.

  I suspect that I see the same thing as everyone else, but thought I would check.

  I don't see any albums nested in the new feature from iCloud photo library. They are not quote without their enveloping folder, but they aren't there at all.

  I see the same thing. Only my level "Home" albums are visible.

• Protect nest wants several ports per device IP address

  Hi all

  Rather a strange this...

  I have 4 x nest protect smoke alarms or fire.  All seem to work properly and talk to each other.  I THINK (but I'm not sure) that they connect to nest/Google Internet because the software was getting updated.  So I do know that I have a problem to solve...

  I have configured each of them to have a static IP, and I put the port forwarding for each IP address to have Public and private TCP and UDP ports 80 for device 1, 443 for camera 2, 9543 for unit 3 and 11095 for unit 4.  These port numbers were given to me by the support of nest.

  BUT - when I asked for confirmation that these four setting was correct, I received this statement:

  I understand that you have assigned port 80 of your first protection, 443 to your second Protect and 9543 for your third Protect (or a variant of it).

  Please forgive me for not giving you a complete example of what you need to do before that. As I said in the paragraph above, all ports apply to all devices.

  So if your static IP address for your 1st Protect is 192.168.1.10 will be assigned TCP + UDP 80, TCP + UDP 443, 9543 TCP + UDP and TCP + UDP 11095 to it.

  You must then do exactly the same for the following 3 nest protects you have. Thank you this is a bit tedious, but I assure you there is no additional configuration required for this.

  How is it possible to assign 4 ports on a static address of P?  When I asked this with the assistance of the nest, the response was "I'm really sorry to say this, but it was already not my support framework to help you as I have with the router I was using personal knowledge of port forwarding and hoped that it would be possible for you to apply my instructions using the provided Apple of instructions that I shared with you"

  Ideas anyone?  Or should I just leave it alone because it wouldn't even be a problem to solve?

  
  

  So if your static IP address for your 1st Protect is 192.168.1.10 will be assigned TCP + UDP 80, TCP + UDP 443, 9543 TCP + UDP and TCP + UDP 11095 to it.

  You must then do exactly the same for the following 3 nest protects you have. Thank you this is a bit tedious, but I assure you there is no additional configuration required for this.

  How is it possible to assign 4 ports on a static address of P?

  To assign multiple ports to a single static IP address, just enter each required port followed by a comma, for example:

  Public or TCP ports: 80, 443, 9543, 11095

  Public or UDP ports: 80, 443, 9543, 11095

  However, you cannot assign the same ports for multiple static IP addresses.

• Questions of Orbi and protect the nests.

  I use Orbi for a few weeks and so far no problem. Until today, when I realized my nest protection (fire alarm) is not connected to the network.
  I did a full reset on the nest, I could see the network 'nest' on my list of wifi on my iPhone, but it expires then said I have no network at home. And I do. Given that everything else works.
  Technical support nest is quite usuless. They will tell me just that Orbi isn't on the list not supported. (Because they don't know what it is).
  Any ideas?
  PS: I am connected through Fios.

  I'll answer my own question, as I understand the problem.

  For some reason, nest the deletion of your account and resseting it does not work. It will not be conn ct to Orbi. But a factory reset did the trick.

  To do a factory reset on nest protect so it does not work with Orbi, just hold the home button until it turns blue. Continue to hold until the NEST begins to tell you it's serial number. Release the button before nest is done reading. You will be asked to redo a complete set, and with the large network of Orbi, it worked like a charm.

• Airport Extreme a different IP address than the NEST

  Hi all

  I have an Airport Extreme new set up a network of comments.  The guest network is configured for the IP addresses in the 172.16... range, compared to the 192.168 range (which is for the network no comments).

  I put my nest on the network of comments.  I see in the settings on the nest indeed connected to the network with an IP 172.16 comments...

  But, when I look at the Airport utility it says the nest is connected using the IP 192.168... which means it is NOT on the network of comments.

  Something is wrong here - is there a bug in Airport utility, causing this or something else, you know?

  Thank you

  Allen

  Something isn't bad. It is normal, unless you want to call normal a "bug".

  AirPort Extreme uses VLAN technology... Virtual local area network... to provide Internet access to the nest using one and only available Internet connection to AirPort Extreme.  Indeed, the NEST uses the same network and the same Internet connection as your other devices that are not on the network of comments.

• Variable and nested loops

  Hi, I'm a relatively new to programming of LV, so be gentle.

  In a Word, I am running nested loops than the material test power on and off cycles. The parameters for each loop is entered on the front panel of the user. For example, the power supply at the time, how many times to read in the data, power supply off time and the number of cycles power is a typical customer task ask me to do. Therefore, I decided to do a generic as possible executable vi instead of writing code (in which I request is trivial), that my technicians can easily use.

  I want to put a counter - down in this vi, even a journey of one. I'll take the more the off time multiplied by the number of cycles and display on the front panel. For some reason that I can't find a simple way such that when the last cycle ended if poster zero before the program ends.

  For example, the total is equal to 60 minutes and 10-minute cycle. I run the program and the display shows 60 during the first cycle, after the first cycle is complete and the second cycle begins the display turns 50, and so on until that last cycle where you can read 10. Then the program ends and the screen 10. How can I get a last beat of this kind it says 0 and 0 poster before the end of the program?

  Thank you!

  Wire a zero to a local variable of this indicator so that it can turn when the while loop ends.

• nested functions

  Hello I am doing a report with different signals on the axis y and I created a coordinate of curve to show the selected points.

  I don't know how to display the current value of the point initially reported drawn while the coordinate of the curve is moved by the user. I know I can do it with pragmatism once the report is loaded, but I do think that the event signals a report when the coordinate is moved.

  I tried to use the following formula in the text editor and it works separately but when I try to nest them to retrieve the index of the value of x and to match the value of there, it generates an error. Which brings me to my question...

  Maybe it's to nest these two PNo and ChD functions?

  Is it possible to call an external function to be run from the text editor?

  Is there a work around?

  I'd appreciate your help...

  Here's the nested function

  This works...

  @PNO("[12]/[1]",CurrXValue) @.
  @ChD(1,"[12]/[2]") @.

  This is not...

  @@ChD ((PNO("[12]/[1]",CurrXValue)), "[12] / [2]").

  Bertha

  A function is call "User Commands" that allow you to make your own vbs function that can be called to notice or report with the @ prefix and suffix.

  Use of this function must allow you to put together your order based on a vbs that can then be called in your new order.

  Use help to find 'Use of the user controls' for details.

  Paul

• nested loops for speed optimization

  Hello. I need help to optimize for speed (in LabVIEW) code (matlab) following:

  -----------------------------------

  a = rand(1024, 200);
  b = rand(1024, 512);
  c = Zeros (200,512);
  ICT
  for i = 1: 200
  j = 1:512
  c (i, j) = (Sum ((:,i).*b(:,j))) a ABS;
  end
  end
  Table of contents
  end

  -------------------------------------------------------------

  Basically I have two 2d tables, a and b, one with 200 columns and rows of 1024, other columns a 512 and 1024 lines. What I have to do is multiply (dot product) each column a each column of b, the sum and take the absolute value of the result. The output, c, will be an array of 2d of size 200 x 512. Is it possible to do without the help of 2 loops of nesting? The two paintings 2d, a and b\, are produced by my material.

  What is the best strategy to get the maximum speed? I have a powerful enough processor.

  Thank you very much?

  So I looked at this problem, said «seems familiar, but different...» ».  Did a little math, encoded at top and improved the speed by a factor of 100 (with absolutely no parallelism).  How about apples?

  If we let A and B tables 1024 x 512 and 1024 x 200 and turn them into matrices, the problem is (mathematically) the absolute value of the transposed from A times B, where "the times" are the multiplication of matrices.  I "guessed" that NEITHER would have included the Multiplication of matrices in his bag of tricks and maybe optimized, so I coded it upward, adding the calendar.

  Using the first double Lynn - to multiply, sum, formulation of abs and a 'do it as a matrix' on my machine, the Array 1004 msec, the matrix method took 10 msec, as well as the results differ by less than one part in 1 million (I generated at random (0, 1) floats, and made the comparison by subtracting the two tables and checking that the absolute all the differences were less than 1E-6).

  Bob Schor

• How to create a nested local variable control custom?

  I inherited code which has a cluster of CTL control nested inside another group of control CTL.  If I drag the control nested outside the border of the other, I can right-click to create a local variable, I need to connect to the bundle name.  However, as soon as I drag the inside the limits of external control, it breaks the local variable.

  How can I create a local variable in a cluster THAT CTL nested in a second group CTL?

  Is there some kind of reference OuterCluster.InnerCluster, that I can use if I do a local variable of the external group?

  It turns that I need a local variable for the cluster internal.

  JPG attached shows that I created a local variable for the external cluster (ParametersCluster), used a Unbundle based on the name to access cluster internal (EmptyParmeters) and can access one of the elements through an another Unbundle by name.

• Generation of loop infinite nest

  Hello

  I have tried to create a nest of infinite loop For TestStand and stuggling to find a way to do a little.

  If you see the attached screenshot, the program runs to each index of the table, for loop 1. There is another loop For loop 2, with the Start/Stop/not inside the loop For For 1. Execution stage element is the index of loop nest, for example, Array Index 2 will start at 5, go to index 1 and run the loop (from 0 to 10 in step 2 and here at every step, he goes back to the Index 0 and run the table. When finished will return to index 1 index 0, and go well the loop. The same systematic for the Index 2 at each stage will be index 0 or everything he has the value).

  In LabVIEW, I can just set it to re-entry VI and feed in the index of the step to execute, but how can I do this in TestStand?

  I really appreciate the help in advance.

  Best regards.

  tlee16 wrote:

  Thanks for the response Doug.

  So I have the sequence (with levels who read from a variable) and wants to call itself its own sequence but with different values in the variable (at runtime, called sequence data passed in this sequence should not replace the sequence of the appellant), how can I implement something like this? Is there a way to check where the sequence has been called since then? or maybe some sort of entry stamp can I write/pass data entry in the sequence? Maybe I should change the way of how it is written/designed...

  Thank you!

  You must use "by value" settings of your variables. To create these settings, insert variables in the setting of the display of the variables group. By default, they are "pass by reference", to change them to be passed by value, right-click on the variable parameter and uncheck the option menu "pass by reference". The variables that are passed by value are passed as in the copies of the original, everything changes for them in the order does NOT affect the original versions in the calling sequence. However, if you want to be able to pass data in the sequence they you need to at least some of your settings to "pass by reference" so that changes made to the parameter in the subsequence may be returned to the calling sequence.

  Hope this helps,

  -Doug

• Can you have multiple nested DAQmx writing VI?

  Hello everyone. I'm pretty new to Labview and am trying to find the best way to manage several instructions 'if' using a table of clusters and outputing to the various pins on a data acquisition module. Going to work to have a dozen DAQmx live write in the nested case statements, or will it cause errors?

  The goal is to take the entries by the out of control and front panel based on schedules and user input values. Any suggestion would be appreciated.

  I thank very you much in advance!

  James

  Of course, you can have several writing VI DAQmx.

  Here is a tip that will save programming time you:

  The Index Array feature is re-sizable!  You don't need to break a wire table and 4 tables to Index and thread of the constants for each of them to get the individual items.  Just drop a, and then drag the bottom of the knot to the bottom until you get 4 outputs.  By default, they start at 0 and increment by 1 when you get off.  You will get the elements 0, 1, 2, and 3 without having to associate the constants to the index entry.

  I also recommend that, instead to use local variables, you keep the table of boolean in a thread that runs through all cases in a shift register.  Just replace the item array for any element of the array you are editing in a particular case.

  I have also modeled the code, you have no need for dozens of instructions box nested.  For example, you have one ON and OFF cases in one of the nests.  I'm assuming that the only difference is that you are wiring is real or fake.  Wiring just the Boolean value.  Various other code is duplicated between each case.  The same for the upper levels of the nest.  If you write to the acquisition of data in all cases, who move outside the structure of the case and just control what Boolean values to change the Interior structures of the case.