Netflix streaming interrupted by my Photosmart 6510 installation

Similar Questions

• Network Installation unsuccessful Photosmart 6510 Windows XP

  Wireless printer: HP Photosmart 6510 B211a

  Router: Netgear WNDR3700, 802.11 g, WPA2-PSK

  Windows XP

  Photosmart 6510 series driver and SW ver 24.2.0

  When I try to install the driver, the Setup program reports "installing network without success." The installation program detects the printer, but does not end.

  The printer has network connection. It responds to ping, it works with HP ePrint, it displays Web pages on its IP 192.168.1.2. Test report wireless says that everything is OK.

  I uninstalled and reinstalled several times without success. Always the same problem "network unsuccessful installation.

  I'm looking forward to advice on how to solve the problem.

  I rebooted the router and re-installed the driver. Network installation has always fails. So I ran the Print utility and doctor Scan. Printing and scanning doctor found that the driver was not installed and advised me to download the driver from the HP site package Support & drivers.

  I downloaded and installed by using the downloaded driver package. The installation was interrupted by a Win32 exception:

  

  I installed the driver once more (without uninstalling), now with SUCCESS! My Photosmart 6510 is now running.

  Thank you!

• HP Photosmart 6510 B211a unable to Scan

  I have a HP Photosmart 6510 B211a e-Print wireless printer/scanner, that I use with my desktop version of Mac OS X Lion 10.7.5 (Mac Mini) and, with the help of Parallels Desktop 7 for Mac, I use it with my Windows 7 PC.  I am not able to scan from my HP Photosmart 6510 to my PC and not able to scan from my PC to my HP Photosmart 6510.  Moreover, I am able to scan from my Mac to my HP Photosmart 6510, but unable to scan from my Photosmart 6510 to my Mac.  I want to be able to save scans on my PC (and not only on my Mac) and be able to scan from my HP Photosmart 6510.

  Also, I am able to print from my Mac and PC.  The State of the results of the wireless network Test, "no problem found.  Congratulations on the successful your printer wireless installation. »

  "When I try to scan from the HP Photosmart 6510 as a document in the file, I get the error message"Unsuccessful Scan"and"... the States please make sure that your computer is connected to the printer and try again. "When I try to scan from my PC (from measures taken by scan - scan a document or photo), I get a long error message title 'inaccessible Scanner.  I temporarily turned off my Mac and PC firewall, but I always encountered these errors.

  Recently, I changed my phone LAN Ethernet line.  Before this change, I had no problem (at the beginning, when I bought my Mac Mini and Parallels Desktop 7 for Mac, it was very difficult to get printing and scanning to work).  Now I don't know what else I can do other than HP Photosmart 6510 to uninstall and reinstall.  Before I do, I want to know if there is anything else I can do, and if someone else had a similar situation, especially those who use Parallels Desktop 7.

  Good news!

  I was not contacted Parallels, I found another HP discussion not being able to scan.  Embarrassing, I also realized that I never properly uninstalled my printer/scanner on Windows and Mac.  Firstly, I correctly uninstalled (i.e. completely) the printer on Windows and Mac, I reinstalled the printer for Windows using the floppy disk, found the site to download the latest firmware of HP, software and tools of the diagnostic utility (http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=5058336), reinstalled the printer for my Mac, run the tool of diagnosis utlity for printing on Windows (strange that it showed was installed my network printer but gave me an error that it) was not installed, so I clicked 'install'), and finally, I ran the scan on Windows diagnostic utility tool.

  I am now able to print and scan without problems.  Unfortunately, whenever I do a major change (upgrade of Parallels or MAC OS), I must start the process again.  At least now I have the process documented for future use.

  Thank you for your patience and your help.  I am ready to close this discussion as resolved.

• Photosmart 6510: Photosmart 6510

  I recently bought a new laptop and I would like to install my printer Photosmart 6510, but can't find the software anywhere CD. Is someone can you please tell me where I can download the software/driver for it. Thank you

  SickNTired,

  To - Some of the Support pages have been kicking around recently.

  Here's a direct download link:

  HP 6510 V28.8 PS6510_1315-1

  Installation instructions remain the same.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Photosmart 6510 will not work wireless

  I just got a new 6510 Photosmart e - all in one printer which works wireless.

  I have a macbook pro, which is update 10.7.2 (I think I'm in maybe 1 or 2). anyway I'm on Lion

  I noticed when I opened my printer it had a slip that says: if I lion, do not use the installation disc that comes with it, but to use the one online, so I did.

  I had to connect my printer via the usb port on my computer because after switch on and its connection to the wifi in my house and enter my password and connect and have even tell that I am connected to the network, it wouldn't show if I tried to print from my laptop which is connected to the same wifi or my iphone 4 which is connected to my wifi.

  so after I connected with a USB and installed all the software and setting up to print wirelessly, for the instructions it tells me to unplug the usb cable (after that he told me that the printer is ready for wireless printing and it is connected and the printer is installed on the computer and everything). If I unplug the USB stick and then he says that he cannot find the printer. It is said to make sure that my printer is connected to a network connection and my computer is connected to the same connection and click on 'Retry '.  they are both connected to the same wifi at my house, and it continues to make me press 'Retry '.

  even research on my printer, on the screen, if I go into the wifi settings, it says that it is connected to the wifi in my house.

  my computer is connected to the same wifi and wifi doesn't work, because I am able to be online.

  I tried to do all troubleshooting HP provided on their website, and I have uninstalled and reinstalled the printer about 4 times. I stayed until 03:00 last night working on this and still cannot get to work.

  If someone could help me here please. I'm one step away from taking a day off, so I can call HP and tell them on the phone about it but I don't know who will be an event of the day.

  When I have the printer connected via usb it works perfectly fine. everything works. but the second I unplug, I can't find it on my computer and I can't find it on my iphone 4. my computer is connected to the wifi but my printer says that it is connected to wifi (I even unplugged the wifi printer and reconnected several times to ensure that I was connected and I am).

  Hi bradywurtz,

  If you open the preferences system - Print & Scan, the printer has a host name in brackets behind the name of the printer (for example: HP Photosmart 6510 all-in-one [G53D42])?

  If this isn't the case, then the printer in the print queue is for a USB connection, and all what you need to do is:
  1 remove the inscription of the USB
  2. click on the '+' to the bottom of the list (the white box where the printer was included)
  3. find your 6510 (connection type should be Hello)
  4. Click to select your printer, and then click Add.

  Given that you have plugged in USB and downloaded the drivers, you must have the latest drivers - but just to be sure, it would not hurt to run the software update and check and updates of HP driver Bundle (the last being 2.8).

  Please let me know if this does not solve the problem and I'll work with you more on this.

  Thank you!

• Photosmart 6510 does not communicate wirelessly with Mac 10.8

  I have a photosmart 6510 and an imac on 10.8

  Both worked very well together, with all functions wireless works very well, until two days ago.  Two days ago, I changed my ISP and I have a new router. My mac and printer are connected properly to the new router, but they don't communicate wireless now.

  I am able to print the wireless network test results and everything seems fine.

  But when I send anything to print I get a message saying that the printer does not communicate or can't find the printer.

  So I uninstalled and reinstalled the printer drivers and all of the HP software. Everything was fine - the installer sees the device when the usb cable is connected, it indicates that the device is connected to the correct network and upon request I have unplug the usb cable.  But then I get an error warning:

  Device not found on the network:

  Wireless network settings were downloaded successfully on your device. However, your Mac could not locate the device on the network.

  Please make sure that:

  • Your Mac is connected to a wired or wireless network that has access to your device.

  • Your device is connected to the network wireless "TALKTALK".

  Click on "Start over" to try to connect using the current settings. Click 'Go Back' to enter different settings.

  And at this time, I'm stuck.

  Can someone advise please how do I get the printer to work again wireless?

  Thank you

  I think I've solved. restore the factory settings and then reconnected and the corrected IP itself.

• HP Scan does not work on Photosmart 6510

  HP Scan does not work with Photosmart 6510 wireless installation. I've deleted and reinstalled SW, SW, ran update doctor Scan and everything was reported OK. When I ran the scan test of the HP scan window comes but there is no value in the resolution box. When an analysis is attempted, I get ERROR SCAN only. I can scan successfully by other scanning programs.

  Paul sent me the log files, and from there, we followed the question until for the binary file HPScan.exe incorrect compatibility settings.   This file is located either in your "program files (x 86) \hp\\bin" directory (for 64-bit systems), or "program files\hp\\bin" directory for 32-bit systems.   In the case of Paul, his EXE was created to ensure compatibility for XP, which caused the application to try to use WIA 1.0 on a 2.0 WIA (Windows 7) system support.    This caused the app to not to interview the drivers for supported resolutions/etc and so the drop-down list is empty in the implementation of the resolutions.

  If other people see empty resolution lists in our application, it might be useful to double check that your EXE is not set to XP compatibility.

  Thank you

  Jeremy

• Photosmart 6510 - Windows 7 - I need to the Port ID to set up my modem for wireless connection

  Printer: PhotoSmart 6510

  Operating systems: Windows 7

  Modem: Huwawei E586

  The printer configured easily to the modem for wireless connection.

  The problem I have is that my laptop cannot see the IP address of the printer when I try to configure a wireless connection.

  I am trying to add the IP address of the printer to the virtual server from the modem list.

  What is the PORT ID required by the printer?

  This information is not in the installation notes.

  I found it. It is Port 9100

• Photosmart 6510 straight cut of the page

  Hello

  I'm on a macbook with OSX 10.5.8 with a Photosmart 6510.

  Installation went without problems, but when the right side of the print documents are cut despite the margins are the same on all sides.

  Subject of PDF, it seems as it should, it is not simply print as it should - miss me the right +/-1 cm from the paper.

  PS

  Also I would like to print aligned in the Middle, which - however - perhaps a Preview of Mac problem. However, ideas are welcome...

  I already tried all these things, but I discovered as the duplex unit being a little strange ITMIS. I noticed that it cropped only the last printed page - so I just added 2 empty pages at the end and it worked.

• I have a photosmart 6510

  Wirless test - PASS results

  Installation software detects the printer on the wireless network but it will not install.

  Firewall has been disabled.

  Router Channell has been changed to 11 (tech support suggestion)

  Always the same resulting message:

  Cannot install printer on network.

  -HELP or it goes back to the store.  I need this to work...

  I found a solution!

  refer to this post...

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/Photosmart-6510-won-t-work-wirelessly/m-p/1078971#M23503

• HP Photosmart 6510 series connects to the network and Internet, but not the computer.

  Hey all,.

  I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

  I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

  No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

  Hi old_geekster,

  You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• HP Photosmart 6510 e - all-in on: print a picture

  I want to print on paper photo of android (Samsung Galaxy S6 edge).

  The printer is set to ask what tray. Nevertheless, it prints only on plain A4 of android.

  I used the build-in print function the and place paper 4 x 6 inches, the papertray photo value and finally used the application e-print and paper Photo Paper Type value!

  Any help would be appreciated!

  As I mentioned in the op, I tried the HP e-print application.

  But I found a solution, instead of choosing the Photosmart HP 6510 directly (with ip address), I chose Photosmart 6510 with l'[email protected].

  Apparently printing via hp service it does not accept the chosen paper size (4 x 6).

  It works:

  

  But it does not work:

  

  Any other suggestions?

• How can I create custom with the Photosmart 6510 printers paper sizes

  I want to use paper sizes personalized with Word or Photoshop.

  I have a Photosmart 6510 printer all-in-one.

  While I can find the custom size tab layout in Word and can set this size, I don't seem to be able give the new size a name or save it.

  Is it possible with this printer, or is there a workaround to avoid the message 'paper mismatch '.

  Thanks for the ay help I can get.

  I'm sorry not to come back earlier.  I stumbled across a work around for this problem.  Use a different print driver for the printer.  I'll link the instructions below.  Again, sorry I don't come back with the workaround as soon as possible.

  How to assign other drivers to print in different Versions of Windows

• Photosmart 6510: photosmart 6510 prints blank pages

  Printer was working fine.  Had to change the cartridge. First of all, I didn't have black and now I don't have much color either.  The printer says I had no real HP though now it shows that I do. I never bought my cartridges anywhere but the staples.  Printing October 2012 have changed many cartridges before you buy.  Followed everything I could find.  Still not printing.

  Hi @mjohns390,

  I read your post and see that you can not print in black or color now. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document is for the cleaning of the cartridge and the contacts, check the tab on the cartridge and the printer reset. "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" message on the c...

  If the problem persists, perform a power reset. A alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing. Do not take into account the title.

  This model has a permanent print head, this video shows you how to access the print head, so you can manually clean the printer and soak the printhead, it's my own personal recommendation, not one of HPs, is to use the solution proposed in the following videos.  I suggest only doing this if the printer is out of warranty.

  Once you get to the clock at 3:20 minutes, you can stop this video.

  Разборка HP Photosmart 6510 (disassembly Photosmart HP 6510)...

  This video is for a different model but it will provide the steps to move the print head and cleaning, also if you continue the video it will provide measures to remove the print head and soaking. Play video 01:24 minutes. HP 5510 will not print black and color - print head removed and cleaned.

  If you have completed all the above steps and your product still has a problem, service the product.

  I hope this helps. Let me know how make you out. Thank you.