Network adapter/USB Port on Windows 7 problems

Similar Questions

• Impossible to install the wireless network adapter TP-Link on Windows XP Pro error "insufficient system resources exist to complete the requested service"

  Hello

  OT: I can not install my wireless adapter TP-Link on PC under Windows XP Pro. I continue to receive messages from "insufficient system resources exist to complete the requested service" after each reinstallation
  I had this problem since I moved into my new house two weeks ago. To my old place, my pc is connected to my router via a network cable, so everything was fine and dandy. However, to my new place, with a network cable is just not possible, so I use a usb wireless adapter to connect. I bought a TP-Link Wireless N USB Adapter (model TL-WN727N) and I can not installed.  First, I installed the software using the CD-ROM of resources which is come with the product then connected the adapter wireless on my usb port at the back of the pc. It detects the device very well, but when he wants to install the driver of this message displays "an error occurred during the installation of the device. Insufficient system resources exist to complete the requested service". When I opened my device manager, a yellow exclamation mark under Network - 802.11 n WLAN cards there. In this window, I tried:!. the driver update (latest driver same downloaded of the site Web of TP-Link) 2. Disable the device (nothing happens) and 3. Uninstall (which I just can't because another message "failed to uninstall the device. The device may be required to start the computer"is displayed). All three failed to install my wireless card. I am out of resources here, so any help is greatly appreciated.
  My PC specs:
  AMD Athlon (TM) II X 2 245
  2.95 GHz, 3.25 GB of RAM
  Windows XP Professional version 2002
  Service Pack3
  Thanks in advance.
  concerning
  gas

  T-Link support tried it yet?  http://www.TP-link.com/en/support/contact/

• The upgrade to 2.0 for a wireless adapter USB Port work

  Hi, I just bought a USB network adapter wireless, I was able to configure my laptop but when I plugged in my USB Port, I got a message that he needs one more USB 2.0 Port and I must improve my USB port to make it work properly, how can I upgrade my USB port at the top level? Thank you and hope you can help me with my problems... Alice

  Hello

  As Flo don't say, no chance to upgrade the USB ports.

• Microsoft welcomed the missing network adapter after upgrading to Windows 10. Help, please!

  I can no longer create a hotspot since I updated to windows 10. Microsoft hosted network adapter does not appear on the device manager that I can't fix by using the suggestions google gives. This is stressing out me!

  It is a driver problem. You can open a command prompt and run netsh wlan show drivers and see if she takes care of a hostednetwork. Update to the latest version of the driver from Acer. If Windows 10 retains the same bad driver installation, I recommend you do decline to 8.1

• Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

  I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

  Hello

  1. what happens when you plug the device to your computer, you get an error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1:

   Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• * USB ports and my printer problems

  My laptop is Windows Xp edition sp2 family.

  My old HP laptop computer of 4 years has 4 USB ports. Unfortunately, 3 of the 4 ports broke physically, so I only have a single functional port.

  A port that works cost of my cell. So I know it works. But now, only 40% of the time it will print when I plug my 750 HP printer all in one in it.

  Otherwise, it will display a "?" on the printer in the taskbar icon. Once, I unplugged the USB cable and plugged into the broken USB port holding it still and it actually print my papers.  But as I said I have been lucky that day cause these 3 ports are broken.

  What can I do to make the only port 1 have, can work for all devices I. It seems not only act with the printer.

  In addition, supplants ports broken something painful, costly or difficult to do? I know it can vary depending on the brand of the phone... But overall, it might be an easy solution?

  Thank you all in advance...

  Hello
   
  Method 1.
  Let us run the fixIt in the article below and check.
  http://support.Microsoft.com/kb/925196/en-us

  Method 2.
  Let us, remove and reinstall the usb controllers and check.
  To remove and reinstall all USB controllers, follow these steps:
  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
  b. click on the Hardware tab.
  c. click the Device Manager button.
  d. expand Bus USB controllers.
  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  f. restart the computer and reinstall the USB controllers.
  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.
   
  Reference:
  Advanced troubleshooting tips for General USB problems in Windows XP
  http://support.Microsoft.com/kb/310575
  You can also download and install the dricers from the link below.
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=295845&prodTypeId=18972

  It is an alternative to repair broken ports, you can purchase a usb hub, you can insert it in the usb port that works, and then use the available ports on the hub. Find out the nearest computer to usb hub store.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Blitzz Super G PCI wireless network adapter works only in Windows XP SP3

  I looked for answers to this, and it seems that all they are pointing to the same question. Grave wireless network adapter failed after the Service Pack 3 update. My question is the same thing, I can't get the updated drivers (I have the original installation software, but they face STOP Installation) at some point, the OS would hurt identify the device that the atheros wireless network adapter and it worked but now nothing. Right now, I would like some clarification.

  1. how to fix this?
  2. why Microsoft has not fixed the problem? If it worked in SP2, why don't you just restore the defective file. I understand the WLANAPI. DLL is the main culprit and yet once wonder why neglect?

  Thank you in advance,
  Mario DiMare

  http://www.PCIDatabase.com/vendor_details.php?id=174

  The watch supplier Atheros (the VEN_168C bit) link which you already knew and the Netgear WPN311 above (the DEV_0013 bit) device. If the database is to be believed, I guess Blitzz were product badging Netgear or at least using the same chip.

  Netgear drivers can help...

  http://support.NETGEAR.com/product/WPN311

  Set a restore point first.

  Tricky

• How I fixed my USB ports not working not problem. Two ports left side previously does not... HP Dv7

  So I do not know what is not "where it will honestly, but put there just to try to help someone else who has struggled with this as long as I did it...» I ended up having my two USB ports on the left side (turned out to be my 3.0 ports) working again when they recognize nothing. I could use the USB 2 on right 2.0 ports, but the transfer rate was terrible.

  My answer on another question where someone had a similar problem... good luck!

  'Hi. '

  Not sure if this will help, but I had the same problem, the two ports on the left did not work on my Dv7. All this time I thought that the USB on the right were my 3.0 ports so I thought that would be nice, but it's been over a year that I initially had this problem and made a bunch of maintenance of the system meant that I would look through it again. In any case, I went to the Device Manager through the computer management tool. I know that you can go straight to the Device Manager, but just give you exactly how I did it. You can search just to start computer management.

  So I chose Device Manager in the menu on the left side and it looked like ordinary Device Manager. Went down to Universal Serial bus controllers... at this stage, I watched the action menu on the right and select more actions, opinions and you click Show hidden devices. After that I went through my USB controllers one by one as I had done many times before and checked them, tried the update of drivers, etc... Under the USB controllers Section, I noticed something like xHCI Host controller of compliance Test... I right click it and went into its details, I tried the driver updated and installed the new driver. 2 new USB controllers immediately arises: Renesas Electronics USB 3.0 Host Controller and root hub.

  Switched on a test drive from the right thumb to the left and the computer instantly recognized and installed the driver for the stick.

  And that was all... hope it helps even if this is later. "

  Hi @klark1kent,.

  Thank you for visiting the Forums Support HP's, welcome and thank you for the important information.

  Have a good week.

  Thank you.

• I have a Kyocera FS-820, but I could not able to install the USB Port in windows 7

  I need to install my old printer is the Kyocera FS-820 printer which works properly on Windows XP, but when I bought a new laptop which has Windows 7 Home printing USB no longer works. I tried to install the driver, but unfortunately I could not able to find the USB port.

  When I plug the usb PRINTER cable gives me an error of USB DEVICE NOT RECOGNIZE.

  Can someone help me what are the installation step by step in my printer thank you

  It seems that Kyocera has a driver for Windows 7 which you can download from their support site (download file - make sure the file name and where it is being recorded and then search for and double-click on the downloaded file to install it): http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?pid=13988&rid=22655

• How can I use the USB ports in Windows XP Mode?

  Windows XP mode

  I need to use the USB port, but are not available in Windows XP mode, how do they available?

  Thanks, I need an answer soon.

  Plug the USB device, click the USB menu

  Click Attach device.

  Please wait while this one is initialized.

• vmreconfig.pl adding a network adapter with port group

  I have searched the net looking for a way to add a network adapter on a virtual machine and specify the port group / name of command line or with vi perl of the network and have found no examples (or change a network map of existing virtual machine port group). Adding an adapter with vmreconfig.pl is easy, but there is no place to set the port group (containing a special VLAN id for the new virtual machine that is just cloned). I am creating a fully automated system and this characteristic seems to be missing or I missed just plan. Can anyone help?

  Here is the code which is close to what we use:

  #$netname is a string of the name of the network, the host view is the moref of the host that you deploy on

  My $net_vm_dev_conf_spec = create_net_device (network-online $networkname name, hostview-online $host_view).

  1. create virtual device configuration for NIC specifications

  2. ================================================

  void create_net_device {}

  my % args = @_;

  My $network_name = $args {netname};

  My $host_view = $args;

  {if ($network_name)}

  My $network_list = Vim::get_views (mo_ref_array-online $host_view-> network);

  {foreach (@$network_list)}

  If ($network_name eq $_-> name) {}

  my $network = $_;

  My = $nic_backing_info

  VirtualEthernetCardNetworkBackingInfo-> new (deviceName => $network_name,)

  network-online $network);

  My = $vd_connect_info

  VirtualDeviceConnectInfo-> new (allowGuestControl,-online 1

  connected-online 1,

  startConnected-online 1);

  My $nic = VirtualE1000-> new (support => $nic_backing_info,)

  key-online 9999,

  unitNumber => UNDEF,

  addressType-online "product."

  connectable-online $vd_connect_info).

  My = $nic_vm_dev_conf_spec

  VirtualDeviceConfigSpec-> new (device-online $nic,

  operation => VirtualDeviceConfigSpecOperation-> new ('add'));

  Return $nic_vm_dev_conf_spec;

  }

  }

  }

  }

  #then create a config specification

  my new VirtualMachineConfigSpec =-> () $config_spec

  deviceChange =>,

  );

  #Then apply this config spec spec clone or something.

  -Matt

  VCP, vExpert, Unix Geek

• Portege R100 - question about the installation of the USB port and Windows problems

  Hello

  I just bought a used Portege R100, but I have some problems. Of course the laptop isn't a CD or DVD, player so I tried an external DVD drive, but it did not work. What kind of device I have to install Windows (not an edition of recovery or anything like that, but a whole new windows on the formatted HARD drive)?

  I also have another problem: whenever I plug a USB device (I tried the DVD drive external and a USB keyboard) when I start the laptop, it seems to hang. At least, I am not able to type anything more; the keyboard of the laptop is dead (the point where the entrance would still be flashing in the BACK platform, but typing. sth on the keyboard isn't doing anything). It is not normal, is it?

  I also tried to get to the BIOS, but I tried various commands (F1 to F12, DEL etc.), but I couldn't access the BIOS. It would be great if someone could tell me the command for it.

  Thanks in advance for the help and sorry for the bad English, I'm not a native speaker :)

  The forum has a search function, but to help you look still these 2 wires:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921

  Here you can see that XP installation isn't very easy, but can be done successfully

  as long as you are working in an environment with appropriate back-drivers back, you can use any kind of external (USB or pcmcia) CD player you want

  the bios is accessible by pressing ESC and the Start button

• Operation of the USB ports on Windows 7 OS

  I got a SAMSUNG laptop SF411 job fifth generation i5 on 64-bit WINDOWS7. It went wrong in the sense of windows updates have not been configured. To access the support online were trying trying to Mr J Haydee. But the problem has not been resolved. On fitness by using the recovery by the manufacturer disc, everything has restored except two USB 3.0 port. All required them to leave the internet have been downloaded programs, but the ports are completely inadmissible.

  Can anyone provide any solution?

  You probably have not installed driver USB 3.  Visit the Samsung support and find the driver and install it.  Sometimes the names of the drivers on these sites can be very mysterious, then you may need to do some detective to discover who it is.

  CAUTION: Do not use one of these myriads of download of driver from the web sites.  Most is either infections or contain little value.

• IPhone on the pricing policy disabled USB ports in Windows

  Hello

  For safety, we stopped ports USB one our business using Group policies in a Windows environment. USB keys, USB, camera hard drives, phones, all are not allowed to install and use when connected to a computer. Capablities charge are still working on the iPhone, Android devices, but are not charged if the driver is or cannot be installed. Can someone tell me why this is and, perhaps more importantly, if there is a way to make iPhones load and always disable their data connectivity capabilities. Internet research and these forums have not made clear things for me on this subject.

  Kind regards

  Michiel

  I don't know if it will work, but there are some not Apple cables that are pricing only, not charging and synchronization. It can be difficult to find one who has certified the IFM and these types of cables are generally good cheap and of poor quality, so this may damage your phone if you're not careful which one you buy.

• Install a printer LPT1 HP LaserJet 4 L printer USB port in Windows 7

  Before this "incident", I was able to print from my HP LaserJet 4 L (LPT1 to USB) printer.  I still have the correct driver.

  I was forced to do a clean install of Windows 7 Ultimate and lost the ability to print from my LaserJet.  Windows only allows you to install it as a USB printer, but stop there in recognition.  I need to go beyond that point.

  It was working before and I know it can work again.  I just need help to get there.

  Hello

  I realize has the inconvenience that you are experiencing with the impression. I will certainly help you to question.

  Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  I suggest you check the steps mentioned below:

  Method 1:

  Run Troubleshooter printer and check if this can help:

  Open the printer Troubleshooter

  Method 2:

  Restart the Printer Spooler service and check if that helps.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform these steps.

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 2:

  See the link below and check if it helps:

  Diagnose and automatically fix problems printing and printer

  For more information, you can also check out the link below:

  Solve printer problems

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.