Network connections for the virtual machine

Similar Questions

• Disable the Internet connection for the virtual machine.

  Is it possible to disable the internet connection to the virtual machine from Windows XP with on the neutralization of him on my Mac?  I just want to connect to the internet if/when updates are required.  Any other time.

  I run Windows XP Pro SP1 on VMware Fusion v. 2.0.1

  You have a virtual NETWORK adapter, Fusion UI calls it just a network adapter (which, due to a bad design, choice flowing from the settings box, but it's another criticism for another time...) This screenshot shows a disconnected virtual NIC:

  

• No network connection between the virtual machines on different hosts ESXi

  I have several 5.0 ESXi hosts in a cluster managed by vCenter Server 5 and I have network problems:

  1. [Host A] running a virtual machine can ping any other computer virtual running on the [host A] great!
  2. A virtual machine running on host [B] can ping any other virtual machine running on [B] home - very well!
  3. [host A] (from the ESXi console) can ping any virtual machine running on [B] home - even better!
  4. [B] home (from the ESXi console) can ping any virtual machine running [host A] - beautiful set!
  5. A virtual machine running [host A] can not ping any virtual computer running on host [B] and vice versa - bad, very bad!

  So basically the problem is that the virtual machines can communicate on hosts. It is a major problem that I need to fix, for obvious reasons.

  Networking on all hosts is configured exactly the same way: a unique and standard vSwitch with a pair of gigabit network cards grouped, vmkernels configured for the vMotion, NFS and network management and a group of ports configured for the VIRTUAL local area network used by the VMs. (vMotion works fine on hosts, storage vMotion works very well too.) All virtual machines are servers Windows (2003 and 2008).

  Reason #3 and #4 above, my assumption is that #5 must be the result of an ESXi/vCenter configuration issue and not a problem with the switches of material upstream. Is this a reasonable assumption?

  Whatever it is, can anyone offer suggestions on how can I fix? It is quite annoying as I'm pretty sure that these hosts are configured in the same manner as those of our production cluster, which does not at all these problems!

  Thanks in advance for any help you guys can provide.

  To be honest, it looks like a problem with your physical network-

  How is the physical network configured - are NIC connects it to the same physical switches? Are the virtual machines on the same subnet? If this is not the case, they are able to ping the gateway sbnet? Can you piing host IP address from the virtual machines?

  I also moved it to a forum more approiate.

• regarding the connection of the virtual machine to the external network

  Hi all

  I'm new to vmware and I have two virtual machines with windows operating system 7. How to connect to the external network?
  can I assign a NATed IP to them?

  If the need to talk about virtual computer internally, you can add all the VM in the same VSS(vswitch 1) at the same port group Network2 VLAN40. for virtual machines on that VLAN can communicate among themselves without problem and configure all virtual machines with IPs in VLAN40. no need for an another vs.

  For internet access, first check with your network administrator, if the VLAN has a routing or this VLAN has access to the DNS server that provide internet or the proxy server for internet access. He will confirm. or you can also check if this virtual machine are able to ping your DNS server or proxy servers. If its power of ping so it has access to this network. Configure the virtual machines that you configure a physical computer for internet access.

  If the VLAN has access to the internet, even that you configure the physical server with connection DNS and proxy for internet access only the configuraiton even here too in the virtual machine.

• Students cannot "connect/disconnect the virtual machine's CD/DVD devices.

  I will start with this context (and apologies for the wall o ' text): I'm a newbie.  I took the course VMware local community college offers [VMware ESXI Server Enterprise (CIS197)], but I've not yet certified. And I don't have a real experience, except what I have taught myself so far.

  I recently accepted a position of learning associated with the College (think: glorified lab tech). I was tasked to work with stuff from VMware in the laboratory (among other things such as Cisco and Juniper equipment). There is no pass-down information like the previous left the position four months ago.

  We have a single host running ESXi 348481 4.1.0. "We have vCenter Server (5.5.0, 1312298), running on Windows Server (2008 R2, Enterprise Edition).  Access host and vCenter through two different IP, addresses using the vSphere client (either 5.5 or 4.1, using a single application - depends to know if I connect to the host or vCenter).

  At that time, the host is using local storage only (we have plans to change this, but it will take time).  The host is not a production on its own server, because it does not have a school systems.  He does, however, run a number of virtual machines in the lab, students use (Linux, Microsoft, Web design, etc.).  So, right now, I can't take it down.

  I was tasked to create a number of virtual machines that students can use to make the basic labs of Microsoft Windows 7.  So far, I have:
  -Created users, one per student, on the host.
  -Creating VMs, deploy one per student, I have a gold model vcenter.
  -Creation of roles to limit the access of students to just their VM attributed, which they access via client vSphere.
  -Created a Windows Server 2008 R2 domain controller that is also a DHCP server.
  -Created a virtual network, which is accessible only by the Windows 7 virtual machines and is not visible outside the vSphere environment (if I said this right - he does not see the Internet or school network).

  So far, it's all good.

  However, I need to be able to allow students the ability to edit the ISO file on which their VM points in order to complete some laboratories. I guess they would use the button "connect/disconnect the virtual machine's CD/DVD devices" on the taskbar (or console window). It does not work.
  I searched a lot and found that others have had the same problem.  However, all of the solutions I've tried so far have failed.  When they click 'Connect to ISO image on the data... store. "they get an error message means nothing to me,"an internal error has occurred in the vSphere Client. Details: Object Reference not set to an instance of an object. Contact VMware support if necessary.
  The role that I use for students has these settings:
  -Data store > Browse the data store
  -Virtual Machine > Configuration > change the settings of the device
  -Virtual Machine > Configuration > settings
  -A bouquet under the virtual machine > Configuration >
  -Configure CD media
  -Console interaction
  -Connection of the device
  -On
  -Power off
  -(and more, which I don't believe are important to the question)
  -State > create the snapshot
  -State > go back to the snapshot

  I tried "Virtual Machine > Configuration > add existing disk", "Virtual Machine > Configuration > add new disk" and "Virtual Machine > Configuration > add or remove an instrument" with no luck.

  Either by the way, the root account can do all these things, but no other account can - not even a game as an administrator account.

  I've seen mention I have apply the role in the data store.  It is perhaps part of the problem. I can't see the data store when I am connected to the host (wellll, I can, if I click on the host name, then on the Summary tab - but roles do not apply at this stage).  I see is 'Inventory' (which has virtual machines and Pools of resources), 'Rôles' and 'log files '.

  I can see the data store when logged in vCenter. Roles of students, however, are defined on the host computer. If I clone the role of users in vCenter and change this role cloned to have "permissions" that those who are on the host computer and then apply it to the data store, it still does not work.

  So, after all this (which I hope I've included all the necessary information), what can I do to allow the students to change ISO to which they are connected?

  Of course, if I left something, or if someone has a question, please ask.  I want to get this resolved as soon as I can.

  It turns out that I finally found the solution to the problem.

  What 'fixed', it is sufficient to vSphere Web Client to vCenter, which then allowed us to use Single Sign-On (SSO).  This, in turn, allowed us to define users and roles in vCenter (rather than having set them up directly on the host computer) which have then been applied to the VMS of students and also to the data store.

  Now, they can (de-) connect their ISOs at will.

  I find it interesting that vSphere Client (application) shows the users (and the things that they have access to), but it won't let you set of users.

• Dedicated network adapter to the virtual machine and the host computer not let can visit his profile

  OK, here's my question, I know how to give themselves a phyiscal nic to a vmware, but I wanted to take it one step further and do not leave the host send or receive data from this network card, only the virtual machine can use this network/NIC...

  Here's my reasoning, I have to network conections, one is for my internal/field network and the second is a direct connection to the internet (Comcast) I don't want to use to separate the machines have for internet connection, I want to be on the same machine phyiscal and have just the vmware machine talking to comcast... is it possible?  I am running VMware workstation 7, last update.

  Thank you

  Cdrshm

  I assume you are using a Windows host?

  If Yes...

  -first set up networking networking with vmnetcfg.exe

  -assign vmnet0 to the network card for the internal network

  -assign vmnet2 to the network card used for direct access to the internet

  -Right-click on the map network-icon in the systray and access the properties of the network adapter for vmnet2

  -Disable all other protocols and the Protocol of vmware_bridge for this network adapter

  result: a virtual machine that uses vmnet2 can directly access the internet and the host has no IP address for this network adapter - and therefore cannot use it.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• whenever I have to connect to the virtual machine asks me to enter login and password I can't save the credentials

  Hi, I used Windows Virtual PC XP mode for awhile and I just do a fresh install, and I'm having a problem that I seem not to be able to solve.

  After you enable the integration features, I got to the Windows Security login screen. I typed in the login and the password, but I accidentally made a mistake and could not connect. I clicked on cancel and was then in the XP login screen, where I entered then the right login and password and it me connected to the virtual machine XP without problem.

  Now, the problem I have is every time I connect to computer virtual it asks me the login and the password on the login screen of XP and I don't have the option to connect using the login Windows Security screen, so it do not give me an option to save my password and login information. So, to make things worse is that moment every time I have to resize the virtual pc it then asks me to log in again.

  Is it possible to return me to the Windows security login screen where can I put my login instead of the XP login screen when it is not an option?

  Hi Richard,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• Unable to connect to the virtual machine after adding new eSATA drive

  Hello.

  I'm trying to connect my new 2 TB drive in VMWare Workstation. It is connected via eSATA to the host computer, and it works. I added the drive to the desktop as a new "physical disk." But now I can not power the workstation the most.

  (1) when I start the VMWare Workstation it right ask admin (it didn't need before).

  (2) when I turn on the prompt does not charge even the bios. It shows a rear screen with the logo of VMWare for a while and then stop saying: "VMware Workstation cannot connect to the virtual machine. Make sure that you have the rights to run the program and access all directories that it uses and access rights to all directories for temporary files. »

  The host is running Windows 7 x 64. The workstation runs under the standard user account.

  Thank you.

  Hmmm - it's unexpected - works for me here - only difference: I tried with only 1 TB disks.

  You start Workstatiion as an administrator?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• How can I change the looks of Access Infrastructure Web location for the virtual machine files?

  How can I change the looks of Access Infrastructure Web location for the virtual machine files?

  My default is set to MACHINES C:\VIRTUAL.  But I want to change it to turn to an external drive connected with an eSata cable. Can I do this?

  Hello

  Add just like a new data store.

  Login to your web access, select your host (not the virtual machines) in the left menu.

  You should see a link on the right side with "Add data store", give it a name of store and add the directory.

  Now, you can add a virtual machine to this place.

  Good luck!

  --

  Wil

  _____________________________________________________

  Visit VMware developers at http://www.vi-toolkit.com wiki

• SRM 5.5 - vSphere replication - error: impossible to reverse the replication for the Virtual Machine. A snapshot operation cannot be performed

  Hi all, we have just run a test DR failover of a couple of virtual machines in our protected our failover site and all site swung perfectly, two virtual machines came online and all applications work well. However when we cam to r-eprotect machines virtual, we get some errors.

  One of the virtual machines seems to have lived the reprotect end process, it is still running, but has not moved to 89% for some time. The virtual machine has a couple of grand (a little less than 2 TB) VMDK. slow progress is just a consequence of the large VMDK?

  More worrisome is the virtual machine which don't reprotect at all. It generates an error whenever I click on the "Restore" button (error: impossible to reverse the replication for the Virtual Machine.) A snapshot operation can not be performed).

  
  Does anyone have any ideas as to the cause?

  Thanks in advance for any help.

  Andy

  Finally got to the bottom of this. The issue was that reprotect SRM work was trying to dispel any snapshots that were taken on the computer object virtual destination in VMWare, but could not clean snapshots.

  The reason why snapshots would not consolidate was because it was snapshots of temporary VEEAM who in fact any snapshot file listed in the VSAN data store. So when we looked through the browser data store, no snapshot file existed in the virtual computers folder. Trying a manual removal also failed.

  To fix this, we created a snapshot of the virtual machine in the original data center (note is the engine to the bottom of the virtual machine), this effect was to get rid of the 'fade' snapshot that was visible in the Snapshot Manager that VEEAM backup had left behind. Once this had disappeared, the reprotect back to DCA worked perfectly.

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• How to check the file for the virtual machine size Esxi shell

  Anyone who can tell me how to check the file for the virtual machine size Esxi Shell. I tried this command-h ls but does not work.

  Have you checked "ls-lh', it will provide information as the attached screenshot." "

• List of the files in the data store for the virtual machine

  Hello

  How to list the files of data store for the virtual machine? I can't find reference to the command.

  Thank you

  If you have installed vCLI and vSphere SDK for Perl, you have extra utilities on top of what is there with the vCLI, take a look at this list: http://www.vmware.com/support/developer/viperltoolkit/viperl40/doc/vsperl_util_index.html

  A script that can help with the list of files to store data for a given virtual machine is dsbrowse.pl

  Here is an example:

  [vi-admin@scofield ~]$ /usr/lib/vmware-vcli/apps/host/dsbrowse.pl --server himalaya.primp-industries.com --username root --name dlgCore-iSCSI.test
  
  Information about datastore : 'dlgCore-iSCSI.test'
  ---------------------------
  Summary
   Name             : dlgCore-iSCSI.test
   Location         : /vmfs/volumes/4a26f505-02dfd8a4-6867-003048d9586a
   File system      : VMFS
   Maximum Capacity : 15.75 GB
   Available space  : 11.654296875 GB
  
  Hosts associated with this datastore.
   himalaya.primp-industries.com
  
  Virtual machines on this datastore.
   None
  
  Templates on this datastore.
   None
  
  Datastore Folder Structure.
   Folder Path: '[http://dlgCore-iSCSI.test|http://dlgCore-iSCSI.test]'
   Files present
    testagain
    testlab-1
    testlab-2
    testlab-3
    testlab-4
    testlab-5
    testlab-6
    testlab-7
    testlab-8
    testlab-9
    testlab-10
    testlab-11
    testlab-12
    testlab-13
    testlab-14
    testlab-15
  
   Folder Path: '[http://dlgCore-iSCSI.test|http://dlgCore-iSCSI.test] testagain'
   Files present
    testagain.vmdk
    vmware.log
    testagain.nvram
    vmware-70.log
    vmware-65.log
    vmware-66.log
    vmware-68.log
    vmware-67.log
    vmware-69.log
    testagain-flat.vmdk
    testagain.vmx
    testagain.vmxf
    testagain.vmsd
  

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Not allowed to connect to the virtual machine after archive / installation of the Tiger

  I made an installation of archive / install OS 10.4 as part of the maintenance of the system. Today, VMware does not connect to the virtual machine and wants me to check my right to use the program and its directories.

  I recently bought VM Fusion and bought the license / registered. Something to do with installing the OS, maybe, but everything else works well.

  I don't have reinstall Fusion as part of the installation of archive / install.

  I would say that (this will not affect your VMS) because it is an easy thing to do and should decide on problems of permissions on the application itself.