Network error message
Hello All-I get error 1042013 & network 1042012 during the execution of a calc script thorugh MAXL. I would like to mention this error when the MAXL tries to run a script of aggregation which lasted about 30 minutes. I have seen the error
message from reference to Essbase and I updated Net delay 60000 & Net Retry Count to 3000 in the configuration file.
Earlier in the configuration file there is no present values for these two and while to implement maxl he can take the default value for Net delay & Net Retry Count.
I don't get this error whenever I run the maxl but sometimes.
Can someone let me know if I put the values as shown above for Net delay & Net Retry Count, which will hurt the performance of the system in any ways?
Are there other factors that I could find when I come up with this error?
How can decide us the optimum setting of the Net delay & Net Retry Count?
Please advise!
Thank you!
EMM is a sparse dimension
EMM is stored member.
Two of his children are dynamic Calc.
It is not a good idea to have children who are dynamic cal when the parent is being stored. This is probably your problem. If other members below these dynamic members calc are as dynamic calc, then I would say that it is almost certainly your problem.
Why the EMM_TotRe and EMM_TotSG dynamic calc?
Have them stored, as well as other members below them who are dynamic calc and your problem will most likely disappear. Your time calc could go up, but I can't that assume these members were calc dynamic in order to optimize the database, and it was not a good approach.
Otherwise do EMM dynamic Calc. If you have registered in EMM rates, you should change this. In general, it is not advisable to load data to senior level members. Create a member called EMM_Rates and move rates to that Member. Make a level 0 Member that rolls in EMM. You probably need to change certain forms of entry, but at the end of the day, need to realize that what you have now is not properly configured.
Tags: Business Intelligence
Similar Questions
-
I just made a requested update and now I get a message that says "Network error" try again. I can not connect to Amazon or something. Help!
Each thread in this forum which was published at in the last 2 days on this problem.
-
From the start I get network error message: DHCP error event ID 1003 began ID1002.
I have Compaq Presario SR1220NX, Windows XP, SP3. With the help of Verizon FIOS Wiresless and AOL Broadband Internet service provider. When starting up I get the message of network event ID 1003 errors and 2 times I got ID 1002. I was on the phone with Verizon, restarted Wiresless router and they did some other configurations. Looks after the router restarts and stuff and revive his party. But after a while he comes back again after cold reboot. Services DHCP is set to automatic. I don't know that he always comes to the top. Any help would be appreciated.
Hello
You can check these links:
http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=1003&EvtSrc=DHCP&lcid=1033I suggest you to contact your Internet service provider to verify the DHCP in your router settings.
-
Unable to access local network error message says I must enableiov6
Original title: network
Troubleshooting of network cannotaccess localnetwork said I need to enableiov6i need help
Hello
1. What is the exact error code or message?
2. have you made any recent hardware or software made to your calculation before the show?
3. using a wired or wireless?
Please follow the links below and check the issue:
Wi - Fi and in Windows network connection issues:
See the link on how to disable IP V6 below:How to disable specific components or IP version 6 in WindowsWarning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
I hope this helps. -
Original title: Unable to connect to the wireless network
Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7. "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address. Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3. It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.) Before that, wireless network worked well. (So unable to connect to the Internet for updates.) Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate. I don't remember what I did to try to solve this problem in the last days.
I should add that I have tried the solutions of the previous forum on this topic, and none worked.Hi Marilynnla,
Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.
Read this article and follow the steps. Lets see if it helps in any way.
How to troubleshoot wireless network connections in Windows XP Service Pack 2(Works for Windows XP SP3 as well)
-
Vista Business SP2 32 bit OS
Impossible to set up a network connection using a wizzard. Message: This wizzard cannot set up a network connection.
A broadband connection was founded prviously. There is no display of the network in 'connect to a network window.
a new folder by name hiddenpbk appeared on the desktop and through which I can connect to the previously established connection. but can not connect via "connect to a network window. Neither I am able to set up a new connection using the wizzard.
Please helpme.
Hello
Can you explain what connection to a network means in your case?
What exactly you want to connect?
If you have a valid broadband (Internet connection), you are already connected to a network.
If you want to check your wireless system follows this process.
If as a result of this process, you find something wrong, tell us what it is.
Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.
Check the Device Manager for the wireless card valid entry.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.
Make sure you firewall No. preventing / blocks wireless components to join the network.
Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.
When the work turns on the Wireless security.
Note * people sometimes make mistakes in writing and retype the password for security.
Another way is to copy in the menu of the router and then paste it when asked of the wireless card.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Journal of the network questions
I am not able to connect to my network to one of my computers. I enter the username and password (same as to log the computer - correct?), and yet I get the newspaper no failure message saying unknown user name or bad password. What can I do?go to the Properties window (right click computer and select properties) is the only registered owner your name on the first pc and your first and last on the second?
-
Unable to print on a wireless network, error message: required user Intervention
Original title: print over wireless network
I get an error that says user Intervention required. I'm on a wireless network and just upgraded to Windows 7 on my XP desktop. printing worked well previously. How to cross this error?
Hello
1 did you change on your computer before the show?
2. What is the number of brand and model of your printer?
This error occurs generally when the print job goes into a State on hold; the printer is to work offline or pause printing mode.
Follow the steps mentioned below:
Method 1: Restart the print job
a. Click Start, click Control Panel and then double-click Printers.
b. double-click the icon of the printer (not the Fax icon if present) of the product. A window opens with a list of tasks currently assigned to the printer printing.
d. click the first document in the list and then click printer. If there is a check mark next to suspend printing or use printer offline, click to remove the check mark.
e. If the page does not print, click on the Document and then click on restart.If the problem persists, follow the next method
Method 2: Clear the print queue and restart the computer
a. Click Start, click Control Panel and then double-click Printers.
b. double-click the icon of the product. The queue window opens.
c. If all documents to be printed are waiting, click on cancel or Purge print jobs/documents.
d. restart the computer.
For reference:
On Windows 7, a WSD print job cannot be completed if the Windows client does not have a subscription to the printer
http://support.Microsoft.com/kb/2308557
Network printer problems
http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-printer-problems
If you use tracking printer HP article below:
-
"" Windows Vista cannot connect to my network, error message "network not found path.
I have a laptop Windows Vista, up until yesterday, I was able to connect and browse my network, now the computer shows just 3 computers, always in the same network, which connects in the same router, nothing has changed in the network environment, I can just browse the network, when I try to log in as \\[ipaddress] it says "path not found network". , but if I run cmd and type 'ping [IP address]' computers meet the ping.
Can someone help me, thanks!
Hello
I suggest that you post the question on the link provided below for assistance.
http://social.technet.Microsoft.com/forums/en/itprovistanetworking/threads
-
BlackBerry Smartphones - not connected 2 WiFi network error message
I had my curve 8520 for almost a year now and today after I deleted some apps, its saying that my phone is not connected 2 a wireless network and well obviously won't let me use bb app store or my weather apps. Please tell me how 2 fix it
The first section is indeed for BB10...
But if you keep reading, you will find the section for users of pre-BB10 (i.e. you):
But remember... Here are the steps to perform in the order. Don't go to step 2 until you were correctly step 1.
-
[10054] network error - after calcscript
Hello all, I have this problem, run a maxL script.
It works fine on a couple of different servers, but one in particular, it stops. The script stops after that a long calculation is complete (40 min).
Useful info:
-essbase 7.1.3 Server
Any help is appreciated!
Here is a part of the newspaper:
[Mon Jan 25 15:14:47 2010] Info (1019018)
Engraving for the [Database] database parameters
[Mon Jan 25 15:14:47 2010] Error (1042013)
Error network [10054]: cannot receive dataHi, take a look at this post he is around the same problem you are having, there are a lot of answers on the question it should give you something to go.
Network error messageSee you soon
John
http://John-Goodwin.blogspot.com/ -
I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2
It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility. Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it. My VPN works much better without AirPort Express connected.
Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.
If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.
As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.
But it's your call.
-
I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. "Do you know what is happening here - what could be the problem? (I have the latest version of Firefox already installed. I previously got Firefox error messages indicating "Firefox update failed". However, I already have the latest version of Firefox installed when I got these error messages.)
I think that we must hope that the problem will be resolved at the present time. If you see the error message again post in this thread. Also, it would be unusual get this message while trying not to update, but if you get if you try to copy and paste the details of console error that they can be useful.
Use
- keyboard Ctrl + Shif + J
- or button-> Web Developer Firefox-> Console errors
This kind of message is apparently the only normally expected when you try to update to Firefox. It seems strange that you get the message using a 'Œuvres' document, but others have reported this message seemingly random incidents.
(So normally, you must clear the error console, and then try to update knowing the error messages have been the result of this attempt to update)If I had this problem my concern would be that some kind of malware may be involved, but the message can then indicate that all this malicious program is upset.
-
I am trying to print a photo book, but get the message "a network error occurred during the processing of your order. Please check your network connection and try again. I had no problem with the printing of a book about a month ago.
Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.
Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.
-
hp officejet pro 8500 a - Wireless Network Setup Error Message premium
I have my printer connected to my desktop via USB, and print very well. I want to connect the printer to the network wirelessly to other computers can ePrint. However, whenever I want to initaite the wireless configuration wizard, I get the following error message: wireless communication has been disabled. Contact your network administrator or the person who set up the printer.
@khalidalkalla, please check your private message Inbox.
Maybe you are looking for
-
Qosmio X 505-Q890 - new necessary power cable
Hello I ve just got my new Qosmio X 505 - Q890 of the United States but I m living in Cyprus and the power cable doesn't fit. Should what kind of cable I?
-
Microsort Teredo Tunneling Adapter this device cannot start (Code 10)
Help, please. Previous attempts have failed. Moved from feedback
-
Downgrading to XP and then upgrade to Windows 7
My Tower has a sticker that says OS; Win 7 downgrade to XP Pro. I also have a sticker that gives me a product code for Win 7 PR. These stickers will allow me to upgrade XP Pro to Windows 7 Pro? I don't have a disc. Operating system has been insta
-
For some reason any the fact when my laptop HP screen goes off (as I put it to the University after a short period for battery power saving)--> takes a few seconds every time I turn on the screen. If I try to cancel, it freezes, like I said and I cos
-
I hit the password prompt store by accident and cannot find a way to cancel it. Any information would be appreciated.