Network peer2peer Windows7 problem

Similar Questions

• Pavilion 15-ab063tx: 15-ab063tx Pavilion network controller driver problem

  Hello

  I just bought a new 15-ab063tx Pavilion and after format, I have a wireless network connection problem. For the network local network it works well but I can't find the wireless network adapter. On the device he received the error this network controller driver problem. Can someone help me.

  Realtek Wireless:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4158

  Bluetooth:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_147638_1&swEnvOid=4158

• Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

  Hi all

  I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

  Can anyone help me please with this.

  Thank you

  Zia

  What is the local firewall on your computer?

• network Windows 7 problem

  The problem is with a computer windows 7, which worked fine until the last update (windows Defender definition) February 3, 2014.  looks of stack network OK open cmd and ipconfig and ping the router correctly. Be able to see the configuration page of the router in IE11 and Firefox, however not able to see Web pages. Verified the remote desktop and can display the server's desktop. Outlook cannot see the mail server. Turn Windows defender, windows firewall and the antivirus firewall. have manual reset for ip and DNS tcpip however no change have used netsh reset in a cmd window tried to do a system restore but it fails. the problem must be with the software were used starting in minimal mode and safe mode with networking with the same result.
  Entered in the static ip address for a remote server and received a correct notification (you are not authorized to view this page) running options

  Hi Anil

  The computer of windows 7 is one of the 8 on a network with a windows 2008 Server. All computers bar you can see the internet.  The router status page indicates that it works correctly. I can RDP into the server from a remote location.  The tcpip and DNS for the computer with the problem have been working with the network card, no problem device is present in System Manager. I can't do a ping of the defective computer to all others on the network. In line at the seven layers of the OSI physical and software layers work properly, looks like it's fire to the walls of IE11 and Outlook.  Checking that all firewalls is turned off. System Restore starts and fails them.

  Have now resolved the issue. The last update to the computer was an update definitions for windows defender. I removed the update in safe mode with network and was able to do a system restore to the day before the problem. Windows defender is turned off and has been for many months, but this late update to the walls of the system software.
  Thank you

  concerning

• Inspiron Windows7 32 bit N5110 all drivers (video, Audio, network etc.) problem solved

  After much net research I found the solution.

  It is not understandable why DELL does not include drivers for Inspiron N5110 for Win 7 32 bit?

  Me and a friend of mine recently got the Laptop Inspiron N5110 i3, 3 GB, 500 GB. We have installed win 7 64 bit only its pilots were listed on the Web site.

  But 64-bit causes problems when running high technologies such as Matlab and Xilinx software (Yes, I'm an engineer). So I had to switch to 32-bit win7.

  But Win7 32-bit drivers are not available on the web. My friend has a solution for this. It found that almost all drivers for Vostro 3350 win7 32 bit and 3550 are compatible for Dell Inspiron N5110. I have download and install and they work fine on my laptop.

  You need the following drivers. The files are named as R161139, exe, no description. the description is added by me.

  F:\5110 driver\Drivers\R161139. EXE
  F:\5110 driver\Drivers\R291975_Wifi_x64.exe
  F:\5110 driver\Drivers\R291993_Renesas_USB3_x32_x64.exe
  F:\5110 driver\Drivers\R292194_Intel_Management_Engine_x32_x64.exe
  F:\5110 driver\Drivers\R292253_HM7_Chipset_x32.exe
  F:\5110 driver\Drivers\R292450_Ethernet_x32_x64.exe
  F:\5110 driver\Drivers\R292473_CardReader_x32_x64.exe
  F:\5110 driver\Drivers\R292488_Wifi_bluetooth_V_A00_x32_x64.exe
  F:\5110 driver\Drivers\R295142_Graphics_x64.exe
  F:\5110 driver\Drivers\R297811_Audio_V_A02_x32_x64.exe
  F:\5110 driver\Drivers\R303143_Graphics_x32.exe
  F:\5110 driver\Drivers\R305170_Touchpad_x32_x64.exe
  F:\5110 driver\Drivers\R309746_Winston_USB3_x32_x64.exe
  F:\5110 driver\Drivers\R312280_Wifi_Bluetooth_V_A02_x32_x64.exe
  F:\5110 driver\Drivers\R314287_Dell_Quickset_x32_x64.exe
  F:\5110 driver\Drivers\R315254_Audio_V_A03_x32_x64.exe

  Hope it solves the problem for everyone looking for dell inspiron dirvers of 32 bits.

  Peace for everyone.

  could you please send me link to download all the drivers for INSPIRON N5110 for Windows 7 32 bit

• FTP with Windows7 problem

  Need help, I have admin several websites and all of a sudden I can connect is no longer one of my host via one of my programs FTP servers. I use these programs to access the host for several years and in fact that I just downloaded pages a couple of weeks (July 29, 2015 last access). But now let's not today as I get the usual error message this hostname, the network connection is down, etc. This isn't the problem. I have 3 laptops and none of them work and they all run Windows7 so I'm making the assumption that a recent update caused the problem, because nothing has changed. Also, I tried to do a system restore on one of the laptops, but the restore points go back to 7-29. I tried several times to go to the furthest back, but every time he tells me sys-restore has failed.

  Found my problem, apparently it was an update on my modem router cable / which changed the security level.

• Error 1606.Could access the network location. Problem installing driver scanner.

  I tried to install the drivers for a more BearPaw 2448TA scanner in the edition of Windows 7 Home Premium (64-bit).

  Recently, a message appeared in the center of the Action to say that a new driver of Mustek systems was available, I downloaded and tried to install.

  A messagebox is displayed during the installation with the following message
  "Error 1606.Could not access network location------." and the installation will fail.

  Help would be greatly appreciated.

  Hi HenryGib121,

  Thank you for using the Microsoft Answers forums.
   
  I suggest you to download and install the driver from the link below.
  http://www.mustek.com/Mustek/support.php
   
  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  If the problem persists try the steps and check them off below.

  You can create a system restore before trying the steps below in order to be on the safer side.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Here are the steps to fix it.
  1. click on start, run, type regedit in the Open box, and then click OK.
  2. look for the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  3 remove the entries that show the path that is listed in the error message.

  If the steps above did not resolve your problem, then you can try to create a new user account and check.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://support.Microsoft.com/kb/811151 (this article is for xp, but can also be used for vista and windows 7)

  You can also contact the mustek support team for help.
  http://www.mustek.com.tw/support/
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Tecra M2 and wireless network - signal strength problem

  Need advice buying wireless kit.

  I have a DSL phone line connection and I am currently using a Speedtouch USB modem connected to my workstation down.

  I have a laptop Toshiba Tecra M2 with construction of wireless support. I want to be able to share the internet connection which comes in the workstation down. I guess that my options for the workstation are to use a DSL wireless modem to share the internet connection or to use a PCI card in my computer. I tried them both.

  I first tried to set up an infra mode network with the laptop using a LinksysWAG54G which was connected to the telephone line and a computer. But the problem with that I was t couldn't do accept the subnet mask that my ISP (Lixxus) provided 255.255.255.255 (PPoA). This modem has all the masks of SN in a dropdown list, but mine isn't in this list. I returned this modem.

  I tried then set up an adhoc network purchase buy a PCI Wireless card for my desktop, and internet connection sharing etc. on the workstation. However, while it worked, and I could see the desktop of my laptop, the problem has been the wireless range. The signal disappear when I wore the laptop in the back room on the first floor. It would have been a distance of 10 meters in a straight line between the laptop and desktop. There are walls two bricks and a floor between the two machines. It seemed hopeless, so I sent the PCI card.

  I'm not sure what to try next.

  Any suggestions that I could try next?

  Suggested hardware?

  Signal strength - could the problem be that the antenna in portable insufficient Tosh - it too small?

  Hello

  I have the same situation at home. The best solution for this is to use the wireless router. Here you have the possibility to connect several computers desktop or laptop. In this case the configuration of wireless connection is very easy and it works fine. I also use it at home and in front of my house with no problems.

• Satellite PRO P200 (PSPB7E): LAN PCI network resources - conflict problem

  Hey,.

  I have a Satellite PRO P200 and I have some problems with the local network. (not a wireless).

  When I plug in the network cable, the system want start at all. The blue power let towers and it is all tha comes.
  If I turn off the laptop, unplug the cable and turn it on, it starts, but the network card is more installed.
  I already downloaded the driver from Realtek for Vista 32 bits from the website, but no difference.

  In fact, the driver is not recognized as being a good driver for the device. I select the driver manually in a list (using have disk etc..) to get installed it. After the re-setup all the parameters of the network card in Vista or disappeared, always on dhcp.

  I already had a blue screen (vista dump), during the installation of the device.
  And a mistake:
  Conflict of resources - controller Netword PCI in the location 08
  Bus: 04, device: 00, function: 00
  Press to return to for Setup.

  I also tried to turn the peripheral as the third lan of start-up, but it automaticaly turns on again.

  I tried to update the bios to the latest version, she too successful (not), but it did not solve my problem.

  Any ideas?
  hardware failure?
  I guess that's not possible the device lan switch?

  Hello

  I read a lot of stories here, but yours is really amazing. I don't know what the problem is here, but try to enter the BIOS settings and set it to the default value. After doing this install OS using recovery media.

  Now that you must clean preinstalled OS and your laptop will have factory settings. Please retest the functionality of network card. If the problem persists, you need professional help.

• T430 - (eventually dislodged) network/ethernet card problem?

  I have an ethernet connection that suddenly cut yesterday; my laptop does not recognize that there is an ethernet cable connected to it. He did once before, but mysteriously dressed himself. No chance now. The network light does not appear when I plug the ethernet cable, but I checked (by plugging in another laptop) who works in the internet and the cable is fine. Which indicates that the problem lies with the network adapter.

  I suspect the network card (or whatever the thing you plug the ethernet cable) is filed incorrectly, such that it does not recognize that the cable is plugged in, even if it isn't a very informed opinion. Nothing shows up on a scan or network hardware diagnostics, and I can always get wifi; the map itself seems to work, but for the connection. Disabled/re-enabled network card, so I'm suspecting it's a physical connection problem. In addition, both times where my ethernet connection has stopped working, it was immediately after I came home from uni, with my laptop having had the opportunity to wiggle around in my bag. All this comes after my laptop received a slight bump and some minor visible body damage (although all the NIC has worked perfectly fine).

  Are there measures suggested to take to solve this problem, or ideas on what exactly is the problem?

  There is no card. Connectors and circuits are part of the motherboard. You have a guarantee, although if there is physical damage in this area, it will probably not be covered without cover against accidental damage?

• EE-Brightbox network and B110 problem

  I have used my Photosmart B110 with a Netgear router successfully, but have now changed ISP for EA. I went through Setup with their EE-Brightbox router https://broadband.ee.co.uk/bright_box_router

  The wireless network test report indicates that the printer is on the network. However, the definition on the printer reports an error 1 - applications cannot connect to the server.

  I cannot set up the printer to print from a mac now (10.9) or iPad Air.

  On Mac, I can not connect to the printer to be added through preference of the system-> printers-> Aiprint... "cannot communicate with the printer.

  iPad print says printer is offline

  Is there a setting on the router, I should change, or an update on the printer?

  Thanks for the offers of help. I've now spent to the router Netgear, and that solved all the problems with Airprint. I just got set up fake or maybe EA-Brightbox router does not support Hello....

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• Network Pro K8600 problems

  Hello

  We had a problem with the k8600. Theres no possible connection on the network. Indicates the configuration page:

  http://169.254.246.85

  IP 169.254.246.85

  ..

  Default gateway: 0.0.0.0

  Configuration Suorce: Auto IP

  It is of course a random IP address, but how can I change this without having the opportunity to reach the printer (on the browser or something else

  The LEDs for the network (green, not flashing yellow flashing when the printer starts up then off)

  The printer works with USB

  Could someone help us?

  Thanks a lot for your help!

  solved the problem

  Connect a laptop to the

  changed the laptop computer ip address for 169.254.246.1 / 255.255.0.0.
  then got a connection with the browser

  changed the IP for the network of the company

  hope this helps someone else

• Network printer installation problem

  In safe mode, delete the printer and spool driver files. To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders (where C: is the drive where you installed Windows XP):

  • C:\Windows\System32\Spool\Printers
  • C:\Windows\System32\Spool\Drivers\w32x86
  Back to top

  Then, edit the registry warning serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk. All first, remove Windows NT subkeys remove registry entries can be problematic for the Windows NT x 86 service subkeys. They may have been installed by the installation programs third-party printer and can interfere with the service of spooling print. Use the following steps to keep the drivers, print spools, and registry entries that came with Windows on your computer and remove all others who may ask questions.

  1. Start the registry editor. To do this, click Start, click run, type regedit in the Open box, and then clickOK.
  2. Locate and expand the following registry key:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x 86

     View the list of subkeys (subfolders). There should only be the following subkeys:

     • Drivers
     • Print processors
  3. If there are any subkeys other than the subkeys listed in step 2, follow these steps:
     1. On the file menu, click export.
     2. In the file name box, type the name you want to use for this key, the asWindowsNTx86regkey, and then click Save.

        Note You can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.

     3. Delete all the subkeys other than the subkeys listed in step 2. To do this, right-click each subkey is not on the list, and then clickRemove. Click Yes when you are prompted to confirm the deletion.

  Then, remove the registry entries to remove the printer drivers the potentially problematic printer driver subkeys, which may interfere with the printer you want to use. These may have been installed by the installation programs third-party printer. Use the following steps to keep the printer driver and registry entries provided with Windows on your computer and remove all others who may ask questions.

  1. Start the registry editor if it is not open. To do this, click Start, clickrun, type regedit in the Open box, and then clickOK.
  2. Search for, and then expand the following registry key:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers

     The registry entries for the printer drivers installed on the computer are stored in theVersion - x subkey or subkeys, where x is a number (typically 2 or 3).

  3. Export the Version - x subkey or subkeys. To do this, follow these steps:
     1. On the file menu, click export.
     2. In the file name box, type the name you want to use for this key, such asprint driver, and then click Save.
  4. Expand the Version - x subkey or subkeys and delete the printer driver entries. To do this, right-click each printer driver subkey, and then clickRemove. Click Yes when you are prompted to confirm the deletion.

  Thirdly, remove the registry entries for the default print monitors remove the potentially problematic print monitor subkeys, which may interfere with the printer you want to use. These may have been installed by the installation programs third-party printer. Follow these steps to keep the print monitors and comes with Windows registry entries and remove all others who may ask questions.

  1. Start the registry editor if it is not open. To do this, click Start, clickrun, type regedit in the Open box, and then clickOK.
  2. Search for, and then expand the following registry key:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors

     View the list of subkeys. It should only be the following subkeys for the default print monitors:

     • BJ language monitor
     • The local port
     • PJL language monitor
     • Standard TCP/IP port
     • USB Monitor
  3. If there are any subkeys other than the subkeys listed in step 1, do the following:
     1. On the file menu, click export.
     2. In the file name box, type the name you want to use for this key, the asMonitorsRegkey, and then click Save.

        Note You can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.

     3. Delete all the subkeys other than the subkeys listed in step 2. To do this, right-click each subkey is not on the list, and then clickRemove. Click Yes when you are prompted to confirm the deletion.
  4. Exit Registry Editor.
  5. If you have a printer connected to the computer, disconnect the printer from the computer and restart the computer.
  Back to top

  Now, verify that the print spooler service is running to verify that the print spooler service is running. To do this, follow these steps:

  1. Click Startand then right-click my computerand clickManage.
  2. Expand Services and Applicationsand then click Services.
  3. In the Details pane, right-click the print spooler service, and then click Start (if it is stopped).
  4. Output of computer management.

  If you cannot start the print spooler service, follow the steps in the following article in the Microsoft Knowledge Base to start the print spooler service:

  919750 (http://support.microsoft.com/kb/919750/) you experience problems printing, display the printer icons and adding printers, the print service spooler does not work correctly, and you receive error messages related to printing on a Windows XP-based computer
  Back to top

  Finally, add a printer and print a test page if you have a printer is connected, reconnect the printer cable to the computer, install the printer by adding it to the computer through the Add Printer Wizard and then try to print a test page. To install the printer of your choice, follow these steps:

  1. Click Startand then click Printers and faxes.
  2. Click Add a printer. The Add Printer Wizard starts.
  3. Follow the instructions in the Add Printer Wizard to install the printer you want.
  4. Print a test page to make sure that you can print.

  If you can't always print or if you still receive errors of spool printing, go to the section "This corrects the problem? After above steps, I can't configure my printer via the network and after complete installation, an errormsg shpwing ' operation could not complete "and ask for the installation program."

  The portable operating system is windows XP SP3.

  Any body can help me to solve the problem.

  Hi Scott,.

  • What exactly happens when you try to install the network printer?
  • You receive an error message?
  • What is the network printer connected via an Ethernet or wireless?

  However, you can access the link below and follow the steps in the article to install the network printer and check if it helps.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  You can also use the printer Troubleshooter in Windows XP and check if it helps. Access the link below and follow the steps to run the Printing Troubleshooter in Windows XP.

  http://support.Microsoft.com/kb/308028

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• T41 Network Controller driver problem

  Hello

  I have a T41 and my network controller is visible that a problem in the device (yellow icon) Manager number displays "no drivers installed (Code 28)" I tried to find the right driver but I don't know that one is.  Anyone have advice on the correct driver and how to assign to the network controller.  Internet works via Ethernet, but Wireless does not work because of this problem.

  Thanks in advance

  Concerning

  ~~~

  Technical support product: ThinkPad T41 2373 - 1 HG [change]

  Operating system: Windows XP [change]

  Original description: P M 1.4 GHz, 256 MB RAM, 30 GB 4200 RPM drive HARD, XGA(1024X768) 14.1 TFT LCD, 32 MB ATI Radeon 7500, DVD 24 x-8 x, Intel 802. 11B wireless (MPCI), Modem (CDC), set Chip (TCPA), 6-cell Li-ion, 1 Gb Ethernet (LOM), UltraNav

  Hi julieannbriscoe,

  Welcome to the forum!

  You need the following driver:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-59438

  Be sure to run the installation second after having extracted the files from C:\DRIVERS\WIN\WLLANINT\SETUP. EXE.

  It will be useful.