Network policy server: any available domain controller

Similar Questions

• AAA accounting in charge of the Windows 2008 network POLICY server log

  Hello world

  We have configured our Cisco devices to use Windows 2008 network POLICY server for RADIUS.  However, we cannot configure aaa represents priv 15 commands to use the same radius servers for recording of commands in privileged mode.  When you set up by using the following command:

  AAA commands 15 arrhythmic default accounting RADIUS_SERVERS group

  I noticed that there is only GANYMEDE + servers 'group' categories and optional.  After entering the server radius group, I realized that the command is not saved and by inspecting the logs I saw the following:

  The 'MF_RAD' server group is not a Ganymede server group. Please define "RADIUS_SERVERS" as a Ganymede server group.

  This means that the function of accounting 'orders' (and probably most others) can be activated only when you use a GANYMEDE Server +?

  Thanks in advance

  You're absolutely right. Accounting command only works with Ganymede. We cannot have the command for the radius Protocol accounting. RADIUS accounting only gives you start and stop sessions package.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Windows server 2008 r2 domain controller deletes printers on windows 2003 Server

  We have recently installed two new Windows Server 2008 R2 servers in our field.  one of the new servers is the new domain controller (successor of Windows Server 2003 SBS, which has been decommissioned).  There are two other Windows 2003 servers in the domain.  When we turn off all servers for maintenance and then power them back on, the print on the windows 2003 Server spooler crashes; printers are deleted and the server does not allow you to add printers.  is this be caused by some settings in windows server 2008 r2?  This happened twice, and the solution is to rub the print on the windows 2003 Server spooler and reinstall the printers from scratch.

  Hello MPF_mec29,

  Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Eddie B.

• We have DHCP role configured on the Windows Server 2008 added domain controller but we receive errors.

  We have DHCP role configured on adding Domain Controller(OS: Windows2008 R2). On the same, we get the error in the below event viewer.
  The name "domain name: 1 d" could not be registered on the interface with the IP . The computer with the IP did not allow the name to be claimed by this machine.

  Hello

  The question you have posted is related to the Windows 2008 Server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Windows Server 2003 P2V domain controller

  I tried to understand the best way to do it.  We have a backup domain controller that is programmed to be either P2V would or recreated as a virtual machine.  Whatever it is, it's going to happen in our cluster HA.  I wonder if we can make just a P2V using the converter bootable without problems or would it not be better to organize a new virtual machine, and then go through the process of promotion and demotion.  Has anyone ran into any ING questions P2V one domain controller?  I can't really find any advice on this with the exception of a Microsoft document.  I looked on the forum and the exchange of Experts, and the general consensus seems to be, just do not do.  It is best to start from scratch.  I said why?  What happens when you P2V one domain controller?  If this isn't a secondary domain controller, so what about the PDC?  Are there unwritten rules on that?  A white paper that can be nice to look at?  Any help that anyone can give would be great.  For us, the easy way is to P2V, but if this isn't a good idea, then I guess we have the opposite effect.

  Found this blog relevant today!

  http://blogs.technet.com/b/askds/archive/2010/06/10/how-to-VIRTUALIZE-Active-Directory-domain-controllers-part-1.aspx

  ... Do online physical to virtual (P2V) conversions. Every P2V conversions for computers in domain controller role should be offline...

• the best practice is implemented Server Exchange and the domain controller in the same server

  the best practice is implemented in exchange server and the domain controller in the same server or
  put on another server

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums

• Installing vCenter 5.5 on a domain controller for Win2k12

  Hello everyone,

  I hope someone can help me with what I'm trying to do in my lab at home at little cost (laptop running nested esxi). As suggested by the topics, I try to install SSO, Web Client, the inventory Service and vCenter Server on a Win2k12 that will be a domain controller. What I've done so far (in addition to pull my hair):

  1. install and activate Win2k12

  2. install vCenter using Simple installation

  3. change ports for LDAP / SSL to 3899 and 6369 accordingly (instead of 389 year 636)

  4 adding roles DC, DHCP and DNS

  5 try to promote the domain controller in a new forest = FAILURE because the required ports are already in use, in particular send me questions is 88 port used by the kdc vmware service. As soon as I kill / uninstall VMware SSO, I can promote the server to a domain controller, but then I can not connect to vCenter more.

  Any idea / help will be very appreciated!

  He works (somehow) finally got: health & Geekness: how to install vCenter Server on a Windows Server 2012 domain controller

  I would be grateful if someone can tell me what is the effect of not having vmkdcd.exe automatic launch at startup. Thanks in advance

• Windows Server 2003 virtual domain

  Hi people, I have a Virtual Server 2003 running on WMWare workstation. I run the DCPromo.exe command to make the server to a domain controller if I use AD with it. I'm basically wanting to use the virtual server so I can create a domain (mydomain.com) thereon for testing purposes. I have my 70-290 exam coming up and want me able to put in place a field (even though its probably not under review).

  The problem is that I can't get the Windows 7 workstation that is running the virtual machine to join the domain of servers. Same ping IP address of servers I do not get a replica of the workstation. However, I can get a response from pinging the server to the workstation.

  Any help would be appreciated.

  Thank you

  Isn't that to join the windows domain will cause you problems, but it is much easier to have a client as a test bench that is not hosting the rest of the test environment (IE if you configure GPOS evil on your customer and that the customer is a virtual machine, it won't affect anything else)

  http://support.Microsoft.com/kb/323380

• Additional domain controller configration

  Hi all

  My Question is that I use Windows 2008 R2 server as a domain controller, now I'm going to set up the additional RODC on Server 2003 widows. What should I do before configure ADC on Win 2003 server. I have a update my machine win-2003 Server service pack.

  Kind regards

  Sajjad Jamil M

  LHE_Pakistan

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Can't see that 12 of my Clients 400 + server domain controller 2008 'network '.

  I don't know when he was born, but I'm unable to browse the entire network on the domain controller.

  We have Server 2008 and our two main server, I am unable to connect to several machines on a network, or 'see' in the network.

  I can see the machines that I need to log off the server from another machine of the client, but not from our servers.

  Thanks in advance for any help,

  Laura

  Hi Ibray3,

  Your question is more complex that most seem to be on the answers. I suggest that you re-post on our TechNetforums where computer professionals can help you.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• ACS any Version with Windows Server 2008 R2 64-bit domain controller

  Hi all

  Is there any version of ACS is currently working with Windows Server 2008 R2 domain controllers?

  Our server controls has recently upgraded domain controllers to 2008r2 and off 2003 servers. This did not our ACS 4.1.4 really happy.

  I read now serveral messages about problems with the ACS and Server 2008r2 and hope to find a solution (not to mention that switching to LDAP, yukk).

  Thank you

  Pato

  ACS currently cannot be installed on a server running Windows 2008 R2.

  As an alternative, you can install ACS on a member server.  Authentication

  ACS uses the local machine net API authentication both compared to a 2008

  R2 domain will work.  The Remote Agent can also be installed on a 2008 R2

  Server if you use devices.

  If you install ACS on a member instead server here is how to configure services

  to authenticate properly with the domain:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/installation/guide/Windows/postin.html#wp1041304

  -Jesse

• I can't start a desktop connection remote with my file server, but I can't get to my domain controller. Other computers on the network can initiate together.

  Using server 2003 as DC and server 2003 as a FS. Problem computer running windows 7 upgraded to vista professional. I can open a desktop session with the domain controller remotely, but I can't launch with the fs. Other computers on the domain have no problem with a server opening. I have access to shared folders on the MSDS via LAN and can ping the fs. Also can not use MySQL on the fs with this computer. FS cannot launch the Office with the computer problem remotely but can with others.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• How to disable detect the proxy server domain controller settings 2003

  Hello everyone,
  Here's the scenario

  Server:
  2003 domain controller
  By default IE installed: IE 6

  Client:
  Windows XP
  Internet Explorer version 8.

  Problem.
  Once a connection to domain to his machine (client) and open IE user it takes about 2 to 6 minutes to load correctly. It detects message proxy settings in the background (which can be) the cause of the problem. I want to bypass detection pox affecting as well and for that, in group policy, I enabled these settings.

  the main objective is to reduce the delay for IE load the home page at end of client in the above configuration.

  What should I do?

  Thanks in advance.

  On the client machine, to appear:

  Control Panel-> Internet Options.

  Click on the 'Connections' tab at the top

  Click on the "Network settings" button near the bottom

  Uncheck "automatically detect connection settings.

  Change other settings that you need on this page, as it will fit is no longer automatically.

  "OK" your way out

  HTH,

  JW

• Mutual authentication failed. The server password is obsolete on the domain controller.

  Hello
  I have configured the application WebDev and it mapped as network location.
  But while accessing it, I got following error: "the location is not available. Mutual authentication failed. The server password is obsolete on the domain controller. »
  Can someone help me solve this problem?

  Hi chahima,

  The question you posted would be better suited to Windows 7 IT pro community.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads