Network wusb300n wireless adapter creates test.txt on my C drive

Similar Questions

• Networking Ethernet wireless adapter NIC - why it keep having be reset?

  I have to constantly reset my router, as it drops my wireless connection?  How can I permanently?  IAM using Google as my browser

  Hello

  1. what operating system is installed on your computer?

  2 did you change on your computer?

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• Qualcomm Atheros AR9485 HP 14-b173cl wireless adapter does not

  I have a Pavilion Touchsmart model 14-b173cl upgraded to Windows 8.1.  Everything works except for the wireless adapter.  When I run the Diagnostics on the adapter windows returns an error indicating that there may be a problem with the driver.  I have installed and reinstalled the latest version of the driver several times without success. The wireless adapter worked fine until I updated the driver version 10.0.0.263 by following the instructions in the HP support assistant.

  Is there something wrong with the driver?

  How can I go back to the old driver?  He was working with window 8.1 before I loaded updated driver.

  Hello hilldouga1,

  I'm glad you found a resolution to your problem. If my last post did not solve your problem I would have recommended a factory reset. To restore your files I set out some steps for to follow you:

  Step 1. Scan from the right edge of the screen

  Step 2. Tap search (or if you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, and then click Search)

  Step 3. Enter restore your files in the search box

  Step 4. Press or click on restore your files with the file history
  Step 5. Enter the name of the file you're looking for in the search box or use the left and right arrows to navigate through the different versions of your files and folders

  Step 6. Select what you want to restore to its original location

  Step 7. Press or click the button restore

  This should restore your backed up files files. Thanks again for the display on the HP Forums. Have a great day!

• Cannot install Wireless Adapter (card NETWORK or USB key) to the Pavilion p6340a Win 7 Home Prem

  I removed a work card TP-Link to a Pavilion a1300a XP Home PC network to put in my Pavilion p6340a Win 7 (64-bit) Home Prem PC.

  Download and install the current drivers of TP-Link.
  Installed everything well and the adapter can be seen in sub "Change adapter settings" in network and sharing Center and shows as working properly in Device Manager, but it is not recognized as a network within the network and sharing Center.

  Under "Manage wireless networks'" nothing appears, if I then click on Add"then manually create network profile" "I then get an informative message '" an unexpected error occurred'. "

  Suspect a problem with the NETWORK card, I uninstalled it and its drivers and tried to install a USB wireless adapter with the same exact result and the error message. It seems that there must be an OS problem or something stopping the wireless to work. USB adapter both NIC work properly when installed on the former Pavilion a1300a XP Home PC. NETWORK card and USB adapter are the current drivers for Win7.

  All the ideas it driving me crazy. A simple 5 minutes on any other PC task turned into many.many hours without solution.

  After many hours of uninstall re install & try everything under the Sun in many forums, I finally found a solution. Despite trying with firewall disabled at different times was the final fix

  1. Uninstall NETWORK card and USB drivers and devices.
  2. Then uninstall the AntiVirus (in this case AVG Internet Security)
  3. Reinstall the NETWORK card and drivers
  4. Reinstall AntiVirus

  Tried the USB adapter as well so that the antivirus has been uninstalled and installed no. with problems.

  Everything works very well.

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• Belkins wireless adapter recognizes not all wifi networks

  I have a Belkins wireless adapter for my pc and try to connect to a wireless network. My adapter recognizes not all wifi networks and I know that there is on the functioning of the House. How can I fix it?

  Laptop?  If you know that there is a wireless network in your home because the other computers are connected to him, the most likely cause is that the wireless adapter is disabled (a physical switch or a combination of keys Fn + Fkey).

  For additional help, please indicate the make and model of your computer (and your wireless adapter, if it is not integrated), as well as the version of Windows you have, including the service pack.

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error problem USB wireless adapter "Wireless LAN adapt Wireless Network Connection 4:

  Hello

  I can't access the internet via a USB on my desktop PC wireless adapter. In fact, I received the following message:
  Wireless Network Connection 4 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Double Belkin N + Wireless USB adapt
  Physical address.... : E8-5B-5B-49-DD-CD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Please help me solve the problem.

  tanks

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you some questions, in order to better understand the issue.

  1. What is the exact model of the Belkin USB adapter?

  2. What is the brand and model of your computer?

  3. When was the last time it was working fine?

  4. Remember to proceed with software or hardware changes recently?

  This problem may occur if there is a conflict with a third-party software or due to an outdated driver, to diagnose this issue further and solve the problem, try the following methods.

  Method 1: Run the network troubleshooter

  I suggest you to run the network troubleshooter utility. It will automatically detect and solve the common problems that can cause problems with the network. To run this utility, you can follow the article below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Network Wi - Fi problems and

  Follow the Microsoft article on wireless and wired network problems. Click on the link below:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information was useful. Do not respond with answers, because it will help us to find and provide you with a better resolution.

  Thank you

• NETGEAR wireless adapter connects to a network other than mine.

  I started using a NETGEAR wireless adapter and it worked very well, always connect to my NETGEAR network. Then a few days later he began connecting to the default profile for the Native WIFI instead of NETGEAR. This part of the Windows 7 operating system, or someone is hack my wireless connection? How can I get rid of him? I reconnect to my network, but it reconnects to the Native WIFI default profile. Any help or info is greatly appreciated.

  original title: Native WIFI by default profile

  Radron,

  "Native WIFI" usually refers to a Windows SDK API and it is more likely that it is a programming error that someone hack into your system.

  I begin by visiting the site Web of Netgear, enter the model number of your wireless adapter and install the latest drivers for Windows 7:
  http://KB.NETGEAR.com/app/

  I'm fairly certain that updating the drivers will solve this problem. If not, switch to update the firmware on your router.

  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

  When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

  When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

  We reinstalled OS

  We rested the router

  We are able to connect to Wi - Fi in other laptops, notebook and mobile

  We have updated all the drivers of network also.

  Please help me solve the problem.

  Hi Niranjan,

  Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

  Thank you

• Windows 7 - wireless adapter or network is not visible

  Hello
  Recently I've updated from windows xp to Windows 7. When you use windows xp, I have access to my router wirelessly from my laptop. But in windows 7, the wireless network and the adapter itself is not visible (I tried in the taskbar, Panel-> Network and sharing Center). My laptop Dell Inspiron 1520 and wireless (earlier) is Intel 4965AGN. I tried to install a few drivers, but no permits. I don't know what the problem is? There is a problem with the driver / card wifi / Windows 7. Kindly help.
  Thank you
  Prabhu.M...

  Hi Prabhu,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you are having problems with the wireless network not available.

  Perform the steps suggested by Kevin Hau from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-wireless-connection-problem-no-wireless/43f61a9c-069b-49AB-9F5B-f52ec2b1ef7e

  Meet us if you experience problems with the wireless network connection or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• How can I test my 441090-001 Wireless Adapter? (QDS-BRCM1020)

  I have a laptop Presario F730US and my OS is Vista 32 bit. It is inconvenient to use USB wireless adapter when internal laptop Presario a WiFi adapter. I bought the USB adapter TP link wireless for Internet access.

  Is it possible that the mini-PCI card does not work?

  You are the very welcome, John.

  If she is not there, then it might actually be one of these possibilities...

  1. maybe you can install the HP Wireless Assistant and see if it shows your card in the program, and he just needs to be turned on with the software button.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55203-1&CC=US&DLC=en&LC=en&os=2093&Product=3686683&sw_lang=

  2. the card is completely faulty and is not seeing the same as installed.

  3. your PC has the same features (nvidia graphics and chipset) as the dv6000/dv9000 notebooks.  He had problems with motherboard dv6000/dv9000 series with this material. Among several things that could go wrong has been done on the motherboard mini-PCIe slot.

  You can search eBay by part number, and you should be able to pick up a replacement used but tested and functional real cheap.

  You can get a map with this specific part number or it will not work.

  Here is a link to several listed on eBay - as low as $4,00

  http://www.eBay.com/Sch/i.html?_sacat=0&_nkw=441090-001&RT=NC&LH_BIN=1

  If the replacement of the card works, then you have solved the problem at a great price. If it isn't then you know the motherboard is bad and not worth fixing and you either continue as you are now, with an external WLAN adapter, or spring for a different laptop.

  Paul

• HP pavilion 15-p107ne: wireless adapter

  Hello

  I have hp pavilion 15-p107ne and im having a problem with wifi adpter

  I have this model ( 1x11b/g/n Wireless LAN PCI Express Half Mini Card Adapter ) and its bad to find networks and connection.

  1. is the problem of the adapter

  2. can I replace it with ( Intel Dual Band Wireless AC WiFi + Bluetooth M2 )

  Thanks in advance

  Hi @wajd97 ,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with WiFi and you want to change the Module. I'll be happy to help you.

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  By page 24 of Maintenance and Service of Guide, you can install part number 710662-005 Intel Dual Band Wireless-AC 3160 802.11 ac 1 x 1 WiFi + BT combo adapter 4.0.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.