Networking, access to a folder

Similar Questions

• access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network

  access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network.  I enabled netbios over tcp/ip on computers

  Hello

  Try the steps listed in the link and check if this may help: "Access denied" error message when you try to open a file: http://support.microsoft.com/kb/810881

• I get a "Network error" Evertime I try to access a shared folder on another PC in my network.

  I get a "Network error" Evertime I try to access a shared folder on another PC in my network.  I get error code 0 x 80070005 access denied.  When I click on diagnose, I get a message that says 'c' is available, but the user account you're connected with was access dinied.  Also, I can't use Media player media sharing Windows.  I wonder if they are related

  Read this info and see if it helps:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot access any shared folder on the network of windows 7 Professional

  Hello

  I have a very strange problem.

  I have a home network with 4 computers.
  I can share files from any computer to the other.

  Recently, I bought a new laptop Lenovo E530 in with Windows 7 Professional installed on it.

  The problem is that I can't access any shared folder on my home network by '\\com-name '.

  I cannot yet access the folders on the computer that is shared from the inside, by specifying there name with the prefix "\".

  However, I can ping or even make remote desktop on other computers on my network.

  I can also access shared folders on my Windows 7 Professional from other computers.

  Looks like there is something wrong with the configuration of my OS from Windows 7 Professional blocking access to any shared folder on my network.

  I get the following error message:

  Windows cannot access \\comp-name

  Check the spelling of the name. Otherwise, it could...

  Error code: 0 x 80070035

  The network path was not found.

  I tried to use the button to diagnose, but without success.

  Help, please

  Dudi.

  Hello

  I suggest you try all the steps from the following link:

  Sharing of files and printers
  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also: File and printer sharing: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Cannot access a shared folder on the network of the virtual machine

  I don't know if this has been posted before, but I'll provide my contact information and appreciate the help.

  I have Windows 7 (32 bit) on the desktop connected to Windows Vista Home Premium (64) on laptop via the cable network. On laptop, I am running XP Pro SP3 on a virtual machine. While I can access a shared folder on the desktop via the laptop, in the virtual when I go to the computers in the workgroup, and even if I see the same files and printers shared on the laptop, when I click on one of them, I get a message that
  Desktop\Documents is not accessible. In the virtual, I have connected network bridged with replication verified physical network connection status. On the desktop and portable (host), I can access folders in the virtual (name-letters and numbers). The shared folder on the desktop is shared to everyone. What Miss me?

  Thank you

  Hello

  Check out the options to simple file sharing in windows 7

  http://www.home-network-help.com/simple-file-sharing.html

  response still not accessible

  Prakash

• Cannot access the Media folder via App IOS Readycloud

  I have a RN204 4.6.2 running in an OSX system which will not allow access to the Media folder via the IOS app on iPhone or iPad. I can access the media folder via the ReadyCloud portal or the finder on MAC without problem, but the IOS App shows "Access Denied" and requests user & password, which, when entered, does not. I can access all other folders via the application, just not the media folder. Permissions are set the same as the other issues so I'm not sure what the question is that if she's Readycloud app for IOS. I guess the user & password requested is for NAS, although I tried the credientals of Readycloud just for fun but no help. As a note, I don't get "Connection failed" but "Access Denied", so the network access is OK but access to the file is doesn't understand why all other folders are accessible but not the media folder. And that's on both VPN connections & local. Any ideas?

  OK, get it fixed. I have changed the name of the folder, allowed full access, then he changed the name of moose. Now I can access the folder via the ios app. I'll have to rescan the actions in my media streamer, but to the East, I now access app.

• Can access the shared folder by using the name of the server, but is unable to use the intellectual property

  

  Hi, I need help with a very strange problem.

  I have a Server 2003 domain controller to PC and all the domain user can access any shared folder of the server using IP address or FULL domain name.

  So I joined a R2 of 2012 new server to the domain as a workstation normal and not as a new domain on the network controller, and the problem is that one cannot access a shared folder on the new server by using the IP, but can be accessed using the name of the computer.

  My Admin user can access the folder using the IP address or the name comp. on any work, but the user of my AD position may not use intellectual property.

  I can using Ping IP or name of the computer for every user of AD.

  Please check the attached images.

  When I try to access it using IP, it gives me the following error:

  \\192.168.0.2 is not accessible. You might not have permission to use this network resourse. Contact the administrator of this server to fing out if you have access permissions.

  Currently, there are no available connection server to process the logon request.

  Hello

  You may need to ask the question on the TechNet Forums:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• How to set up the Windows network access program?

  original title: how to set up the N A P

  How to access my windows network access program

  Hi bryan stacy,.
   
  - What version of the operating system are you using?
  -Are you talking about in the center of network share or the network connection folder?
   
  If you are referring to the network connection folder, see the following link for more information:
  Work with the network connections folder

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi

• Cannot access my public folder when my firewall is on

  I can't access my public folder when my firewall is turned on. But can access it when my firewall is disabled. I already activated the public folder sharing and file sharing.

  Also, I don't see computers connected to my computer when their firewall is enabled and can see when their firewall is disabled. Why is this?

  You must configure your firewall properly instead of turning market.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  If you would like more information, please provide these details:

  1 levels systems operation/versions/Service Pack of all machines.
  2. name of antivirus/security software used.
  MS - MVP - Elephant Boy computers - don't panic!

• Error: "you don't have permission to access this folder. ' Click on continue having access to this folder continuously ".

  Original title: cannot access files on a folder on the drive hard usb after you have turned off sharing on a network.

  About a week and a half, I have set up my external hard drive usb to share on my network domestic as well as my brother could access some files on his laptop computer.  I've been playing with the security of some of the files on the hard drive and made sure that he could not access some of them.  I don't remember exactly what I did unfortunately.  After I had changed the security access, I was still able to access all files and my brother could not access it.  He got the files on the hard drive and I turned off my computer.  A few days later, I tried to access the files that I had limited and I was stuck.  When I went back in the drive to recover some files, I received an error "you don't have permission to access this folder.  Click on continue to have access to this folder permanently. "When I click on continue that another dialogue box comes up saying"you refused permission to access this folder.  To access this file you will need to use the Security tab. "I click on the link to Security tab and another dialog box appears asking"to continue, you must be an administrative user with permission to view this object's security properties.  Do you want to continue? "I'm obviously the administrator because I have this computer and I'm the only account on it.  From this point, I don't know what I do or what I'm supposed to do to recover my files.  I played a bit with a couple of things and I was able to get into certain folders, but its an extremely long process that I don't have the time for.  A side effect of which in fact so I can see the files, is that for any movie file, I try to access it, I get an error.  When I try to open it with Windows Media Player, I get the error "Windows Media Player cannot access the file.  The file may be in use (which is not the case), you won't have access to the computer where the file is stored (which is not supposed to because the computer on which it is stored my personal computer), or your proxy settings are may not be not correct (what?). "If I try to use another program like VLC media player, I get a similar problem where an error comes up saying that it was impossible to access the file.  I can see the file and see the properties but I am unable to actually see the film.  I can't move the file anywhere because I don't have administrative rights.  I'm under Windows 7 Ultimate, and if someone could help me please, that would be greatly appreciated.

  Hi Ridley,

  I see that this problem is old enough but you (or others) may have problems with it. Here's what I did:
  -Got to your hard drive and right click on the folder that is causing all the trouble.
  -Click on properties.
  -Click on the Security tab
  -Then click on advanced
  -You will see a window with a few user names. Now click on owner in the tabs above.
  -Click on edit, then select the user name you want to open the folder and don't forget to tick the box that says "Replace the owner of subcontainers and objects", then click on apply.
  A pop will come which says something like "You have replaced the property for the selected records" or something in this way. It worked for me and I hope this post is helpful for some people.
  Nina

• Cannot access a shared folder on the computer Windows 7 on a Windows Vista-based computer

  I'm having a problem.

  I have a small network in my house consists of three computers.  One is running XP, it has Vista Home Premium, and it has Windows 7 Home Premium.  I usually use wireless networks, but I have the same problem if I use wired connections through my router.

  All three computers can see each other when I display the network on each.  I can ping each computer from other computers.  The problem is that when I try to access a shared folder on the Windows 7 computer from the Vista computer, I get an error window popping up that says:

  \\computer-name is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The network location cannot be reached.  For more information about network troubleshooting, see Windows Help.

  I can get in the same shared folder on the XP computer.  I also have to shared folders on the XP computer Vista computer.

  I can also get to the shared folders on the XP and Vista computers on the Windows 7 computer.

  The only problem is learning to the shared folder on the Windows 7 computer Vista computer.

  The folder on the Windows 7 computer is configured to be shared by everyone.  Password sharing is disabled on all three computers.

  Any help would be appreciated.  If there is more information, I can give you, let me know.

  Thanks in advance,

  Bill

  Hi all

  Try this one:

  DISABLE password protected sharing"in Windows 7 network and sharing Center, advanced settings.

• iCal keeps crashing, cannot access the calendars folder in library

  Hi, I know that this question/very similar who have been posted, but I have a problem with iCal on my Macbook Air. I am running OS X El Capitan v 10.11.5. iCal does not work on my macbook; currently when I open it, only about 3 weeks events value are displayed (that are shifted back exactly 4 weeks now) and no other event in the past or the future appear.

  I see all my events both on my calendars iCloud on my iPhone and using iCloud online.

  I tried to access my calendar folder in the library, but he can find. When you try to delete my iCloud account to put new, nothing happens. I hit the button Delete and then tap on delete of Mac, but the iCloud account remains.

  I'm not sure if that was the issue, but I subscribe to a calendar and had some problems, so I created a new Calendar iCal subscription-related. I tried to delete the original, but whenever I do, I ran into iCal crashing. I've seen a lot of responses from forum saying that I had to go in my

  Libraries-> folder calendars but I don't see a folder calendars here.

  Any advice on how to remove the calendar and/or iCal works correctly again would be appreciated; Thanks in advance for your time!

  Hi Boris: I'm the kind of low-tech and does not even have a smartphone, but I also use El Capitan on my iMac 27 "and, like Yosemite, the library files and caches should be there.  To access it, hold down the Option key while you are scrolling to the bottom of the column to go to the top left corner.  You should see the library.  He has deliberately designed to use an extra step so that you won't accidentally inside.  You should see calendars.  I often erase 3 caches if there are questions, and they build back up again.  I also try to delete all external files, if I don't have a lot of space on my iMac.  Really, I do not use a calendar that many but a lot.  Hope this helps, but the library is hidden I guess to make sure that you don't go too much in.

• How can I close a folder of bookmarks or prevent anyone to find or access a certain folder of bookmarks on my computer without deleting bookmarks?

  I have a set of pages to a bookmark that I want to keep completely private, which means that no one should be able to find them inadvertently. I disabled everything that would make these pages pop up if someone starts typing in the address bar, and history of tracking is disabled. The ultimate solution would be to have these bookmarks saved in a separate place from the other favorites, a place where only I would never think to pick them up. And no, these bookmarks are in no way illegal, criminal or something similar (where everyone thought it). I just want to protect my private life, and more family and friends began to use my computer.

  Sorry, Mozilla has nothing like this for Firefox bookmarks, and I've never seen an extension that adds a feature like this to Firefox.

  Firefox has the ability to have several user profiles, within each logon user account. And each LUA automatically has its ' own unique profile.
  https://support.Mozilla.org/en-us/KB/profiles-where-Firefox-stores-user-data

  More - Windows has user accounts to logon to privacy such as protection. Each user account has a separate user data storage space.

  Personally, I'd worry more "other" access my passwords using my web browser, rather than restrict access to a folder of bookmarks.

• Toshiba NB520 11V - how to install a 3G network access module

  Hello

  I recently bought a NB520 11V and I was interested if it's possible and how to install a module 3G network access. And if it is possible, what are the specifications of the installation of a 3G network access module I have to buy.

  Kind regards
  Luis

  Hello

  As I know that some of the model supports NB500 is the 3G module but the NB520 does not support 3G.

  The 3 G CARD-F3307R2 (900TEG), which is equipped in the NB500 is the number of piece K000124470 (google for it)
  But to be honest I'm not very well if this module is compatible with the Mr. NB520 I guess not