networking and sharing?

Similar Questions

• Cannot turn off or disable password protected sharing the network and sharing Center

  I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

  I tried to disable Avira Antivir.

  I enabled the guest account and set its password to a string explicitly empty with net user guest «»

  Nothing helps.

  svampi,
  This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

  http://support.Microsoft.com/kb/947232

  Let us know if this can help, or if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network and sharing Center shows not connected, but the computer is connected to the wireless network

  When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

  Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

  Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

  Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

  It will be useful.

• Network and sharing Center (no answer)

  I have been using Vista Home Premium on a laptop Toshiba Satellite. I remember not exactly since when, but lately when I opened the icon ' currently logged in ': l to the taskbar and click on it and open CONNECTIONS current or CONNECT or DISCONNECT or NETWORK AND SHARING CENTER, it freezes: changement. t gave me a lot of problems... Please help... I tried Googling through and used commands like:

  1. net localgroup "Administrators'"NT Authority\Local Service"/ Add

  2. to turn off the automatic setting:
  Run as administrator command prompt.
  Type: "netsh interface tcp set global autotuninglevel = disabled" (without the quotes) and press ENTER.

  You may also need to run this command:
  netsh interface tcp set global rss = off

  To activate the auto adjustment:
  Type: "netsh interface tcp set global autotuninglevel = normal" (without the quotes) and press ENTER.

  To view the current TCP settings:
  Type: press and "netsh interface tcp show global" (without the quotes) to enter.

  I don't even know what they asked me to do, if it is correct or not, but I did and still no solution...: s: s: s

  Any yelp would be appreciated!

  Beppe!

  Nothing is perfect!... .but it should work!

  B3PPE,

  See that article following (http://support.microsoft.com/kb/929833) if it can help you to manually replace the files that SFC could not fix, it also gives you measurements on log file filtering so that only unsuccessful repairs of SFC are listed. Please note that the best source for replacement files would be a sound installation of vista with the functions you want to work.

  I will add to check your hard disk for errors, as corruption SFC could be linked to it. For details, see check your drive for errors .

  Our final recommended option for the problem that you encounter will be a Vista repair install:

  <><><><><><><><><><><><><><>

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or a level facility.

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  <><><><><><><><><><><><>

  It is always advisable to backup any and all important data before continuing with the major changes to your system. Please see: methods for backing up your files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><><><>

  Only a clean installation may shrink toward the low enough differences to isolate what causes this scenario. There are already has with your file system corruptions, we can't go until this is completely isolated. Please let us know if a reinstallation of your operating system is an option for you at this point.

  <><><><><><><><><><><><>

  Report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• restore service dependency for the network and sharing Center

  How to restore the dependency service or group who couldn't start for network and sharing Center?

  Hi patto1708,

  If it was something that was already previously and failed after certain activities on the computer for which you are not aware of, then the best possible thing to do is run a system restore. This will ensure that your computer is back to operational status.

  For more information about the system restore, you can see the link: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  Or you may need to check for the dependency of the network and sharing center services and start them manually when they are stopped manually.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Manage-services-in-Windows-Vista-from-Windows-Vista-Inside-Out to learn more about how to manage services in Windows Vista

  Kind regards

  SAP U G - Microsoft Support

• Network and sharing Center could not load the

  Questions:
  -Network and Sharing Center: Page failed to load
  -Unable to connect to internet, but says that it is connected to a network (have three PCs in net)
  -Guest of the continuous window - "problems and reports no longer."
  -By opening system in Control Panel, said the "Installer could not load display.

  It's the question driving me crazy... Anyone had this problem before?

  Hi kyungturner,

  Please use the forum for Support of Vista,

  You have anything installed recently? It sounds like the system could have a corruption.  Save all your data prior to perform a clean boot to further diagnose the problem:

  http://support.Microsoft.com/kb/929135

  If the clean boot does not work, try a SFC scan to repair system files:

  http://support.Microsoft.com/kb/936212/

  Let us know if this helps solve the problem, Kevin
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• Centre network and sharing that network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything

  just noticed on my network and sharing center that the network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything thank you.

  If you do not share with another PC or XBOX Media Center, then your file and media sharing must be turned off.

• SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

  Original title: Windows Explorer has stopped working when I click on network and sharing and also...

  Hello technical savvy people!

  Windows Explorer stops working when I click on network and sharing, and also when I click on system.

  -Otherwise, I rarely get this little automatic.
  But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
  nor know how my system!

  Can you suggest healings?
  Thank you for your attention,
  marlem388

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Hope this information helps.

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• Intel wifi adapter xps m2010 disabled in Device Manager and in the network and sharing Center

  Original title: intel wifi adapter xps m2010

  for some reason any my intel pro wireless network adapter not turn on using the shortcut keys or by selecting with the mouse. Says its disabled in device in network and sharing Center Manager yet it does give me the option to activate it. Im confused

  Hi pillowgod,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  You can check the following link and try to run the manual Intel WiFi diagnostic tool to check the functionality of your WiFi adapter.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025780.htm

  You can also try uninstalling and reinstalling the Intel wireless card and check.

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the network adapters in the Device Manager

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  You can also see the Intel Web site and try to download the latest version of the card wifi drivers.

  http://Downloadcenter.Intel.com/default.aspx

  You can also check out the link:

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025807.htm

  Hope this information is helpful

• "Library not registered" in Vista Home Premium in network and sharing Center trying to activate the password protected sharing.

  Trying to activate sharing protected by password in the network and sharing window I get the error message "library not registered. Also, in media player, I get always an error of sharing multimedia. I think that the 2 mmight be bound. PLEASE HELP ME!

  Hi Dj,

  When he the accur first question?

  Have you tried a system restore to a point before the question accurred?

  You can follow the procedure as described below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow steps 7 to place the computer in his usual when you finished the clean boot troubleshooting

  Do the system restore to a date preceding the accurred question according to the link below:
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Reply back with more information for you to help

  Kind regards

  Kiki

• In "Wireless network connection properties" there should be two tabs ('networking' and sharing ""), but it is only 'networking '.

  In "Wireless network connection properties" there should be two tabs ('networking' and sharing ""), but it is only 'networking '.

  Why are there no tab "sharing".

  Hello

  Check the System Services, make sure that the ICS Service is enabled.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• Network and sharing - "the page failed to load".

  The network does not funtion on my new laptop computer. When I try to open the network and sharing, it gives me a white page that says "the page Impossible to load. It worked fine when I had last week. If I look at the devices it is said they work normally.

  Colombia-British

  Hello, spearbc

  Please use the Forum for answers!

  Have you installed a software between yesterday and today?

  To clarify, you get this error in the centre network and sharing, correct? (Image)

  You can try to run the System File Checker and let us know the results, analyze the system-protected files and replace the incorrect versions with correct versions of the files Microsoft.

  Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press ENTER: sfc/scannow

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.