Networking nightmare

Similar Questions

• Windows 7, wireless network connection nightmare!

  I have windows 7 on a hp pavilion laptop computer g6, with bt home hub 3... I keep losing internet connection, I get a yellow dot on the signal wi - fi, then windows icon, run network diagnostics, which resets my network card... What is happening constantly... is someone can you please help me sort this out?

  My wife has this problem, make sure you have the latest driver for the network card.  Check that the issue only occur on a portable "known good" to rule out any problems with the wireless access Point and notify HP for a replacement of parts under warranty if the problem of network adapter.

• Nightmare: How could my * network * lose * part * of a file?

  I'm in a State of shock. Never had anything remotely, as before happens.

  I was working on a file all day. The central command is a 7 laptop. 02:50, I saved the file (software .epub Sigil) I was enslaved on since 07:00 I copy-and-paste the file to a netbook XP, came out and did a lot of work in the following work time value the previous eight hours combined. I recorded it.

  Because I can't send files of XP to the network (XP does not recognize 7; 7 recognizes XP), I went back to the 7. I couldn't find any icon indicating that the XP is connected to the network, even if the netbook has been literally next to the 7 laptop. So I restarted the 7, and restarts, the XP netbook was present once again. I then copied-and-pasted the XP the newest file at 7.

  I open the file on the 7. I'm still lost for the ability to describe what I saw. With the exception of two paragraphs, the entire document was gone. Has disappeared. Went.

  I tried all options of neck earlier restore Ave-Maria. Restore points are versions of the file even earlier than recorded at 02:50. I looked in the trash to see if the 02:50 version, wiped out when I copied and pasted the latest version XP netbook-7, by the intervention of a merciful God would be there. It wasn't.

  It wasn't a question of an entire file endangered. It was a file that was saved, lose a significant amount of data. Before I turn off the 7 and start numbing my pain, I need to know if there is a way to recover the missing data. I will never approve the network again as a way to manage files. You will be if this happened to you: work a full day, disappeared.

  Thank you.

  Hello

  Are the computer connected to the domain?

  If the file is not present in the trash, then I suggest you use your favorite search engine and search for recovery software that can recover the data.

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  I hope this helps! Let us know if you have other problems with Windows in the future.

• HP Officejet Pro L7780 - network letter nightmare!

  Hello.

  I'm hopin that someone can help with a problem I have with my HP Officejet Pro L7780:

  The printer is connected to my wireless network and all is fine with that. The problem lies in the letter from the network that it sets itself on my PC (Windows 7 Ultimate) for the card reader on the printer. It uses the same letter as a virtual cd-rom on my PC drive - and I would like the letter use printer - and not the cd-rom drive, as I have my PC configuration in a way where are grouped different types of readers. Is it possible (possibly via the Windows registry) that would allow me to change the drive letter of the network (as it seems to automatically assign them one) and keep it with this new letter rather that interfere with the cd-rom drive and denying access to him every time that Windows 7 starts?

  Or otherwise disabling the function of card reader on the printer I do not use it?

  Thanks to anyone who can solve this - it's driving me crazy!

  I finally found a solution to this problem that works for me.

  I too have an HP printer that was mapping its card slots memory on drive Z: every time I start my Windows 7 computer.

  To change the map to another letter in order to release the letter Z:, I put a memory card in the printer memory card slots. I then unplugged the drive Z: printers mapping (right-click the Z: drive in Windows Explorer and choose the option to logout).

  I then used the "Map network drive" option on the toolbar of Windows Explorer to map the slot for memory card printer to a different drive letter. [You must know the address (or network name) of the printer to do this: name or network \\[printer address] \memory_card (e.g.: \\192.168.1.108\memory_card). This address goes in the 'Folder' dialog to map text box. Make sure that the option "Reconnect at logon" is checked. And make sure you only select a new drive letter that is not necessary for any other thing later. Then click "Finish."

  After doing this, the printer has continued to use the new drive letter to start instead of Z:, leaving Z: free for other applications.

  I do not think that works above if there is no memory card in one of the printer memory card slots.

• iCloud photo library stuck in an interminable loading which slows down and stops my entire network.

  Last month I've upgraded successfully to El Capitan. Since then, after choosing to automatically download and store my entire library to the cloud, the download process caused a lot of problems. First of all, I had to leave the laptop on day and night and connected to the internet to complete the download. He has almost completely downloaded (with several modem restarts because the massive data download accidents caused connectivity) but then I had a planned trip and had to shut down the process. I tried to start again when I arrived at my destination, but it seemed to have started the process everything again (see below where the progress bar is at the very beginning again when previously, it was almost completely to the end) and close network of my poor host several times AND he ate all my CPU activity slow down and even stop any other activity of the laptop. Finally, I had to leave the process altogether for the rest of my visit. In fact, I had to disable wifi on my laptop because the process continued in the background even when I got the Photos app off the power. When I returned home, I studied the problem and learned how to fix the library by pressing the command and Option keys when I turned on the photo program. Once, the process started all over again and this time, he showed an any number of items to download (there was less than 25 000 points before this download now it shows more than 26,000).

  

  Finally, I got it at the Apple Genius Bar, in the hope of a quick solution. He, even, fixed the library as well as a few other permissions by using Apple's Diagnostics. Everything seems to be working again, but the process had to start all over again for some reason any and he told me to connect the laptop to the modem via a cable and left running overnight until the process completed. I did it. The first night, I was happy. It seemed that 25% of the process had already been completed. At this rate, it wouldn't take another 4 days. He told me that when he gets in, he would never to do it again. HOWEVER, after the second night of leaving it night directly connected to the modem, I checked it this morning and it seems to have started all OVER AGAIN FROM THE BEGINNING! Still, he hangs up my entire network. I can't watch the Apple TV, or use my iPad for work or my iPhone to access and other plans. Currently, there seems to be a nightmare without end of download and spoil my network (and notice that there are now more 28 000 points).

  

  This is intolerable. I can't live in this endless loop of photos download crashing my network and slow down my programs. I understand that this is not a problem isolated to me. So, did anyone found one simple solution other than its use onedrive or flickr or another synchronization photo program?

  28 000 pictures takes a lot of time - it took me ten days to 7000 and whenever you try to 'fix' it do you it longer - I stopped mine during the day when I was home so it wouldn't screw up my internet access form other devices, defined the Mac not to go to sleep and turn anytime I don't have internet

  Basically, your choices are to turn it off and not use ICPL or use it and let him complete without constant interference and restart the process

  Once he finished he initial transfer it stays out of the way, even with large updates (I added more than 10,000 photos since my initial download)

  LN

• 8610: network problem

  In our office, we have two hp 8610 all-in-one ink jet and 4 computers in the same network (workgroup) wireless.

  Among the printers inkjet scanner only 2 computers. It scans well all computers, but does not scan from himself (to 2 computers). Once everything has worked fine now all of a sudden, it turned into a nightmare.

  Hey @Haco_the_Great,

  Welcome to the HP Support forums!

  I see you have some problems with scanning your Officejet 8610 e-all-in-one printers to two of your windows 10 PCs. I can help you with that.

  First of all, we will refresh all connections associated with the printer. To do:

  Turn the printer and the two PC the printer cannot scan to off.

  While the printer is turned off, remove the power cord at the back of the router for a minute.

  When all the lights are coming back on the router, turn on the printer.

  Try to analysis on both computers.

  If you are unable to scan to those PCs, we will then uninstall and install the software on two PCs that the printer is not able to scan to. You can download the latest version of the software by clicking this link.

  At this point if you are unable to scan to these PCs then we will disable all anti-virus software, firewall and security on PCs and try to scan the image to them.

  Please let me know if this helps digitize from all of your devices, or if you have any other questions. If not, have a great weekend!

  If it solves your problem, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

• another network with my Ip address?

  A message appeared saying: "another network has the same IP as this PC, I checked the network administrator and conducted an audit and found no problems.

  I also checked for antivirus updates and no problems were found. I recently signed up for Yahoo. This has something to do with the IP address?

  Hello Silvia,.

  I don't see how to sign up for Yahoo this would cause.  Although this is stated in the reference below, it is IMPOSSIBLE to have two identical IP addresses on the internet.  There are sometimes common sense as well as the technical reasons for this. You can read or skip to the next section you choose covering some basic concepts of networking that can help as I don't know where you are in terms of networking knowledge. This could be much too basic or even above your head.  The answer to your question follows this section with an article that will probably the thing and then a search for related sites that cover this problem if this article isn't enough.

  ******************************************************************

  It is a phenomenon of local network because all local networks use one of three ranges for the allocation of addresses TCP/IP based on the number of computers should be connected.  For home use, it is usually begins with 192.168. and two other numbers that are limited by a set of rules.  Most people use 192.168.000.001 (or which is written 192.168.0.1 as address of the router (or gateway) and the local DHCP server, Server DNS and WINS Server (often assigned and controlled by the router, but sometimes by a computer instead for various reasons).  Then network (DHCP server) Configuration is used to assign a range of acceptable numbers for computers that use this number.

  Most people allow these numbers are dymically assigned by the DHCP server to keep things simple - so that a specific computer may change from time to time.  Some devices need an assigned static address (which is reserved for this device which always uses and nothing else is never assigned it on this network because two that are the same on the same network would have caused a problem such that the communication would not have an idea that you choose if selected).  An example might be a stand-alone network printer where the configuration of the printer on any computer using it could be a nightmare if not to change the address of the printer and that nobody was able to connect to it - then it becomes static and then all computers use this address and since it never changes which avoids printer problems.  Another example is the above router other than the same problems occur whenever the computers tried to connect to the internet or connect to what be it through the router.

  Now, if you have two LANs linked together, a problem starts to appear as both may have been implemented with the same philosophy and therefore likely to use the same numbers.  This is often done using a network http://www.ehow.com/how_5329107_use-router-bridge-two-networks.html bridge or can be done through complex subnets creation of each network (more complicated).

  For the more (and perhaps even to understand that, you need to understand the basics of networks.)  Here's a search to find some one who can help you get started: http://www.bing.com/search?q=networking%20basics%20tutorial&PQ=Networking%20basics%20&SP=2&QS=AS&SK=AS1&sc=16-26&form=BSRTSS&pc=BBSR.

  *******************************************************************

  Please see http://answers.microsoft.com/en-us/windows/forum/windows_other-networking/another-computor-is-using-same-ip-adress-as-my/84f10eec-9ff4-4d40-8867-392422367026 which should help explain some things about it (and even if in a forum of Vista, most if not all of it applies to networks in general - so don't worry that).

  Learn more (a lot more, actually) on both computers with the same ip address, see the following Bing search which will give you plenty of resources for this, why and how it happens and what to do when it comes to solving things: http://www.bing.com/search?q=two%20computers%20with%20same%20ip%20address&PQ=two%20computes%20with%20&SP=1&QS=SC&SK=&sc=16-34&form=BSRTSS&pc=BBSR.

  I hope this helps.

  Good luck!

  Kosh

• Xp network & machines Win 7.

  I have 3 computers, two XPand running a race new windows 7.  One of the XP networking two machines (laptop & desktop) works very well & vice versa machine of windows 7 to a (laptop) XP.  The other XP (desktop) machine has become a boring nightmare that I can't access all the Windows 7 machine.  Two XP machines see via a wireless router and also see the Windows 7 machine. Despite the many FAQ, I can't yet the Win 7 machine to access the Office XP machine, although he "sees" it.  He gives an answer of "you are not allowed access-...» "Recognizing the computer name, but it grinds all to stop.   I guess it may be a firewall issue, but don't know what to do.  Any help appreciated.

  Hello

  Maybe this can help.

  
  

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active

  ------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• OfficeJet J4680: Officejet J4680 offline in the middle of Windows 10 nightmare & does not print

  I am running Windows 7 Home Premium 64-bit, and I am logged on as administrator. I am still immersed in an effort to remove Windows 7 after only 10 Windows, but not download or install a week ago. Apparently you updates of Windows is the culprit, and I restored it to what I hoped, was that before this poison pill, but I'm still real messed up. I'm still trying to determine what update caused the damage and uninstall.

  My Officejet J4680 printer hooked up on a print job and would not remove the work hung, so I unplugged and restarted the printer and restarted the computer. This printer has been disconnected, and I couldn't get it online.

  Softwear by printing HP and Dr. 4.7 update installed HP Officejet full feature software scan and driver 14.0.301.0 Got message "HP Support Solutions framework installed successfully. However, there was a problem to download/install HP Support Assistant. He will be tried again later. "Try later on its own or do I have to re - run?

  The network connection seems OK, (active port and driver, both seemed to be correct) and I tried to reinstall printer with "wired (Ethernet) or wireless network. Reinstalled successfully, the printer is shared, printed the test page, Logo Windows and "Windows Printer Test Page" printed, rest of the page is empty.

  All ideas, need more information, or should I just go ahead and try to uninstall the software and try again? Don't know how much of the nightmare of Windows 10 contributes to this. Hope someone has some ideas, that my brain is fried now!

  Hey @vh08-2015,.

  Thanks for getting back to me with all this detailed information!

  It shows your HP Officejet to use a "universal print driver" in your screenshots. In addition, because copies of your printer show installed as 'HPFCEF6D' it indicates that the universal print driver or the Windows driver is used to provide basic printing capability only. It does not resemble your HP Officejet Full Feature print and scan driver is actually installed at all at this stage.

  1. you can permanently delete all the copies of your printer showing installed at this time without worry, as we will reinstall your printer with the appropriate printer driver.

  2. once the printer has been removed from devices and printers (and the Device Manager if it allows) then proceed to step 4 to delete the files Temp.

  3 once the Temp files deleted using download full feature software and driver I've provided previously. When clear us Temp files it erases the download files downloaded and extracted to the installer so by deleting Temp files under step 4 , you will have a clean slate to work with the new download and install.

  4. you should be safe with just after the uninstallation steps I provided earlier rather then by running the brosseuse that you downloaded. Because the package full feature software and driver shows not currently installed and used by your printer probable scrubber won't do much.

  Good luck with reinstall it! I would like to know if you are having problems or have further questions.

• 0x8007043C error code. Help of nightmare!

  DEAR TECHNICAL SUPPORT

  I covered everything, and I could find on the ISSUE of resources. Let's say that each ave is clicked. I have one using my phone to transfer the drivers for my laptop. .. smart but really long. Consumption. Well, I was on each blog tech, telemarketing and chat live since it sank on Aug. 28th... I downloaded every single driver in the lineup that includes it is and the main setting... no due WiFi the WiFi adapter. Dying. Half of the windows. Vista works, but it does not allow me to make a system. Restoration. No windows. Firewall... It's a nightmare. When I'm in the normal node he says that it is in safe mode. Laughing out loud. He picked up cookies but when I was in safe mode. No net. ... very scary... I had to teach myself where it install everything but nothing helps... referring. All the essential elements of this pc. Intel, Microsoft. And Real.trek. (audio and network.) Drivers...) now no sound. I had to plug a retractable mouse that works. I had a problem last keyboard but now even plug in a portable keyboard was not justify the case...

  I plugged power cord of sub 25 feet directly from the router and the modem. He worked for a time Wired, then he's dead...
  I was in all the security modes to try to fix, went into the doc with promo order and almost. All other options of these call failed... but nothing. Windows install is a no present.no fix Windows driver tool would work. . My on that my Manager device wigs and head of security. People with disabilities. Network disabled Center. So no models.
  After the days of download drivers Realtek/Microsoft and Toshiba, I was able bad draw to allow a connection net wide ban with a usb cable wired 25 feet for my modem and now router, t looks like its alive, I read more than 50 articles on blogs, Google was a waste of time. I wrote all the drivers who were exactly in my os Device Manager ' my Toshiba [l505-s5971]. its makes me the limit I need to move away a little to relax outside [frustration], its hilarious I threaten Frisbee out of my window as a joke lol! [She turns on,]. I'm tired of watching my smart phone to the drivers then downloaded on the cell reader.

  going to tech support and all the advanced tricks, I've taught myself to get this statement seemed to be a redundant echo. to go beyond that point and nail it to the wall would be nice...

  This set of issues remain odd.
  * No.
  + None / i keyboard uses the facility to access the screen of this type.
  + pc think its in safe mode [when regular operation mode]
  + all patches from Microsoft and re-downloaded drivers won't download [windows vista 64-bit / x 86 - nie]
  + Impossible to install IE9 on Windows Vista and Service Pack 2 | added no. firewall or anti virus will download. [m, i.a of windows fire wall].
  * no system restore prior to the 28/08/2014
  "It wiped out my suite office 2010 MS, and it cannot be installed even on my cd I bought."
  * no system restore prior to the 28/08/2014
  "It wiped out my suite office 2010 MS, and it cannot be installed even on my cd I bought."
  -its scary to know when he crashed he cancelled the driver in my centron 128 gb USB key, what can I do if laugh, don't know what else to do.

  PS. Here'S MY PC I PLUG solution of the riddle of THE HOPE THAT NARROWS. I hope I can fix with drivers just added and added the statement.

  J-

  CPU0
  Name Intel (r) Core (TM) 2 Duo CPU T6400 @ 2.00 GHz
  Processor ID BFEBFBFF0001067A
  Legend Intel64 family 6 model 23 Stepping 10
  185 family
  Level 6
  Walk 10
  Data width 64-bit
  Clock current speed 1200 MHZ
  Ext clock 800 MHZ
  Max speed 2000 MHZ clock
  L2 Cache Size 2048 KB
  Designation CPU socket
  Role of CPU
  Model version 7, walk 10
  Revision 5898
  Status OK
  BIOS
  InsydeH2O Version 1.50
  INSYDE manufacturer
  Version TOSINV - 1
  Colloquial
  Description InsydeH2O Version 1.50
  Primary BIOS Yes
  Serial number 79546323Q
  SMBIOS BIOS Version 1.50
  SMBIOS major Version 2
  SMBIOS minor Version 4
  Processor
  CPU0
  Name Intel (r) Core (TM) 2 Duo CPU T6400 @ 2.00 GHz
  Processor ID BFEBFBFF0001067A
  Legend Intel64 family 6 model 23 Stepping 10
  185 family
  Level 6
  Walk 10
  Data width 64-bit
  Clock current speed 1200 MHZ
  Ext clock 800 MHZ
  Max speed 2000 MHZ clock
  L2 Cache Size 2048 KB
  Designation CPU socket
  Role of CPU
  Model version 7, walk 10
  Revision 5898
  Status OK
  BIOS
  InsydeH2O Version 1.50
  INSYDE manufacturer
  Version TOSINV - 1
  Colloquial
  Description InsydeH2O Version 1.50
  Primary BIOS Yes
  Serial number 79546323Q
  SMBIOS BIOS Version 1.50
  SMBIOS major Version 2
  SMBIOS minor Version 4

  Processor
  CPU0
  Name	Intel (r) Core (TM) 2 Duo CPU T6400 @ 2.00 GHz
  The processor ID	BFEBFBFF0001067A
  Legend	Intel64 family 6 model 23 Stepping 10
  Family	185
  Level	6
  Step by step	10
  Data width	64-bit
  Current clock speed	1200 MHZ
  Ext clock	800 MHZ
  Max clock speed	2000 MHZ
  L2 Cache size	2048 KB
  Socket designation	CENTRAL PROCESSING UNIT
  Role	CENTRAL PROCESSING UNIT
  Version	Model 7, walk 10
  Review	5898
  Status	Ok
  BIOS
  InsydeH2O Version 1.50
  Manufacturer	INSYDE
  Version	TOSINV - 1
  Colloquial
  Description	InsydeH2O Version 1.50
  Primary BIOS	Yes
  Serial number	79546323Q
  SMBIOS BIOS version	1.50
  SMBIOS major version	2
  SMBIOS minor version	4

  Cannot install Service Pack 2

  Why Vista SP2 has not been installed years ago?

  PS: It is a peer-to-peer support forum, not an official Microsoft Support forum. If you wish, you may take support sponsored by Microsoft through the Office of response-online http://answerdesk.microsoftstore.com

• Why my network connection properties do not show more UAC prompt?

  I can't put my connection properties more. In network & sharing center when I rightclick > properties on the connection interface, it shows no UAC prompt. I have disable Netbios over Tcp/ip, but every time that I connect it changes to default (enable netbios..). I'm the only Admin with 2 profiles on my personal laptop without connection (wired / wireless, office, etc.) of local network either. Earlier, the same connection worked fine with the settings 'disable netbios. I tried to create the new connection (same ISP, USB 3 G dongle), reinstalled the drivers of network cards, deleted the old connections, but the problem persists. I can't set my connection properties!

  I noticed most of my local network/Services have a profile not attached with long unknown password. New connections I make in a user profile does not show in my another user profile, it wasn't like that before. I want to know the default TCP/IP registry, in particular Linkage, Bind, export etc if this may be the reason. (Values in HKLM/System/CurrentControlSet/Services/Tcpip/liaison & Interfaces examples / by default). Of course the values may differ in each machine, but I want to have an idea.
  Finally, I would like to see some improvements in security in the next editions of windows. UAC never warn you when some outsider load .reg hives or changes to the settings, it annoys only his own user/admin. Our firewall is open for the subnet Local in the discovery rule of the network for the network private by default, assuming that we are all connected to the cable network of offices. There is also two versions of the firewall for home users specific & businesses users. It is impossible to uninstall a Service it it gets corrupted or protect the process svchost.exe/legit if someone hacks. Coz anti-virus software fails to catch the thieves hidden legitimate process. UPnP, printer ports, of the discovery of the network are all known loopholes in windows firewall forget remote things. If someone makes an unknown connection to my PC something must warn me at least. With fast connections to today I don't think that any Messenger needs firewall exceptions. It is unclear what programs/services the firewall knows & blocks ("all programs/services that meet the criteria"), it should be editable to all net database using software/services, which can be exploited by the bad guys. I don't see any logic in the purchase of an operating system, then buy a firewall too, it should meet. Also a protection tool for our vulnerable register which is originally from the success of a rival to round shape & red/green color used to make a pie & a big city is named after it. :-)
  Thank you! -Manish. 17/10/12
     
  Hi, Maria Teresa K,.
  Thanks for the reply with some good suggestions & I love your header "Refreshing Office & opening word doc", operations, sometimes even what is more difficult and more complex are easier in windows.
  -Very well, it was related to administrative privileges removed by a hacker or my ISP. As I've seen Undocked profiles with long password in most Network Services & Local such as RPC, BFE.
  I wasn't starting in safe mode with networking (press F8 at startup), then then ran mode Directory Services repair as well. Finally called my ISP was no Sim Card of my 3G dongle. is CHANGED!
  Then as a last solution, I have my Dialer app right click & he ran as administrator. This time I could see UAC prompt while clicking network map & could set the connection properties.
  You were right about my two profiles being Admin & it took place in both, so they used netuser thing (that infamous Director of integrated hidden a/c. which is not known by the users but is well exploited by hackers). I saw this profile sunflower photo in my profile %-appdata-temp folder, I use different images for my two profiles. Also, someone wrote to Parvdm port I checked later, I don't have any printer at all, so this hack port printer & file and printer sharing is the culprit. Anyway now it seems fine, only this soft dialer privilege token is set, then run it as administrator, it's funny that I am the admin.
  Yes, I ran several system restores but this intrusion is older that my restore point limit, yet once no way to keep/save our best Point restaurant forever. Not sure/easy way to fix a corrupted user profile, to copy all in a new, most of the software refused to work, a lot of customization needs to be redone. This change of name ntuser.dat is too scary, what happens if I can not log on later, I had a nightmare with LogonUI.exe when I applied a 3rd party desktop theme shit earlier, I had to reinstall windows. So start, logging on things that I dread, all must keep a portable external drive with windows & its profiles.
  Now, I read & know using Standard user instead of administrator has a/c. for browsing the net, but this theory does not work in practice so many apps to keep updated/re-installing 5.0.6.1 versions each week, and many apps produce UAC guests. Half my time wasting on typing Admin password in the profile Standard exposed, much easier for keyloggers to record it & then secondary logon also runs with remote registry, management of firewall remotely etc. OK, they are not checked in my Public network, but they are in the list of the firewall exceptions for can not show WARNING!
  My current problem is solved, but I insist on these few things to develop;
  (a) a separate tool for the Protection of the independent record.
  (b) with HKLM and HKCU a separate HKLW & HKCW for Windows registry keys that is Unchangeable no matter what. To do this, future apps should be as portable as possible.
  (c) more intelligent firewall multimode, antivirus, recovery tools built in, checked the IP range for windows updates/upgrade. Services and process manager.
  (d) the names of files dynamic with static virtual names for the same. Password for any whole folder/usb/removable/external drive.
  (e) all the hidden info, exposed in detail to the owners of the OS, not for some professionals, don't worry not bad know all this, so why hide from users. for example, I don't like the unknown password in BFE service responsible for firewall, if it is managed by others, then what am I doing here! In order to better help files offline if you please.
  (f) all stay is discussed by experts revered worldwide.
  Thank you! -Manish. 21/10/12

• Network IO on OS5 coup

  I am having some problems with my network code IO on OS5 of BlackBerry.

  I get sporadic crashes and eventually TCP timeout exceptions during my IO operations.

  I use the 5.0 network API to establish the connection works perfectly every time.

  The problem is when you do the actual IO. I have a background worker thread serving a queue i/o requests. There is only a single background for all thread requests are serialized on this thread.

  Completion notification is made through a delegate interface that is passed when the request is pending. The completion delegate is called on the thread of substantive work, but guests are free to repost this to the event via invokeLater thread make UI updates etc.

  Notes:

  I did some file download large treatment OS 5.0, including "BOLD", 9520 and 9700 devices.  All of these simulators are desperate, they lock themselves in the same reading that you have identified.  the 9520 is the best, rarely, it crashes and is a little better with BONES later.  However, the 9700 is a nightmare.

  What I did, it is a mechanism of stall detection, code if I'm stuck in this loop, I therefore interrupt the flow, and try again.

• Nightmare config of SSM - AIP 7.0 (1) overall correlation.

  Thank you, Cisco, for the creation of a nightmare of management with your "Overall Correlation" option in version 7.0...

  Lets start with the management interface of the AIP-SSM-20...

  We have an OOB management network, with a single PI in this by another device of PIX515E. Both the ASA5540 AND the AIP-SSM-20 are in this network.

  The first issue was in routing, as the ASA sees the "directly attached" management network, and we ROUTE traffic via the PIX of updates on the SSM module, we had to add translation entries in the PIX515E for the SSM (management 10.x.x.x, translated of 172.x.x.x) module.

  It wasn't a big deal, but this is where the nightmare begins...

  First a note: we have locked network management CLOSE, only a few network management stations authorized in this network to access these devices.

  I activated the overall correlation in test mode, but it was 'impossible' whenever he tried to update... Reading other posts, I created ACLs and static NAT in the PIX515E for these IP addresses:

  204.15.82.17 (IP listed in the IME global correlation update server)

  97.65.135.170 et.137 (from another post in these forums)

  207.15.82.17 (IP found in a trace)

  Still no update. Research in the papers of PIX, I found "no translation" entries for the following addresses:

  198.133.219.25

  209.107.213.40

  208.90.57.73

  I put these in, and he started to be updated! FIXED? NOT!

  This morning, he wasn't yet... Looked again into the PIX logs and found these:

  77.67.85.33

  77.67.85.9

  Registered, and the SSM is happy again. How long? Who knows?

  So, now I have NINE holes in my 'secure' network, and who knows what Cisco will change or add new IP addresses to this list.

  Cisco, if you listen - ALL access to the overall correlation with a single IP address? PLEASE?

  (use the one listed in the IME - 204.15.82.17 for the URL "manifests.ironport.com" - updated)

  Some of the addresses are owned by Cisco (initially ironport.com addresses the acquisition of ironport) and are used as clear servers to provide the sensor a list of files to download.

  The sensor then downloads the files from servers Akamai. Akamai has a large number of servers around the world. Cisco sends the update of Akamai, and they reproduce on their servers. When the sensors are trying to connect to the Akamai server it is a DNS query and by controlling the DNS response, it can lead more sensors to an Akamai server located near the sensor. This allows better load balancing, response time and download speeds.

  However, Akamai has a large number of global servers (in thousands I think), and you can't predict what your specific sensor server is directed to.

  Sensor for connections to the servers from cisco for the manifest (list of files) is on port 443 and usually the update URL - manifests.ironport.com.

  Sensor connections to Akamai servers for actual file downloads are on port 80, and usually to the updates.ironport.com URL.

  The above is based on my limited knowledge of the operation between the updates. I may have gotten the details slightly wrong, but should at least give you a general idea.

  I will work with development to get to this better documented in the Release Notes and the Readme with the next version of the IPS software.

• Create Cloud installation - a nightmare

  It must be, probably the worst nightmare of the installation that I was, and I just spent 4 hours trying to figure out what is happening.

  My internet connection is OK, my computer is OK, I tried several browsers to download the installation tool, I have full administrator rights, I used the advice "click Start as Administrator", I went through the newspapers about 40 times, also in safe mode with network. I searched and followed on 30 threads on the internet where people have the same problem. I spent about $ 1,000 this software and even the first thing, installation, does not work? I mean, if there is something wrong here, why not write some more specific error codes?

  Unable to install - error code 1

  Adobe CC cleaning tool wont even install... simply, it flashes and disappear

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Failed to create the pool of network VXLAN

  I tried to get VXLANs working with the vcloud Director, but have had a problem that I can't work on it would be really grateful for the help.

  I went through the config VXLAN Vshield Manager and I think it's ok that I can manually create a pool of network a network, create a virtual wire and attach VMs. If everything looks good. My problem is that when I create a provider VDC in Vcloud Director the associated network pool creation always fails. I don't have to provide the exact error message, but it is something in the sense of 'Vcloud Director received an unexpected response or Manager unknown Vshield, see the logs for Vshiled Manager for more information'. I looked in Vshield Manager logs and can't really find something useful, but it is a bit of a nightmare, I can just be looking in the wrong place.

  Anyone got any ideas?

  TIA

  can you confirm/update of credentials here:

  connect to vcloud

  go to list of vCenters manage and monitor

  Right-click the vCenter to that that vShield Manager is associated

  Click on properties

  update the user names and passwords in two tabs

  Click OK