never complete Windows Update is installed

Similar Questions

• Windows Update cannot install KB2656353

  Windows Update cannot install KB2656353 on my Windows XP Professional SP 3 machine.  I tried to update windows install to 4.5 & manually install the update, but the installation stops when someone asks me for the Microsoft .net Framework 1 (disc 1).  How to solve this problem?  Thank you.

  Hello

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow the steps.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article to reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• No windows update will install on my computer.

  No windows update will install on my computer. Tried to remove and disable the Antivirus software, but I can not install any of them. When I downloaded and tried to install Service Pack 2 it returned this error "E_UNEXPECTED 0x8000ffff".

  Any thoughts?

  Hi Aaron,

  There are several resolutions by Microsoft engineers, described in detail in another thread on this forum: http://social.answers.microsoft.com/Forums/en/vistawu/thread/ecab6071-9b1a-465b-a451-06cd1c24a671.  One of these recommendations should solve your problem.

  Barbara

• Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

  I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

  Alan McC
  Do you have other accounts of users on this PC?  If you install this update from the main account?

  You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
  If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Stop windows update to install Nvidia driver version 52.16

  Hello

  Recently, I upgraded the PC of my father to WinXP SP3. It is an old DELL Dimension of 11 years. After installation there is a nagging question that won't stop.

  Windows Update keeps trying to install the following:

  MICROSOFT VIDEO NVIDIA GEFORCE 4 MX 420

  NVIDIA driver version 52.16

  This update is not necessary for the monitor to run.

  So far, my difficulty was to start in safe mode and back the driver.

  Windows Update repeatedly installed this driver. I have

  detailed instructions on how to block this specific update to settle here.

  Thank you

  Dwayne Boyd

  To hide an update in Windows XP, just go to the Windows Update site and uncheck the update and click on the + sign next to it. At the bottom of the explanation expanded the update the checkbox to hide this update become active and can be selected, thus masking the update.

  Then, you need to remove the update from the temporary folder:

  Stop the automatic updates service

  Click Start, choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click on stop.
  Stopping the service will take a moment.

  Delete the content of the download folder
  Click Start. Choose run.
  In the run box, type %windir%\SoftwareDistribution
  Click OK.
  Open the download folder.
  Delete all the contents of the download folder.
  Close the window.

  Start the automatic updates service
  Click Start. Choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click Start.
  Starting the service will take a moment.

  By removing the contents of the download folder - you have removed all downloaded
  updates.

  Now, the next step would be to configure Windows Update in order to warn only rather than automatically download and install updates. In this way, you stay in control.

  http://support.Microsoft.com/kb/306525

  Click Start, click run, type sysdm.cpl, and then press ENTER.

  Click the automatic updates tab, and then click to select an Notify me but don't automatically download or install

  I hope this helps.

• Error 8024402f Windows update after installing service pack 2.

  I received the error: 8024402f for windows update after installing service pack 2. I tried to fix it and manual fixation on this website http://support.microsoft.com/kb/836941, but I still receive same error code what do I do? I checked the history update, but it is not a failure to update.

  Original title: 8024402f error Code

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  We'll do this before uninstalling Service Pack 2.

  If the behavior persists, then we can clean boot, uninstall and reinstall Service Pack 2.

  Best regards

  Matthew_Ha

• Windows Update crashes, install update 16 of 18

  Original title: windows machine update caused to hang

  The machine seems to have hung over the windows update process - the rest of the screen to "do not turn off or unplug your machine." Installation update 16 of 18. At this point, he remained for over half an hour. What can I do?

  Hi Alfredlee,

  If the window is still blocked on the installation of update page, you can restart the computer, choose start normally and check what is happening.

  Step 1:

  If you are not able to boot normally to the desktop, you can consult the following link and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover updates failed by following the link:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• So, how can I knowif and Windows Update has installed correctly. Because my computer closed connection or and I have to restart.

  Theres times that I am on my computer and I lose the connection and theres times I'm on facebook or a game. And I try to go up and down.  and stop it stops in the middle of a game or facebook. Sometimes it I see the line over and over again.

  Hi Jo AnnHerrera,.

  What browser do you use to play games?

  You can visit Windows update history to check the recently installed updates, failed.

  Check the update history to see what updates have been installed. Visit the below mentioned link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  If you use Internet Explorer to play games, refer to the suggestions from this link.

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

  I hope this helps.

• How to control the Windows updates are installed on the Windows Surface of RT

  I recently had to perform a refresh to solve the problem with desktop on the desktop icons that appear as spaces. After the update, I had to reinstall the update for Office 2013. When I went to Windows Update to do this, I found it with a group of 9 other updates, these 9 were all marked as ready for download and installation, Office 2013 update is not checked. I disabled the office 2013 update and not the other 9 updates, thinking that I could make those after I had Office installed upgrading so I would like to know if my taskbar icon problem has been resolved. At the bottom of the screen even when the Office update was the only update checked I chose to install updates. The Surface actually installed all updates, not only the update of Office.

  Is there a way to control which Windows updates are installed in fact at some point? Unchecking them made no difference.

  Hello

  Welcome to the Microsoft community!

  I understand that you are facing problems while installing Windows updates and want to know if there is a way to control which Windows updates are installed in fact at some point. I'm here to help you.

  I suggest to refer to the following article and perform the steps mentioned there.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-8/troubleshoot-problems-installing-updates

  Automatic update of Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Windows Update cannot install the update of Security No.2686509

  Windows Update has tried about 18 times to install the 2686509 update, and it does not reach every time, how can I install it

  Hi LyneDerksen,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• error 80240016, windows update currently installed other updates please try aain later

  error message 80240016, windows currently installed other updates please try again in a few minutes.

  There are 4 updated to install the downloads that I tried to install separately, then together with no luck. I also went to the typed command prompt: net stop wuauserv (enter) then start wuauserv (enter).  Then tried to install again with the same answer. I rebooted without success.

  Help, please

  Step #9 should resolve the error 80072EFD. If this is not the case, things are worse than I thought.

  Norton Security Suite includes a firewall: If the Norton Personal Firewall is enabled, Windows Firewall must be turned off (and vice versa).

  NB: you must complete the steps #3, #4, # 5, #8 & #9 once again before install you Microsoft Security Essentials (this is why I now recommend MSE installation).

• Not able to complete Windows Update - KB3069114

  Hi team,

  Please help me to complete the installation of Windows Update - KB3069114.

  I am very disappointed by the policy update. Updates are very useful to continue our work accurately and safely. But here I'm stuck because of the updates. As part of my regular office work it may be that I need to update my laptop regularly and if an update fails I will be unable to connect to my map of RAS.

  This update I received 7 September then I am not able to complete the Installation of the update and I am completely stuck and not be able to finish my office work.

  I tried all possible ways to complete

  1A tried to manually install the update by downloading - not done

  2 played clean boot - not done

  3 clean the registry and I tried to restore by MARIKEL - not done

  Please help me on this.

  Thanks in advance.

  It is extremely rare that he would repeatedly hang in the same place. Please try the following command from an administrator command prompt:

  NET STOP WUAUSERV

  RMDIR /S /Q %windir%\SoftwareDistribution\Download

  CHKDSK C: /F

• Cannot change how the important windows updates are installed 7

  I can't change the settings of "Windows Update".  I don't want Windows to automatically restart my system so I put it to 'Application prior to installation', but this morning it is automatically installed and rebooted.  Now, I don't have the ability to change the parameters, as if I'm not administrator.  The option is there, but not highlighted for to change me.

  Hey CGEnterprise,

  To the configurable options for automatic updates, follow these steps.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

  Step 1:

  1. go to start and type regedit.exe.

  2. go to this location:

  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU

  3. in the right pane, delete the two values AUOptions and NoAutoUpdate

  4. go to that location:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate

  5. in the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor

   

  Notes:

  o you must have administrative privileges to perform these tasks.

  o Group Policy Editor is only available in the professional edition, full and Windows 7 Enterprise edition. You will not have the Publisher of local group policy available in Windows 7 Starter and Home Premium editions.

  Step 2:

   

  1. Click Start, type gpedit.msc and press ENTER.

  2. navigate to the following location:

  Computer configuration > administrative templates > Windows components > Windows Update

  3 in the right pane, double-click Configure automatic updates and set it to not configured

  4. then, go to this location:

  User configuration > administrative templates > Windows components > Windows Update

  5. in the right pane, set to remove access to all Windows Update features on not configured

  For more information:

   

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.