New ASA user denied access to 2 guests
I am very new to the management of Cisco equipment. I received and pre-configured and ASA5510 and recently asked me to block external access to 2 guest on my network. I created a group host/network and added the 2 hosts to that group. Then, I created a rule in my acl to deny access to this group out of the interface of dest. My second rule in this acl allows access to my subnet private to any entrant in the interface of the CBC. When I applied these rules the whole subnet loses connectivity. could someone lend me assistance with this or perhaps point me in the right direction?
Thanks in advance.
I wasn't questioning you, ensuring only that I knew what you wanted to achieve. If you have created an access list and applied inside the right interface? As soon as you do this and put your nie, you need an IP permit any one to the end. There is always a clear refuse at the end of your acl. Of course, which is ok, if that's your intention, but if not, you must add the permit. Make sense?
inside_in list extended access deny ip everything
inside_in list extended access deny ip everything
inside_in of access allowed any ip an extended list
inside_in access to the interface inside group
Tags: Cisco Security
Similar Questions
-
Account deleted user denied access...
Hello
I have a problem of Windows XP Home Edition.
Something has happened to the computer and we needed to reinstall XP; There are 4 user accounts that have passwords and files were not shared. After you have reinstalled XP, we have recreated the same user accounts, but records remain inaccessible "access denied."
Is it possible to access these files again?There are a lot of image files that we hope to be able to access to the rather than taking space and we do not have access.
Please help, thank you,
Sheila
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
user denied access to a shared folder on windows 2008 Server
Hello I have a user who logs on to the domain, but access denied to the shared folder. I am admin on the server. I looked into his account and it must have access. Where should I look?
DT
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
new firefox user, cannot access gmail
I did use Firefox in a very long time and downloaded to my Macbook Air. I can't have any cookies or cache yet, what I can, which would block me to access the Gmail page? FF says that the page may not load.
So this just link expires, or is there any other error message?
https://accounts.Google.com/ServiceLogin?service=mail
Could you try two other tests:
- Load the page in a private browsing window, assuming that you are currently in a regular window. You can do this by clicking the link (or long-pressing, if any more for Mac) and selecting Open link in a new private window. It will bypass all existing files updated in cache and cookies set by Google in your normal windows.
- Try the site Firefox Safe Mode. It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode. See below.
You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
Not all add-ons are disabled: Flash and other plugins still works
After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).
Any difference?
-
I click on certain folders or files to access and a window pops up saying: "access denied." Nevertheless, I have a user 'administrator' account, so why would I refused access? I'm really tired of Windows 7, doing so and would like a replacement that will allow me access to WHAT I want - after all, it's MY computer, not Microsoft!
Hello
1. are you aware of any hardware or software changes, prior to the beginning of the question?
2. is the computer connected to the domain?Method 1:
You can also try to give permission to the files.
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-messageMethod 2:
If the problem persists, we create a new administrator user account and transfer all the data to the new user account. Link below will help you to create a new account and transfer all data and information
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps. Get back to us with results.
-
the user administrator access denied
the following error occurred during which to save properties for user administrator
access is deniedYou are a member of the Administrators group? You need administrator privileges to run the task.
John
-
user accounts suddenly denied access to games standard
OS is Vista Home Premium. I created two centuries ago user accounts. I am the administrator and have no problem. My husband is defined in Standard and until Friday 4th has been able to play an installed game he plays online. Suddenly, he is unable to play because he gets the message:
"Windows cannot access the specified device, path or file. May not permissions to access you the item.
Also, the icon of the shortcut to the game and read icon via start it > programs method changed to the type of icon where see you installed updates to windows. a rectangle with a small green square. Please note that nothing seen via my user account.
If you set my husband to user account to be an administrator, or if you try to run the game "as an administrator", you still get the same message as above.
If you view the permissions for the game that he has "full control". View permissions for the game through my user account says 'Special permissions' and I can easily play the game.
I would like to know what has happened to cause this and also how to fix it.
Thank you very muchThanks a lot for your suggestions.
In response, I created a new standard user account and had the same problem on all standard user accounts. Then removed them.The problem occurred after a recent update of Windows, that somehow changed the permissions on some downloaded files. The UAC was responsible in some way. I guess I could undo each in turn to find out who we caused the problem, but decided to do so only if no other method could be found.
You can easily see which applications have been affected because the Apps icon has been changed into an icon of the window - a rectangle with a small green square in it.
In my case, my husband took ownership of a game and a control total seen on the Admin account, but it was ignored. If you are looking for the game in the list of the found program via the Start button and right click on the game and select Properties... this method does not work... or can run you as admin.
However, I decided to try the following and have had a result.
- I opened his account (note that whenever you are prompted to enter the Admin password to continue).
- I clicked on the "Start" button and find the game in question under the "Programs" list
- I then click right on this game and selected for "open file location".
- Then, I selected the Application file (exe), right click and select "Properties".
- Then choose the security"" tab.
- My Admin user was in the list, but my husband's name was not if I chose to 'Edit' then 'Add' his name and user account.
- Applied and could I stand it and the icon for the game immediately changed to show the correct and original icon with a windows shield attached.
- I then click on the game again and selected to create a shortcut that I placed on the desktop.
The game now runs from his account.
Solved :) -
Recently we have heard people talk of "Cisco ASA several flaws let users deny remote Service and bypass the security controls" under the securitytracker. However, as everyone knew, ASA 8.3 need a lot more resources on ASA HW to run. I checked that the bugs associated to above problem "CSCtg69742, CSCth36592, CSCtg61810, CSCte53635, CSCte46460, CSCte20030, CSCtf29867, CSCte14901, CSCsz80777, CSCsz36816" in the Cisco Bug Toolkit. None of them show any information if there is a fix for ASA 8.2 (x).
This means that Cisco starts to stop supporting 8.2 (x) and to push customers to their "so-called" best image 8.3 version (x) as a strategy of "marketing?
Cisco is best to find a solution for this problem on 8.2 (x) rather than push customers to something Cisco "love." It may not be the best interest of the customers AT ALL. Instead of pushing customers to ASA 8.3 (x), Cisco likely to push customers to its big competitor Juniper:)
Sean,
I did a quick search on the Bug Toolkit for CSCtg69742 and found the following result.
Fixed in
8.2 (3)
8.3 (1.5)
8.3 (2)
8.2 (2.15)
8.2 (2.107)
100,7 (0.17) M
100.5 (5.16) M
8.3 (1,100)
100.7 (6.1) M
8.4 (0.99)This was posted in the column on the left side of the search results page.
I recommend you research each ID of Bug Bug Toolkit (http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs) for the version name (number) that contains the fix for this bug.
HTH
Amol
-
How can I tell if a user has access or was denied access to
How will I know if a user has access or denied access to DBMS_LDAP without actually running the package.
If access is denied how to grant and revoke access?
Help, please!
Thanks in advance.
Published by: user12027903 on October 19, 2010 11:42Just check inside the DBA_TAB_PRIVS data dictionary you can get the details.
Thank you
Aurélie -
New user cannot access any area of activity
Hi, I use Discoverer Desktop 9.0.4.43.17 and administrator of 9.0.4.43.18 and I have a new user cannot access any sector of activity, I tried to create a new business district to test and access the Security window on the Client of Directors for this user and my user (works very well!), for my user that this new BA shows normally on the desktop but for new user the selection of business on Assistant workbook area shows nothing. It's something to measure new users to access the space business?
Published by: user2997975 on 06/04/2009 07:19Hello
As suggested by Rod it sounds as if you may have several EUL in the same prod73. Try to connect again, but this time go to tools | Options and click the EUL. It is the last tab on the right side and you may need to click the button to the right (next to connection) several times before seeing the EUL tab.Under the EUL tab, make sure that the EUL you want to connect is selected. If it is bad you will need to change it, click on the OK button and then reconnect to the database using file | Connect to the database.
This time you must point to the right EUL.
Best wishes
Michael -
How to deny access to all users except the administrator?
Original title: need to deny access to everyone but me, administrator, The easier way?
Been hacked! IM the administrator & need a way to block ALL HUMANS access to the content of my files. looking for a simpler, more efficient way!
You must encrypt your files. Before you begin, be sure to follow these steps:
- Fully familiarize yourself with the technique.
- Encrypt a test file, back it up to an external medium, then pretend that your PC got stolen. Now try to decipher the saved the file.
Remember - modern encryption schemes are the test of the crack. They do not distinguish between you and the owner and a pirate. They care only about the certificate or key. -
Need to deny access to the file for the User Manager
Hello
I need be able to deny access to the file manager, as I don't want my client, deleting files. However, for some reason, I have to allow him access to what he should be able to download files via InContext Editor (he needs to link the pages to documents that are not on the server so he needs to download and do it, I have to grant access to the file manager). How can I get around this? I don't want to reupload the site whenever it deletes a file...
Unfortunately we can not do - file manager access to removal as well as download and at this stage that cannot be changed.
-
AnyConnect users can access internal network
Hello!
Just sat up a new Anyconnect VPN solution for a customer. It works almost perfect.
Anyconnect users can reach the internal network storage. The anyconnect users can access the internet, but nothing on the network internal.
(Deleted all the passwords and public IP addresses)
ASA 4,0000 Version 1
!
ciscoasa hostname
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.9.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address
!
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 213.80.98.2
Server name 213.80.101.3
network obj_any object
subnet 0.0.0.0 0.0.0.0
access-list SHEEP extended ip 192.168.9.0 allow 255.255.255.0 192.168.9.0 255.255.255.0
AnyConnect_Client_Local_Print deny ip extended access list a whole
AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137
AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns
pager lines 24
Enable logging
logging of debug asdm
Within 1500 MTU
Outside 1500 MTU
mask 192.168.9.50 - 192.168.9.80 255.255.255.0 IP local pool SSLClientPool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) source Dynamics one interface
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
Route outside 0.0.0.0 0.0.0.0 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
LOCAL AAA authentication serial console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http 192.168.9.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Telnet timeout 5
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.9.2 - 192.168.9.33 inside
dhcpd ip interface 192.168.9.1 option 3 inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.3046-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal SSLClitentPolicy group strategy
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
value of server DNS 192.168.9.5
client ssl-VPN-tunnel-Protocol
the address value SSLClientPool pools
attributes of Group Policy DfltGrpPolicy
VPN-tunnel-Protocol ikev1, ikev2 ssl clientless ssl ipsec l2tp client
VPN Tunnel-group type remote access
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
Group Policy - by default-SSLClientPolicy
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:6a58e90dc61dfbf7ba15e059e5931609
: end
Looks like you got the permit vpn sysopt disable to enable:
Sysopt connection permit VPN
Also remove the dynamic NAT depending on whether you have already configured under the NAT object:
No source (indoor, outdoor) nat Dynamics one interface
Then 'clear xlate' once again and let us know if it works now.
-
permissions of origin title: special
I am the owner of everything on my pc I don't have special permissions for some individual files that I find quite strange. It also means that I can't delete some files. I tried to access the files when I started from a different hard drive, but still can not remove. While I followed all procedures to address this issue, I still do not end with special permissions. Is it possible to modify or delete the files from the MS DOS window or is there something that I am missing. I also found it seems to be an 'unknown user' in the permissions area, and when I try to delete or change this 'unknown user' and a second show. 1 then said who is denied access, but the other has access. No matter what I have I can not get rid of it! And file sharing is disabled disabled! Help, please
In Vista, many files can not even to administrators. Some are to protect the user from making mistakes (like many in the Windows directory and in your personal profile). Some are points of junctionhttp://msdn.microsoft.com/en-us/library/bb968829 (VS.85) .aspx which are there for backwards compatibility and should not be modified in any way (and certainly not deleted) or you may not be able to use your programs or may even damage the system to the point where it will need to be reinstalled). You shouldn't need special permits to delete a file if you have all the rights, but special permissions can block access and that's sometimes how it blocks even administrators. Keep in mind that XP administrators had access more than them in Vista - blocked is not necessarily a problem, but intentionally by developers of Vista.
However, if you're talking about files that you devriez have permission, then the following information about the ownership and permissions can help you.
To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.
To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.
I hope this helps. If this isn't the case, after return and we'll get the exact path of these files to make sure that you really can visit his profile and try adding special permissions. I suspect that the problem is that everyone is denied access and blocking everyone - but we'll check (if necessary).
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I saw myself denied access to i tunes
I myself have denied access to i tunes by accessing the folder in program files and right click and hit properties. How can I give my free i tunes access authorization if no one on my computer is allowed
To restore default security settings, follow the instructions of Vista in the present.
How to restore the security settings the default settings?
http://support.Microsoft.com/kb/313222/#appliesToDo you deny that the directors of the group access or simply your username? If only your username, then you can be able to create a new administrative user and cancel the permissions through that. You can also look at using the account Builtin Administrator to do the same thing.
Enable the (hidden) on Windows 7 or Vista administrator account
http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/HOW to: Appropriating a file or folder in Windows XP (or Vista)
http://support.Microsoft.com/kb/308421/en-usError message: "access is denied" when you try to open NTFS file system folders
http://support.Microsoft.com/default.aspx?scid=KB; EN-US; Q823306 #appliesto
Maybe you are looking for
-
Not all my iPhone 6 photos when connected to iTunes/iPhoto.
Very well done on my Photos app on my iPhone 6 under my default 'All the Photos' folder I have 343 Photos. When I connect to my Mac Air via a cable lighting iTunes opens automatically, but says only I have 67 photos to download. My question is where
-
Satellite A500/026: problems in streaming/watch online videos
Hello I didn't know where to ask for help, so I thought start id here since I just bought my Toshiba A500/026 basically im having problem watching/streaming videos online. regardless of the source of the video, youtube, megavideo, veoh. the problem i
-
ThinkPad Yoga, can not change the settings in the BIOS after upgrade
Hi guys,. I just flashed BIOS on my thinkpad yoga 20CD00B1US. I got the lates BIOS 1.18/1.09 and sice this flash, I can't make changes in BIOS. I may list in the BIOS but can't highlite and change any setting expect fast start enabled My Manager the
-
On the desktop Media Center has stopped working Windows 7
Media Center has stopped working need a fix?
-
"BOLD" Nuked blackBerry Smartphones or hardware problem?
Hello Suddenly, "BOLD" my friend stop working after he stop flight. When it is restarted, the light flashes for 30 seconds then after that the display shows only the Big battery logo and completely off (no LED activity). I tried to revive with the ch