new hard drive cover

Similar Questions

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.

• How to install the new hard drive on PowerMac G5

  How it installs a new hard drive on PowerMac G5?

  I have a number of readers of the previous Mac that can fit in this PowerMac G5, but I don't know what - if anything - is necessary to make them fit. Or guides, assistance would be appreciated.  Thank you!

  You need a 3.5-inch SATA drive. Concerning how to swap the drives you can use these instructions to fixit. You can skip step 4 that this plastic cover does not need to be removed. https://www.iFixit.com/Guide/Power+Mac+G5+hard+drive+replacement/1952

• HP Pavilion 15 t-n200 CTO: new hard drive Help

  Hello

  Laptop was not start at all or take 15 + minutes to start.  I did a full reset by removing the battery and was still stuck on the Hp logo.  Conducted quick system check.  All passes except Hard Drive short DST check: failed.  Failure ID: GGFFTX-7407SB-MFPV6J-60V103 product ID: F6G93AV

  Date of purchase was 08/05/2014 so out of warranty & cannot get help from support.

  I guess I need to replace the hard drive?  Is this correct? I need not recover files or data of the machine, so from own is fine.  I want to upgrade to windows 10 once I get it - the initialization of the disorder began when I tried to upgrade, then machine evolves to 8.1.

  How can I find the specifications to order a new hard drive to make sure that I get the right thing?  Currently the car is ATA & 500 GB. Machine has Intel Core i5-4200U CPU @ 1.60 GHz Machine is not a touch screen.

  Of course, I'd appreciate any help someone could pay before ordering something.  Thank you!

  Here is the Service Manual:

  Manual

  See p. 59 for hard drive replacement. Unfortunately, yours requires a bit of work to get on the hard drive, involving a removal of the top cover, but not the motherboard.

  You definitely need a new hard drive and the system will accept any 7 or 9.5 mm thickness 2.5-inch wide SATA hard drive or disk solid state drive.

  I'll assume that you are located in the United States, unless post you back and let me know if not.

  I settle down to less than a mechanical drive of 7200 RPM like this:

  http://www.Amazon.com/black-750GB-performance-mobile-drive/DP/B00DSUTX3O/ref=sr_1_2?ie=UTF8&QID=1448743986&SR=8-2&keywords=7200+RPM+laptop+hard+drive

  You can also make a hybrid that has a bit of the State solid and also tops mechanical like this:

  http://www.Amazon.com/Seagate-laptop-2-5-inch-internal-ST1000LM014/DP/B00B99JUBQ/ref=sr_1_3?ie=UTF8&QID=1448743986&SR=8-3&keywords=7200+RPM+laptop+hard+drive

  The best and fastest are a SSD drive like this:

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E500B-am/DP/B00OBRE5UE/ref=sr_1_2?s=PC&ie=UTF8&QID=1448744072&SR=1-2&keywords=Samsung+850+Evo

  Sometimes, a video is the best way to learn and see which would involve:

  https://www.YouTube.com/watch?v=rm0m77Cm_Zk

  Post back if you need help more with transfer/relocation of software.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP G70-460US. new hard drive. How to create a partition recorvery and fill?

  I have a laptop HPG70 with Windows Vista 64 Bit OS, which has had problems with disks-errors.  I used Clickfree backup completely my computer every week, so I decided to buy a NEW hard drive and recreate the image on my computer on the new drive.   I was surprised to find that the instuction to boot from USB attached CLICKFREE device would NOT work on HP laptops!   I had to reinstall the old drive, join the CLICKFREE webside and create a Bootable CD with the software easyfix to completely recreate the image on my computer.   After the re-installation of the new drive and about 2 hours, the drive of my computer has been completely restored... Hooray!

  I was reading the docs from HP on the creation of a DVD cover, just in case catastrophic anothor disk HARD crash, so I decided to create a set of recovery discs as directed by the video...  I had never created these because when I bought my computer, I don't have any DVD to create.

  I watched 'MY COMPUTER' and I saw that there is a recovery partition (D: on 12 concerts) and open and it just says HP, so I decided to go ahead.

  When I started the recovery disc creation program, it gave me the error message that it wasn't any how restore partition and wouldn't create any DVD.  I don't have a DVD in the drive, when I started to deal with because I thought he'd JUMP full disc when it started, but never that which until now...

  How can I start creating the recovery discs when the recovery disc creation program says there is nothing there?

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Given that I do not work for HP and I do not use "Clickfree", I won't be able to figure this out for yourself, or a company. What I can tell you is that when installing a new operating system, an upgrade, or an imaging / backups, pointers on the recovery Partition are lost. By following the steps that I have to offer, most people are able to recover his computer to a factory condition.

  The way I would try it, is to make sure that you have a fully functional backup of your operating system partition and all data. Then I would try a recovery using the "HP Recovery Manager'... then 'F11'... and finally, marking the"HP Recovery patition"as active. One of these methods must recover the computer. Once restored, you should be able to create a set of HP recovery disks.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• install the new hard drive on the dv7

  So I'm about to install a new hard drive in my dv7, but remove the battery cover, then said drag training with tap pull on the reader, but does not move any direction. I have never replaced a front disc on my laptop and do not want to damage anything. But what am I I miss it please help.

  Thank you

  Ken

  Kenny sent me a personal massage with his problem on how to remove the hard drive, so it was my response to him. Finally the problem was the tab which had to be pulled to remove the drive was hidden below, there was nothing to shoot. For someone who never removed a hard disk, this would not be an obvious thing to understand.

  There are a whole bunch of pictures that I sent to him I thought to be very useful here. The photos are of a dv8.

  It should be just sitting there. You have a digital camera. If you do I will help you with the steps to upload a few photos so I can see what is happening. What is your new model number. You can also use a small screwdriver to lift gently over the blue of Assembly seats.

  

• My MacBook Pro was built in mid-2009, I understand that I won't be able to get the next Sierra of OS.  I just put a new hard drive 700 GB, more I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars. What I need to by

  My MacBook Pro was built in mid-2009, a 2.6 GHz, 13-inch, I just put a new hard drive 700 GB and I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars.

  I understand that I won't be able to get the next Sierra of OS. I need to by a new Mac?

  Talk to the people the more I would get if I turn in I'd get is about are about $ 100 million.  Please tell me it isn't so.

  If you want Siera you will need a new Mac, but you can continue to use the old one as long as you want.

• Cannot copy old backup on new hard drive

  I can't copy my old backup to a new hard drive directory by dragging the old new th diving in such Finder recommended by Apple.  There seems to be some controversy about how to accomplish this task.  Instructions would be appreciated.

  Did you follow the following steps:

  https://support.Apple.com/en-GB/HT202380

  to the letter? If so, what was the error message?

  C.

• new hard drive, how to reinstall OS x

  I have a new hard drive after a crash of the former. How can I install OSX top?

  You should be able to boot the Mac using recovery Internet if you updated the firmware to enable.

  OS X: on OS X Recovery - Apple Support

  If you don't have to update the Firmware to allow it to use the Internet in recovery, you need to use the installation provided with the Mac DVD.

  Either way, you start the Mac.

  Open disk utility and format the drive under OS X Extended journaled.

  Then, quit disk utility and reinstall OS X.

  Who will install the operating system on the Mac (likely Lion).

  You can then improve it to El Capitan.

  If you have a Time Machine backup, you can restore it in recovery from the Internet instead of reinstalling the operating system.

• Old favourites (nqa1hp6f.default) registered. New hard drive, new FFox 06/08/13 to W - 7. New bookmarks (?) (qlqx1k82.default). how to load the old b-brands?

  My question is similar to the previous, BUT I don't HAVE my old file of saved bookmarks (nqa1hp6f.default). My old hard drive crashed and now have the new Firefox on new hard drive with Windows 7. New firefox bookmark name (August 6, 2013) seems to be (qlqx1k82.default), but not sure. Is there an easy way to put all of my old favourites in new file of firefox?

  See also:

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• New hard drive backup restore

  I installed a new hard drive after backing up my old one (Snow Leopard) on Time Machine. I can't understand how to restore the backup to the new hard drive.

  First install the OS on the new drive.

  During the installation process (or just after, I forget exactly), it will offer you the possibility to configure the machine based on a Time Machine backup. Point it at your TM drive and come back in the morning (it will take a long time).

• I changed the hard drive, how do I put on an operating system on the new hard drive

  I changed the hard drive, how do I put on an operating system on the new hard drive

  Restart with the keys Option and command R keys. If this keyboard shortcut does nothing on your Mac, use a compatible Mac OS X installation DVD.

  Follow the prompts on the screen.

  (142198)

• Copy a project and media for the new hard drive

  Greetings,

  I have a very large project stored on an external hard drive and would like to copy the whole thing, including the original media linked to a new hard drive... because I'm afraid that my old one may cease to operate quickly. How can I go on the copy of my project to a new hard disc as well that all sounds, music and video are related?

  Thanks for your help.

  Hello.

  You can create a library of transfer in the user interface and move the top project. (It it will copy as you move it to a new drive)

  If you also move the media, it will break the links between the project and the media (audio and video). When you do that, use the command create a link (on the file menu). If you point to the good volume, it should find the media and offer you the ability to link again.

  Good luck.

  Russ

• HARD drive failure. You want to transfer the passwords to new HARD drive. If it is located. I don't remember the last time.

  HARD drive wasn't in my other computer. Put in a new HARD drive and transferred the bookmarks (FFox. (++ 16 on both), but do not remember how to transfer my saved passwords. Some people have helped me with this when I rebuilt this PC (the one that I use to send this info) and I remember most of the way and the method, but not well enough to attempt it without some guidance.
  The other PC is a laptop ASUS G50VT - X 5.

  XP:

  • C:\Documents and Settings\ < user > < profile > \Application Data\Mozilla\Firefox\Profiles\.

  Vista/Windows 7:

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.

  Windows: %AppData%\Mozilla\Firefox\Profiles\ < profile >.

  The "Application Data" in XP/Win2K folder and the folder "AppData" in Windows Vista and later versions of Windows 7 + are hidden folders.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  For passwords, you must the signons.sqlite and signons3.txt file.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".