new hard drive, Wireless does not

Similar Questions

• R50E installed new hard drive, laptop does not see...

  Hello

  Just installed a new hard drive, one old man went beyond repair, the disc is out of the package, I format, partition, but the laptop does not see...

  I wonder how I can do... I do not have the recovery disks, but I can get them if it will solve the problem

  Thks

  Thks for yr reply

  But the problem is solved, it was a hard drive defective, even if she was new out of the package, returned to the shop, tested found inoperative, replaced by another that everyone ok

  concerning

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A clean install of Vista Home on new hard drive SATA does not end

  MAJOR problems, do a clean install of Windows Vista Home Premium 32 bit on a SATA hard drive. It takes 2 days for installation and at the end he hangs and won't start not even once again. Help!

  * original title - the IMPORTANT issues having a clean installation of Windows Vista Home Premium 32 bit on a hard dur.* of SATA

  Hi Zombie_206,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Vista-install-problems/d3e9d959-db3e-44e9-8543-b730d7cf4399

  I hope this helps!

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Inspiron N5010 windows 7 64 bit driver driver Wireless does not

  Inspiron 15 Intel (N5010)

  After buying a new hard drive for my laptop and reload windows 7 home premium 64-bit, I started to download the proper drivers, most of them seems to work, except for my wireless adapter which does not pick up.

  I tried the site of dell support for drivers on this list don't seem to work either, I finished downloading the drivers as I can, as I do not know the brand of my card and my knowledge of the material is very limited.

  Please please help with the right drivers for my problem thank you very much.

  pharoah165b,

  When you reinstalled the operating system, have you installed the desktop system software / laptop (as appropriate) and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Start with the computer system software and the chipset drivers and follow the list.

  Rick

• 3000 C100 cloned Hard Drive Upgrade does not start

  Hello

  I recently bought a western digital hard drive 320 MB to replace my hard drive C100, which is now complete.

  I cloned the old hard drive and when I installed the laptop doesn't start, he just said "no bootable CD in the drive. It does not seem to 'see' my new hard drive, when I pressed the button lenovo tools and then used F12 to choose my boot option, the laptop just a black screen.

  Any ideas?

  Derek

  What software did you use to clone?

  WD now provides an OEM to Acronis version on their website

  that I used and it worked.

• New hard drive, see is not in the Bios F23, hp g42 281la

  My old hard drive has stopped working (couldn't even restore). I bought a new hard drive (the same) and bios F23 is not see it.

  Please help solve the problem.

  Thank you.

  Hi Ivan_Vasilyev,

  I understand that you are having problems with the BIOS on your laptop HP G42-281LA. Here's a download for the F.27 BIOS updated (which is the most recent) Version.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93590-1&cc=us&DLC=en&LC=en&OS=4063&product=4311607&sw_lang=

  I hope this helps.

  Thank you.

• Installed the new hard drive - now "OS not found"

  Hi, I recently installed a new hard drive in my laptop because the old hard drive was dead. So, I installed the hard drive and I am now installing the operating system using the Dell disk I received with my laptop. This is for the 32-bit window Vista and it says it should be used for re-installation of Vista. It was in a sealed envelope - so it has never been used.

  When I start the laptop and insert the disc, it just says: operating system not found.  I made sure the cd drive is the first in the startup list.  I also put the drive into another laptop and copied the files on a USB key.  Then tried to install it on the USB. No luck.

  I have run the system diagnostics, and it says that my hard drive and cd drive are recognized and functioning.

  The dell cd drive is not bootable?  Thanks in advance for your help.

  I was able to fix this on my own. It turns out that one of the files has been altered I discovered once I was finally able to get it to boot from a USB device.  I found the one window Vista installation disk other that I have with another computer laptop and used that. Worked well.

• installed the new hard drive, but could not find the original CD.

  I have a hp w6243p desktop computer.  I installed a new hard drive but cannot find my original driver cd so I ordered one online, I have nothing on my computer, please help

  Hello

  Driver for what?

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows Vista install the new WD hard drive empty - does not not :(

  It was my original question: http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-Pavillion-a6645f-No-hard-drive-detected-BIOHD-2-err...

  And now...

  I got my CD of HP recovery and ordered a new WD 500 GB HDD... same features as the seagate who pooped me and I can't get windows install on the new HD

  No matter what I do, computer wants to open the Recovery Manager and according to the available procedure does not work.  It works me in circles asking for #1 drive, then the drive recovery supplement and back with no progress.

  What I have to do is use this form: http://vistahomepremium.windowsreinstall.com/installnewhdd/installnewhdd.htm but only the Recovery manager opens when I boot from the CD.

  Anyone have any ideas?

  If I followed your questions correctly... you had a BIOHD-2 error, ordered HP recovery discs, replaced the hard drive and tried to restore your system with no luck. Is that a correct assessment of the situation?

  OK, you need to make a Windows Vista install screen... not who's going to go with your HP recovery CD/DVD. The disks do not contain the Windows installation routine, only the HP Recovery Manager. These discs contain more or less, an image of the HP installed OS and software, plus some drivers and applications. To the best of my knowledge, you should have three DVDs (1 of 3, 2 of 3 and 3/3) more an additional drive. You should boot from CD 1 of 3... Then, when asked to insert the 2/3... Then, when asked to insert 3/3. And finally if/when necessary additional drive.

  At HP; Recover the system after the hard drive is replaced (Windows Vista)

  Frank

• I have old records of CS5, but my new mac book doesn't have a hard drive and does not know how to download from adobe. they give several choices of cs5, but I don't know which one to choose. Even if I do not choose one, should not me to a bushel of downlo

  I have a disc of CS5, but impossible to find on which is mine in the long list of choices. When I click on one, it does not attend a place to enter

  Serial No. or a download button

  Ohrita you can download the Setup for Creative Suite 5 CS5 downloadfiles produced.  You can check the license of the software that was purchased by checking your account on http://www.adobe.com/.  You will find more details in your serial number to find fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

• Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

  My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

  Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

  If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

  The drive may have failed.

  Try different USB cables.

  Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

  Ciao.

• Satellite L670 - the system HARD drive recovery does not start

  Hello together,

  I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

  When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

  Can you help fix the problem.

  Thank you and best regards,
  Dinder

  Hello

  This does not work because you have installed Win 7 64 bit as you said here:
  > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
  Try this

  Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
  That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

  What to tell buddy you need recovery disks. I guess that you have a European model for laptop

  You can order the recovery discs here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite A660 - protection of HARD drive utility does not enable protection

  Hello

  I have a Toshiba Satellite A660 1F6, unfortunately the usefulness of Toshiba HDD protection does not enable protection because all the buttons are gray, and when I try to open it, a message appears: "He was not able to set up properly for the Service of HARD drive Protection System."

  I tried uninstalling and reinstalling, but the situation does not change.

  Thank you.

  Are you using the original operating system preinstalled that you got with your laptop?