New HP Elitedesk 800 G1 - no wireless adapter?

Similar Questions

• New 5 Ghz PCI wireless adapter for dv9438ca?

  My new 5 GHz router creates a mismatch... can I buy a new 5 GHz Mini PCI wireless adapter for the following PC...?

  HP Pavilion dv 9000 CTO Entertainment notebook computer PC

  Model # dv9438ca

  Prod. # GL887UA #ABL

  [Personal information]

  It was delivered with... Part # 441090-001... Wireless 802. 11 b / g mini PCI card (Broadcom, Hoya) adapter - data rate of 54 Mbps, 2.4 GHz of bandwidth of operation...

  I want to install any compatible which will allow me to access 802. 11A or 802.11n at 5 GHz

  Please & Thanx

  Beauvaidos

  [Personal information]

  Maintenance and Service of Guide available on this link, I don't see a N Wireless internal that is compatible with the BIOS on this laptop... You will need to get a USB external, if you need to connect to Wireless N

• New wireless adapter does not connect to my router

  at home, I have a wireless router WRT120N set up for wireless internet connections, I also use the wireless adapter that comes with it. I recently bought a new adapter wireless like this: http://global.level1.com/product_d.php?id=891 and it connect to the router? Help, please

  I think that the wireless connection on your router may not work properly.

  Create a new wireless network.

  Connect the computer to the router with the Ethernet cable. Open the router setup page and go to the Wireless tab, change the name of the SSID wireless network to create a new wireless network. Change the channel to 11. Save the settings.

  Go to the tab of sup of wireless security and check the security settings. Make sure you have the key/password network correct.

  Go to the sub-tab to Wireless MAC filter and make sure that it is disabled.

  Go into the settings wireless Advanced tab change the interval of tag to 75, RTS and Fragmentation threshold to 2304. Save the settings.

  Now ty to connect to the new wireless network.

  If this does not work then try upgrading/re-Flash the firmware on your router.

  Connect the computer to the router with the Ethernet cable.

  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page and update the firmware on your router. After upgrading the firmware of your router, reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• I have recently reinstalled Windows 7 and now I have no option for wireless connection and wireless adapter is not (wireless connections do not show up when I go to set the new connection)

  I recently installed Windows 7 on my PC, and now when I try to set up a new wireless connection, it's impossible. My plug-and-play wireless adapter is not recognized by the computer (but he did more earlier today before installing Windows 7). NETGEAR has the appeal of Microsoft, Microsoft refused to help me for less than 80 bucks, which I can't afford, after buying their product of GD.

  So I was wondering if someone can help me? On my laptop when I go to the networks and together a new network, there is an option to set up a WIRELESS CONNECTION. Can someone help me please? I can't afford $ 80 to tell what drivers to download.

  Thanks and + karma to one who can help me solve this problem.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• Elitedesk 800 G2: Elitedesk 800 G2 - auto standby unwanted on with network boot

  Hi all

  I have a problem with my new Elitedesk 800 G2, which I think is related to Wake on Lan. The problem is that I can't find these settings in the BIOS settings. If I'm just blind?

  Description:

  Off my PC it remains off for a few minutes. Then, it feeds on and try to network boot. Since I have nothing to start from my home network the attempt fails. After that, it tries to boot from hard drive but also fails because it cannot find a harddrive (?).

  Then I have to power cycle the computer to boot normally from the hard disk.

  Once it's on, it works perfectly.

  I tried upgrading the BIOS yesterday but the problem remains.

  Hello!

  We have solved this problem.

  With 2.15 BIOS and Windows installed 10 (we have more old bios/OS installed on this device), enter BIOS-> advanced-> Startup Options-> search

  Legacy-> option to disable boot order

  

• On Satellite 5200 wireless adapter

  I have a toshiba satellite s5200 701 has he got a wireless adapter

  Hello

  Stefan is right. Your device must be ready WLAN. I found the news than Toshiba 802. 11b Wireless LAN Mini PCI Card (PA3212U-2MPC) is compatible with your device.

• EliteDesk 800 35W G2: G2 EliteDesk 800 35W network driver problem

  Hello

  We have a new EliteDesk 800 35W G2 phone in our office.

  In order to obtain compatible drivers, that I'm wrong.

  The one you suggest the latest network drivers for "G2 HP EliteDesk 800 35W.

  Network driver: Intel (r) Ethernet connection (2) I219-LM

  Pls share me the source for Windows 7 x 64.

  Thanks in advance!

  Pen

  Amala

  Was having the same problem for weeks. Finally found a driver that works with the boot image (6.3.9600) - found on the Lenovo site but works on HP EliteDesk 800 G2. Used download Win7/8.1. No other driver seems to work - get the blank screen because you do not have a work CARD driver (press F8 for CMD and run IPCONFIG).

  http://support.Lenovo.com/us/en/downloads/ds105362

  The driver version is 12.13.17.6

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!

• Not able to install the wireless adapter built on Tecra 8200

  Hi all

  I have a Tecra 8200

  After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

  I cannot install the drivers for the card of m.

  XP is SP2
  BIOS is 1.60

  Could someone help me what to do, thanks in advance.

  Brgds,

  Thomas

  Hello

  If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
  [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
  "IrqRouteToPciController" = dword:00000006

  I found a statement of installation:

  1. new installation of Windows XP Service Pack 2 package
  or clean install Windows XP Gold package and install Service Pack 2 update image on it.
  2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
  3. the following window will appear,
  "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
  Then select "Yes".
  xxxxx is the location of TICardBusIrqRouting.reg
  4. the next window will appear,
  "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
  Then click on 'OK '.
  xxxxx is the location of TICardBusIrqRouting.reg
  5 restart the system

  Good luck!
  Good bye

• Wireless adapter has disappeared on my Satellite C660-22V

  Hi, I am very well to this new and have knowledge on this SUBJECT.

  The situation is, my computer had a problem turning on and the opportunity to restore to a previous point in time, that I continued with. After the completion of this and that the computer opens completely, the wireless adapter is no longer meet!

  I tried to look in the network and sharing Center, there is no option for a wireless adapter, only one ethernet adapter unplugged.

  I also looked in the Device Manager and I cannot find any mention of the wireless adapter, I expected to be there with a yellow icon, that means a driver problem, but it is not there at all!

  The laptop is a Toshiba Satellite C660-22V

  Thank you!
  Tom

  > I also looked in the Device Manager and I cannot find any mention of the wireless adapter, I expected to be there with a yellow icon, that means a driver problem, but it is not there at all!

  What devices appear in Device Manager under the category network cards?
  Is any unknown device visible?

  To my knowledge, this Satellite C660-22V has been fitted with a 802.11(b/g/n) of Realtek RTL8188CE WLan card.

  For installation of the driver Realtek RTL8188CE WLan should help to make it work (of course, just in case a missing driver would be the problem)

  By the way: what system are you using?

• Satellite A660 - Broadcom internal wireless adapter does not work

  Hi all

  My first post to this forum - I have a new laptop of Toshiba Satellite A660 - only had for about 4 weeks and it turns out be a disaster for me...

  Firstly - I spend weeks getting everything on and configured as I want - then the hard drive begins to die...

  I just returned it service center Toshiba and NOW wifi has stopped working...
  Internal broadcom wireless adapter doesn't work - but according to windows and built-in Diagnostics it works...

  HOWEVER - when I try to use wireless with the built-in adapter may not detect all wireless networks...

  I then plug in my adapter netgear usb wireless backup and I can pick up and connect both of my wireless home networks...
  I am moving abroad in a few weeks and need to know that my laptop will work/be reliable and not have any problems-if anyone can help me with this, it would be much appreciated.

  John.

  Before starting the scan for available wireless networks you have activated WLAN card correctly?
  Orange is WHAT turned on WIFI?

• Elitedesk 800 g1 sff - cannot install windows 7 on SSD

  I have a new elitedesk g1 800 LTS.

  I would like to perform a new installation of Windows 7 Pro 64 bit on an SSD because I tried to clone but it BSOD.

  I try a new installation, its seen in the biso but when I boot from the cd it stops and can not find the HD during installation and I can't find the drivers to install to go further.

  Am I missing something?

  Win7 Pro 64 bit

  elitedesk 800 g1 sff

  BX100 crucial SSD 250 GB

  Any help much appriciated.

  Talked to HP and Crucial, the drive is not supported.

  Only supported discs are...

  Drive internal

  320 GB up to 2 TB SATA (7200 RPM)

  500 GB up to 1 TB SATA (10000 RPM)

  500 GB up to 1 TB SATA SSHD

  Up to 160 GB SATA SSD 128 GB

  256 GB SATA SED

  Limitation to say crucial HP for the reader is quite rare and replacement by the MX100 and MX200 discs like those are SEDs

• HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

  I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

  HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

  In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

  Below is a screenshot of what I mean.

  

  Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.
  
  The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.
  
  I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.