New in Premiere Pro. Why did I not Lumetri looks like?

Similar Questions

• My new HP Officejet Pro 8600 N911a does not allow a webscan

  My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

  Anyone has a suggestion to solve this?

  Hello tutoke

  The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

  1. Click settings
  2. Click the administrator settings
  3. Check Webscan
  4. Press on apply downstairs.

  Try to scan the image.

  

• I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Plays in the video source, but does not allow me to change on the time line with the. MXF files.

  I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?

  Neil, get it fixed, I do not have the video channels set correctly on the left

  side of the line of the time. Learn the new adobe; Thank you

  Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>

• Premiere Pro CC 2015 does not recognize my 4 AJA Kona card

  Hello world

  Premiere Pro CC 2015 does not recognize my 4 AJA Kona card.  Here are the specs:

  Computer:

  Mac Pro 2013 (trash)

  OS: 10.10.5

  Map:

  AJA Kona 3 G + 4 e/s

  Installed in mercure Helios via Thunderbolt

  I can capture in the AJA control room, the computer recognizes the card and my Mac Pro towers plays very well with the first CC 2015 + combo 4 Kona.

  What I did to solve problems:

  -Replace the mercure Helios with mercure Helios 2

  -Replace cable Thunderbolt

  -Ports exchanged

  -J' tried CC 2014

  -Restarted

  -Standing on one foot...

  Any help would be appreciated!

  Hi Vinay,

  What has ended up having to happen was 12.3 UN-installing, installation of 10.6.1, can upgrade to 12.3.  Just solved!  Thank you

  jZ

• When I text on my Mac, why did he not appear on my iPhone?

  When I text on my Mac, why did he not appear on my iPhone?

  Have you followed these steps to implement continuity?

  Set up SMS and MMS with continuity

  1. You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
  2. Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
  3. On your iPhone, go to settings > Messages > sending & reception. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and activate the device or devices that you want to transfer the messages.
  4. Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.

  Make sure that your email address is checked everywhere.

• Error opening of Premiere Pro - "the application could not start properly. (0xc0000142).

  Error opening of Premiere Pro - "the application could not start properly. (0xc0000142).

  Using 10 Windows on a laptop HP with an AMD A8 - 3520M. Already uninstalled and reinstalled does not.

  I me evaluate the trial version of this app. So far, I'm not too impressed.

  Re: First Pro 2015 won't open after the recent update

• Hello, I have a new Mac Book Pro and I'm not sure how to use it. I just 'downloaded' Lightroom and it is not showing in my toolbar or on my desk... It shows a circle that says Lightroom 5.7.1 and when I click it it brings me to the ini

  Hello, I have a new Mac Book Pro and I'm not sure how to use it. I just 'downloaded' Lightroom and it is not showing in my toolbar or on my desk... It shows a circle that says Lightroom 5.7.1 and when I click it it brings me to the download process initiail... Help!

  Hello

  Please click on the first " Finder " icon on the dock (toolbar below) on your screen, in the left panel, you will see an option, click on 'Applications' on it.

  Under the present, you should be able to see Lightroom if it is properly installed.

  

  Let us know if that helps.

  Kind regards

  Bani

• Premiere Pro CC 2015 does not recognize Sony MTS on Windows 7 files

  Premiere Pro CC 2015 does not recognize Sony's MTS files

  Edit the title by moderator

  Hi Curtis,.

  Please go to the Task Manager on your windows 7 prcesses tab (CTRL + SHIFT KEY + ESC), check the box that says "show all processes of users." Once close all Adobe found in the process tab processes.

  After that, please go to the documents folder and rename files like Old_Adobe Adobe

  Then click on the Start button and in search programs and files box, type %AppData%, this will take you to the roaming folder. In this, rename the Adobe folder as old_Adobe.

  Restart your machine. Launch of Premiere Pro > sign in then check the behavior.

  Vinay

• Premiere Pro 1.5 will not load

  Hello

  After a certain period of time "away" from the edition he thought time to get back in it.  However, my Premiere Pro 1.5 will not start on my computer.  (Normally), it gets to loading Wave_Warp AEX, stop, think about it for awhile, then the re-boot computer itself!  It works fine on my laptop and I tried on my desk of wives without any problem.  I tried everything I can think to stop this happening, including a full system restore with the disc format hard drive thinking HARD own would agree, but no, the same result.  I suspect there is a compatibility problem with this computer, which is a version of Win XP Media Hewlett Packard media machine running.  Any help or advice appreciated - I have spent a lot of time trying to get this to work and it's before I started to edit!

  PS I'm very much a 'home' user, and if don't want to go to load again upgrade, only to find that would have the same problem - I had an older version of the 'trial' of Pro 2.0, but that had the same result, the computer has re-boots during loading.

  Thank you very much

  MKN

  If specific to the front, this Article Adobe KB can be useful for you.

  Good luck and we hope this can help,

  Hunt

• Premiere Pro cc 2015 will not launch after putting in

  3 I just updated Premiere Pro cc 2015 via Creative Cloud on Dec 2015

  Then, when I tried to open it, I had this error message:

  The application failed to start properly (0x000001d).

  Reset did not help.

  I am running Windows 7. The Premiere Pro cc2015 worked fine on this machine, so I doubt that the problem due to the plug to my computer.

  Thanks in advance for your suggestions.

  Looks like it is caused by a problem with the AMD Phenom processor. Check out this thread:

  Premiere Pro 2015 won't open after the recent update

  Then go here and pulling back to the previous version:

  Install an earlier version of any creative cloud application

• Premiere Pro 2.0 will not install on windows 7

  I just installed windows 7 Pro and I am trying to install the Premiere Pro 2.0, but it seems that the cd player will not even read the disc. He tries for a while, then abandons, producing nothing. I managed to do work ONCE and everything seems to be going through all the normal setup procedures, including asking my serial number, I gave it. But at some point he has hung up, was told he could not install something and then stopped without any explanation. There is no trace of any part of this program on the computer at all. So, I'm puzzled as to why this is happening. Someone has an idea?

  Since you have Win7 Pro, see if this will help

  http://www.Microsoft.com/Windows/Virtual-PC/

  In addition, some further reading

  Win7 help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
  Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
  Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
  Optimization of http://www.blackviper.com/Windows_7/servicecfg.htm

• OfficeJet 4500 Mac OSX 10.6.4 reset printing system... Why did I not do it?

  I recently had someone whipping out my Photosmart old cable and not being not not a particularly brilliant rabbit I pressed "Reset printing system" and have been regret since then. OK, so the Photosmart, smarter than me, being refused to work. I have a Deskjet F2280 in the same office then rigged up to my Mac, and when it worked, I came to the conclusion that I must somehow induced a "software conflict", (love the sentence don't you make me see all sorts of internal battles going on in the bowels of the machine... but I digress), so did what would do any other not-so-bright Bunny and , deciding it was time I treated myself to a new printer, whipped at my local store - not so local, in fact, 60 miles away - and bought myself a new brilliant Officejet 4500 G510g-m. Well, he asked know? Same problem - does not work. Says that there is an error in the print queue, but is not much more useful than that.

  Okay, so I get my wonderful Mac-mate who knows everything about Macs and computers in general etc and he said, 'Remove the p-lists' if that's what I did. the same problem.

  Then, he says, "repair disk permissions"; If that's what I did. Same problem

  Then, he says, "Re-install the software"; If that's what I did. The same problem.

  In fact I did all these steps about four times over the next five days, but constantly face the same bloody sentence in the print queue. It is said he sends print data to the printer but does not ever happening, and finally he gave up and place comes 'Mistake' again.

  Now, this friend of mine knows EVERYTHING, so when I called him then, and he said, ' ol chap ' Frank sorry, you're on your own ", well, I can take a hint as much as the next chap...

  Now, anyone out there have a go at getting the damn thing going?

  Yes, quite slow.

  It is strange that he did this on USB.  I assume that you do not use a USB hub and it is directly plug it into your Mac?  Have you used a known good compatible USB 2.0 cable?

• I have Adobe Acrobat 9 Pro - why can I not use my link to advanced editing tool?

  I have Adobe Acrobat 9 Pro.  When I opened my Advanced/Advanced editing the only option is 'Show Advanced édition Toolbar'.  Why none of my tools are operational?

  This happens for all the PDF files? Looks like you are working with a secure PDF that does not allow editing, or possibly a PDF/A file.

• Premiere Pro cc plays do not in the timeline

  I just started on Premiere pro CC and that is what makes no sence I

  I have an iMac and my movies are on a USB hard drive

  I import some little clip and the film now is about 3 minutes.

  (1) when the helmet is pluged - I can hear sound... Sometimes, when I disconnect the headphones I can both see and hear the movie. Sometimes I can't see the film and hear it.

  (2) sometimes the film would not begin to play when I hit the SPACEBAR on the keyboard.

  Can someone help me out here? Is this a bug. This fact happened when I used Premiere Pro cs6.

  Apply the update that was released today. It includes improvements in the interaction of Premiere Pro with audio drivers on Mac, this might solve the kinds of questions that you are a statement.

• New on Premiere Pro CS4, seeking help

  Hi people,

  I'm working on a small project using images, just still no video in Premiere Pro CS4 on a windows machine. The final product will have to play on a TV 46 '' smart (basically, it's the digital display for a trade show booth). I hope there, can someone give me the best settings to use to set up my file and export. As I said, I am completely new to the first, so any help at all will be greatly appreciated.

  Thank you!

  Export as mp4. There are many presets and you can find them under H.264.

  720 p will be the case most of the time. You can also try 1080 p.

  If you want to .wmv try the HDwmv.