New memory space

Similar Questions

• I bought the extra memory. What I have to do something when I install the new memory? __I went to Disk Defragmenter and it always says that I have 35% of free space. The new memory will change this amount? Or is it important?

  I bought the extra memory.  I have to do something when I install the new memory?
  I went to the Disk Defragmenter, and he always says that I have 35% of free space.  The new memory will change this amount?  Or is it important?

  Monday, December 20, 2010 18:53:59 + 0000, Magallón wrote:
   
  > I bought extra memory.  I have to do something when I install the new memory?
   
   
  Generally no.
   
  How many memory currently have installed? How did you buy?
  Did you buy exactly the same type, brand, model, etc. ?
   
  Why do you want more memory? Depending on how much you have now, and
  What applications you are running, it may or may not do anything for you. More memory
  is this not better for everyone. This is my standard message on this
  Object:
   
  The amount of RAM you need to good performance is * not * a
  unique situation for all. You get good performance if the amount of
  RAM you have prevents you from using the file page in a meaningful way, and
  It depends on what applications you are running. Most of the people a typical range running
  Enterprise XP applications find that somewhere around 512 MB
  works well, others need more. Almost everyone will see poor performance
  with less than 256 MB. Some people, especially those who do things
  as modification of large photographic images, can see an improvement in performance by
  adding even more 512 MB - sometimes much more.
   
  If you currently use the page file significantly, more memory
  will reduce or eliminate the use and improve your performance.
  If you do not use the pagefile significantly, it will make more memory
  nothing for you. Reach
  http://billsway.com/notes%5Fpublic/WinXP%5Ftweaks/ and download
  WinXP - 2K_Pagefile.zip and monitor your use of the page file. Who should
  give you a good idea of more memory can help and if so, how
  lots more.
   
   
   
  > I went to Disk Defragmenter, and he always says that I have 35% of free space.  The new memory will change this amount?  Or is it important?
   
   
  You have 35% of your hard drive free. It's disk space, also called
  storage. It is not memory, what is RAM. Adding memory will not make
  any changes to the available disk space.
   
   

  Ken Blake (MS-MVP)

• Satellite Pro P300-19 q - cannot start with a new memory

  So, I want to add 2 GB of RAM to 2 GB existing. I use Windows 7 64-bit. In the BIOS, I see 4 GB of memory, but windows won't start.

  When removing the old memory and leaving the new, the computer isn't even strats. Some info:
  Old memory - Samsung M4 70T5663QZ3-CF7 2 GB DDR2 - 800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
  New memory - Spectek DDR2 2 GB PC6400 800 MHz 200 pin

  So, what's the problem? And what can I do?
  Thank you

  Hello

  Theoretically, it should be possible to use 4 GB in this notebook.

  The new RAM is the manufacturing of Spectek. This production does not for me. For me, looks not dear noname module.

  I always use Kingston modules to upgrade my laptop. I've never had any problems with these modules, so you should try it to.
  I think that the new module isn't compatible with your laptop.

• Can I change the new memory and at the same time to replace the Rams?

  Can I change the new memory and at the same time to replace the Rams?

  If a MacBook Pro RAM and drvie hard can be modified/improved depends on the submodel and we do not know yours. There are dozens of variations of the MacBook Pro issued since 2006, and you do not want guessing us!

  Please do "about this Mac" in your Apple menu to get this:

  

  Notice the line that I have highlighted with the red arrow. Please tell us what your computer has in the thr same place. However, do not post any serial number.

  With the exact submodel we can better advise you of any available upgrade paths.

• What can I do to make the Satellite A665-S6086 run with the new memory?

  I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total).

  My question now is when I start my computer with the new RAM/memory (two cards that are KTT-S3BS / 4G Kingston DDR3 1333 MHZ SODIMM SGL RANK), it freezes on the screen from Windows startup. Then when I hold the power button to shut it down and restart it, it wants to start using Windows repair but then crashes again. When I put in the memory of the old man and he start up, it starts the Windows repair and runs normally.

  What can I do to make my computer run with the new memory?

  I thank very you much in advance!

  What you can do?
  Buy an another RAM modules that are fully compatible with the laptop.
  It seems that you want to use the RAM modules which are not totally compatible and therefore the system hangs.

  By the way: the CPU that is used in this notebook runs the DDR3-800 and DDR3-1066
  RAM modules.
  http://Ark.Intel.com/products/49020

  I would not recommend to use the modules of DDR3-1333 but PA3677U-1M4G 4 GB DDR3-1066

• Satellite 1800-100 won't start with new memory

  My satellite s1800-100 won't start although my new memory (2nd) module is 128 MB PC100.

  I have Samsung samsung K4S281632C-TC1H module as PC100 (128 MB) memory on SLOT 1 by default.

  Although all of the features and form factors are clean, why not my Satellite S1800-100 starts? I checked the new (slot 2) memory works fine and tested OK.

  So, is there as a possibility to have a problem in the 2 Slot? Or is associated with failure of the BIOS? (there is no more recent BIOS, current is 2.20 for Satellite S1800-100).

  I am disappointed. I bought a new 128 MB PC100, to insert it in the slot 2, my Toshiba didn't boou up!.

  Important note: if I connect the new memory I bought yesterday, works very well in Slot 1.

  Please help and understanding.

  Kind regards...

  Hello

  Well, it very difficult to say why it won't start.
  I think that there are several possibilities:

  (1.) you used a bad module
  (2.) the second Bank of the Board of Directors has a malfunction
  (3.) the laptop does not support max 256 MB of RAM

  I think that point 1 and 3 is not relevant because you have tested the module and it worked on the first location. Additional the laptop should be able to handle 2 x 256 MB memory, so you should be able to use 2 x 128 MB

  I think that the second ram location may have a malfunction.
  Please check the second slot with a module of memory.

  The second possibility is to use exactly the module which is recommended by Toshiba.
  As I remember it s PC100 128 MB (PA3005U) SDRAM

• Satellite P30 - 110 and new memory

  I just bought a 1 GB memory module to fit into my laptop, but when I put and start the laptop to a blue screen appears and tells me there is a problem with one of the graphics card drivers and then the computer restarts continually.
  I updated the BIOS and the ' display readers on the Toshiba site and changed the virtual memory settings, then tried again and now it is continually restarts as before or will start as normal and open windows but will be very, very slow and not all the graphics will be displayed on the screen, (for example the text saying 'start' in the task bar is not there some parts of windows are blacked out) (, and the boxes around these buttons under the name 'ok' and ' Cancel do not appear.)

  I've tried everything I can think of and nothing works well if I remove the new memory and just leave the old 512 MB module in weather. I checked the memory and it is of the correct type, there is someone out there who has experienced similar problems or who knows how to fix this, please?

  Hello

  If you are 100% sure that this new module memory is responsible for your problems I recommend ordering a new module of RAM from Toshiba or Kingston. The module are tested and they should work fine.

  Compatible modules for your unit are:
  512 MB (PA3312U - 1 M 51)
  1024 MB (PA3313U-1M1G)

  Good bye

• I want to know how to remove the back cover of my HP Pavilion Sleekbook 15 to install the new memory?

  I want to know how to remove the back cover of my HP product name: HP Pavilion Sleekbook 15 to install the new memory?  All site shows HP Web is how remove caches memory.  Unfortunately, with the newer models like mine, the whole back cover needs to be removed.  I have tried in vain to remove it, but so far all that I managed to do is scratch my cover.  If anyone can help?

  Dear David

  It's a very good idea, it would also be a good excuse to use my new phone for this.  So I'll say thanks again for the good advice.  Have a great weekend you Mr.  As I said earlier, you're a star...

  Yours Sincerely

  Alan

• laptop does not recognize new memory RAM

  Hello

  I have the Aspire E1-572-74504G50Mnkk i7-4500U with 8.1 64-bit windows. I just bought a 4 gb Kingston Valuaram, when I insterted it in my notebook, in Panel I can't see the new memory. However, I see 8192 mb with the PCwizard program. He was already a 4 GB card. Hope you can help out me.

  Yes, may only recognize it, but if the BIOS cannot also Windows cannot.

• New memory card blackBerry Smartphones

  Do I have to format a new memory card for blackberry?

  It is recommended to format the card support before using it

• BlackBerry Smartphones how can I compress pictures by roxio or other software to save memory space?

  My photos are usually 4MB. I am currently compress every photo less than 100 KB before copying to save memory space on my "BOLD", but it is laborious. I hoped that roxio would do this for me, but it seems fair to copy like-for-like. Is there a function in roxio or any other software that will accelerate this process for me?

  I have recently updated from Pearl to "BOLD", and I'm in love. I followed messages on this site and solved 90% of the minor issues, I had, so thank you for all the help a lot.

  You can use a program like Photoshop, Gimp to do. Most graphics programs come with some sort of compression software.

  You transfer on the device memory or a media card? If they are on a media card, them they don't are not recorded in the memory of the device and you wouldn't have to worry about their compression

• How to create a new color space in photoshop

  Hello

  I am trying to create a new color space in photoshop. I have RGB and whitepoint and gamma I want to use.

  I was informed that "..." you can create a new color space in Photoshop and save it to an ICC profile... »

  Ok. I spent 30 minutes trying to Google the answer without success.

  How?

  Try this (kind of old, but seems not changed) create the custom RGB profile

  Here are the rgb in 2015 CC custom dialog box

  

• The Pro Adobe bought, downloaded the file (with 1, 67MB) on laptop with OS Win8. When you try to install (my memory C: 2.39 GB free) the file, Adobe dialog says "the computer memory space is not enough. This is ridiculous. What can I do?

  The Pro Adobe bought, downloaded the file (with 1, 67MB) on laptop with OS Win8. When you try to install (my memory C: 2.39 GB free) the file, Adobe dialog says "the computer memory space is not enough. This is ridiculous. What can I do?

  Just click on the link acrobat XI and download download Acrobat pro products, acrobat XI | Standard, Pro | XI, X

• Mobile tables to new storage spaces

  Hello
  
  If the database is to climb up or down by moving the tables to new storage spaces in EBS

  Salvation;

  Please see:
  Note: 147356.1 - how to pass arrays of one Tablespace to another
  Note: 158162.1 - how to move all the Tables a user to a different Tablespace
  Note: 151588.1 - how to reorganize a table

  See also:
  Re: How to move a table to the other schema

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• TS200 hangs with the new memory

  Hello

  I have a new TS200 (A 6522, 11) which came with a 1 GB UDIMM (and the system boots fine with that).

  I just tried to replace that memory with a 4 GB RDIMMS with the following specifications:

  Kingston KVR1333D3D4R9S / 4G

  4 GB PC3 - 10600 CL9 REG parity

  When I start the system with just this memory installed, I get the following:

  Initialization of the IMM
  IMM initialized memory
  Loading the kernel IMM
  Operation of the IMM kernel
  (delay)
  BNC has begun
  (delay)
  Network initialized
  Remote Power Control available
  Thermal management online
  Flash Manager ready
  Online video remote engine
  Ready IPMI sensor scan
  Available VPD
  SALT initialized
  Ready for the initialization of the uEFI
  uEFI boot
  (delay)
  Initialization of system - do not turn the system off
  (cleared screen)
  uEFI boot

  Then a few seconds later Amber '! ' symbol on the front panel lights up the server.

  Thoughts or comments appreciated.

  Ian was soon