New model 6700 printer, Windows 7, running wireless, "standby mode"

Printer 15 minutes "sleep mode". (hold that it was not a sleep mode option). When you try to print once he's asleep, an error screen appears indicating that the wireless printer is not connected.  After waiting, the printer, sometimes turns on and prints.  Other times I have to go in printing to cancel the print job and try again.  Coming out of sleep mode lasts too long.

Hi, do you have the IP address of a static on the 6700 JO?

Tags: HP Printers

Similar Questions

  • Windows Vista "Windows Installer service could not be accessed. Windows can run in safe mode or Windows install not installed correctly. »

    * Title *.
    Windows Installer not properly installed

    We just bought a new Dell with Windows Vista.  I tried to download i-tunes and I get the following error: could not access the Windows Installer service.   Windows can run in safe mode or Windows install not installed correctly.  I am not running in safe mode it should be setup of windows.   I am trying to install iTunes 8.0.2 Windows Vista 64-bit.  I found the info to repair Windows XP, but nothing for Vista.  Any help would be GREATLY appreciated.  I'm so frustrated.  Thank you.

    Hi BradandKim,

    We will try to start the Windows Installer service and see if that helps.

    • Click Start orb
    • Right click on computerand then click Manage.
    • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    • In the console tree, click Services and Applicationsand then click Services.
    • In the details pane, right-click Windows installand then click Start.

    Let us know if that fixes the problem.

    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I check if Windows is running in safe mode on my pc.

    Original title: Mr. Thompson

    How can I check if Windows is running in safe mode on my pc. I'm trying to uninstall windows defender but I can't run the windows installer, I am still running windows xp. Thank you.

    Hello

    On the four corners of the screen that indicates that you are in safe mode, safe mode will be written.

    For more information on installation of windows defender, chk issues this link

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-uninstall-Windows-Defender/90e2315a-861a-4AC3-aeb0-80c38be62bba

    http://www.ehow.com/how_6293303_uninstall-Windows-Defender-XP.html

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-Defender-uninstallreinstall-problem/6b7dd3e8-211e-46C8-A549-dbd53db0ed64

  • Windows Defender scan in Standby Mode?

    De :  Ruby

     

    New HP laptop with Vista installed.  My Windows Defender is "on", then set it to scan at 02:00 every morning.  However, there is no record of a previous analysis.

    Windows Defender analyzes mode "sleep" or what I need to change the departure time?

    Any help appreciated :)

    De :  Smithsonian

     

    N ° your computer must be turned on. No process or service will run in standby mode.

    I sugest you change your time.

    Another response of the community of Windows Vista discussion groups

  • Cannot restart; Function F8 does not work; stuck at "restart windows." Put in standby mode.

    Put the PC into standby mode.  Stuck in the status of "Recovery of Windows".  Impossible to restart.  Power off several times.  F8 doesn't work no more.

    I don't think that XP shows a message "Windows Recovery" when it comes out of Stand By.

    It does when it's Hibernation.

    If you've been cycling power, you can have damaged your system files a bit and should probably start by running a chkdsk/r from the XP Recovery Console.

  • My printer 3050 J610 goes in standby mode or sleep, and then I can't print docs it wireless

    Whenever I have don't print something for a few hours, my printer goes into sleep mode or sleep.  When it does, it can be used to print from my laptop or android for it.  Y at - it a way to put in place so that it doesn't "go to sleep", and it is always available for me to print with.  I like the printer, but it seems few off that you can't print on it wireless and it is considered as a wireless printer.  That's the only reason why I bought it and now I can't even use it without stepping down and turning the printer back again.  If I wanted to do this every time I was going to just print from my main computer!

    Thank you

    Ashley

    Well, I activated the incoming and outgoing settings under sharing files and printers in the firewall. I've also set up a connection between the router and the printer security rule. Since then, I was able to ping the router and the router by its IP number regularly for more than 72 hours. I hope that this solves the problem and everyone helps the dilemma.

    Mike

  • Drivers are interfering with Windows out of the standby mode after installation of Windows Vista Home Premium Service Pack 2.

    I followed the instructions of service newsletter and reduced to an Intel Graphics Kernel Mode Driver (igdkmd32.sys) that slows him back. The pilot is the more up-to-date version and the update of a windows wants.

    What are my options? I guess I need this driver as is the graphics found in the device manager driver. "Rollback Driver" is not appear as an option. I need to restore Service Pack 2 to resolve this problem? Thanks for your suggestions...

    For issues related to Vista SP2, there is FREE Microsoft Support assistance is available at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  I suggst contact you and get their expert help for your problem that was caused by SP2.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The printer is restarted when in standby mode

    1 HP LaserJet CM1415fn

    2 OSX and Win7 64 bit

    3. no error message

    4. no change

    2-15 minutes the printer reboots and initializes it.

    The definition of the printer off sleep or 2 h is not help. Always the printer reboots and initializes efter (screen-hum and white), 2-15 minutes.

    Workaround is to have the printer in stop mode. I would really like the printer at the booth of fashion!

    The problem is that the collaps HP firmware of a network chatty if WS-discovery is enabled. For example. If you have a Boxee Box in your HP printer network will crash because of all the transmitted network packages.
    The solution until HP corrects this error is to disable the feature in the Control Panel on the printer HP:
    1. go to the web site of your printer.
    2. choose "Network" and "Advanced".
    3. uncheck the "WS-discovery.
    4. apply/save
    5 made! Now the printer will work as it should.

    I hope that HP will fix their firmware as soon as possible.

  • Printer won't go into Standby Mode

    I just bought printer e-all-in-one HP Photosmart 7510 - C311a, and constantly when my Mac that works on OS X starts in mode 'sleep' the printer sounds as if it is being initialized.  It also has a message on the screen to turn off the unit to avoid damage.  I do not understand, this printer is a 'sleep mode' too?  I don't want you must manually activate it offshore, but he makes too much noise until the mac is turned back on.  What should I do?

    Is the printer plugged into a power strip or surge protector?  If so, plug it straight into the wall.

  • I currently use an HDMI cable to connect my laptop to my TV for streaming video. Anyway is to close the Mac but still flow from it? Right now it just runs in "standby mode", and the connection is lost.

    Hi all

    I currently use a HDMI cable to the video stream from my MacBook to my TV. It works fine except that it doesn't seem to be a way to close the laptop and always maintain the connection with the TV. First of all, I do not leave my laptop open, exposed if you want, when you're arms reach. Then, when it is connected to the TV, it is at least 2 to 3 yards away. In addition, I have recently adopted a cat. His favorite thing to do is to tap dance across the keyboard. Therefore, I am more able to let the laptop taken in isolation within the connective range of HDMI cable because the cat will walk on it. In any case, I tried to find a way to close the lid of the laptop, the laptop to stay awake and keep the connection to the TV. Any ideas?

    Thank you

    Sally

    See if there is a solution:

    https://support.Apple.com/en-us/HT201834

    Ciao.

  • Windows XP go into standby mode

    When I click on the icon the computer shutdown ensures he begins to go into sleep mode and then turns back on. I can hibernate the computer or stop it but not in standby

    Can go into the Hibernate mode, but not the sleep mode so use Hibernate

  • my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

    my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

    He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

    Hello
    (1) have you made changes before the start of this issue?
    (2) what is the exact error message/code?
    A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

    To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

    To change or restart the print spooler service

    You must be logged on as administrator to perform these steps.

    a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

    b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    c. right-click on the print spooler service and then click Properties.

    d. on the general tab, next to startup type, make sure that automatic is selected.

    e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Additional reference:
    Open printer troubleshooter.
    Let us know if that helps.

  • I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

    Hello

    I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
    Any suggestions?
    original title: connectivity Limeted

    The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

    Your messages are a bit terse, but if I understand correctly

    • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
    • All but one of these computers can reach successfully from the Internet via the router.
    • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
    • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
    • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
    • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

    Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

    Open a command prompt window (start > run > cmd > OK)
    Type the following lines and press ENTER after each line

    Netsh reset winsock catalog
    netsh int ip reset c:\resetlog.txt

    Close the command prompt window and restart the computer.

  • Wireless laptop can not find the wireless Officejet 6700 printer

    My laptop can't find my wireless printer Officejet 6700.  Printer is on the wireless network but the laptop cannot find it.  Laptop the wireless.  Have cisco router on my NBN skymesh satellite.  Have you tried printer setup in the control message panels reads:-printer is not found.  Using windows 7.  Have tried to use scan doctor, turning his router unpluging printer and electrical power to the router. Still no luck.  Printer is about 1 meter portable.  Do I have to set up a home network and connect like that.

    If you can easily plug the printer into the router using an Ethernet cable, who always beats wireless!  Try it!

  • I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all).

    Hello!

    I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all). I picked up my installation disc and everything, only to find out that someone stole completely he reapply. I am unsure weather or not it is enabled or whatever it is. I tried to call Microsoft technical support and they said to go to the retailer I bought since then, but the retailer in question no longer exists. I'm just screwed?

    Thanks for your help!

    You can retrieve the product key, and then use it to re-download a new copy:

    Here are four utilities, which can display your product keys if they are still there:
    Belarc Advisor: http://www.belarc.com/free_download.html
    (He did a good job of providing a wealth of information.)

    Also: http://www.magicaljellybean.com/keyfinder.shtml
    and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
    and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

    Go to the recovery of the software Page and then enter your key:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    If you plan to upgrade to Windows 7, see:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

Maybe you are looking for