Similar Questions

• Sansa Clip + not recognized by the Audi music interface

  Hello

  I'm trying to connect my Sansa Clip to my music interface of cars (Audi A4, model 2010). My Sansa Clip says that he has plugged in and the battery starts to load, but my music interface of cars does not recognize the mp3 device. Anyone have any idea what can be the problem?

  The Audi music interface manual says that there is a limitation in mp3 with "USB Device subclass 1, 2 and 6'.» What may be the problem, that "subclass" Sansa Clip + have they?

  / Olle

  Olle wrote:

  Thanks for your reply and your quick response!  Your answer solved my initial problem. Now the music interface of the car recognize my Sansa Clip, but now the problem is that it cannot find the files that can be read. I noticed the same 'phenomena' trying to find music via my computer files, when having put MSC is not possible to see all the files. I have .wma and .mp3 files both on the Sansa Clip.

  Is there a way to solve this problem as well?

  Your computer cannot see or access the files that have been transferred to MTP mode when you are connected to the MSC and vice versa. It may be a similar situation with the stereo system in your care. You may need to remove all the files (build formattiing be the fastest way to do) and re - transfer to your player in MSC mode.

• Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer.

  Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer. The computer thinks I have a keyboard 600 wireframe. I tried to install the IntelliType 8.2 64-bit for Windows 7 driver but it tells me that I already have a newer driver installed and won't let me install it. Are there specific drivers for this keyboard. I love the keyboard but I can't customize the special keys.

  Hi Tom,

  Check out these links and check if it solves the problem:

  "Troubleshoot the Intellipoint or IntelliType software installation, LifeCam.

  http://support.Microsoft.com/kb/953691/en-us

  "Troubleshooting: keyboards"

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Please let us know about the status of this issue.

• Apple not recognized with the new update ID

  What now, after the update

  Apple not recognized with the new update ID!

  I have the same question. The user and the password are ok because I can log in here: https://appleid.apple.com

  But after the last update my iPad say that "the apple ID or the password is incorrect."

• Sansa 8 GB Clip not recognized in my computer...

  OK so I just got this thing today and I plugged it to my computer to recharge before I did something to it. About 6 hours later I checked it and it was not fully charged, but I decided to check a few things anyway. I clicked on "My Computer" and it was not recognized here. So I tried all my usb ports and it was a no go too. Then I had my husband try it with his computer and he was not recognized in 'My Computer' but it is recognized in Device Manager. So what don't understand me? I have read the booklet that accompanies the thing and he said nothing to have need of software and everything I had with him, it was a disc (sp?) mini Rhapsody free trial. If someone please help the dummy! All I want to do is music to listen to while I clean up the House and something to choke the complaint of the people I work with!

  I thank in advance, BTW!

  OK, so I found the problem. I just need to upgrade my wmp to the correct version. I was always using v.9 Anyway sorry to bother someone.

• New Sansa Clip + not showing the track titles

  I recently got a new Sansa Clip + as a Christmas gift to replace my old (his helmet came out). I've updated to the latest firmware (even my old 01.02.18A,), and I copied my entire library of music from the old to the new player. Everything plays and works in the same way, except for one thing: on the new drive, the song titles never see the place, and the name of the file is always displayed during playback of a song. My old player would show the title of the song of the metadata instead of the file name during playback if it was available. I checked that the titles are actually there and were not lost through some freak mishap copy, so I'm puzzled as to why it won't work as my old drive.

  Anyone know of the issue and how to fix it?

  Well, Yes, that is my point of view. All tags are there, and all the rest (album, artist, etc.) is displayed in the main screen of the reading and the news section of track except for the title (who, oddly, has never had a track in any case information entry, but that is not the issue).

  ... well that, as strange as it may seem, the titles of the tracks seem to have returned - after, I moved music off the device to analyze the data volume to activate the Clip + Replay Gain. Really weird, but hey, it works now! (Maybe switch to the computer did it, since I initially copied it directly between devices?)

• Sansa e280 not recognized by the pc

  Hi all! I'm new here and I recently had a problem with my sansa 280. I know that for my sansa display in the pc I need to put it on the usb mtp mode. But when I put it on the pc, it does not recognize my computer and he says: "usb malfunctioned or not recognized by the pc. When my sandisk is out of the computer works perfectly. How can I get my computer to recognize the sandisk card? I want to put more music on this subject, and I can't! I use windows vista. Please help me, I would appreciate your help a lot!

  I had your exact the same problem. You can read in the thread I started. I pasted the answer that worked for me here.

  c1u31355

  Download Windows Media Player 10 or 11 from www.microsoft.com and reinstall it. This usually fixes things. Next step, but only if this does not work, is to get the "MTP Porting Kit" from Microsoft and install it.

  Let us know if those who help or not.

• Old pc in enclosure hard disk not recognized by the new pc using windows vista

  Old pc unbootable.  Got a new laptop and want to recover data on the old hard drive.  Use a Sweex 3.5 IDE enclosure, to connect the old hard drive via the USB port again mobile. The hard drive is visible in device management, but not in my computer.  No idea how to solve this problem?

  Hi Tomvdv,

  At this point, it would be best to contact directly the Sweex.  It is the responsibility of the manufacturer to provide drivers for their devices:

  http://www.Sweex.com/en/service-support

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Micro vault not recognized on computer running Vista

  My micro vault is not recognized my micro vault is not recognized on my computer how can I fix this problem. __

  Hey Guyver Micro,

  Ø summers - get you any error trying to connect the device.

  I recommend you to check if the device is detected in Device Manager.

  1. click onStart, type devmgmt.msc in the start search box and press on enter.

  2 see if the device is detected.

  You can run the Fixit which fixes some common problems related to the USB. Open the link below and click it on theFixit button.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Password not recognized for the new Gmail account

  My gmail account ID / password is not recognized by Thunderbird. It worked, but somehow it has suddenly stopped working (not able to receive or send emails and just make an hourglass whenever I select any folder in the account).

  Some other details:

  . I use Thunderbird 38 (could the upgrade caused the problem?).
  . I tried to remove and re-add the account. It connects fine, but does not recognize the username/password.
  . I did some Google 2-step of checking is turned off.
  . I deleted the Google Contacts.
  . I checked that access for less secure applications is disabled in Google (even though I believe that Thunderbird 38 should not require this).

  I followed all the steps I find Google search, including the https://support.mozilla.org/en-US/kb/thunderbird-and-gmailsite. Nothing seems to help.

  I'm up a Creek. I like Thunderbird (use it for multiple e-mail accounts), but hair pulling try that it works - and it takes too long. Any suggestions?

  Thank you.

  account15:
  ENTRANTS: account15, (imap) imap.googlemail.com:993, SSL, OAuth2
  OUTBOUND: smtp.googlemail.com:587, SSL, passwordCleartext, true

  You will need to set OAuth2 authentication for the SMTP server as well.

• HDR HC3 be not recognized by computer with XP

  My computer does not recognize my camera which is a sony HDR HC3

  If the USB connection is not recognized, try the following steps:

  • Make sure a Memory Stick is inserted and recognized correctly by the camcorder;
  
  
  • Slide the MODE switch repeatedly until the PLAY/EDIT is on;
  
  
  • Value [USB SELECT] [Memory Stick];
  
  
  • Disconnect other devices to your computer;
  
  
  • Try a different USB port. If you are using a desktop computer, try the USB ports at the back of the CPU Tower.
  
  
  • Try a different USB cable, if possible;
  
  
  • Press the RESET button using a pointed object. The RESET button is located on the front of the lid of the cassette compartment.

  If my post answered your question, please mark it as "accept as a Solution.

• email password not recognized, have tried new password always not recognized

  I tried a new email address and the password is also not recognized.

  You don't have to mention the e-mail program you use. Whatever it is, post in this forum.

• CS4 serial No. not recognized on my new Mac from Apple.

  I had Suite Adobe Creative for many years, but on a newer computer (new Macbook) swap the new license doesn't seem to work. Maybe I'm doing something wrong, but I don't know what. Until someone asks, these are legitimate, purchased licenses. Originally separate licenses for Adobe, had then bought CS2 upgrade and now to CS4.

  Anyone have any ideas?

  Italoabri try to run any program uninstaller that will work.  If it's not working, then go to the CC cleaning tool.  We invite you to update this discussion if you have any additional questions.

• Clip - also not recognized by computer power supply problem

  I own a Clip 2 GB and love it - however, I'm having a problem that I hope is an easy solution.

  My video is completely dead with a white screen.  I thought that it was just an empty battery, however when I tried to plug in my USB (2.0) port and it will not charge or be recognized by Windows.

  • I tried reseting the Clip via the instructions in the FAQ - no luck.
  • I tried to recharge using three different computers - no luck.
  • I have the latest version of Windows Media Player.
  • I have connected it to the USB port with the Clip Hold button slide down and the central button no down - no chance.
  • I installed the update of the firmware previously (in the week).
  • I tried to reload (leaving it plugged in all night) despite the blank screen - no luck.

  Am I missing something? Or should I call Technical Support?

  Looks like you did just about everything - you could also try ca load if you can.  But it sounds like it's time for Technical Support...

• Logic pro 9 serial number not recognized on the new mac. How can I solve this problem?

  Hello, I have a version of Logic Pro 9 I am trying to install on my new mac with El Capitan,

  When I enter the serial number on the back of my copy it invalid sys.

  How can this be?

  Thank you!

  Was it a (boxed DVD) version upgrade?