New Satellite A300-14R frizzes in installing or using an application heavy

Similar Questions

• Satellite A300 - 1 2 cannot install Win Xp - lack HARD drive

  Hello
  I just bought a new Satellite A300 - 1 2 without an operating system. Now I would like to install Win XP, however, during the instalation, I get a message indicating that installation of windows is not all hard disks installed on the system. What could be the problem?

  Please don't be angry with me, but you search here in the forum for similar cases?
  I imagine that you didn t

  So, use the forums advanced search and the search option for driver SATA, Intel Storage Manager, etc.

  There are a lot of discussions about this theme

• Satellite A300-1J1 - how to install 2nd HARD drive?

  Hello

  I bought a Satellite A300 and I see in the workbook loads it is possible to add a 2nd hard drive. So I bought one and when I opened the box of hard drive, I have not found a connector to connect to my hard drive. I think I have to install a SATA connector, but I have not found a way to proceed.

  Thank you

  PS: Excuse me if you find mistakes, I don't speak very well

  Hey,.

  If there is no second SATA connector on the motherboard it s not possible to install 2nd HARD drive because you can t add such a motherboard connector.

  As far as I remember there are other threads on A300 and 2nd drive HARD here in the forum and the point is that all A300 using the same case for laptop, but the mothers are different. So you can have a 2nd HARD drive Bay but not connector.

• Satellite A300-1 OC - problem installing Windows XP

  Hi all!

  Faced with the need to install * Windows XP * on my * Satellite A300-1OC. *.

  Here's the problem:
  the * pilot integrated distribution OS for the SATA downloaded from the Intel site.
  When you install XP no problem, but * when you drive where to install the system all the drive letters got mixed up *.
  As it has already established a system, the * laptop starts sometimes hang on for 2-3 minutes, then again normally.* operating

  Help solve this problem and recommend the correct SATA driver for my computer.
  And I would like to hear the difference, * if I set BIOS compatibility mode or leave AHCI.*

  + Thanks in advance. +

  Hello

  Please, read here:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52625&TSTART=30

  It may be useful for you. The topic starter had the same problem, it instaled windows, compatible mode, and then extract the driver of the exe files.

• Re: Satellite A300 PSAGCA: how to install Win XP as 2nd OS

  Hey any reader for the first time and shows for the first time.
  My comp is the Satellite A300 PSAGCA-02U010

  You 2 questions, hopefully someone can help me with.

  The issue of the first: like many people, I hate Vista.
  How can I run XP as a second OS that don't live my warranty?

  2. the volume level is not very strong (sound) when you watch a DVD etc. I tried different settings, and every time I do I have to restart to take effect, which is a pain that vista is slow to restart. I have downloaded the driver, but noticed that it is exactly the same as what is installed already :(

  See you soon

  > How can I use as a second OS XP who don't live my warranty?
  Installing programs or operating system would not avoid the warranty!
  You can install the Win XP as second OS without fear.

  But before install you anything, I would recommend the Toshiba recovery disc creation!

  With regard to the sound:
  As far as I know the parameters which are changes in the player are not not in trouble. You must increase the volume of every time when you start the software again.
  But have you tested different actors? For example, VLC player is a simple and free tools.
  I recommend to test

• Can satellite A300 - 15 M - I install a second HDD?

  Hello.

  I have a SatelliteA300 - 15M. 2 years ago, I bought the laptop. I have the 250 GB hard drive that came with the laptop. Recently, I received my laptop in service of the local store. I noticed that there was an additional location to another hard drive. I saw a post that some of A300/A305 laptops have room for a second hard drive, but not the connectors.

  If someone has A300 - 15 M can they please tell me if I can install a second internal hard drive in my model? Is there a safe way to find if I can install a second hard drive?

  Hello

  > but no connectors.
  If the case is clear: If you don t have a second SATA connector, you can install a second HDD of the t.

  Also check the forum on these issues. The point is that a notebook series (e.g. Satellite A300) is always equipped with the same case, but the material is different. So not all models have the same features. ;)

• New Satellite A200 is restarted after installing XP

  Hi all

  I hope someone can help with this problem.
  I have a new Satellite A200 and made in the wake of the SP2 and matrix storage drivers.
  I completely deleted all partitions on the disk and installed XP (slipstreamed version).
  All going well until the first reboot and then it restarts just over and over again.
  If I have safe mode of choice it loads correctly and I can't install drivers etc.
  I wonder if it is a BIOS issue?
  I tried to update using windows bios update for XP and it will not allow in safe mode.
  The reboot happens before even starting XP screen appears, hard drive blinks twice, then it power cycles.
  I hope that I'm not the first to encounter this problem.

  Any help would be appreciated.

  Hello

  Mhhh very strange to me, it looks like a software problem!
  In Windows XP, the default setting is for the computer to automatically reboot when a fatal error occurs. If this fatal error only occurs when you stop, the system reboots automatically.

  Have you noticed the same course the Vista OS?

  What you could do is to install the Vista from the recovery CD again, and then update the BIOS to the XP version.
  After this procedure install the XP with all the service packs and the compatible Intel matrix Storage Manager

  Good luck

• Satellite A300 - no Audio device installed

  Hey,.

  During the last week, I had trouble with my audio.
  The first incident occurred then that I was browsing the internet, and suddenly an error pops up and off my sound. When I checked for audio devices it says there where not installed and when I checked the Device Manager there is also none installed. I then uninstalled the driver/software from my computer and reinstalled them, but yet the drivers were not recognized. Instead, it there was only a HDMI output driver that would say that he plays sound, but none would come out of my speakers.

  Then I had abandoned all hope and played a video (no sound) when all of a sudden sound began to play off the speakers and all the audio drivers have been recognized.

  Then happened the same incident as the first, and now still can't solve this problem.

  Also mistakes keep coming by saying "Soundchanger.exe" does not work.
  Any help would be great! I uninstalled and reinstalled all the correct drivers and always use system restore, but the sound still doesn't work.

  Hello

  Has this happened with Windows Vista preinstalled Toshiba?
  If yes then I would recommend restoring the operating system using the Toshiba HDD image or the recovery disc.
  I think that it is necessary if the pilot of its installation or update didn't help.

  The new installation of the OS would also be useful to check if this is a hardware or a software only problem.
  Usually after the new installation of the OS, the sound should work fine. But if you this sound issue still appear then a hardware problem could be the reason for that, as mentioned by Akuma.

  I had some problems of sound, but only after the installation of XP_ _Win. Some MS patches that are part of the SP3 has been installed no. and therefore the sound n t function.
  So I deleted the audio driver, installed SP3 and after reboot the new, I installed SP3 and the sound worked again

• Satellite A300-1BZ: %1 is not a valid win32 application after change of themes

  Having had my Satellite A300-1BZ for a couple of years now, I found myself suddenly bored standard vista themes and started playing with change them. (I was after a ultimate black watch with change start menu and buttons etc.)

  In any case cut to the Chase, I went wrong somewhere with VistaGlazz through to replace something like shell32.dll
  As it said in the readme file I changed it to shell32.dll.bak

  My computer has continued to run fine until I ran a reboot. After that, I got after the log on screen was a blue screen with a mouse.

  http://i69.Photobucket.com/albums/i53/eazynowrudeboy/IMG000030.jpg

  Luckilly I have an iphone so managed to get on internet forums and find a solution which was to use a command in cmd.exe that fixed the problem.

  The only thing is now that I have a very basic windows Classic theme that when I try to change to Vista in the theme settings it gives the message:
  * "the theme could not load. %1 is not a valid win32 application. "

  Any help and step by step for the user base would be much appreciated! I guess it can't be that bad since Windows is still running and working properly!

  Thank you

  Hi tarmacsnortingmonster,

  That is the reason why I n t play with any 3rd themes part because I always read from time to time on various problems after installation. So I don't use Windows themes pre-installed and don t have problems.

  In any case, I think you should try a system restore to an earlier point before installing this theme.
  I hope this helps if not it is time to reinstall Windows, I think that :(

• Satellite A300: Polish character does not appear using hotkey with 'c '.

  Hey,.

  I am user of Toshiba Satellite A300 and early on, I discovered that there the combination Alt + C assigned to commissioning ATI - Catalyst Control Center. Unfortunately this combination should normally produce Polish characters 'Â' (it seems not properly on that this page is in some sort after as I copied the word - it's 'c' with stong top - here its capital version "Â" accent).

  However, the necessary character of Polish does not appear.
  I can get the capital version with Ctr + Alt + Shift + c, but no normal version.

  I guess that there must be an error in the locale so I tried to change to English and Polish with zero results.

  A guy of this sayed forum which is easy to cut.
  "Just enter the catalyst driver and there must be option as 'shortcut'. Turn the power off. "

  But it's not easy, I can't manage this problem.
  I try to do like that!

  Please help me.

  Vectrim

  Hello

  I put t see no reason to post several times on the same topic!
  I found this thread on the same topic, and you have already posted there.
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=131543#131543

  Why you n t follow it? It always useful to follow a thread to avoid confusion.

  The solution should be:
  Access the Catalyst driver and disable the option called 'shortcut '.

• I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and everything transferred and has been using the application on an old PC for a while so I'm not sure is this is what is ca

  I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and all transferred to an older Mac and has been using the application on an old PC for a while so I'm not sure is what is causing my problem. I have bank statements indicating payments of my subscription to Adobe for this product update.

  Hi Seth,

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Hope this helps!

• Satellite A300 - SPDIF disabled after installing XP

  Hello again.

  After I downgrade my A300 from Vista to XP everythings works fine.
  Just one problem. My SPDIF no longer works.

  No red lights, no possibility of he chose in the acoustic Panel...
  I have installed the Toshiba page sounddrivers.

  Someone counsel? New drivers or do I need?

  Hello

  To my knowledge, the S/PDIF is certainly available on this laptop, and you should be able to use it

  I recommend that you install the Realtek audio driver from the Realtek page!
  There should be a more recent version

  Also, please check if you are using the latest version of the BIOS.

• Need for new Satellite A300 adapter & power cord

  Hi Forum,

  You need to replace the A300 adapter & power cord. I live in the United Kingdom. Do you know if the Toshiba ASP at the United Kingdom replace these components? Can I order directly from Toshiba? I looked on Amazon, but most of them seem not real!

  Thank you all!

  Hi Susan,

  Normally you can order the adapter AC and power cord of each authorized service provider.

  Just give them a call or email. I m sure that they can send you a new adapter. :)

• Should I buy the DVD with the new Satellite A300-16I of recovery?

  Hello

  Does anyone know if a windows Vista DVD should have been included in the box? If this is not the case, how can I receive a copy?
  Thanks for your help.

  Martijn

  Hello

  As far as I know that all new Toshiba laptops come with the recovery of HARD drive image. This means that there is more no recovery media. When you start your laptop model, you will see a reminder about creating recovery DVDs.
  You will find on the desktop for Toshiba Recovery Disc Creator shortcut? If Yes, please launch it and create recovery DVDs.

  You will find the HDD Recovery folder on the second partition? Please do not delete it.

• Satellite A300 - 10 M: how install driver WLAN

  I downloaded the Atheros WLAN driver but do not know what are the files to be opened to load the driver on the laptop.

  Any help, please?

  Thank you

  Hello

  I guess you ini files and the dll in the folder of the Wlan driver
  In your case, I would go to the Device Manager. Here, you must mark the card Wlan (unknown device or Ethernet card in the network controllers) and must use the option install driver. Use the advanced procedure, and then point to the folder of the Wlan driver that you downloaded on the page.

  Welcome them