New WD drive HARD black not recognized?

Similar Questions

• Drive hard is not recognized and after fashion 'sleep'. Only after reboot it is recognized.

  I installed a Seagate Barracuda 1 TB internal hard drive.  He is recognized only after a restart or cold.  After "standby" mode, it does not appear in Windows Explorer or disk management.

  Hello Elkrib,

  Welcome to the Microsoft Answers Forum!

  I suggest to change the settings in power options and check if this can help, please follow the steps below.

  (a), click on start > in the search box, type in Power Options.

  (b) under scale (recommended), click on change Plan settings.

  (c) then click on change advanced power settings,

  (d) the tab option power click on hard disk, and then click enable disable hard drive after.

  (e) by virtue of disable the hard drive settings, set it as ever.

  (f) click on apply, OK

  You can check the link below the similar question.

  http://social.answers.Microsoft.com/forums/en-IE/w7hardware/thread/3be1b0c4-c0d1-4069-a0b9-76c259517a77

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• Re: Satellite L555 11 L: BIOS indicates the drive HARD is not installed, BOOT Manager said HDD

  Hello!

  I had problems with my Toshiba laptop.

  When I tried to boot my system after a regular stop it does not recognize the HARD drive more.
  BIOS indicates the drive HARD is not installed, the said BOOT Disk Manager failed.

  Tried the HARD drive to a desktop computer and it works fine. This is not a new HDD SATA is recognized.
  However, the boot sequence itself and other functions seem to be ok.

  Who is wrong?
  The laptop is 1.5 years old and didn't have any problems before.

  Any help is appreciated ;)

  Hello

  It seems that the HARD drive is damaged.
  In your case the drive HARD test would be recommended.

  Download the software called Drive Fitness Test. It the free tool that can be used for the test of HARD drive.
  If the HARD drive is not detected or you will get errors, then it means that you HARD drive needs to be replaced and OS need to be installed again.

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• External hard drive gives USB not recognized error

  I have a Western Digital Passport 80 GB HD, which worked fine with XP until today.  I plugged this morning and received an error not recognized USB.  I followed the troubleshooting tips and online help.  It seems that in most cases, if you go to computer management / disk management, you can see the external hard drive.  This is not the case with mine.  I don't see the player.  I downloaded the recovery software, but everything is based on the premise that the drive appears.  Mine does not work.  Can someone help me?

  Thank you.

  Unfortunately, this drive has probably went wrong.  Have you tried another cable to connect your player to your computer?  It may be a long shot, but it is possible that the cable could be damaged.  You may need to take your car to a specialist in recovery to recover the data.  I apologize for the bad news.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Hard drive WD Passport not recognized.

  I dropped my external hard drive and now it is not recognized.

  It can be broken.

  If she does not turn when you plug it in, buy a new one.

  And try it in another computer

  See you soon.

  Mick Murphy - Microsoft partner

• Drive hard will not read or write media

  G ' Day,.

  Been problems the reading and writing of discs in my office a Dell Inspiron530s, running Windows Vista Home Premium 32-bit, with a (TSSTcorp DVD +-RW TS - H653F ATA Device) hard drive
  Insert a disc, the disc will attempt to load the disc, and after about 30 seconds the player will be set automatically opens and instruct me to insert a disc
   
  I tried to delete upper and lower filters in the registry in class editor {4D36E965-E325-11CE-BFC1-08002BE10318, this didn't solve the problem, also updated driver software and have tried to uninstall Drive and restart windows to discover once again, no effect}

  Have already tried Windows Automated Troubleshooting tool http://support.microsoft.com/gp/cd_dvd_drive_problems
  with the following results:

  CD/DVD, reading and writing	Publisher details
  Problems found
  Media in the CD/DVD drive is not readable (TSSTcorp DVD +-RW TS - H653F ATA Device) Media in the CD/DVD drive is not readable (TSSTcorp DVD +-RW TS - H653F ATA Device) The drive is empty or the media format is not supported	Not fixed
  Insert the decipherable by media Successful

  Verified issues
  Class filter drivers are corrupt One or more specific class filter drivers are missing/corrupted	Checked
  Filter of device drivers are corrupt (TSSTcorp DVD +-RW TS - H653F ATA Device) One or more device-specific filter drivers are missing/corrupted	Checked
  Device is not working properly (TSSTcorp DVD +-RW TS - H653F ATA Device) This device is faced with a problem that it prevents to function properly	Checked
  Drive is disabled (TSSTcorp DVD +-RW TS - H653F ATA Device) The CD/DVD drive have been disabled in Device Manager	Checked
  Drive is not assigned a drive letter The CD/DVD drive is not accessible via a drive letter assigned	Checked

  Problems found	Details of detection
  6 Media in the CD/DVD drive is not readable (TSSTcorp DVD +-RW TS - H653F ATA Device) Not fixed
  The drive is empty or the media format is not supported
  Insert the decipherable by media Successful Insert a CD or a DVD disc play in the selected CD/DVD drive
  Verified issues	Details of detection

  6

  Class filter drivers are corrupt

  Checked

  One or more specific class filter drivers are missing/corrupted

  Fix class filter drivers Not work

  Remove references to class filter missing/corrupt driver

  6 Filter of device drivers are corrupt (TSSTcorp DVD +-RW TS - H653F ATA Device) Checked

  One or more device-specific filter drivers are missing/corrupted

  Uninstall the device Not work Uninstall the device problem

  6 Device is not working properly (TSSTcorp DVD +-RW TS - H653F ATA Device) Checked

  This device is faced with a problem that it prevents to function properly

  Rescan devices Not work Look for changes in available devices Uninstall the device Not work Assign drive letters to all the readers who have no drive letter

  6 Drive is disabled (TSSTcorp DVD +-RW TS - H653F ATA Device) Checked

  The CD/DVD drive have been disabled in Device Manager

  Turn on the device Not work The device must be activated before it can be used

  6 Drive is not assigned a drive letter Checked

  The CD/DVD drive is not accessible via a drive letter assigned

  Drive letter Not work Assign drive letters to all the readers who have no drive letter _________________________________________ As you can see that the report informs me that media that I inserted is unreadable, but the media is readable, I tried to many Audio CD that will play perfectly on other computers Just for some background information, first sign of trouble with the drive showed while trying to burn a disc on Itunes, with the message "The attempt to burn the disc down, an unknown error occurred (4280)." Since then the player dropped only Hill, in its current state, not reading anything I have my suspicions that the optics in the drive can be turned, and it must be replaced, but id rather know for sure before I'll come and will makes Any advice or solutions would be greatly appreciated Thank you very much for your time The Roo

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ================================================================
  ================================================================

  If necessary, you can try an InPlace upgrade/repair Installation which should allow you to keep the
  programs and data backups redundant but are always a good idea.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =============================

  And if nothing else works a new facility can assist and/or replace the CD/DVD drive.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satego X 200 21U: drive HARD internal not external usable after upgrade

  First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.
  After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive is not usable in my extern Dockingstation.
  Does anyone have a good idea what causes this problem? The HARD drives are locking the entire system, if I try to access and some formatting.

  Hello

  What do you mean by is not usable in my external docking station?

  I assume that you have placed the 2.5 HARD disk in a USB enclosure that allows to connect the HARD drive to the computer USB port.
  Is this good? So what harm s? Is not recognized USB HARD drive or what?
  Have you tried to connect different computers HARD drive?
  Otherwise, to do this

  But if the HARD drive is not accessible, using the case of USB, or use inside the laptop, then I would say it is a HARD drive malfunction

  Why this is happening?
  The writing and the reading drive HARD is a physical process which underline the material parts such parts can still die

• Personal Media Drive (HDD) is not recognized in HP xb4 Docking Station laptop with HDX 18i

  Hello:

  This is my first post since obtaining these three pieces of equipment.

  a lot of problems with my new laptop and separate hard drive docking station.

  But this one is the most annoying:

  my HP Personal Media Drive HD10000x slips into a Bay (specifically for these players) on my xb4 docking station.

  Connected to the docking station is my laptop, a HDX18.

  Everything works very well between the laptop and docking station, except the HARD drive: it lights not or anything when you slide into the dock media Bay.

  This is supposed to be 'hot-swapable' and everything, but it is just dead.    It's new, but I hate to send it back (at my expense) if there is another problem here.

  If someone has encountered this?

  Help, please!

  Thank you

  You need to connect the power adapter to the personal media player - at the back of the dock XB4, next to where sits the personal media player.  So there are two adapters CA / CC plugged into the XB4.

  Message edited by taylorspam on 11/23/2009 07:45

• Try turning off hard/reactivate the new disk drive hard breaks down

  I have a computer with a failed hard drive and tries to disable my Acrobat Pro XI. We tried to turn off and try to go on a new hard drive and are not able to transfer through. What can I do to fix this? Thank you

  to turn off (make sure you have your serial number), open the default Acrobat > click Help > deactivate.

  on the new hd install acrobat and activate with your serial number.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Toshiba T2000SXE - drive HARD work not correctly

  Hello

  Me, it's once again and needs help mine I only before the court it is however more also not drive HARD problems got can help me there is one
  Skype: benny24534
  MSN: benny_elfischnuffi@live
  East of Germany (Germany)

  has also no BACK or as

  Thanks to vorraus to aid

  Hello

  To be honest, I don't understand what you mean :) It would be better if you wrote in German he could understand.

• My new Canon 70 d is not recognized by Windows 10 anniversary.

  Anniversary of 10 Windows running under Parallels 12 on a new MacBook Pro.

  Plug my 6 d and that it appears in the devices.

  Plug my 7 d and it does NOT appear in the devices.

  I have two other (not Canon) cameras that work with Windows.

  Using the same USB cable for two Canon cameras. Even tried another cable.

  I have two new cameras: 6 d and 70 d.

  The 6 d is modified and cooled by DS Central.

  The 70 d is original.

  MacBook Pro with 16 GB of memory running macOS Sierra.

  Using the same cable for two cameras, EOS Utility 3 that was installed for the 6 d running.

  The 6 d is recognized by the works and EOS Utility 3.

  The 70 d is not many EOS Utility 3 or EOS Utility 2.

  And curiously, the 70 d is also not recognized by Windows 10 (update birthday, running under Parallels on the MacBook Pro 12).

• My cd/dvd drive is still not recognized, have tried to make a sys.restore

  I recently had some problems with my registry and other places after receiving unknown virus problems. Now, I believe that this caused my componet cd/dvd not work or even be recognized. I did several restarts after uninstalling and reinstalling the drive and still is not recognized or displayed in the DEVICE MANAGER. I had several boot SYSTEM RESTORE, but to no avail. My question is, is the cd/dvd drive is no longer functional?

  My question is, is the cd/dvd drive is no longer functional?

  It is possible that the drive does more - if you have another computer, you can test the DVD drive in this computer. Also try the links below.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media - Fix It:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Drive hard internal not found to fix this problem, try reinstalling the drive

  So I get the error message: internal hard drive not found to fix this problem try reinstalling the drive

  Once I got the error, I removed my 1 TB HARD drive and replaced by a 525 GB SSD and I still get the error. After testing the original 1 TD drive HARD, has nothing wrong with him, so it seems to be something wrong with the computer itself.

  I ran the PSA test and it does not detect any problems with the hard drive and no other errors.

  What could be?

  Edit: I have the Dell XPS 15 9530

  The fixed. The BIOS has been updated with virtualization, so we turned off and also removed the SSD of 32 GB.

• Seagate hard disk not recognized

  I have a drive hard seagate that has been configured for MAc, in 'my computer', it does not recognize this material. How to configure Windows 7?

  He is identified in disk management, if so remove all found partitions, Partition/format then to NTFS

  With the help of his mac format that cannot be read by win