Newbie on permission question

Similar Questions

• newbie Y560P laptop questions

  Lenovo forums are very informative and I looked for answers to my questions and have found some but not all. I recently (St Patty's day) ordered an ideapad y560P. I should have asked these questions before buying but there was an e-coupon deal that ends the day of St patty, I had wanted a laptop pretty advanced for a while so I jumped. Life is not perfect!

  1. a clean install of windows is possible with recovery disks that Lenovo provides? If this is not the case, what is the best way to do it?

  2. the Y560P can fully utilyze the new SATA 3 SSD as boot drive? Void the warranty?

  3. wait for Lenovo to ship my laptop until the Sandy Bridge sata port questions/reminder are developed?

  4. someone here successfully using imaging software (like Acronis true image} on their laptops?)

  Sorry for the newbie questions. I built my own desktops for years, but this will be my first laptop. Time passes! Thanks in advance for any help.

  Hey, I'll do my best to respond to these:

  (1) actually, no discs are technically provided by Lenovo. Your system comes with a separate, partition that contains a recovery image. That being said, you can create a set of recovery disks by running their usefulness (comes pre-installed). When you use these disks, it basically as a duplication process. So yes, you can do a clean install, if you think it their image pre-built a clean installation

  (2) not sure about the 3 SATA drives, but drives does not cancel your comprehensive guarantee. I would always keep the original drive where the system needs to be sent, but I think that the RAM and CPU are considered as 'evolutionary customer options' and are therefore not guarantee-killers.

  (3) from what I've read, Lenovo has already stopped the lines with questions of Sandy Bridge. None of these units should be delivery to consumers. If I remember correctly, it only affected some of the i7 lines. If you have concerns, you can always call Lenovo with your serial number, and they can check if the unit is affected. However, Lenovo has been very quick to fix this, I just couldn't see their shipping defective units known to customers.

  (4) Acronis and Ghost work quite well, assuming it is a standard drive. I could not find any problems with people using either a product on the readers of the so-called "hybrid".

  Hope that helps a bit!

• newbie triggered custom question

  Hi gurus of Labview:

  It could be a very simple question for you guys, please provide some tips.

  Here's my scenario measure: I need monitor output of the sensor which is a signal voltage (to AI0), I just need to get the voltage reading when I get a trigger signal to axis to another (PFI0). I would like to save to a file .txt with the news. on the value of the voltage and the time stamp of each measure. With a simple while loop and the DAQ assistant, I can get the measure to start when a trigger is detected on the PFI0, however, the measure will now continue to operate after that. Instead, I want the system to measure a voltage value, then wait for the next trigger signal. I'm pretty new to labview, so it will be very appreciated if someone can point me in the right direction.

  Thank you very much.

  Shao

  OK, after reading this link given above about 1 sample (timed HW) I think that what you really want is continuous samples with the sample on your external clock clock.

  Apparently there is no buffer with the 1SHWT (I'm short hand here).  If you miss one, you get the overflow error.  That tells me your loop is medium to slow or your pendulum goes faster than you think.  By going with continuous samples, you will not have to worry about this.  You can simply take as much data as you want and save the heap in the file.  This will make things work a little easier.

• Newbie BB development question

  Hello eveyone. I hope this is the right place to post this question, but I'm looking for advice. I'm new to the development for BB, but since 3 days I did a lot of reading. The only problem with this is that the more I read more confused I get. I have developed solutions ASP.NET, but never anything like that for mobile devices.

  Here are my thoughts on what I would do:

  -Create a Web page for the BB, which goes to a SQL Server, accessing a view and extracts the data in a data Repeater or a gridview for viewing.

  I have an IIS server running locally and can be viewed on BlackBerry now. I've set up and you can check out. WML and. Pages HTML to it very well.

  My question is this. I read about this plug-in for Visual Studio 2008. I downloaded and installed successfully.

  I do not know the following:

  -Can I do what I would do without BES?

  -What would be the best way to go about this? A few suggestions on what would be the best way to approach this project.

  Any guidance would be greatly appreciated.

  Thanks in advance,

  Bob

  psu99 wrote:

  So I can just use Visual Studio.net 2008 and create a sample page. I use the PlugIn which can be downloaded or can I just without programming?

  From what you say, you just need Notepad, vim, emacs, any other to design a Web page. The fact that You ' l browse this page with a Blackberry or an iPhone or a Samsung is on top of that.

  psu99 wrote:

  And what you say to me that I didn't need BES... my point of view on what it was only used for PUSH applications.

  You use a BES is required if the Web server is not reachable from outside your corporate network. In this case, you need BES just for its web proxy that will allow your browser to reach a machine inside the LAN. BES can also be used for automatic authentication issues based on the PIN code of your device and/or X.509 private keys that can be installed by the IT company.

• CVP newbie on routing questions

  Hello, newbie here in CVP. Got a deployment with UCCE/CVP 9 X and Conn CUCM/Unit 9 X. No Sip Proxy and the current context we have to route calls to CUCM prior routing to ICM/CVP. I know that's not the best Setup, but there is no budget to spend more managers to call for UnityC to CIM at this stage so all calls will be pretty closely from before CUCM hit ICM. That said, I'm getting conflicting information about how to configure routing. Probably more too read things. From my tests, I need 2 PIMS on every PG to cover both CVP servers which means I need 2 labels VRU to account for each customer routing of the CVP (ie. 121212 and 131313)? I have heard however I need one but my call routing will fail if it is not 2. Is this correct? If this is the case, how ICM knows what CVP VRU label to use when a call is initiated of CUCM to ICM? And how is that redundant PVC without proxy SIP or DNS Srv? Any recommendations would be greatly appreciated.

  No, you build the same label for all customers of routing CVP.

  Sent by Cisco Support technique iPhone App

• BlackBerry Smartphones Newbie with 2 questions, need help.

  Hi guys,.

  hope you can help. I recently bought a BB Curve and think it's great.

  However the LED stopped working. I turned off the unit and removed the battery. When I put it in the LED lights up red, so it must work. I checked my profile settings and all say that the LED must be on. I have changed this setting to disabled, backed up, and then put it back on and saved and still no action led.

  The second question is attachments on my emails. I can't open attachments, photos, documents spreadsheets nothing. I use desktop re-Director. Is it possible to have attachments that are sent using this unit or any other bits of software? I have the only BB at work so I'm not so sure, establishment of a BB server is viable.

  Your opinion would be greatly appreciated.

  There is not all the configuration parameters for the Service of the attachment. The following table describes the supported types of attachments on a BlackBerry

  http://www.BlackBerry.com/BTSC/KB03265

  By default the LED flashes green to indicate that you are in a wireless coverage area. I found it annoying and disabled. Check the setting under Options | Screen/keyboard and turn the LED coverage indicator inactive.

• Adobe digital editions permission question - cannot disable 'clear' previous user

  I'm trying to register on a PC that has been used by a previous employee - to access my ebook purchases I have to connect you or allow me to this PC, but I'm unable to erase the previous user authorization

  the error returned is "impossible to clear permission. Please try after some time.

  We have tried several times and attempted to uninstall the software and re - install even

  found this answer on the forum for someone else, it works!

  If for some reason you cannot withdraw the authorization of ADE, follow the steps below:

  Mac: Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.

  ADE will be cancelled now.

  Now allow ADE new.

  Windows:

  Click Start > run.

  Open, type regedit in the text box and press ENTER. The Registry Editor opens.

  In the left pane of the registry editor, find the following registry key:

  HKEY_CURRENT_USER\Software\Adobe\Adept

  Right click on the key to the follower, and then choose Remove.

  In the dialog box confirm the key deletion, click OK.

  Your permission is removed.

  ADE will be cancelled now.

  Now allow ADE new.

  • Re: E_AUTH_BAD_DEVICE_KEY_OR_PKCS12

• Newbie on MemoryStick question

  I am to evaluate vm workstation for our company and have no real experience with vm workstation.

  I'm hosting on windows 7. I created a machine virtual windows XP without any problem at all. Here is the question, when I'm on windows xp and I insert a USB / flash drive, virtual machine software allows me to connect to it and it displays in the status bar, but I can't see or access in the my computer window.  I really need to be able to copy files from the drive flash on windows xp machine... I read everything I could find, and it seems to me it should work... Sorry if this is a stupid question, but can someone tell me what I'm missing?  Thanks for your help!

  Welcome to the forums!  Do you have the VMware Tools installed in the virtual Windows XP machine?  You should be able to drag-and - drop between your Windows 7 host machine and the virtual machine.  You can disable the removable device (USB key) in the virtual machine to the host o/s.  You should then be able to open the drive, and then drag and drop the files / folders to your Windows XP VM.

  Please keep us informed.

  Good luck... Bruce

• Pixel Bender\Extension Permission Question Manager in Windows 7

  Recently, I've migrated to Windows 7 (64-bit) and am running CS4.

  I tried to install the Pixel Bender plugin 64 bit, I downloaded but still get a message in Adobe Extension Manager, which reads:

  "You don't have appropriate permissions to perform this operation. Contact your system administrator to get permission. "

  I'm my own administrator so I don't know what I'm doing wrong. I know there are issues between Adobe and Microsoft, but as with Acrobat isn't a "bypass" until things are sorted?

  Pixel Bender worked very well under Windows XP 32-bit.

  I would be grateful any gudance.

  Thank you.

  Respectfully,.

  BAZ

  Right-click on the plugin Manager shortcut and choose Run as administrator

  then navigate to the installer pixel bender in the extensions Manager

  to install the pixel bender plugin.

  MTSTUNER

• Integration of the EBS - group permission question

  I have installation OBIEE thanks to the integration of the EBS. The part of authentication works very well. I have problems with my group permissions.
  
  I created two responsibilities EBS, groups of RPD and presentation catalog groups with the same exact name:
  -BI administrator
  -BI user
  The BI administrator group has admin access and BI users group has just basic access.
  
  Here is what I noticed:
  1. when a user connects to the EBS and clicks on the responsibility of the administrator of BI, it gets successfully in OBIEE with admin access. If the same user opens a new browser or even using a different computer and selects the user BI, it still gets admin access.
  
  2. I have the Server BI and BI Presentation Server. I use the same user and this time click the BI user first. He gets successfully in OBIEE with basic access. If the same user opens a browser or use another computer and selects the responsibility of BI administrator, it still gets access to basic user.
  
  There is no "Logout" button when you configure the EBS with OBIEE integration. I think the problem is that the group permission is stored in the memory of the server somewhere usually, it gets deleted when the user clicks on logout, but it is not available. Does anyone know how I work around this problem?

  Hello

  to add a logoff link, you can add this entry in your Auth section in instanceconfig.xml file

  http://caeobie03.caecorp.CAE.com:7001/Analytics/saw.dll?logoff

  THX

• Newbie on antenna question

  Hi, I got a 2 x 4402 WLC and 25 x 1242AG TOWER to deploy. None of the ROUND came with the antenna. They are to be deployed in an office environment. The absence of antenna would prevent me from editing above the suspended ceiling, or must they go on the inner walls instead? I could not do a poll on the site but as it is still a construction site.

  Hi Brian,.

  You know, I don't think that there is no 1242 with antennas :(

  «The Cisco Aironet 1240AG series Access Point is a fixed configuration access point, dual band IEEE 802.11a/b/g. built in to the access point are two radio stations, each with * dual diversity antenna connectors.»

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps6521/product_data_sheet0900aecd8031c968.html

  You would need something like the series 1130 (with integrated antenna).

  http://www.Cisco.com/en/us/products/HW/wireless/products_category_buyers_guide.html#http :// www.cisco.com/en/US/products/hw/wireless/products_category_buyers_guide.html

  This does not mean you will need external antennas for use with the 1242.

  I hope this helps!

  Rob

• newbie JDeveloper Setup question

  Hey people.

  I'm a new ISV SE working to familiarize myself with things.

  Environment:

  Windows7 64 bit

  Java version "1.8.0_60".

  Tries to install:

  Installing Oracle JDeveloper Studio

  jdev_suite_121300_win64.exe

  When I run the installer, it dies on the market 'Prepare' with this message:

  java.io.IOException: C:\.oracleprinters\Middleware\Oracle_Home\inventory\Queries\jdkGeneralQueries\12.1.3.0.0\jdkGeneralQueries.jar (the system cannot find the path specified)

  My machine has a C:\.oracleprinters directory, but this subdirectory is not there.

  Advice would be useful?

  
  Carl

  Have you been asked to a Jdev installation folder in?

  You have another installation of Oracle on this pc?

  I never heard of puff, a folder named .oracleprinters, but it can be created by the installer itself. If it is empty, you can remove it and try again.

  Did you start the installer as an administrator?

  Timo

• Newbie on paths question

  Hi all

  Please take a look at the following picture:

  

  I am trying to trace an outline of a banner that oscillates around a cylinder. To do this, I created a path for the cylinder and the other for the banner. I had planned to merge with the pathfinder tool traces when I'm done and cut out the parts that overlap that I don't need. But here's my problem: when I created the closed path from the front of the banner and tried to add a single path (marked in green) I can't join them. This gives an advantage of ugly, overlapping (circled red). I read that it is not possible to reach a path open to a closed point anker. How could I solve this problem?

  All the tips are greatly appreciated.

  belfaser,

  You can select the entire document and in the Contour palette check the round cap and Round join.

  Making nice and consistent angles and ends (if you have Anchor Points correctly on top of each other, of course; The guides are your friends saying: anchor when you drag one to coincide with each other).

• Is it still possible... newbie link/photo question

  I know that I can link something to a whole picture. Is it at all possible to have few links located on different spots of a photo? Someone asks me to do it for our site, but I just can't understand it. I touched only in Dreamweaver and I don't know even where to look in the different help pages! If someone can point me in the right direction, it would be great. If it helps, here is the page that they want me to work this way... http://www.hartleynature.org/ecology/1918.html

  Click on your image, open your properties window, bottom left (I'm in CS3 so yours may be different), look for card.  Click the tool you want to use (oval rectangle or polygon) and bet on the section on the image that you want to link.  You should be able to go from there.

  Gary

• Question on the simulation of 11g

  Forgive this newbie and the question of functionality personally not tested...
  
  I'm looking on simulations and see that I can set a duration for a definition of the simulation. I can give a moment of execution in months, days, hours, minutes and seconds. Everything is good so far. Question is about the use of that time when I run a simulation. Is the "real-time" or is it "simulated"? There are cases where I want to apply the rules of calendar and other factors where to simulate the day simulation time, weeks and confined in the image. I'm hoping to hear that time is "simulated" which means the computer simulation process as quickly as possible. That would allow me to get a simulation time of say 60 minutes done in something less than the current time. Anyone who has experience using simulations can verify that this is the case for me?

  The time is simulated.

  For completeness: you can choose ' run to the end ", where it will finish the simulation in seconds and just show you the results, or you can run the simulation 'normally' where you will see chips running through your process, the size of the queue and all. The time is always simulated, but not as fast.