Newbie here, please, need help from someone.

Similar Questions

• I am very sorry for my experience of care and I need help from someone, because Apple does not seem to do anything.

  Whenever I try to buy anything from iTunes, he told me that my card was declined and I need to update my billing information, but the information is up-to-date and accurate. I tried to access Apple support by all means. I tried the chat system, but was immediately struck with a code error and rerouted. Then I tried to send, but it refused to let me email without an order number, but I can't HAVE a purchase order number if iTunes won't let me make an order! Then I tried to send my number so they could call me, but I got the same error as the chat system code and has been diverted again. Finally I went to the contact section to find a direct number and I called the Apple Media Helpline. Replied to automated email and when I asked to be put through a representative, the message says he understands and was changing me but as soon as he transferred it was yet ANOTHER automated message that just told me to go to the online support page, and then he hung up!

  This is outrageous. How the world am I supposed to get help with anything that either if no support really offer any type of support? The Apple store nearest is 2 hours and I won't make this drive on something that I know can be fixed with a simple phone call.

  I really, really need some help here. Please and thank you.

  What are you trying to use your payment method, credit or debit card? If it is a debit card, not all still seem to be accepted and could not be accepted at all in some countries.

  A card having a chance to be accepted it must be registered with the same name and address (including the format and spacing etc) that you have on your iTunes account and have been issued by a bank in the country where you are (and therefore the country on your iTunes account). If your card is then you have checked with the card issuer to see if they are down for use with iTunes? If they are not then you have another card you could try? Or though iTunes gift cards available in your country so that you can use them as payment?

• Newbie here. Need help finding a good tutorial

  Hi all
  I'll try to find a good tutorial how to make ajax enebled search form
  I want to do is to have a search with drop down form lists but only the content of the first descent down will be static, everything else will be dynamic based on the item selected from the previous drop-down list. IE, I select a country first descent to the bottom of the list, and when I select the country from the drop-down list city filled with the list of the cities in this country, executing "select cityID, cityName of cities, including the country ==" + theSelectedItem + ""
  
  Thank you
  
  I'm using JDevoloper 11 g

  Two things to look at:
  Navigation list: http://blogs.oracle.com/shay/2008/11/the_navigation_list_select_som.html
  LOVs of load: http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/adfbc_new_features/adfbc.html#t2

• I started my system, unfortunately I forgot to backup all bookmarks on firefox, how could I get these bookmarks in firefox need help from your server

  Hi, friends
  I started my system, unfortunately I forgot to backup all bookmarks on Firefox, now how do I get these bookmarks in Firefox need help from your server

  Start or restart to activate something, or restart.

  Did you format your hard drive or re-install Windows?

  If you did a reinstall of Windows, look for a folder.
  It can be called old windows. Check the instructions that you were given.

• Infected Winlogon.exe and explorer.exe accidentally deleted on XP Pro PC - need help from recovery console

  Hello

  Windows XP Pro SP3 Dell Optiplex and been infected by Trojan in winlogon exe files and Explorer. AVG asked me if I wanted to force deletion and I foolishly agreed. Now, I get the BSOD and the message 'Windows logon done unexpectedly '.   It is a work PC and the CD only we have is the Dell CD to re - install and I know that I need as the first step recovery console. I don't know if the recovery console is on it, and then I need help for the uncomprressed explorer.ex_ and winlogon.ex_ and in their right place.

  I'm not a total newbie, but it's been some time that I used the recovery console.

  Help?  Thanks in advance and greetings to all

  Morey

  Try to be more specific with the error messages you see, so it does not guess or try things.

  Here is an example of a popular error message that sounds like yours (maybe):

  STOP: c000021a {fatal system error}
  The Windows logon process ended unexpectedly with the status of 0xc0000034 (0 x 0000000 0000000 x 0).
  The system has been shut down.

  What exactly tell your message?

  There should be copies of XP system files backup all critical already on your hard drive in the windows\system32\dllcache folder (it is this case), you may not need any expansion.

  I would like to see the exact error message, make a CD bootable Recovery Console, run chkdsk/r even if he doesn't find anything to do and then see the replacement of missing persons or suspicious files, either by copying it in the backup copies of replacement of the recovery, or from another CD Console, you can do if the Recovery Console gives you a hard time (first do the CD Recovery Console).

  First of all, you need to start on something...

  You can do a restore bootable XP CD as follows:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

  I was faced with a clean install of windows 7 on my laptop for 2 days now. I'm going to sleep after I post this so feel free to help others who are online, but if no one else needs help I have little material ID's which need pilots. I would be very grateful, because it is the last step, I need to finish my installation.
  
  Ethernet controller:
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C & REV_0A
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D31 & CC_118000
  PCI\VEN_8086 & DEV_9D31 & CC_1180
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C & REV_08
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_1903 & CC_118000
  PCI\VEN_8086 & DEV_1903 & CC_1180
  
  PCI device
  
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C & REV_01
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_522A & CC_FF0000
  PCI\VEN_10EC & DEV_522A & CC_FF00
  
  PCI memory controller
  
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D21 & CC_058000
  PCI\VEN_8086 & DEV_9D21 & CC_0580
  
  PCI simple communication controller
  
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D3A & CC_078000
  PCI\VEN_8086 & DEV_9D3A & CC_0780
  
  SM bus controller
  
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D23 & CC_0C0500
  PCI\VEN_8086 & DEV_9D23 & CC_0C05
  
  It is the last of the drivers I need. It was certainly a pain get here without any connectivity USB wireless drivers as well as figuring out how to attach the USB 3.0 drivers to my installer of windows 7, but it's in the past now. Thank you much in advance.

  Hello:

  You can use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

  The drivers you need for the ID you posted in the order that you posted the...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71191.exe

  ICP data and acquisition and signal processing controller x 2:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp71189.exe

  PCI memory controller?  Don't know. Can be installed from below driver chipset.

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71183.exe

  SM bus controller: Note: install first this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp73543.exe

• Desperately need help from chat session - site keeps browsing me page "need help, we need more information.

  I want to deactivate CS3 via chat, because it has been installed on a PC that has crashed and cannot be turned off as usual.  When I try to get from adobe to give me a "Start chat" button, it doesn't make me go through the product screens you have - what you're doing with it.  I tried eight different ways to get a chat session going, and no matter where I start, it keeps me taking back on it tell us what you have and what you want with this page.  If someone has a link "start chat", I would be grateful to have.  Thank you

  You're not likely to find staff chat service, until the long weekend passes.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Please need help for UPGRADING

  Hi all

  I'm doing a simple UPDATE and I get the following error "ORA-01732: non-legal data manipulation operation on this point of view." I removed the substr and tried and always had the same error:

  My UPDATE statement:

  UPDATE

  (SELECT DISTINCT T1.*

  FROM TABLE1, TABLE2 T2 T1

  WHERE T1.SR_NUMBER = T2.SR_NUMBER

  AND T2. TREATMENT = 'Y '.

  AND T1.IS_UPDATE = 'F'

  AND T1. CLOSED IS NULL

  and substr (t1.sr_number, 1, 2) = '1'-

  )

  SET DATE_DE_MODIFICATION = SYSDATE,

  CLOSED = SYSDATE,

  STATUS = "closed."

  DATE_OF_TRANSFER = SYSDATE,

  IS_UPDATE = 'T.',

  SUCCESS = 'N'

  where rownum < = 500

  Please need some suggestions.

  Thank you

  2932016 wrote:

  Thanks John,

  The UPDATE did not work. I update the table TABLE1 can have multiple lines with the same SR_NUMBER, where as the TABLE2 SR_NUMBER has only one and that's the reason why I join me in the first place.

  What do you think average surroundings did not work?

  The fact that table1 can have several lines with the same sr_number is not material, only this table2 has one line for each value of sr_number.  If sr_number is not declared as unique then you cannot update the join, however, if you know that it is unique, so you can update as I previously suggested.  In a simplified test case, I did:

  create table table1)

  sr_number varchar2 (10),

  closing date,

  is_update varchar2 (1));

  create the table2 table)

  sr_number varchar2 (10),

  VARCHAR2 (1)) transformed;

  Then filled two tables giving:

  SQL > select * from table1;

  CLOSED SR_NUMBER I HAVE

  ---------- ----------- -

  1-001 JANUARY 1ST 2016 T

  1 001 F

  1-002 F

  1-002 F

  1-003 F

  2-004 F

  SQL > select * from table2;

  SR_NUMBER P

  ---------- -

  Y 1-001

  Y 1-002

  N 1-003

  2-004 Y

  Do an update that is similar to what I suggested earlier:

  SQL > update table1

  2 set closed = sysdate,

  3 't =' is_update

  4 where sr_number in (select sr_number

  5 from table2

  6 where changed = 'Y') and

  7 is_update = 'F' and

  8 closed is zero and

  substr (sr_number, 1, 2) 9 = '1'-;

  3 lines to date.

  SQL > select * from table1;

  CLOSED SR_NUMBER I HAVE

  ---------- ----------- -

  1-001 JANUARY 1ST 2016 T

  1-001 23 JANUARY 2016 T

  1-002 23 JANUARY 2016 T

  1-002 23 JANUARY 2016 T

  1-003 F

  2-004 F

  SQL > rollback;

  Complete restoration.

  Which seems to be what you are looking for, unless I'm missing something.

  Without the unique statement on the table2 the join is not editable:

  SQL > update (select t1.*

  2 from table1, table2 t2 t1

  3 where t1.sr_number = t2.sr_number

  4 and t2.processed = 'Y'

  5 and t1.is_update = 'F'

  6 and t1.closed is set to null

  7 and substr (t1.sr_number, 1, 2) = '1'-)

  8 the value closed = sysdate,.

  9 = 't' is_update;

  the value closed = sysdate,

  *

  ERROR on line 8:

  ORA-01779: cannot modify a column that is mapped to a table not preserved key

  By adding a unique to table2 constraint, the view of join becomes editable:

  SQL > alter table table2 add constraint table2_uk unique (sr_number);

  Modified table.

  SQL > update (select t1.*

  2 from table1, table2 t2 t1

  3 where t1.sr_number = t2.sr_number

  4 and t2.processed = 'Y'

  5 and t1.is_update = 'F'

  6 and t1.closed is set to null

  7 and substr (t1.sr_number, 1, 2) = '1'-)

  8 the value closed = sysdate,.

  9 = 't' is_update;

  3 lines to date.

  SQL > select * from table1;

  CLOSED SR_NUMBER I HAVE

  ---------- ----------- -

  1-001 JANUARY 1ST 2016 T

  1-001 23 JANUARY 2016 T

  1-002 23 JANUARY 2016 T

  1-002 23 JANUARY 2016 T

  1-003 F

  2-004 F

  SQL > rollback;

  Complete restoration.

  However, adding the separate your validated statement gives:

  SQL > update select (distinct t1.*

  2 from table1, table2 t2 t1

  3 where t1.sr_number = t2.sr_number

  4 and t2.processed = 'Y'

  5 and t1.is_update = 'F'

  6 and t1.closed is set to null

  7 and substr (t1.sr_number, 1, 2) = '1'-)

  8 the value closed = sysdate,.

  9 = 't' is_update

  10.

  Update select (distinct t1.*

  *

  ERROR on line 1:

  ORA-01732: operation non-legal data manipulation on this point of view

  John

• Hey guys new here and need help guy how to turn on my CS2 after 30 days grace. It's an older version, I bought new off Ebay and I tried all online and phone nothing has worked and now it does not open?

  need help with an old version of CS and I tried to active several times in 30 days and it don't work and now it will not open now help please!

  CS2 (or earlier version) software activation server replacement

  NOTE that CS2 will not install on a Mac "modern."

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Please, need help printer. Nothing to do with Security Update 2009-001.

  I need help, and looking for the forums just makes me worse headache. I need to use passthrough printing, but the Mac printer does not in the comments.

  Details: OS X 10.5.6 Fusion 2.0.2. Guest is Windows 2000 SP4. Security Update 2009 - 001 has not been applied.

  The printer is a HP PhotoSmart C4480 printer attached to the Mac via USB.

  In order to avoid the obvious questions:

  Passthrough fusion printer is active. Become disabled as some users report. The Serial Port is present and connected. In OS X printer sharing is enabled in the world and for this printer (but my impression is that it should not be).

  I confirmed that the printer works from OS X. And he is listed in the merger USB menu.

  The process of Thinprint TPAutoConn * are underway on the guest. COM1 and COM2 are both present.

  The user can not use the old printer sharing solution because there is no Windows 2000 for this printer drivers. The VM is totally dependent on the system of Thinprint, and I never put in place before. Have never seen a working configuration. Don't know about its configuration beyond what is in the VMX file and upgrade manual.

  There are merger Console messages that say "no printer configured or unavailable." I think it's the key to the problem... but I don't know what to do about this.

  Help...

  Fuzzy-wan says:

  Pat Lee says:

  We have designed this feature to Windows XP and later versions. So it will not work on Windows 2000.

  Hmmm. Woody didn't say exactly if the printer actually prints

  Well I wouldn't went all the trouble to clean the building a Machine virtual Windows 2000 Pro SP4 with VMware Tools installed and printers enabled for the Virtual Machine settings and took all the dialog boxes and to make a film of the if I did had not bother to actually check and see if she would print!

  Find attached an image of a Windows 2000 printer print Test and note the relevant information.

  Computer name: W2KVM

  Name of the printer: HP LaserJet 4050 on MacBook Pro

  Printer model: TP output gateway PS

  Support: Yes

  Port name (s): THIRD:

  Note: because the printer is a B & W LaserJet I guess that the "support: Yes", it's that the "printer model: TP output gateway PS ' supports color and will therefore work with color printers as well.

• Need help from Windows Vista Home Prenium COmpaq CQ6-420 us

  I need help my laptop has only 1 year and the hard drive that came with it is a failure and the warranty is over, I need help

  Buy a new hard drive and reinstall Vista.

  How to get the recovery media Vista to make it back to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recoveryin case of hard drive failure or System Crash.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help from a staff Adobe on account membership

  Two memberships (complete creative cloud) went within one account. I need help of a staff of Adobe to transfer one of them to another account.

  Thank you.

  Robert Abrigo

  Post edited by: a TechOneGlobal

  Use the Chat support - for the still need help, click the link below? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Newbie here and need some clarification. Help, please.

  Hello! You just bought a Z2 of Australia and I was wondering because there are features Telstra inside the phone. In addition, each time I have disable on my Xperia, aTelstra logo on my screen. Is this normal? Have I not the same device of Z2? Because I thought that it has been tampered or something. I do not know. You guys might want to clarify this for me? Thank you, much appreciated!

  They should not however the perhaps pre-installed applications of no use to you then as above you can manually Flash your phone to a firmware genericv see here for more information on how to flash (ignore the title it's process, you must follow and download Flashtools preparation) and here for firmwares - make sure you download the right for your model number of the device - check settings then phone search D65xx

  There is a generic version of D6503 Austrailian

  17.1.A.2.55
  Australia - unbranded - 1281-9715

  Edit it is also a firmware Telstra and Vodafone D6503 available for download here

• Pavilion 231014: need help from ERD com.

  We must use the repair disk to see if it will be useful.  The computer is current on and has different problems.  The info on the drive says press any key to start the computer from the system repair disc if you are prompted.  If the computer is not configured to boot from a dvd, see the documentation provided with the model.  He said that we had to change the settings of the Bio.  Can someone tell me how to make or that one to check.  It is an hP printer in a pavillion intel 64-bit model # 231014 running win 7 home premium, I hope you can help.  Thank you joyce 737

  Hi @joyce71937,

  Welcome to the Forums of HP Support! I understand that you are looking for help on how to enter the BIOS settings to set the CD/DVD drive as a boot device. I'm happy to help you.

  In case they are needed, here are the documents on how to make a reovery system to the factory, assuming that you have a backup partition or image of the resumption of the work of recovery.  In response to your original question on access to BIOS, I also pulled a second link on troubleshooting article and copied below (with a slight change, also in parentheses).
  Performing a recovery of system HP (Windows 7)
  Troubleshooting problems of recovery HP System (Windows 7)

  Access to the BIOS/change boot order:

  If the CD/DVD drive cannot read recovery (or fix) drives and no error appears, the disc may be scratched, dirty or defective. In addition, the firmware of the drive may need to be updated to account for new disk media.

   

• BlackBerry Smartphones NEWBIE THATS has NEED HELP (wiping Blueberry)

  First of all let me say hi to everyone and now my problem

  OK you all think im a complete wazzuk

  IM new blackberry (no idea) they gave me a 8800 which came with disks

  but I was told that I can dl on this site, which I did... the last application office

  in any case... He told me that I need to update my phone and as a * beep * I pressed next

  at halfway through the eraseing and download from my pc came with an ERROR

  and now im left with just a white screen with a small box in the middle and a cross going through it

  can some 1 Please tell me I can fix and how or have I just broke the thing forever

  Ive looked on the pc to see if it had backed up the device (which I don't think he was)

  so there must be a way I can download a new os on blackberry

  Please can any 1 help

  Thanks in advance

  Is your exact model the 8800?

  The installation of the operating system is in the link below and good instructions.

  http://www.BlackBerryForums.com/General-8800-Series-discussion/183426-latest-OS-8800-4-5-0-203-4-5-0...

  Follow the signs to the point.

  If you have a problem connecting to the BlackBerry:

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe