Newport ESP300 GPIB communication stops after query

Similar Questions

• The slide show feature does not work when I used my Apple TV new 4th gen. I have all the minimum requirements for Macbook and Macbook OSX the Airport express. The slide show starts and stops after that 7 photos are displayed on the TV. If I change the

  The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store

  Welcome to the Apple community.

  After returning, I'm not really clear on what your question.

• Remote Desktop connects then stops after a few seconds

  I have two laptops to Windows 7.  We run OpenVPN which I will refer to the VPN server.  The other is the Client and with me on trips.  Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems.  I also have an Open VPN Client with another port configured on a server QNAS.  I can connect without any problems.

  I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS.  I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.

  I have a router TP-Link-ER-6120.  I can configure the three ports to run in 3 separate VLANS.  When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP).  However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password.  I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons.  Then it crashes.  If he does until I can see the desktop, it automatically attempts to reconnect.  If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.

  If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network.  If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above.  I also have a QNAS on my network with OpenVPN configured and operational.  If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.

  Thus, work Desktop connections to local computers.

  However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.

  -J' I ping the VPN server during connection attempts and never lose the connection.

  -J' used telnet to Server VPN 3389 port and it connects.

  -J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both.  And then disabled Windows Firewall as well and still no joy.

  Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?

  Is it maybe a configuration problem on the side of the router?  Installation side route is a very simple graphic interface.  I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server.  I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.

  Miss me probably something simple, but it launched my ass for weeks now.

  Any ideas?

  Hello Michael,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.

  Certainly, I understand your concern and will try my best to help you.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• ISA 550W: Youtube streaming stops after a few seconds

  Since I installed the ISA 550W, Youtube videos stop after a few seconds. It happens on all my devices: Windows 8, Samsung Smart TV, Android, Windows Phone...

  I have the lates firmware.

  This problem doesn't happen with the other streaming like DailyMotion site.

  I disabled HTTP antivirus but it changed nothing. Web browsing is faster.

  Application control is not enabled.

  Any idea? Thanks in advance.

  Have you tried turning off all other security settings (i.e. an IP)?

  Have you tried to return to the previous firmware to see if the problem persists?

  Shawn Eftink
  CCNA/CCDA

  Please note all useful messages and mark the correct answers to help others looking for solutions in the community.

• move to the current record after query execution

  Hi all
  
  I have a form where I can list all the jobs of the db that can start or stop.
  
  For more details, form has columns jobs, the current situation of db, action (drop-down start/stop)
  
  The user will see list of works on the screen and it goes directly at a check-in and departure (submit) work using drop-down for this record.
  
  Once they start and stop work, run query goes off to show the current state of employment.
  
  Now goes to my requirement, after the query is run, I want to go to the (employment) record that the user has begun the work.
  
  Currently, the cursor goes to the first record.
  
  Is there any oracle 10g AS property where I can get the current record, put it in setting and go to this record after having run query?
  
  Is there another way?
  
  Kind regards
  Leonard

  Hello

  If you are sure that the record after motion will keep the same position, you can before, store the current record in a variable number with Get_Block_Property (CURRENT_RECORD) integrated, then after query, use Go_Record() with the variable number stored in the parameter.

  If you think that, after re - question registration number can change, you need to browse your recordings in a loop, then stop navidation while you find the corresponding key.

  François

• IPod touch sound stops after 10 seconds to watch the video of youtube

  IPod Touch 9.3.2 volume stops after 10 seconds while watching a YOUTUBE video. Continue to play video.

  This happen using the YouTube app?

  Or by using the YouTube site?

  Try it otherwise.

• OS stops after an hour - is - it a solution?

  No matter what I do, OS X (El Capitan) stops after one hour of inactivity. I tried everything in the 'Préférences' window, nothing will do. Anyone know how to solve the problem?

  to do this

  Reset the management system (SCM) controller on your Mac - Apple Support

• Satellite Pro U200 starts after some time it stops after 5 minutes

  Satellite Pro U200 stops after 5 minutes, then starts after some time. When she stops the
  blue screen say - stop: (0x0000008e, 0xaa846f58, 0xa9f29808, 0x00000000)

  Sysaudio.sys - address aa846f58 base at aa843000, datestamp 41107f1a

  Hello

  Believe me; It's not easy to say exactly why the BSOD appears.
  It usually happens because of a malfunction or severe software hardware fault.
  Have you used the operating system of the image of Toshiba?
  Message it says something about sysaudio.sys.
  This file is a system audio WDM filter processes and it s a part of the Windows operating system. It controls the material such as the printer or the graphics card at a lower level.

  Note: The virus uses these files as a camouflage. You should always use an anti virus application.

  In addition, you suggested that the laptop stops after 5 min.
  Well, this looks like an overheating problem. How did you use the laptop? You know that free space around the laptop is very important due to the circulation of air. Fans should also be free.

  I you use Notepad in the right position and it happen, so I recommend asking for help Toshiba service partner. They should check the laptop.

• Tecra 9100 stopped after one hour of work

  I bought a Tecra 9100 and he stopped after an hour of work or less like frozen.
  Using the keyboard or the mouse to restart did not work.
  I have to use the power button to shut down and restart after stop down.
  I tried to reinstall windows xp and change the ram, but still the same problem.

  Thank you very much!!

  Hello

  How long have you used the laptop?
  Eventually the temperature inside the laptop could be responsible for these issues of freezing. A similar problem occurred on my laptop. He frisottés due to overheating.
  I just cleaned the fans and cooling grids modules with the vacuum cleaner and the problem disappeared.

  I think you should also check the cooling modules and try to clean it carefully.

• The fan stops after the Satellite U500 - 10Jwas turn

  Hello! I need help!

  The fan stops after turn backwards to laptop my laptop Toshiba gives me the warning "a problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  The fan works for several minutes and stops.

  I clean all the dust, I do not have anything with the hardware and software.
  What the reason for this?

  Hello

  What model of laptop do you have exactly?
  It looks like a cooling module problem for met.

  I think it needs to be replaced and this can be done by Toshiba service in your country.

• I can't the new 9.3 iOS to load. Stops after verification. Says he has no Internet, but it does.

  I can't the new 9.3 iOS to load. Stops after verification. Says he has no Internet, but it does.

  Never had this problem with the latest updates!

  Apple released the update iOS 9.3 for some devices (air of iPad and previous iPhone, 5 s and previous) due to problems with activation. You may not be updated until a patch is issued. I recommend to wait for some time (days?) before trying again.

  See this article for more details.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  This article summarizes some of the problems with the update

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• Can not recover my A30 - stops after only 3%!

  Hello

  I turned on my A30 someday to be greeted by nothing more than a black screen. !!!
  I thought I would just use the re recovery disc start the system. I'm not bothered about formatting the drive as long as I'm back windows. Anyway, responsible for the program of restoration of Toshiba and he began to find it stops after 3%!

  And reads an error message on the screen black, just so that you know is not that I was being impatient, I waited 35 minutes for 3%. I can't understand how to get around this problem. Do I need a disc of Windows XP 'official' home edition of windows to repair? Any help that anyone can provide would be greatly appreciated!

  Hi Frank,.

  I think that your hard drive may have failed. Unfortunately, the recovery CD Toshiba you tried is that used to reinstall your operating system and reformat your hard disk. If this process has started and then stuck at 3%, then chances are you erased what was originally on your hard drive and the process of re - install then had problems to restore the operating system.

  I suggest that you try to boot from the recovery again CD and look at messages and guests you get.

  Depending on the age of your laptop, you can still be covered by the warranty in this case, you can check with an authorized Service partner.

  Kind regards

• Toshiba 32RL938F: MP4 playback stops after 2 h 6 min

  Hello world

  for the first time here and I'm subscribed to this forum just for the record I have a problem to read the files of my MP4 with an external hard drive. A single video file just stopped after 2 hours and 6 minutes (and it lasted over 2 hours and 50 minutes).

  I tried to read these files on my computer and there is no problem at all.

  Can you help me?
  Thank you.

  Here is the link to the result of the [Journal of MediaInfo | http://pastebin.com/NJSx4Msx] of one of my files

  This happens with all mp4 files that are longer than 2 h 6 min?
  I mean would that be a codec problem?

  Would be interesting to know if this occurs by using different mp4

• Satellite Pro A10 stops after 15 minutes of internet games

  Hello
  When I play games on the internet such as zuma, scherwoods my laptop sat pro A10 stops after 15 min of game
  When I start my laptop it read disk
  What can do what
  [email protected]

  Hello

  I think overheating is the problem. First of all, you can try is to clean the machine properly. I guess the CPU and graphics card works very intensive and produce a lot of heat. If the equipment cannot be cooled properly the laptop stops suddenly.

  Clean it up.

• Re: Satellite A105 stops after 60 seconds (NOT a heat problem)

  Satellite A105-s4344 stops after EXACTLY 60 seconds. The mobo was removed from bevels and all devices removed unnecessary (DVD, HDD, WiFI etc.). Swapped CPU and RAM with those well known. AC adapter / CC exchanged and battery by the well known. Does the same on the AC or DC inputs only.

  I have not yet flashed the BIOS (at 60 seconds, that would be silly). But, I'm looking to replace or flashing with an EEPROM burner. Currently has V 2.0

  I don't know what heat genration detection using this system, but it is a possible cause if it is one of the later generations (visit http://www.topbits.com/how-to-monitor-cpu-temperature.html if you don't know that I'm referring to).

  Before reballing North and South of the bridge and flashing, I thought that I would get feedback from you folks. Just to cover all bases ;)

  P.S. the first person to ask what OS I use will get an instant ticket to the bottom of my list of respect.

  > P.S. the first person to ask what OS I use will get an instant ticket to the bottom of my list of respect.
  :) :) :) Best thing I've seen in this forum.

  Back to your problem.
  I'm not a technician but this is just my opinion on all of this. The fact is that after your laptop on CPU switch in seconds only reaches very high temperatures. You can turn on your laptop and just enter the BIOS settings and the same should happen again.

  I can't say for sure if it's 100% thermal or not question but what else can be responsible for decommissioning? CPU will be warm in just a few seconds. Significant change structure with temperature change and I can only imagine a contact will be interrupted.

  On this forum, we have had many reports similar as when portable cold starts and works well, but after that little time is off without reason. Maybe I'm wrong, but to me it sounds like heat or deliver bad contacts. Let's see what other people have to say about it.