Nightmare of Tecra 9100 Bluetooth stack

Downloaded the last battery bluetooth but keep receiving error message when you try to open the Bluetooth settings

TosBtMng.ese - Entry Point not found

The procedure entry point? BdbtNotifyEx2@@YAHPAXIQAXQAHPAUHWND__@@II@Z cound not found in dynamic link TosBdAPI.dll library.

Can someone help me I've been until 03:00 last two nights on the trot trying to settle this. I have installed and re installed about 10 times had installed and the opening last night, but once done the pairing and connection to the internet has tried the laptop broke. I can't believe how frustrating it is.

What operating system do you use?
Installation successful (check the Device Manager if everything that looks good)?
What type of connection you have configured (DUN, PAN,...)?
Which device Bluetooth have you tried to connect (mobile phone, access point,...)?
You have run a virus scan on your system? It seems that something is damaged.

Tags: Toshiba

Similar Questions

  • Tecra M3 - Bluetooth Stack versus Bluetooth Monitor?

    Previously, had a Tecra 9000 and never got bluetooth works smoothly and seem to have the same problem with nine Tecra M3... (maybe its me!)

    I checked and updated all the drivers downloads and had problems to any Bluetooth (M3 for IPAQ 3970). Found out that if you uninstall Bluetooth Stack and reinstall it the battery but do NOT install Bluetooth Monitor, everything seems to work (as far as I know). Prices Bluetooth Stack Bluetooth Monitor alternative (the installation guide does not suggest it)?

    Thank you all

    JonBer

    Hello JohnBer

    The only thing I can tell you about Bluetooth technology, it's that I use Bluetooth Toshiba Stack to connect to my mobile phone from Siemens. I sometimes use it as modem to check mail short and fast. I have no problem and the connection is fine. I use the wizard of a mobile phone is always properly recognized and I can use it without problem.

    If you have some problems to make the connection between your device and some external device, it can be caused by some false setting. To make good configuration between laptop and mobile phone was not easy. As I said to check all the Bluetooth settings on both units.

  • Tecra 9100 bluetooth and Samsung SGH-D500

    Hello!

    I have some trouble getting my Tecra to send files to my SGH-D500 using software of Samsung's PIM & file manager.

    The app does not see the BT's COM port, it offers only IRDA as a configuration option.

    However, another software connects to the phone OK, so I guess that it is a problem of compatibility between soft Samsung and battery Toshiba BT.

    Toshiba Z500 or D600 procedures did not help.

    Everything works OK with widcomm BT stack.

    Can anyone help?

    Thank you!!

    Hello

    Sorry, but if you use a non-Toshiba software you must check if Samsung support can help you. I have mobile phone Motorola have and transfer of data with battery Toshiba BT is successfully in both directions.

    Good bye

  • Tecra 9100: Wireless / Bluetooth Switch

    I have the above and when I press Fn + F8 I get a message on the screen.

    "Wireless is disabled. Please activate the wireless communication switch. »

    When I try and install the Bluetooth stack drivers I get as much as the driver Bluetooth installation... screen and after a bit of activity of the HD, I get a pop-up message.

    "Couldn't turn on Bluetooth monitor. Please activate the Communication of wireless switch located on the side of the main unit. »

    I think that there is a problem with the switch on the front of the laptop. I that reason for my guess. Is - fixable. Can I fix it myself. Other ideas.

    Thank you

    Hmm, don t think that the switch is the reason for this notification message.
    Did you check if the laptop supports Wlan and BT maps?

    To my knowledge, the two cards (WLan & BT) are optional on this Tecra 9100!
    I think that you should first check this! Have a look in Device Manager

  • Card 3G and Bluetooth stack question - tecra M4

    I'm having a problem getting a 3G vodafone card to work with a Toshiba Tecra M4.

    The problem is that the card won't install properly on this laptop (with exclamation point appears in the Device Manager and additional ports appear under "ports", but none regarding 3G card - it should be two features of card 3G appearing in the section "ports" in the Device Manager - at least there on the Portege) card works fine on a Toshiba Portege.

    The advice I received from the supplier was to disable the bluetooth card in the Device Manager, and then uninstall the Toshiba Bluetooth stack, then delete Vodafone software, reboot, and reinstall the Vodafone software. Finally to reinstall the bluetooth stack.

    I followed these instructions and everything seemed ok (this appararurent device to be picked up correctly in Device Manager) until I reinstalled the battery bluetooth how I was in the box start.

    Is this a known issue with Toshiba Tecras and you know any solution?

    Hello

    As far as I know that there is a new update for Toshiba Bluetooth Stack version 4.00.23
    I recommend you to test. Perhaps the new version solves the problem.

    In addition, you can visit this Web of Toshiba Bluetooth site:
    http://APS.toshiba-tro.de/Bluetooth/

    You will find a contact form to get in touch with Toshiba Bluetooth support.
    There you can descript comments.

    Good bye

  • Conflict between Toshiba Bluetooth Stack and drawers of power on Tecra M5

    There seems to be a bug in TosBtShell.dll and hope this alert could get fixed in a future revision. Possibly it will save others the effort that it has cost me to track down the problem on my Tecra M5 new. I had to give up Toshiba Bluetooth Stack and now using XP SP2.

    When the Bluetooth Manager is running, TosBtShell.dll updates the element ' Bluetooth' beside ' send to ' in the context menu of files and folders. Unfortunately it is in conflict with the shell software improvement Power drawers http://www.dynamickarma.com/powerdrawers.htm that I defer to speed up access to my files on the computer. This software allows you to right click on a folder to view its contents in a list. Then you mouse to any folder in the list and give him also as a sublist - and so forth as deeply as you want until you reach the folder or file you want. Right click on an item in the waterfall and you get a list of useful options. However, if the Bluetooth Manager is running when you do the right click, power drawers breaks down and you must close and re-open explorer.exe to recover.

    The conflict stops if you remove "to Bluetooth" in the context menu of files and folders. I proved this by using ShellExView from Nirsoft http://www.nirsoft.net/utils/shexview.html to disable the registry key "Bluetooth File extension" [sic]. This key is associated with the C:\WINDOWS\system32\TosBtShell.dll and the CLSID {6BEF3D0B-53F0-4b0d-B91C-C19ED3D4C9D1}. Unfortunately the registry key back again every time that you restart the Bluetooth Manager.

    David Tong.

    Hello

    Thanks for the information.
    However, on the Toshiba Bluetooth page you can always notice whether or not the new version of the driver BT is available.
    http://APS.toshiba-tro.de/Bluetooth/

    I recommend you to visit this site regularly

  • Tecra 9100 find address mobile phone but don't then pair with it

    I had problems with my laptop built in bluetooth. All I want to do is simply send files from my laptop to my phone via bluetooth. However, this has become a very frustrating task. Battery bluetooth (V1.2) software that originally came with my Tecra 9100 laptop was completely useless - there not even "light" even know I clearly choose the Activate button.

    I messed around with the options and nothing worked so never wholesale, so I downloaded 5.4 or anything on the Toshiba site and uninstalled v1.2 (should I have?). Finally, when I searched for devices, an address has shown (address of my mobile I think) so I chose
    address and push next. 'Connection... '. ""Unable to connect to service"(or something like that). Why can it not pair with my phone? That is the question.

    PS when I search my phone devices, my computer name appears but when I select it it says that it cannot match. Help! Oh and I just uninstalled Bluetooth Stack everything it is called because it's useless! :(

    If you want to send files to your mobile phone. Some phones don't support FTP. This means that you cannot send multiple files at the same time. You must use the Object Push function in this case, because this function (profile) is supported by most of BT Mobile phones.

    You can try the following. --> Mouse-right click on the Bluetooth icon in systray-> Bluetooth information interchange-> Bluetooth-> Device Discovery-> Object Push drag and drop a file that will be sent to your listed phone icon. Check your mobile phone which will ask you a dispatch confirmation.

  • Profile of helmet in the Toshiba Bluetooth stack?

    Hello.

    While trying to connect my headset Motorola HS820 Blutooth on my laptop Toshiba Tecra M1, the laptop will only recognize the "Serial Port profile" headset and not the "Headset Profile.

    I'm under that Windows XP with the newest Toshiba Bluetooth Stack installed (bltstk-s-p20-30012-.zip)

    'Toshiba Blutooth utility Guide' don't mention that not the profile "headset" as one of the profiles taken in charge.

    Does anyone know if the headset profile is supported or if the Bluetooth Audio devices will be supported in the future?

    Is there a new stack of Blutooth? Where can I get?

    Thank you.
    Best regards
    Rui Cunha.

    Hello Rui

    Unfortunately I can't give you a good answer, but you can consult the website of Toshiba Bluetooth under http://aps.toshiba-tro.de/bluetooth/.
    Also check this http://aps.toshiba-tro.de/bluetooth/pages/faq/headsetnotworking.html.

    Good bye

  • TECRA 9100 - loss of sound, WLAN, BT, and SD function

    Hello

    during the operation of a USB - HDD and mp3 player on my Tecra 9100, abruptly stopped, power to the WLAN-, Sound-, Bluetooth, SD - Card.
    For example: no sound microphone, WLAN switch does not work, reports of Bluetooth: no power supply.

    On this issue, I heard more often in some forums. My warranty has expired. Regular service is more expensive than a Tecra 9100 of second hand.

    Can anyone give some advice? Which piece can be damaged, motherboard, I I/O-board?

    Post edited by: apco

    It sounds really bad.
    As far as I know there is only one Board and if something is wrong with a part of the motherboard only management as a whole must be replaced!
    As you have already said this replacement is not very cheap, because the jury is one of the expansive laptop parts.

    Without diagnostic tests, no one will be able to provide a just and final diagnosis.
    That's why I recommend you contact a technician from laptop to a cheque

    After these checks you can find out more details on the breakdown and could decide what you what to do; buy a second hand laptop or try to repair the old Tecra

    Good luck

  • Tecra 9100: Delayed write failed - hard drives on their way?

    Hello again,

    I am a member of the Club feared messages error "delayed write failed" and some of that my hard drives are to blame.

    These errors pop - up when a large enough facility is in place, or whenever my system is written something great for my hard drives (which I might have to wait a while to complete). It happened before installing the battery Bluetooth Toshiba. My laptop has finally frozen during installation and all I could do was to move the cursor. 30 minutes in the installation, I get several of these stupid error messages. They say ' delayed write failed - file C:/xxxxx/xxx/xxxx was not justified perhaps due to a connection or hardware problem "(or something like that). When the message window there is almost no way to escape in out makes a power off. But when I turn on the back, I get the blue screen of death that checks my record of inconsistencies. It is very annoying and disturbing because it means probably that my hard drives should be cracking up.

    After doing the search several times on the issue, I know it's my hard drives fault for sure. I have two hard drives; They both give me error messages. They must be on their way, after all I bought this 2nd hand computer laptop and they made noises strange "at delay." Recently, I noticed once they made a "beep" "beep". Never heard before so it cannot be good.

    In any case, I think that I need new hard drives. Can someone recommend me one or two who are used to give me these error messages (and are relatively cheap at least 30 GB)? Thank you

    P.S when I opened the PC health since the Toshiba Management Console it says '' drive S.M.A.R.T (disk 0) may fail soon. '' Ouch.

    Hello

    Each HARD disk with adequate material specifications may work on the Tecra 9100.
    The HARD drive should support an interface IDE (ATA-5) and should not be larger than 60 GB.
    I'm sure that BIOS Tecra 9100 will support 30 GB, 40 GB and perhaps also the 60 GB.
    But the larger sizes of HARD drive might not be recognized by the BIOS correctly.

    By the way; You can make a call to the Toshiba authorized service provider in your country and could order the compatible HARD drive.
    In this case, you will be sure that the drive is supported and runs without any problem to 100%.

  • Tecra M9 - Bluetooth, problem with mobile ' phone

    I installed Bluetooth stack and a connection via Bluetooth Manager

    But Tecra will connect only as "Network Access Point.

    How can I create a link as modem - I'm probably not using the Tecra via mobile, on the internet but I have certainly you want to use the functionality of modem from mobile phones to send faxes and SMS (text) messages when out and about

    Any help much appreciated

    You must use the custom of "Bluetooth settings" Mode.
    Take a look at the following document called
    "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
    on this site:
    http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO
    and you should make it work.

  • Tecra 9100 comes on intermittently and turns off after 10-15 seconds

    Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

    The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

    It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

    Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

    Thank you

    Hey,.

    Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

    But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

  • Problem to download Bluetooth stack file - file is corrupt

    Hello

    I am trying to download the driver for Win7 bluetooth stack (installed on A300-1 MB)
    The file available for download is corrupt.

    Is this only a problem for me?

    Thanks a bunch for the help ():
    return on investment.

    Hello

    Please, check

    http://Support1.toshiba-tro.de/tools/Bluetooth/BT-stack.zip?submit=download for Windows 7 32 bit

    http://Support1.toshiba-tro.de/tools/Bluetooth/64-bit/BT-stack-64bit.zip?submit=download for Windows 7 64-bit

  • Tecra 9100 - no audio device after XP Pro install

    The audio device does not appear after installation of xp pro sp2 on Tecra 9100.
    I tried allsorts to research on forums and websites.

    I found install them drivers on this site but used to my laptop.
    I need to locate the audio device before get drivers?
    I know this is a very old problem but I tried for 12 months with no result.

    Any help appreciated.

    WOW!
    You are still using the good old classic? Surely she s or it was a nice laptop but maybe it's time for something faster? ;)

    Back to your question;
    On the European driver Toshiba page, you can find drivers Tecra 9100.
    You should look in the Archive (in product type click Archive instead of the laptop)

    There are two audio drivers for Win XP.
    She s Yamaha audio driver version
    -5.12.01.3141
    -6.13.10.2152

    I guess the 6.13.10.2152 is a more recent who is available and I think that you should use it!

  • Tecra 9100 - BIOS block 1 damaged and the update of the BIOS?

    Hello

    I have an old Tecra 9100 with years of quality service, and it is my first problem, but is a great, after a forced restart the display shows the message BIOS 1 damaged block. I tried to fix the BIOS upgrade to the latest version I found, the 1.6 one, but it is a version of Windows (to upgrade a Toshiba computer I think) and when I try to run it in another computer to generate a floppy and upgrade the BIOS drive, I can't, because a common message from modules of Toshiba.

    Its there any floppy BIOS image - archive I can download to perform the BIOS update the BIOS?

    Thanks in advance.

    Hello

    All you can find is stuff on the Toshiba support page. I don't know where you live, but try to contact nearest Toshiba authorized maintainer.
    They have access to the database of Toshiba and they can get it for you. Call and ask for help. I'm sure they will help you fix this BIOS.

Maybe you are looking for

  • Exclamation point to the Wifi symbol to good internet c

    After update to the lollipop and the next update of the google services, it is an exclamation on the WiFi symbol, even when I have a good internet connection. I tried to forget the connection and set up again but it does not help. At home, I rebooted

  • Cannot connect ACER LIQUID Z630S for windows PC. Pls help

    I'm Dr.Aravindh of the India. Recently bought an ACER LIQUID Z630S smartphone. It was just works very well and connect to my ACER laptop with ease but one day, that I was not able to transfer files to my laptop via a USB cable. My mobile is not detec

  • Get notification that computer is infected with spyware

    I have this red on my computer saying that my computer is infected with spyware and asking me to subscribe how can I get rid of the message of the screen * original title - I have this red on my computer saying that my computer is infected with spywa

  • string variable

    Hi, I want to run this procedure for multiple table names in passing the value to him. How to spend it inside the quoted string.When I run the present with values, the string does not evolve with the input value.create or replace procedure get_data (

  • I listened to a station rado on wmp I can no longer connect to.

    Error message is... Windows Media Player cannot read all items in the playlist. To get information about the problem, click on the icon next to each file in the list pane.