NMH 300 won't start
I got my 300 NMH since May and loved it. But recently, I was downloading a file to the NAS and when I came back to check, on the front, the power LED flashes and the device is no longer connected to the network. I tried to restart it but all that happens is the power light flashes, the hard drive turns on, and then the hard disk turns off. This process is repeated constantly.
I tried another hard drive think that the hard drive could have failed but not luck. I also hit the reset button on the back without success. I think the material on the 300 of NMH just went bad and must be replaced. Can someone offer me something to try before calling for an RMA number?
Thank you. I ended up calling the help desk yesterday evening and do this thing. Unfortunately, it has not changed the result. Looks like I'll send mine for a replacement through RMA.
Tags: Linksys Media
Similar Questions
-
ADED 2nd HD in 810 Elite HPE but now won't start
Just bought a 135qe-810 w/Win7.
I'm moving my HD 300 GB Maxtor SATA existing my HP hpe-150ff to my new 810-135qe. This isn't a bootable hard drive. Data only. Hung but now computer won't start; system goes into recovery mode. Ouch. I can see the drive in the BIOS and everything seems good. Shut down and unplugged the HD Maxtor, reboot and the computer starts very well. Brought back the HD in the older hpe 150ff and 150 boots and HD works very well. Why can I not use this HD with the new computer. If I buy a new HD, will it work? Can I use more than one HD on this computer?
Hey DocCoder...
I agree, adding a second disc, especially in this PC with 2 open housing should be child's play.
No matter how lucky you have another HARD disk, you can try? I have a similar PC (configure to order) same motherboard and one bunch of others in my lab here and they all work without a hitch.
As a test, I tried the disks SATA version 2.0 and 3.0, with a number of different manufacturers go all the way in 2007. Each of them appeared very well (some even had an OS bootable on them and has not caused any problems since SATA looks like for the first bootable hard disk from SATA 0).
There is no settings on your PC to change, it should just plug and play so to speak... So before you return the PC, find out if it could be the drive you want to put in it.
Good luck.
Bill
-
my iphone 6s erased and won't start
My Iphone 6s erased and won't start
Hello
Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:
If your iPhone, iPad or iPod touch won't turn on - Apple Support
-
Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?
-
Equium A100-147 tried to update BIOS, now won't start
I was updating the BIOS on my laptop and now it won't start, the screen stay black and I just hear three beep. A long-term follow-up of two short.
Any help would be appreciated,
Thank you.> I was updating the BIOS on my laptop and now it does not start
It seems that the update of the bios that went bad and had to be reflashed. Bios recovery is a delicate procedure and you should contact the service center:
http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/
-
Satellite Pro 6000 won't start or do something
Hello
My satellite pro 6000 stopped working all of a sudden.
Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
Also tried the back button back in case but no tip was not all good.
It just won't start at all.Any ideas out there?
Thank you
[Edited by: moderation of the Forum]
Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?
-
Qosmio G20 - won't start, error ATA #1
I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart
Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing
To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not
Help, please
Hey,.
To me, it looks like a serious hardware malfunction
You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.
The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.
-
In early 2011, MacBook Pro won't start
In early 2011, MacBook Pro won't start
Is-ti connected? Fully charged?
Give us some facts!
-
MacBook won't start - completely back screen
2015 12 '' MacBook
My MacBook won't start. I put on various points of sale and even changed on the brick of cable and power (I have an extra).
Nothing happens when I press and hold the power button.
Any suggestions before I take it to the Genius Bar?
Here is some information that might be useful.
After I press the button for a few seconds, the trackpad does not haptic feedback, confirming that this is the start.
However, if I press the power button once again, I get haptic trackpad. It tells me that it is on, but I always get a black screen. And if I press the caps lock key, no green light appears.
-
Satellite Pro 2100 won't start at all - LED flash
My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.
On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.
Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).
Any ideas?
Hello
I think you're right. Flashing LEDS are a sign that hardware is defective.
I can't say what exactly is the problem, this should be verified by a technicain.
On the other side I don't know if it's worth to repair such an old machine.Good bye
-
Hi, community,
my pro sat suddenly won't start. only power led flashes. Got out of the car, a piece of metal appears to be noise. But - if the drive is broken - shoulnd't the laptop will start anyway? Thank you for your help in advance. Wolfgang
Hi, Wolfgang
Yes, the machine must be able to start up indicating at least the TOSHIBA logo without the optical drive and fixed.
Some background info: flashing DC-IN means that you have a problem of power supply to your machine.
Please delete what you can without using a screwdriver. PC card, battery and so on. If you have 2 mem cards remove one.
When everything is there, try to restart the device. Keeps blinking? If you had 2 plates of mem, remove the still inside and install another one in another location. Try again. Always the same?
So I guess that there is a physical problem with the machine.If the machine starts normally, try turning off and to reconnect one removed items at once turn on the machine after each reconnection.
Test them one by one and see if you can find out if there is a specific that causes this problem.Good luck!
Tom
-
Hello. I'm new on this forum, but I need help. When I turn on my Satellite A30 it won't start. I get the: in touch with toshiba on the screen, then the fan starts but it won't start. I get this message on the screen: PXE - E61: media test failure, check cable of
PXE - MOF: exit ROM PXE.
John was soonHi Mustafa,
In the BIOS settings, you should have an option called "Memory of UMA", which should show that 64 MB. This is the memory allocated to your graphics card and is main part of RAM of the laptop.
If you choose this item it should display the options available in 16 MB, 32 MB, 64 MB and 128 MB. use the arrow keys to change from 64 MB to 128 MB., then save settings and exit. On re - start your available RAM will be reduced by the additional 64 MB, which will be reserved for your graphics card.
HTH
-
Satellite P300-156 won't start or by MAIL
Hello
I have a Satellite P300-156 I bought a few months as damaged. The screen has been damaged and the case slightly cracked. I replaced the screen and hard drive and main card seems to have no physical damage. I've been running this system for 3 months now without any problem but, today, for some reason, it won't start or even POST. It powers on and the CPU fan starts to turn then stops and does nothing. No display (I tried external). CD player works. No beeps.
I tried reinstalling RAM even open completely and reinstalling all connections, nothing done. Does anyone have an idea what component is gone? (CPU/GPU/RAM)
Any help would be greatly appreciated
Thank you
Did you update the BIOS or something?
For me, this is a normal behavior when the BIOS chip is faulty. -
Satellite U400-14 b turns off and now it won't start
Hello
just got a new Satellite U400 this week.
Worked perfectly the first days, and then last night, it just turns off and now it won't start.I press the button and the row of lights beside him light up, but nothing happens that I n t even get as much as the Toshiba screen.
I tried a lot of things. I left it plugged in all night, tried to take the battery and any results now.Little led lights on the bottom indicates that it is his stuffy, battery is white not orange when you press they light up only for a fraction of a second.
The only thing I can compare it is too when a car won t start and you keep turning and turning the key, well in that case, pushing a button, and nothing happens, fans don t whir or anything...
help please...
Additional memory (RAM) has been installed? Try to remove a memory Module and try another memory location.
If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.
-
Satellite 1800-100 won't start with new memory
My satellite s1800-100 won't start although my new memory (2nd) module is 128 MB PC100.
I have Samsung samsung K4S281632C-TC1H module as PC100 (128 MB) memory on SLOT 1 by default.
Although all of the features and form factors are clean, why not my Satellite S1800-100 starts? I checked the new (slot 2) memory works fine and tested OK.
So, is there as a possibility to have a problem in the 2 Slot? Or is associated with failure of the BIOS? (there is no more recent BIOS, current is 2.20 for Satellite S1800-100).
I am disappointed. I bought a new 128 MB PC100, to insert it in the slot 2, my Toshiba didn't boou up!.
Important note: if I connect the new memory I bought yesterday, works very well in Slot 1.
Please help and understanding.
Kind regards...
Hello
Well, it very difficult to say why it won't start.
I think that there are several possibilities:(1.) you used a bad module
(2.) the second Bank of the Board of Directors has a malfunction
(3.) the laptop does not support max 256 MB of RAMI think that point 1 and 3 is not relevant because you have tested the module and it worked on the first location. Additional the laptop should be able to handle 2 x 256 MB memory, so you should be able to use 2 x 128 MB
I think that the second ram location may have a malfunction.
Please check the second slot with a module of memory.The second possibility is to use exactly the module which is recommended by Toshiba.
As I remember it s PC100 128 MB (PA3005U) SDRAM
Maybe you are looking for
-
SATELLITE A30 ERROR! AFTER THE INSTALLATION OF RECOVERY DISKS
INSTALLED BOTH DISKS AS MANUAL... GET THE ERROR MESSAGE... AT THE END OF DISC 2. CAN FIND NO WAY OUT OR FOLLOWING THE INSTALLATION... REMOVED DISC SEVERAL TIMES AND BEGAN THE PROCEEDINGS WITH THE SAME RESULT. NO ERROR; MESSAGE 437... ; CANNOT READ TH
-
Compaq Presario CQ60-514NR: Compaq Presario CQ60-514NR
The HDMI port blocked on the Compaq Presario CQ60-514NR can be opened or it is unusable? There's an hdmi port on this subject I would like to use to connect the computer to my new tv, but he has a piece of plastic molded on it. Peut This be removed
-
my photos are saved in my photo file, but they have been digitized and now say adobe PDF and post to Facebook, someone knows why or what I can do?
-
The screen upside down - why? How can I return it the right way up?
My screen is upside down, no idea how it back to the right way to the top?
-
Looking for reviews - Server Configuration requirements
I'll start with the note that I am a newbie on this chapter. However, I was instructed to reach a server for our office configuration. Three different places, more than 30 users. Database SQL, perhaps viewing in the future. I did some research and I