NMI: Channel check/IOCHK

Similar Questions

• .... MALFUNCTION OF THE EQUIPMENT... CALL YOUR PROVIDER OF SUPPORT MATERIAL... THE SYSTEM STOPPED... NMI: CHANNEL CHECK / IOCHK...

  After the execution of 4/5 in my system hang and sometimes, it's the blue screen and message showed...

  HARDWARE MALFUNCTION
  CALL YOUR PROVIDER OF SUPPORT MATERIAL
  THE SYSTEM STOPPED *.
  NMI: CHANNEL CHECK / IOCHK
  Please, I beg you. someone tell me how to solve this problem...

  I would recommend that you contact the manufacturer of your computer and give them the error code, as shown.  The error means there is a serious hardware problem with your computer, it is not what Microsoft or Windows caused or can solve.

• Tecra 9100 ' NMI: channel check "BSOD".

  My laptop two years Tecra 9100 1.7 Mhz computer faithful began to get a very regular blue screen of death. This occurs only when it is running on battery power and the error message is:

  Hardware malfunction

  NMI: Channel check / IOCHECK.

  Does so within approximately 30 seconds 2 minutes of running on battery power.

  I was hoping that it was a problem with corruption of driver so I ve completely flattened the thing on day 1 with a full drive reinstall with 'the CD ROM product development' and the problem persists.

  The battery should t be worn, as I have little use, I even kept it out of the machine to avoid wear out that I almost never need to use the machine in a mobile context, i.e. There is a practically new battery! It's only in the past month (since I got wireless broadband) I used the battery at all.

  Just to remind the laptop is totally stable on the sector and never blue no screening while tension in this way. The problem occurs only when powered by a battery. I flashed the Bios up to v1.6 v1.5 with no effect. The problem occurs with a completely new install from the CD ROM recovery and also when it is fully configured with XP SP2 and all the XP2 post updates.

  Anyone any idea what's causing this error? Any diagnosis I could do?

  Thank you very much.

  Tony.

  Hi Tony

  Sorry, but I have bad news for you. This message occurs if there is a problem with the main Board. I can't say exactly what it can be, but I think that some piece of hardware is not recognized correctly.

  Contact the Service partner in your country and Tony let check the laptop.

• Message "check/IOchk NMI: channel" occurs on my laptop

  Hi, when I use the laptop on battery after a few minutes I got the following blue screen, battery meter shows 3-hour charge

  malfunction of the equipment *.
  Call your provider of support material
  NMI: Channel check/IOchk
  system stopped

  Anyone know what the problem is / caused by
  I run xp pro sp2 fully updated updated etc.

  Hello

  I found very interesting article from Microsoft about it. You can check on this page http://support.microsoft.com/kb/222973/en-us

  Otherwise that you can contact the Service partner in your country. They can tell you what may be the problem.

• Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  I installed ENLWI-G2 802.11 g Wireless PCI Adapter in my Dell Optiplex 760 with XP SP3 32-bit Windows. But it gives me a blue screen with the error:

  Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  How to solve this error?

  Try to switch on the memory modules. Ask the MS site for more information on the specific error.

• Pavilion DV2000 - NMI: parity check / memory parity error

  My laptop was working fine and all of a sudden I got this blue screen with this message:

  Hardware malfunction
  Call your provider of support material
  NMI Parity Check / Memory Parity Error
  The system is shut down

  I have try the recovery disk and the computer back to its factory setting. It will be fine for about a day and then the blue screen light up again. I have try that 3 times now with no luck.

  Can someone please? I'm getting really annoyed that I run my business using my computer every day and I can't continue to recover and reinstall everything every two days.

  The laptop has 150 GB of memory with two 1 GB of Ram.

  What do you mean by delete a module?

  The computer cannot even load into the window before it crashes with blue screen.

  * Just realized there is the notebook section. I have post the same problem on this article and close this one here *.

• IDE channel - check the State DMA/PIO

  Hello

  I tried to check the DMA/PIO State of my system, but I couldn't find something that mentions primary/secondary channel under "controllers IDE ATA/ATAPI" in Device Manager. From what I've read in various forums, it is the way to do it, and I also noticed that a few people could not find the ' primary/secondary way' thing as well. (but I could not find a solution to the issue)

  My problem is that some USB ports (2 of 4) I used normally would slow when I transfer data to and from the external HARD drive. Now, I've been move to the other 2 USB ports, and I could see the difference in the rate of transfer. This has happened before with my XP system, but I was able to access the channel primary/secondary and turned them all to DMA, which is something that I can't do now with my other Vista system. So now I would really check on that, and I need help to make...

  My system:
  Windows Vista (updated with all the Windows update)
  Intel Core 2 Duo P9600 2.67 GHz
  4 GB OF RAM
  nVidia GeForce GTX 260-1 GB memory
  Realtek/Creative SoundBlaster
  HARD drive 320 (which is good, it's almost full, leaving about 20 GB of free space, but the problem that I mentioned above happened when I had still 60 GB of free space, as a few months ago)

  It would be great if someone can help me to brighten my days here. I'm not a geek, but certainly not an illiterate as well.

  Thank you in advance!

  Hi PC45,.

  In case you can't find primary/secondary channel under "controllers IDE ATA/ATAPI" in Device Manager, you can try to expand IDE ATA/ATAPI controllers and check for ATA channel 0 or right-click on it and click Properties. Later, click on the tab for setting advance, check if you can see the status of the DMA mode.

  Because you are connected to the USB and the data transfer rate is slow, and it works fine when connected to a different USB port, I suggest you to update the USB drivers on the motherboard manufacturer's website.

  You can also navigate to the link below and follow the steps to update the drivers on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, if you have any security software installed on your computer, you can try to temporarily disable and check if the date transfer rate is better. If you find the security software, the origin of the problem, you can contact the manufacturer of security software and check if there is no parameter to be changed. Later, re-enable the security software.

  I hope this helps. Let us know the status.

  Thank you and best regards,

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• NMI: parity check/memory parity error - how to fix? Laptop VYE

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Good afternoon Syed V.

  Finally was able to check the RAM, and it showed everything is 100% ok. Is a systems audit and which seemed to clear some things up, last night.  In reading your response, closed and restarted system yet so not out of the Woods. Also came to ask 'something' Ethanel and a new driver... don't know what who it was but impossible to find or make.

  I went in Bluetooth.  Automatic change has already been fixed, but I had two other listed users I deleted.  Also, I have been using a free software from Malwarebyetes and I don't want to delete that too.

  Thanks again for the help and here goes... see you soon. Bluepoppy

  _____________________________________________________

  Late afternoon, Hello.

  So far so good.  Boots up great.  Screen does not blink and the color is correct.  The mouse moves freely and without crashing and restarting. So far so good. Thanks for your help.  If necessary, I will contact again.  THANKS-Cheers. Bluepoppy

• SP4600 - hardware failure message

  Hi, (sorry, but my English is not good:-D))

  I bought an old SP4600 (type SP460E-038LR-FR) with formatted HARD drive (so less potential drivers and software utilities). For the first 1/2 in. I m of HDD installed WinXP Home, on the second space 1/2 I m of HDD installed Linux Mandrake 10.1. I installed m maximum drivers and utilities available for this model and the Win XP operating system from internet downloads.

  I have a problem: laptop computer performance of AC power, the battery is normally charged (up to 2 1/2 hour to 100%), computer laptop, works normally, all ok, great job. If but laptop running on battery power (cord is unplugged) and I have choices on 'Start-offer' (LILO) entry "Windows XP", after the full boot WinXP system for a few seconds (sometimes 1-2 minutes) or the first move with the mouse, I get a black LCD screen with blue rectangle and white text:

  Hardware malfunction
  Call your provider of support material
  NMI: Channel check / IOCHK
  The system stopped *.

  Except a 'switch' computer laptop Don t answer other buttons.

  If but laptop running on battery power (cord is unplugged) and I have choice on 'Start-offer' entry (LILO) "Linux", the system boots normally and aditional run is all ok, next work is possible well until by battery (ca 1 hour 16 minutes). End of battery discharge of progress, system that Linux is normally completed and the laptop turning off circuivent.

  By running the laptop from AC power, System WinXP (Linux too) running without any absolute of problems - all ok, "nice."

  Unfortunately, sometimes I need work with laptop and Win XP in terms of battery, that momentally is not possible.

  Please, all know someone like my problem, answer me or send me an e-mail.

  Thak you very much, best regards, Radek Zacek, CZ

  Hi Radek

  First of all I must tell you that SP 4600 is super portable. It's the old but very good. And now, something about your problem. In my opinion some hardware component doesn't work properly and you must contact the Service partner. It is possible that you can it be long with power, but it may be worse use it long.

  It is also possible that power electronic load do some problems. Like I said before, Service partner. They check your machine.

  Good luck!

• Tecra 9100 blue screen when you disconnect the power supply

  Hi people,

  Im having a major problem, Ive had a major problem with my tecra 9100, when I unplug the power cable and try to use the laptop on battery, the blue screen comes up saying NMI: channel check / IOCHK

  then the computer shuts down, it restarts only properley if I plugged power of ext,
  also something to note, when I unplug everything first, he's not str8, its only when I try to use the laptop, which is pressing a key

  If someone knows something about this could you please let me know

  Thanks carl

  Hello

  This has been already discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13784

  Check the sanremo poster, which refers to the knowledge base article Microsoft!

• TECRA 9100 battery problem

  Similar experiences to mine, please?

  After using no not my Tecra for some time (about 3 months). He was once again the charger for more than 24 hours and I'm now done with the original problem, I had the last time I used the Tecra, several months ago! The problem is, I think, only related to the tent to use it on battery, as follows:

  At the start of the machine of 'cold', after passing the request of 'password' screen, it goes straight to a "small blue screen", which includes the message:

  Hardware malfunction

  Call your provider of support material

  NMI: channel check / IOCHK

  The system stopped *.

  A little more information, I found that I can actually 'blue screen' situation - turn off not having don't no need to remove it battery that I first thought - and if I get the power cable then everything starts up well and seems to work normally. If I then remove the power cable (leaving the laundry to run on battery only) the small blue screen and same message reappears.

  Yet once which seems to indicate a battery problem, I guess?

  Has anyone else had a similar experience?

  Post edited by: Gary S Cooper

  Hello

  Windows may indicate a fundamental error messages only when material occurrence malfunction, so that the elimination of the errors can be difficult for equipment problems. Most of the problems of material step in connection with the motherboard, the main memory on a motherboard or adapter or the stamp on a motherboard or adapter.

  On this path, it is not easy to say what may be the problem. I don't know how old is the unit, but if the unit is still under warranty I advice you contact service partner chartered. I'm sure they can find what may be the cause of this problem.

  Good bye

• Tecra 9000 - hardware malfunction with battery

  Hello

  If I only work with my battery I get the message:
  Hardware malfunction
  Call your provider of support material
  NMI: Channel Check/IOCHK
  Support has ceased

  Last week, I change the battery but the problem is still on.

  Hello

  According to this Microsoft article http://support.microsoft.com/kb/222973/en-us, there is a hardware problem. In my opinion, you will not be able to record only. Contact the service partner in your country and let check the device. If this continues with the new battery too, I presume that there is some problem with electronic power to the motherboard.

  This message occurs only if the mobile PC is running on battery power, or in other cases too?

• Tecra T9000: Hardware malfunction start-up

  NMI: CHANNEL CHECK / IOCHK message

  When starting my laptop, a TECRA T9000 I had problems with the message... * Hardware malfunction * NMI: CHANNEL CHECK/IOCHK this system stopped *.

  I had the hard drive changed and again I got this message once more, it starts later because there for me to write this, but if you can help me identify the problem please!

  Hello

  Windows can display only basic error messages in case of malfunctioning of the equipment, troubleshooting can be difficult. Most Centre of problems of equipment around the motherboard, the RAM on a motherboard or on an adapter, or memory cache on a motherboard or adapter.
  Well, it would be very interesting to know that you have changed material. In addition it is possible that you have improved the unit with the device is not compatible.

  Good bye

• Hardware malfunction * the system stopped *.

  Had Windows reinstalled on Dell Inspiron 1318, computer Vista laptop was working fine, then during use, the blue screen appeared with this message...

  • Hardware malfunction
  • Call your provider of support material
  • NMI: channel check / IOCHK
  • The system stopped *.

  The computer does not stop! What should I do?

  http://support.Microsoft.com/kb/315223

  The article above says that it applies to XP; but the error seems to be related to the material.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: Equiqm A100 - 01 M shows blue screen

  Blue screen Equiqm A100 - 01 M poster

  HARDWARE MALFUNCTION
  CALL YOUR PROVIDER OF SUPPORT MATERIAL
  NMI: CHANAL CHECK / IOCHK

  THE SYSTEM IS SHUT DOWN

  Hello

  Thanks for the report. You have any questions on this subject?

  Anyway check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13784
  Maybe this will help.

  Good luck!