no access to internet after waking up from hibernation?

Similar Questions

• RALink RT3290 stops responding after waking up from hibernation, loss of connection

  RALink RT3290 802.11bgn Wi - Fi adapter (driver 5.0.37.0 25.11.2013) stops responding after waking up from hibernation, loss of connection. To recover, it must be restarted (toggle), what happens no wired connection, for example, obviously, drivers Ralink need good alarm clock a reset. Thank you in advance.

  Looks like that driver update solves the http://www.mediatek.com/en/downloads/ problem

• Satellite Pro M70-275: screen doesn't work after waking up from hibernation.

  Hello

  I sometimes encounter this problem: when starting the hibernation (not sure of the English term, although that. "light sleep" mode in WinXP...) the screen turns on again. The operating system seems to be up and running again, but I really don't know because I do not...
  Sometimes it works fine, but I would like that it works all the time.

  Any ideas?

  / Johannes Ogren
  Gothenburg, Sweden

  Hello

  Will there be the same situation after waking from sleep mode?

  James is right. Usually, this kind of questions is fixed with the new version of the BIOS, but you can also try installing the latest version of Power saver utility.

  If anything maybe you must reinstall the OS using supplied recovery DVDs.

• G560 - network disconnected after waking up from hibernation

  During the last two days, my laptop Lenovo G560 (running Windows 7, 64-bit, BIOS 2.10) has had problems with its (wired) network card after waking from hibernation. It is shown as disconnected (even as if the cable was physically detached). The only big change I played in the last few days has been installed Service Pack 1. However, the problem only appeared about two days after, so I don't know if this is related at all.

  In this case, IPCONFIG shows the following for the NETWORK card:

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  If I try IPCONFIG/renew, I get

  Windows IP configuration

  No operations can be performed on the connection to the Local network, although it has its media disconnected.

  Hovering over the said tray icon "not connected". Troubleshooting of course can't find anything. Also, there is no weird in event viewer entries (unless they are hidden somewhere in other modes). Basically, the behavior is identical to when the network cable is physically disconnected (disconnected).

  In addition, disconnect the network cable, wait a few minutes and in him plugging back again once does nothing.

  For now, I have two workaround solutions:

  -system reboot

  -right click on the connection to the Local network (in network connections), select DISABLE from the menu, wait a few moments and then choosing the option ENABLE on the shortcut menu.

  Is there a better solution to this? Speculation on what might be the reason for this problem all of a sudden?

  Right click on my computer > manage > device management > network cards > select wireless adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

  Please post back with the results.

• Satellite P200-144: Resolution changes after waking up from hibernation

  On my P200 Satelltie I put the graphic resolution of 1440 x 900,
  but on wakinging it from hibernation, it reduces the resolution.

  Also about removing an external display, it does the same thing.
  Annoying because I have to reset the resolution and rearrange icons desk top of the page every time.

  Any body know how to pass this auto reset cut, so that it remains with the setting of the resolution?

  I have too many P200, but everything works fine. You have operating system using recovery DVDs.
  By the way: what operating system do you use?

• Satellite Pro L20: Showing empty after waking up from hibernation

  I've had my laptop Satellite Pro L20 a year now and it has been slowing recently, especially when starting after being in hibernation mode.

  It is even now not return back. I had placed it in hibernation, and then when I tried to turn it on again, it hummed as if it was put into service, but the screen remains blank.

  I don't think that he is in communication with the rest of the laptop. I tried to restart it several times but I still can't out of his inactive hibernation mode and the monitor simply unresponsive.

  Any help would be appreciated kindly!

  Hello

  > I've had my laptop Satellite Pro L20 a year now and it has been slowing recently,.
  Maybe you should clean the HARD drive and also use defragmentation application to optimize the data saved on the HARD drive.

  Back to your problem: I don't know if this will help, but you can try to do the BIOS update or install the latest driver from Toshiba support page display.

• Satellite P750 - resonding stops after waking up from hibernation

  If anyone can help, I recenty purchased a P750 Satellite equipped with an i7 processor it has 4 GB of RAM. I was experencing problems since buying it. It seems to just stop responding the round icon turns showing his thought but I can wait 10-15 minutes and there is no change. This problem occurs sporaticly and sometimes occurs when loading new programs. The problem happens almost all the time if he entered hybernation and when I wake with the mouse, it starts but when I have to connect to the net, for example, he will bring to the top of the page of internet explore and the round icon will be spinning and it will stay like that for centuries until what I am forced to close it with the start and stop button. When I have this problem I have tried using CTRL ALT DELETE to open the Task Manager but the Manager tasks will not respond.

  If anyone has had the same problem and is there a solution. Note When I turn the disk protection mode HARD the probem seems to happen less frequently but persists.

  Hi captain101,

  Wait a minute, please. Icon of what you mean exactly? I don't know what you're talking about, so a more detailed description of this icon would be useful.

  The more you use the version preinstalled Windows from Toshiba or your own installation?

• Computer is unlocked after waking up from hibernation

  My computer is unlocked when he wakes up after hibernation, it's that everything works well, but these last days, it is weird. I tried to restart my computer in Eve extended and checked again and same thing.

  Well, I only came here for a workaround, really.

  Found the fix here:
  The option is grayed out, had to reset it.
  Fixed now.

• My PC loses connection local and Internet after waking from sleep/hybernation.

  My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

  Vista 64 SP2

  Hello

  Check the updated drivers for the NETWORK card and WiFi.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Also, check the power supply for the device management settings in device - double click Manager
  the device and the power management tab.

  ==============================================

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After waking up from my mac, the wheel sync runs continuously, but not synchronize files.

  After waking up from my mac, the wheel sync runs continuously, but not synchronize files. ???

  Hello

  Please make sure that your internet connection is good.

  Try to connect on app CC and connect again https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  You can also view following a discussion of this question Re: Creative Cloud app sync. problem with the web application

• T410 - washed out colors or lines after waking up from suspend

  I have a strange problem with the display on my new Thinkpad T410. I don't know yet how to describe. Red, green and blue still exist, like black and white, but the brightness between the two levels are washed out or banded. I tried to take pictures of some color models to demonstrate.

  Most of the time, the screen works as I expect. Sometimes however (especially after waking up from his sleep?) the gray borders around things seem too bright and washed out colors. When this happens, he persists and worsens slowly over time.

  If I change the brightness of the screen from top to bottom with Fn + start/end, the effect will change randomly to each pressure, sometimes changing to something even worse, showing a lot of color, strips or almost monochrome, but then to the lesser model, but will always go wrong.

  Not affected by:

  • Change brightness
  • closing cover
  • move to the rear and projection screen
  • locking computer
  • Changing resolution
  • change refresh rate
  • change to 16-bit color
  • tapping or screen rotation

  Didn't happen since I installed the new BIOS.

• cannot access the internet after upgrading to firefox 30.0 on windows 7

  After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

  Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

• is it safe to access the internet after April 8 if I bought independent security of AVG?

  I have a full day of security system, so probably protect my computer even if is no longer, I'll get Windows updates?

  It is never 100% secure access to internet at any time, no matter what security software is installed and what operating system is running. After April 8, the XP operating system will be more and more insecure as and when new ways to exploit the vulnerabilities of Microsoft surface will not provide fixed by Windows Update. As its use XP dies offshore, I think that there will come a time where criminals lose XP and move their efforts towards OSs more popular but I can't say when it will be, no one can.

  Related links...

  http://Windows.Microsoft.com/en-us/Windows/end-support-help

  http://www.Microsoft.com/en-us/Windows/enterprise/endofsupport.aspx

  Tricky

• Equium A110: Cannot use LAN after wake up from hibernation or standby

  Hi guys

  I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

  Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

  Please help me.

  Thank you

  Hello

  Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

  Also found this possibility. I put t know if it will help but try it.
  1. go to [start]-> [Control Panel]-> select [System]
  2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
  3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
  4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
  5. Press [OK] to close the dialog box.

• Satellite P750 waking up from hibernation

  I have Satelitte P750 and Windows 7 home 64 bit.

  The problem occurs after I put in hibernation for laptop. He wakes up without reason (exactly - I don't know why).
  It can be dangerous posibly for my hard drive and data when he wakes up for example in the backpacking trip - I thought that when the laptop is in hibernation may not wake up without user action.

  I looked through the logs of windows, and I think TOSHIBA service station looks suspicious...

  How to activate offf?

  Hello

  Usually the laptop should not reactivate hibernation without pressing a power button, but there are a few options that could affect it.

  Please check the BIOS.
  You can find called Wake LAN up or Wake up keyboard options
  All of these options that might be responsible for this, you need to disable