No answer / crashes when you move an element of textPath svg

Similar Questions

• First pro crashes when you move existing ties around chronology

  I get constant crashes when I move clips on my calendar. I can move them and I can rub through. I can double click on it and do all the rest. But if I click and make it crashes without fail.

  I use PPro CC2014 last updated on a MacPro 6.1

  6-core Intel Xeon E5

  Memory: 16 GB

  AMD over-pants D500

  Hi Derek,.

  You have the app installed "Pushbullet" Google Chrome? If so, remove it.

  Thank you

  Kevin

  NOTE: If your question is crashing or freezing when you drag the clips to the timeline, then see this KB doc: first Pro CC 2015 freezes when you drag a clip to the timeline

• Is it possible to stop an animation when you move the element

  I am trying to create an entire city with Adobe Edge.

  I have buses and people who move around, which was really easy to make.

  But now I want to add some additional information for the bus. I thought to stop the animation overview and open an overlay on click.

  But my score event does not get triggered, nor click or any other events.

  I can add the same events on a static element, such as a House, and it works perfectly fine.

  Edge does not support this, or how to set it?

  Thanks for the help

  I suspect that you have a problem with z-index. Your bus may be under something transparent. Your code is not correct. What do you have?

  .

• ID (CS6) reliable crashes when you move the point to the mount table

  To prepare a new version of a large document (220 pages letter, 350 patterns), I started to spend all the diagrams at the editing table. It worked well until at some point (say 40 pages or almost) ID crashed during this operation. After recovery I could go on for a few pages, but now I am in the situation that I can't go on more. Whenever I move a frame at the editing table, ID crashes.

  I tested with OS X 10.8 and OS X 10.10.

  What I try to go beyond this problem?

  Try to move pages to a new document.

• Acrobat crashes when you move buttons

  Hello world

  I'm adding buttons to several documents Acrobat by cutting and pasting of an original document.  This works very well for a couple of files but then crashes just Acrobat, especially if I try with the right button on the buttons to copy on each page in the new document.  Why is this?

  We run Acrobat 9.0 Pro on both PC and the problem occurs on both computers.

  Anyone have any ideas on why this is happening and what we can do to solve it.

  Thanks in advance.

  Dave

  You don't mention your OS, but Acrobat 9.0 has been updated to fix various problems. You should try to update to the latest which is 9.1.x.

• Nexus 5 on Marshmallow 6.0 crashes when you watch movies in Firefox.

  After the upgrade to 6.0, Firefox Marshmallow Let's my nexus 5 crash when you watch a movie. Seen on different sites.
  He begins to stutter, then freezes after the phone reboots.
  Front on Lollipop, it was fine.
  There is no problem on the same site in chrome.

  We have a new version of Firefox for Android with a fix for the restart of Marshmallow (Android 6.0) on the media playback. https://www.Mozilla.org/en-us/Firefox/Android/42.0.1/releasenotes/

• Help - Photoshop Elements 8 crashes when you try to start multimedia

  Photoshop Elements 8 crashes when you try to start the Organizer. It is funny, from the editor of Photoshop is not a problem and works fine.

  I uninstalled the software and then installed again, but had no effect.

  What can I do?

  Nick

  Hold down the shift Organizer launch wjilst, and then click to create a new catalog, for example My Catalog2

  If the empty catalog open try to import multiple JPEG files and this will help to determine whether the original catalogue is defective.

• Adobe Premiere elements 12 will be not open. Crashes when you try to load 'importer quick time. "

  I have windows. I tried to uninstall and reinstall. As I said in the title, it tries to open but crashes when you try to load 'importer quick time. " Help, please!

  the link you show the locations of preference files so you can delete/rename them without having to open the program.

• My BDP-S3100 crashes when you try to load Netflix.

  Player BDP-S3100 crashes when you try to load Netflix.  It gets stuck on the red logo screen.  While the loading bar continues to move as it loads, it never advances to the Netflix menu.  By pressing the back, home, or any other button does nothing.  Physically pressing the power button on the player does nothing.  The only way to resolve the issue is to unplug the drive completely.  All other app works very well and no internet connection is down.  Any help would be appreciated.

  Hi lcornell!

  Please make sure that the Blu - ray software is up-to-date. Click on this link to check the latest firmware of the device.  

  Don't initialize any personal information.

  1. on the remote, press the HOME button.
  2. go to settings.
  3. under settings, select Reset.
  4 reset, select initialize personal information.
  5. check if the Internet videos are back.

  If the problem persists after performing the above steps, try resetting the player to factory default settings.

  A Factory Reset.
  1. to support the remote control, press the Home button.
  2. go to settings.
  3. under settings, select Reset.
  4 4 remise back to zero, select Reset to Factory Default Settings.
  5. Select all settings.
  6. If the drive turns off after the reset, just turn it on and the Easy Setup appears on the screen. But if the player does not go out only to return to the Setup Menu then go to Easy Setup. Just follow the guests on the screen to complete the initial installation of the player.
  7. check if the problem is resolved.

  If my post answered your question, please mark it as "accept as a Solution.

• Crashes when you use safari

  MY Mac Pro 2009 crashes when you use Safari. I can tell when it is about to happen. The screen will start to Flash and the mouse still moves, but you cannot select anything. Sometimes I can get it to unlock by pressing the ESC key.

  When the freeze on Safari, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• T60 freezes when you move the trackpoint right after starting

  Hello

  I had this problem for quite a long time. Initially, I thought that it was due to an update to Windows XP, but I couldn't find any message on newspapers when the laptop crashes. I reinstalled XP many times to get rid of any incompatibility related to the software, but even with a new installation, it was happening.

  I realized recently after several tests that the problem occurred more frequently when you move the mouse (trackpoint or touchpad) just after the start of the system (cold start or start of hibernation). What I discovered is that this will happen is no longer if I suspend the laptop after starting the system, do not touch the mouse.

  The symptoms are that Windows freezes. No activity at all HD, the system responds to any keyboard and mouse input. If I close the lid of the portable computer system is not put into hibernation. The only way to regain normal operation is pressing the button for a few seconds, then the system turns off, and then turn on normally.

  All the drivers are up to date.

  Someone at - there experience this problem?

  Thank you

  Try to remove the battery... If the battery is dead, it could give you this problem...

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error messages when you move files PSE13 and PSE14

  I am reorganizing my records of PSE 14.1 (and a few hours before using the PES 13) on Windows 10. This means that I'm moving them from one disk to another using the view of folders on the left panel of the PES.

  Everything goes very well with the first shift after the launch of PSE. No error message and the files in the folder find you in the right place with the folder.

  But for much of the subsequent move there is several error message boxes that must be pressed one by one to move forward. Much more than the number of files involved. However, ultimately files and folders get into their expected places. But with dozens and dozens of needless (?) Click on the OK button.

  Error messages that I see are

  • "A folder with the same name already exist in the requested location" - which is patently false, as I'm only moving called records and verifying that I won't have existing folders with the same name instead of the target. The record was 16 photos inside and the message popped up 55 times.
  • "The operation could not be performed. "The error occurred because of invalid characters, read only location or existing folder with the same name"-this comes very often after the message stated above, but not always. And in multiples as well.

  And every now and then the move operation is going well through.

  I tried to understand if there is a model - but nothing so far... I use no "special characters" in the filenames etc...

  Is there another way to move the folders? Is there a solution to this behavior?

  juhar76990688 wrote:

  Looks like I have at least found a way easier and more predictable and easier to reorganize my files: travel using Windows file / folder management tools-, then to reconnect files from PSE. In this way, I know how many dialog boxes, I need to treat every step - and it is much less than the way PES...

  Yes, it was what I was going to suggest it.

  I did not PSE14 because I'm away from home now. I've already met these messages before, and I think you are right that the first time you move a folder to a new empty destination tree, you do not have problems. I would not be surprised if there was a real bug in the display of folders when you move files repeatedly, but I was not able to reproduce the problem. A possible source of problems would be the way the folder hierarchy is updated in elements; I guess that to keep this folder updated tree, there is a procedure of "cache" to speed up the process (folders display in the tree should work with an image of the Explorer, supplemented by information in the catalog itself). Older versions were very buggy in folders view, but I'm not sure that the current version (since PSE11) is absolutely foolproof.

  Move the folders step by step from the Explorer and reconnect immediately seem to be the best in your case.

• Photoshop CC 2015.5 crashes when you open any file

  Hello

  Just upgraded to Photoshop 2015.5 Photoshop CC 2015 CC

  It crashes when you try to open any file.

  The following comes from Windows 10 64-bit Event Viewer Application Error log

  Description

  Application of vulnerabilities path: C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Photoshop.exe

  Signature of the problem

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 17.0.0.88

  Application timestamp: 57513821

  Fault Module name: intelocl64.dll

  Fault Module Version: 3.0.1.10891

  Timestamp of Module error: 556d7f9f

  Exception code: c0000005

  Exception offset: 00000000000433a 3

  OS version: 10.0.10586.2.0.0.768.101

  Locale ID: 2057

  Additional information 1: 7f0f

  More information 2: 7f0f023ec13afd94b8f4a68b34f13f91

  3 more information: 40b 8

  Additional information 4: 40b8a6a888449932af338cad2242ec3a

  Additional information about the problem

  Bucket ID: ef7a946e119a19e360e855b018cd190d (120502590482)

  10 Windows Event Viewer Application logs

  120502590482

  4

  APPCRASH

  Not available

  0

  Photoshop.exe

  17.0.0.88

  57513821

  intelocl64.dll

  3.0.1.10891

  556d7f9f

  c0000005

  a 00000000000433, 3

  1

  a0f880a4-a37d-46f6-9a41-b3d380217c10

  0

  ef7a946e119a19e360e855b018cd190d

  All the drivers are up to date.

  Updated creative cloud.

  Signed in & cloud Creative

  Installed and uninstalled Photoshop

  Any help appreciated

  Mike Regan

  Hi Mike,.

  The cause of the accident is intelocl64.dll which is the file to Intel graphics card drivers.

  Make sure that your graphics card drivers are updated.

  If this does not help, follow these steps:

  • Quit Photoshop
  • Press windows and keys r to open the run window
  • Type w and press enter
  • Open Roaming\Adobe\Adobe Photoshop CC2015.5\Adobe Photoshop CC2015.5 settings
  • Move the sniffer file on desktop and relaunch Photoshop
  • Check that it works fine now

  Concerning

  Claes

• Nobody knows... including Adobe why Photoshop crashes when you try to print. I had Adobe take on my computer, they put it is good, and then as soon as I download an update off he goes again. ADOBE when are you going to address this problem there I

  Nobody knows... including Adobe why Photoshop crashes when you try to print. I had Adobe take on my computer, they put it is good, and then as soon as I download an update off he goes again. ADOBE when are you going to fix this problem it is we makes everyone crazy.

  I'm willing to take to social media, this problem will just on and so forth. Someone has found a permanent solution, if so can you let me know the answer.

  Hey Abram,

  What version of Photoshop are you using?

  What operating system do you use?

  ~ UL