No Audio hardware

Similar Questions

• What audio hardware codec supports Satellite A300D-13 has?

  Please, can someone advise me what audio hardware codec in the 300 d-13 Satellite has? I would like to know this, so I can search the alsa compatibility (driver audio linux) before the purchase of the laptop.

  I read in the standard that it has an Audio System high definition, but it is not precise enough.

  For example, I read that a Toshiba A300-14: ' Card: HDA Intel "," chip: Conexant CX20561 (Hermosa).»

  What does a Toshiba Satellite 300 d-13 have?

  Thanks a lot for the help here.

  The chip on the sound card is Conexant CX20561 and you need a Conexant driver

• I get a popup that says no audio device imput found. Make sure that your audio hardware is workingand check your audio configuration in the audio device and sound themes control anel

  I get a popup that says that no sound device imput is to make sure that your audio hardware works and check your audio configuration in the audio device and sound control panel themes

  Hello

  1. what operating system is installed on the computer?

  2. when exactly you receive this pop up?

  3. able to play sounds using Windows Media Player?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the troubleshooting provided in the link below steps to solve the problem.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Unable to read the audio stream: no audio hardware is available, or the hardware is not responding.

  my kids are always downloading music and other things on the internet and some without reason, I lost my sound that I get an error that there is no audio device found... or being used?  This was the last message according to test of microspft race driver and then tried to play something of my documents... Unable to read the audio stream: no audio hardware is available, or the hardware is not responding.  Can you help?  Bill

  (1) try reinstalling the audio drivers from the drivers disk that should
  came with your PC.
  (2) try to do a restore to the point where the problem wasn't there:
  Start > programs > Accessories > system tools > system restore
  (3) download and install the latest driver from the manufacturer's website.
   

  Best regards
  Singapore Web hosting

• Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  Help, please.

  original title: MM not working,.

  Laughing out loud!

  I found the awnser!
  It was two things,
  I have a dell and in some sort when I returned to XP SoundMAX Digital 7 Starter was deleted,.
  Then I got the thing plugged into the wrong entrance!

• Movie Maker error: cannot be used because the audio hardware is not found

  I am trying to use Movie Maker on my lap top, but get the following error: Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  I don't know what is missing, please help

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you to update the audio driver installed on the computer. You can visit the link below for the procedure: how to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• I can't open windows dev, required audio hardware is not detected

  My computer says: "Windows movie maker cannot be used because the required audio hardware is not detected on your computer".

  The audio material is on my computer. I downloaded the audio to youtube, I have changed it to an AVI file with www.zamzar.com

  Can someone help me please?

  It is already very clear. The audio from your computer does not meet the minimum requirements of Windows Movie Maker.

  Hardware audio here refers to the audio device (common examples are Realtek and Conexant High Definition Audio) in your computer and not the audio file you want to add to the film.

  Audio drivers may be damaged or have problems.

  Please tell the following details on your PC-

  * Manufacturer/OEM (HP, Dell, Sony, Acer, MSI, etc..)

  * The series and model

  The information could be useful to find the updated drivers for your audio device.

  Also, press the Windows key + R, type devmgmt.msc and press ENTER. Expand sound, video and game controllers, and then check that your audio device is there. Also, double-click on your audio device, click the general. The State of the device should be "this device works correctly. If it displays errors or problems please post a description of the State of the device with the error code here.

  Also, try to download and install Windows Movie Maker Version 2.6.

• Adobe first CC 2015 reset the Audio hardware settings

  Hello

  I have a curious scenario; I think that it is related to all these discussions about audio problems in first CC 2015. I have a client running a new Mac Pro with CC 2015. It worked fine for several months until last week. First began to change the audio settings in Control Panel preferably on its own. The symptoms are that audio stops completely and video playback stops working as well. You see just a still image from the video. This happens on after 10-15 minutes of editing. We have been able to temporarily fix things in going in the Audio hardware preferences and changing output and input built-in by default. Which only solves the problem for 10-15 minutes well. After that, we need to restart the machine in order to restore playback. This happens with any project.

  My client is running first for 2015 CC version 9.0.0. (247) here's a screenshot of its audio hardware settings and OSX sound control panel.

  

  I think that things should be set to audio built-in by default. But what happens is first keeps changing the default entry, the default output and Master Clock to tell the Audio display fields. Sometimes it shows as DisplayPort as well. Notice that this is different from the output that we defined in the acoustic Panel. We have removed our media Cache files and this always seems to happen.

  Any advice on what is happening?

  Hi André,.

  The 9.0.2 patch for Premiere Pro CC 2015 comes out that has a fix for the Multicam. Please update and verify.

  Premiere Pro CC 2015 update (9.0.2) | First work Pro area

  Vinay

• First CC 2015 - 'no audio output channel valid for found a reading. Please check audio hardware preferences. »

  I just updated from CC 2014v2 until 2015.

  When I open any project or create a new and import any media type - I get a yellow warning at the bottom of the display window showing 'no audio output channel valid for found a reading. Please check audio hardware preferences. "When you press Play, no sound plays and the read head does not move.

  Here is my audio hardware preferences - Realtek is my only option. Everything was going well in 2014 CC this afternoon and I have CS6 installed, which opens and reads the clips and audio without problems while listing the Realtek as the output device.

  

  HP Z820 - Windows 7 64 bit - 128 GB of ram. Adobe apps and system to this day.

  I could solve this problem by removing all plug-in in the directory "C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore", which fixed the problem, then replacing them in batches until the returned error.  In this case, it was an outdated version of an addon Bluefish444.

• "The device has changed and no output channel is present. Open Audio hardware preferences? »

  Hello

  I installed an infusion of SSD and fresh install of Windows 7 64-bit, including the installation of Adobe CC with premiere pro and other related applications. My audio works fine, I have a portable speaker connected to the back of the audio 'line in the green plug' at the back of my office, have not had any problems with her.

  However when opening Adobe PP for the first time I get the message "the device has changed and no output channel is present. You want to open the Audio hardware preferences. At the opening of the entry default preference reads "no devices available (does not). I was unable to change the value by default using the box entrance, but was able to change the default output. I changed the default output to ' speakers (device 2-high definition audio) and after that I got an error that read "sorry a serious error has occurred which caused Adobe PP stopped." We will try to save your work)".

  Is anyone able to help with this, I don't know how to set up the audio setting is all new to me. Also do not know why this has happened given my audio works fine in any other program that I use on my pc. Any help from an expert on this forum would be greatly appreciated. Cheers, Joel.

  

  My first guess is to check and possibly update the audio driver.

• Audio hardware parameters: ASIO kills my output

  Hello. Thanks in advance for your help, and it's here, right to the point.

  Prior information:

  • I have a 5.1 normal speakers that play across the map internal sound on my motherboard.
  • I record with a TASCAM U.S. - 144MKII (USB Audio Interface).

  Problem:

  • When I turn on the ASIO in Audio hardware settings, I can record perfectly, but he can no longer hear the playback of sounds.

  Question:

  • ASIO seems to have only a "peripheral" parameter does not separate the parameters "inputs" and "outputs". How do I use ASIO to configure input devices and output for what they should be (above)?

  Additional info:

  • In Ms. peripheral class menu, it shows my entry as the TASCAM and my output than the speakers, which is how it should be. When I use these settings, I can hear the reading, but I can't save. I can arm a track for recording and see the displacement of indicator levels as I type the microphone, but when I press the (red dot) real record button, it gives me this error message:

  

  Just after I posted, I had a revelation that has solved the problem with the Mrs. I had everything except 96 kHz playback settings in Windows. Now that my input AND output windows are set to the same sampling frequency as the parameters of the hearing TASCAM AND settings of the hardware, it works. I didn't know the output settings of Windows affected anything. I thought that if I could hear playback where ASIO has been set at 96000, then exit Windows settings must be correct, but I was wrong. I think I'll just stay with Ms. settings so I don't have to mess with additional drivers, especially since I really need more or diagnostics options and it not upward quality everything.

  Thanks for all the help.

• XPS M1710 - Audio hardware problem

  I have a XPS M1710, probably close to 10 years. It has been impeccable in the performance over the years. However, one day my audio just stopped working. There a (!) in Device Manager, next to my card its SigmaTel High Definition Audio CODEC. When I go to properties it says the following.

  I am running Windows XP by the way...

  "State of the device.

  Windows has properly loaded this hardware device driver but cannot very well the hardware device (Code 41)"

  I decided to buy a new motherboard and recently installed new motherboard and I have the same exact error.

  I know that this laptop is super old, but that doesn't make any sense to me why the audio is always a failure. I'm going to uninstall the new motherboard and make sure that all connections seem to be good.

  Any other advice? A dead speaker at risk of this or any other material?

  Thank you

  Hello. A faulty speaker would not cause the error message. You could get the codec failed if it failed both the MB origin and replacement. You can test the codec running audio Dell 32-bit diagnostic tests. If you are testing is no longer, and then follow the instructions here to run the external media.

  If the audio tests pass then it's a software problem. It's probably too late to try the Windows system restore, so I would try to re - install the audio driver according to the normal order of the facility would be used after a new OS:

  1. install the Notebook System Software and restart.

  2 install the Intel chipset driver and restart.

  3 reinstall the driver Sigmatel.

  If still no sound but its past tests, then you should get audio back after the next time you perform a system recovery.

• Specify the audio hardware of the default Mac as material for virtual Windows machine

  I have a 2.8 Ghz Core 2 Duo iMac Leopard 10.5.4 Fusion 2.0.1 (recently updated to 1.x) running.  I have an audio interface Firewire (Focusrite Saffire) that I use as my primary audio device for the Mac.  Fusion is used as the audio device that broadcast the Windows.  I want to clarify that Fusion using the internal audio device to the iMac as device Windows plays through.  Is this possible?  The virtual machine settings indicate only that the default audio device as shown in my system preferences will be used by the merger.  Is there a setting in a .vmx file, which can be set to replace?  Thanks in advance.

  Fusion uses virtual hardware, it will use all default hardware Mac configured in the Mac system. You cannot assign all additional devices to the Virtual Machine.

  Kind regards

  Silica V.

• Pavilion 500-130ed documentation, specifically audio hardware

  Hi all

  I own a HP Pavilion 500-130ed (since Dec 2013), with Windows 8, 64-bit.

  So far, I am very satisfied with its performance, but the documentation (on the material of the HP Pavilion 500-130ed) is rather sparse. The specifications refer to 'High Definition Audio 7.1'.

  What I don't understand is how can I use 6 channels, since there are IN, a MIC IN and LINE OUTPUT (a blue, green and pink connector) on the back and a microphone and speakers to the front connector.

  Anyone can shed light on this issue? Is it possible to actually make the 7.1 configuration possible? (For people who are more technical than me; The PNP device ID is HDAUDIO\FUNC_01 & VEN_111D & DEV_76F3 & SUBSYS_103C2AF7 & REV_1002\4 & 2DCAAFFF & 0 & 0001)

  See you soon,.

  Sando

  Sando, welcome to the forum.

  According to the specifications, the built-in sound is 5.1.  Look at the section titled "Sound/Audio".  Here's a guide to help you with your problem.  It's for Win 7, but I do not think that the BONE has made a difference.  Read it carefully and it should help you.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• Audio hardware problem

  So I have a problem with the audio in legacy where audio from things such as spotify or any other audio system does not work unless there is once the effects of the active program. This means that whenever I go to another thing that legacy audio just stops. I had this problem with several computers. I want his problem with the creation of audio material in sequels, but I tried several settings to get the same result every time. I rebooted several times, but it doesn't seem to help.

  I always use headphones if it makes a difference.

  Running after effects CC OSX 10.9.4

  Thank you

  Matt

  I found this.

  After effects CC audio mapping issues

  and delete my settings midi for all applications of CC and restart seem to work, for now anyway.