No Audio signal in order to master with nested sequences

Similar Questions

• I use Windows Movie Maker on Windows 8 computer and when I put in a video and you try to look at it, it appears black with no audio signal. How can I fix it?

  I use Windows Movie Maker on Windows 8 computer and when I put in a video and you try to look at it, it appears black with no audio signal. How can I fix it?

  Hi Michael,

  Thanks for posting your query on the Microsoft Community.

  Because the problem is specific to a particular video file or all the files?

   

  Follow the methods and check them off below if it helps:

  Method 1: Reset the Windows movie maker for default settings and check.
  To restore the default settings

  1. click on Toolsand then click Options.
  2. click on the tab that you want to reset the settings and then click on the default settings.

  Method 2: I suggest you run the audio Troubleshooter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab3&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3: repair of Director and check

  Follow the link as reference below:

  https://support.Microsoft.com/en-us/mats/video_freezes_or_crashes

  Hope this information is useful.

  Thank you.

• Toshiba 32TL933G: No Audio signal in PC mode

  Hello

  I connected my laptop VGA to entry-level PC TV and the Audio output of the laptop to TV Audio IN.
  No Audio in PC-Modus!

  Is it possible to go from Audio IN to the PC Input?
  Now I have a video in PC * GOLD * Sound in EXT2, not together.
  IF not, I will return it

  Nevertheless a beautiful Asian.
  Rudolf

  The fact is that VGA port does not provide the audio but video signal only.
  So if you a TV connected to the computer laptop s port VGA, audio signal would not be provided.
  You need connect the TV with an extra audio cable in order to get the sound.

  The laptop must be connected to the TV s L R taken audio using an audio cable additional of Y. So that you can connect to s portable headphone plug to two L R audio ports that are available on the back of TV s

• No audio signal through HDMI (dv9700t CTO)

  HP Pavilion dv9700t CTO Entertainment Notebook PC / Windows Vista 64-bit

  I put the audio device by default for the device "Realtek Digital Output. I have no sound.

  I've updated the audio drivers on the HP support site. Still no sound via HDMI. (the microphone quality was reduced at the point of being worthless)

  I have updated the drivers with drivers from the site Web of Realtek. Still no sound via HDMI. (I found micro feature)

  The box of bolt that I'm trying to connect to indicates that there is no audio signal passed him from this source (my laptop). I even tried to connect directly to the tv. Which doesn't work anymore.

  Its almost as if there was no link between the audio and HDMI port.

  

  Message edited by Slybo on 12/23/2008 06:22
  Message edited by Slybo on 12/23/2008 06:24

  I have dv9758ca and I have the same problem. No sound with the yamaha receiver. I sound with my LG TV and I tried with an Onkiyo recevier and it worked.

  Once I had the sound on the yamaha (was a flook). the image was running on the TV and the screen of the computer (which is not normal) at the same time. then I concluded that the problem is the HDCP protection. the yamaha recevier is HDCP.

  I've still did not know what the solution is, I just wanted to share my experience

• External Usb Audio Card Popping and cracking sound with Satellite L500

  Greetings,

  My name is Boyan and I am from Bulgaria, and a year ago, I bought a laptop satellite l500 series (I can't tell which is exactly the model at the moment because my computer is not currently with me and my user manual, the only thing that is said is that it is for L505/L500/L500D / L505D.) But from memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal, because I gave him for repairs for the same problem that I say down below)

  The problem with my laptop, is that when I plug in a Usb Audio card in my laptop I have a crackling sound during live sound is played hollow map external speakers/headphones. I tried several sound cards and speakers/headpohnes which work perfectly well with other computers, including laptops, but the problem continues even when I use an external sound card to connect to the laptop not appearing in my laptop speakers/headphones.

  The problem is important only when the signal passes through an external audio card and it is very disruptive since I use my laptop to create music and I bought a sound card expenssive and speakers that can not be used with the laptop. I tried 3 types of sound cards:

  M-Audio Fast Track Pro

  BEHRINGER uca 222

  and a simple 3d audio usb audio card external and the problem persists.

  At first, I thought that the problem is software and I should install the new drivers, windows 7 automatically recognizes and installs the drivers for the devices and I have its in (but with the cracks and educated) so I tried using the official drivers sold for me with the sound cards, but without success: the problem was still there. I tried to find the new drivers of the sound cards on long official distributors and I downloaded it but the problem was still there. Then I tried to delete all the audio drivers on my computer and just use the external sound card for sound but this eighter helps force. I updated my drivers for my sound card build - in as well but again - no luck.

  After substantial thing frist I did when (2 weeks after I bought the laptop) was to contact the store where I bought my audio card and they said that the problem may be so eighter latency or high voltage of the laptop they advised me to try to reduce the latency of the parameters or to try and see if the problem persists if only my laptop running on battery power. I tried two things, and they did not help. Audio cards worked without problems on all the other computers I tried them but me. So they told me that the problem could not be audio cards.

  What I then was that I gave my laptop for the Distributor official of toshiba in my country so that they can solve my problem. What they told me, is that a problem with the version of windows which was preinstalled on my laptop and it was not compitable with the sound cards (which was bizzar survey because I tried them on the same windows and they worked, only on other computers). So I'm back from my laptop and passed under my Windows 7 Home Premium 64 bit operating system to Windows 7 Ultimate edition 64-bit and Windows 7 32-bit Ultimate edition on all versions, that's the problem: whenever I activate a low of passes of audio signal and Audio Usb card he heard cracks and educated. I even tried isntalling Windows XP, but the laptop want spesific SATA drivers for the Windows XP installation which although I found - they helped me install XP and I didn't go the BIOS of the computer to try to put a new and so on, because I'm not sure about that and I could lose my warranty so I said in the official repair shop for Toshiba in my city to put XP on my computer to solve the problem but they can't because they are not liscened to work with software that isn't a recipt for its purchase (which I did not because I bought my windows xp a long time ago and I lost the recipt)

  I gave her to get it repaired for the second time by telling them that the change of my operating system has not solved my problem and what they were doing was they changed the motherboard on my computer, indicating that the build in the device realtek audio on my computer is good enough to support a card usb audio or it may be broken and they change the whole motherboard because the generation of card is stuck, so they did it, but my problem has not been resolved. They told me that although I use and map external audio usb signal always going trough my only internal and I have to disable so I tried to disable this trough Control Panel, but this does not solve the problem and I don't have a BIOS option to disable my sound card build-in. Another thing I thought that maybe the problem is that two audio cards do not work on the same bitrate and Hertz so I put both cards to 16 bit 48000 Hz DVD quality (also tried the other options on the 3 cards that I have) but it's the same thing.

  They told me that it's just my luck and the construction of the sound card does not support this external sound cards and I would had been more careful when they choose to my laptop first.

  I couldn't accept this awnser for several reasons:

  (1) this sound card works on a lower version of windows and are supported by many older models of Realtek and a lot of old computers (one of them bought 2000! and my laptop is of 2010!)

  (2) the guys who were the apperantley of fixing problem don't go so deeply into my problem because they didn't know that in fact the problem was that only they knew that there is a problem with the audio card and the computer interact with them, they knew not that it cracks during the direct play the external audio card.

  (3) I can't accept the fact that Toshiba is manufacturing of models with maps audio chipset that cannot support a simple external Usb Audio card. It is totally unacceptable to me, and I sincerely hope that this is not the case!

  (4) they have tried my audiocards on another laptop of the same series, claiming that they have not at their dispossal at the moment so I'll go tomorrow at a local store and try the sound cards by myself on the same computer in the store.

  What I have now, it was that I gave my laptop for repair requesting a statement of the problem in wrtting with details of the problem so I can go to court or ask for a new laptop, but I'll be charged with little money because according to them there is no problem in the laptop and the problem is that my external sound cards are not compitable with the build in house chipset sound card. If I give my laptop for repair, and there is no hardware problem, I'll have to pay the money. I will do this, but I'm now crazy, because that does not solve my problem and I am wasting time and money.

  What I ask here is, if you can not help me solve my problem and advice me what to do to fix it, please give me the details of the chipset built in Driver sound card on my motherboard, so I can check if it is compitable with my external sound cards and contact the dealers of the sound card to ask them their opinion. Or if you can tell me what it is compitable with and what not, that would be great. Personally, I think this laptop should have no problem at all with a simple external usb running sound card, but I ask you, if you know something more about it.

  If a problem with the build in chipset then Toshiba is manufacturing (or at least sell) audiocards which are not in a normal standart but unfortunately I can not do nothing except complain to Toshiba and never treat whith such productgs more. Otherwise, if this is not true, then my laptop has a problem that is different and I have to go to court with the mans for mounting repair is not my laptop or do not give a new one when I guarantee will not fault of Toshiba and it will be in a way solve my problem.

  I hope that you understand how important it is for me and I hope I have fix the problem as soon as possible.

  P.S

  I want to say that I am familiar with grammar mistakes, that I did in the text below, and I would ask your excuses that I'm not a native speaker of English.

  Hi, I would just say that I had a similar failure although I wouldn't be surprised if she causing of yours, but you never have knowledge, my fault was the lid of my laptop [9 months], it contains the mic and when the lid has been in a certain angle cracks could be heard worse when I got my external sound card all the time it happened, luck, PS, it's a defective membrane [lid to the body] easily missed by engineer because he was the same angle you English is very good

  Post edited by: sido1

• similarity of 2 audio signals

  Hello!

  I m trying to figure out how to get the similarity of the two audio signals in LabVIEW.

  I read the original signal of WAV file and do some operations with it (filtering etc.). After that, I want to know similarity of the signal (spectrogram) original and filtered.

  I don't know about two things: distance correlation and cepstrum (Don t know how to implement).

  I tried the file CrossCorrelation.vi of LabVIEW to compare my spectrograms of two signals, but I m do not know how to evaluate the result (check photo).

  I get some sort of graphic information, but how can I assess it statistically? For example: output is similar to the entrance of 80%...

  Can you show me any direction or advice?

  I have LabVIEW 2013

  I have also attached my VI + WAV signal source.

  

  Commenting on the spectrograms is probably a good start.

  If you are able to define the characteristics that are important, later, then go back and try to implement those measures.

  I think that the Hilbert transform can be used to get an envelope. I did not and am unsure of the theory, but some research can give you some ideas.

  Lynn

• There is no audio signal of chronology in PREL12 the .m2ts files

  Windows 7-64, first 12 items (64 and 32 - the same result)

  Panasonic SC - 920 X camcorder, recoding format 1920x50p + DD5.1

  1. If I just copy the files .mts from an SD card into the PC and import it into PREL then there no problem with audio. It is to play the preview and timeline window.

  But in this case, I have a problem with the long record - camcorder breaks large files.

  So I use the SD instead of the simple copy import.

  2. the import of the SD using PREL12 (Get media of-> cameras Flip, AVCHD,...). In this case I get at disk .mts files and no audio timeline with these files. But in all other programs, these files are played with audio.

  3. import the SD using Panasonic HDWriter program. In this case, I get .m2ts files (and some metadata files.). These files read normally (with audio) in any player and the program I have (WMP, MPC, Corel Video Studio Pro X 6 etc.). Except the chronology of the PREL12.

  There is no audio signal of PREL timeline. And at the same time there is audio of the preview in the same PREL window (after double clicking on the item in the active project)!

  There is no yellow bar above these clips. Project settings - 1980x50p PAL AVCHD

  How to get audio of time?

  dik07

  Something for you to try.

  The quick and very rough to solve this way...

  Expert workspace...

  Before you import your media into the project, set the predefined project manually to

  PAL

  AVCHD

  Full HD 1080i25 5.1 channels

  To manually set the project preset

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to match the properties of the source media. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.

  And then import your source files in the project by the different ways you have tried and found not to work for your application.

  If it works, then the real solution...

  Premiere Elements does not come with a preset project to PAL AVCHD AVCHD 1080 p 50 5.1 channels.

  But, you can create one for use if gross suggests you need a project that is pre-configured with 5.1 channels included in its description. Please see details

  RTA Premiere Elements troubleshooting: PE11: export a file 1080 p 50 or 1080 p 60 with Audio to 5.1 channels

  Let know us the results and then we can decide what then.

  Thank you.

  RTA

• Help! You are ordering photo book with pictures 1.0.1

  I can't finish my order a photobook with pictures 1.0.1 (urgent!)

  I have compiled, press BUY BOOK, move to the system asking me to you connect using my ID Apple (OK) and it starts to 'ALLOW' then stops and asks me to enter my Apple (OK) registered credit card security code.

  I enter this info, then get a message that says "the credit card associated with this Apple ID is assigned to the Bank of Australia. If you change the store, you will need to place the order again. »

  As I checked the store "Australia" in the preferences of Photos AND have an Australian listed billing/shipping address I hit continue.

  When exactly does nothing... the retractable window disappears and the process seems to have cancelled itself.

  What I am doing wrong?

  Re-enter all your account information, including payment information (do not check but just go)-usually that can solve these questions

  LN

• Why? Reminders app does ' t order of tasks with a priority higher on top more.

  Reminders app does ' t order of tasks with higher on top priority. First of all he did, now he doesn't. On my iMac and iPhone. Do I have to change the settings?

  On the Mac, look at the view menu. Select sort by, and then priority.

  I think that the iPad and iPhone reminders program takes its look at a landmark of the computer.

• How to get AC 97 Front Panel Audio and Microphone ports to work with Windows 8

  I have a m7277c HP Media Center that uses the motherboard Asus P5LP-(Lithium-UL8E) and has an Audio Jack and Microphone AC 97 spec ports on the front panel. I tried to install the Codec AC 97 drivers for Windows 7 and they do not work for Windows 8. The 'High Definition Audio Codec"Windows 8 drivers only work for the Ports on the rear panel, not the Ports on the front panel.

  How can I get AC 97 Front Panel Audio and Microphone ports to work with Windows 8?

  Hello

  Your model has not been tested for the use of Windows 8.

  For this reason, HP cannot provide instructions to upgrade or Windows 8 pilots.

  Therefore, it will be very difficult to provide a solution.

  Thank you

• Converts the audio signals of the mydaq in discrete values

  Hi guys!

  I'm currently building a project that accepts mydaq audio signals. I wanted to analog signals it have descrete peak values. Is this possible? I intend to use the discrete peak values and sum their place by using a registry change instead of the peaks. I think it is easier.

  Any suggestions would be helpful. Thank you very much!

  "".. "in the end we all hopes"...

  FalseHope wrote:

  Yes it detects peaks. but I can't use the peaks detected for something else. He's right there showing me the summits. But I wanted to use these pics for something else, and then to summarize. If there is anything I can do in the peaks detected so that I can use it and summarize, please tell me.

  Yes, the Ridge detector shows you where are the tops.  Now use a loop FOR autoindex on where are the tops for the level in those places.  Now you have a table to the top.  You can then use add table items to add them together.

• Can I connect a link more MXI for PXI-1033 card in order to work with it

  Ladies and gentlemen,

  Tell me please that I can plug a card of MXI link more in the PXI-1033 chassis in order to work with it.

  In other words, I don't use the built-in controller for MXI and want to work with the NI PXI-8366 MXI-Express and PXI-1033.

  Thank you.

  The answer to your question is no. The question that must be taken into consideration is the type of housing, we have access to on the PXI-1033. To use a PXI MXI card for control purposes in a PXI system, we need to use the card in a slot of system controller (denoted by a triangle around the number of slots on the chassis). With the 1033 however, we have no access to slots control. Because of the connection of controller MXI incorporated, we only have access to a calendar/trigger and devices slots.

  Is there a particular reason you don't want to use on the 1033 MXI connection, or you just want to avoid having to change the connection to another computer?  Single MXI cards which would depend on the space available on the PXI-1033 would be something along the lines of the 8367 and 8367, who are used to the Garland of a separate chassis.

• NOR-USB 9229: How audio signal acquisition?

  Hello

  It's one of those stupid beginner questions I use a module OR 9229 USB to capture the audio output of my computer line as follows:

  -left line-out goes to AI0 +.

  -right line output goes to AI1 +.

  -land line out of is divided into two and goes to AI0 - and AI1 -.

  What is the correct way of wiring?

  In case it is, I have (I think) have problems audio signal acquisition. In the Measurement & Automation Explore, I creates a task for the acquisition of voltage AI0 (44100 Hz, etc.) -nothing is displayed on the graph when I run the task! (I have music running on the computer during the measurement) Otherwise, the 9229 flashes green, seems to be ok, auto test work, etc..

  Someone has an idea what I am doing wrong?

  Thank you!

  Hi acgrama,

  That sounds like it should give you a signal any (not an empty graph or a flat line at 0 V), but the USB-9229 is not very suitable for audio:

  • The USB-9229 to entry level is of +/-60 V. A line level audio signal will use a small fraction of that. Of the USB-9229 precision and plug noise are adequate for your application?
  • The USB-9229 can't acquire them exactly 44.1 kech. / s. It supports some 50 kech sampling frequencies. / s divided by a number between 1 and 31, as 50 kech. / s, 25 kech. / s, 16.7 kech. / s and so on. When you specify a sampling clock DAQmx not taking in charge, he is forced to the top supported next, which in this case is 50 kech. / s. (you can read back the SampClk.Rate property to see what DAQmx forced the rate to.) For 44.1 kHz audio to USB-9229, you will need to re - sample the acquired data (which are specific to the programming environment).

  Assuming that you're just trying to do it for learning or experimentation, here are a few ideas:

  • Is the line connector configured as an output line? Many mothers today have reassignables audio connectors.
  • The volume of the source (wave, CD, whatever) high enough?
  • On the graph, is scaling auto turned on? If you display data in a table instead, are the numbers exactly 0 or any close?
  • The output of the line works if you are connecting to another device that is designed to handle signals to line level?
  • If you connect a battery (AA, 9V, whatever) for the USB-9229 instead, read the Max supply voltage?

  Brad

• my Dell studio 17 audio does not play on tv with hdmi connected but the video is very good

  I have an old Dell Studio 17 tour with dual processors core T6400 4gig and every time that I plug the HDMI on an external device, the sound disappears on the pc and the tv for 2 years, but the video is great. It never worked, but was not important until lately. Even though I attribute the correct connection including video and audio, no luck.

  Check with Dell support. It may still be under warranty.
  http://www.Dell.com/support

  Thank you

  Marilyn

• ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location

  ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location. I want to connect a second monitor, can I use the parent connections card currently have coverage through them that say "do not remove"?

  Hello

  If you use an adapter, then you have the choice on the end to use the adapter based on the adapter that you use. Buy cable HDMI to DVI and save frustration adapter problems and possible.