No Boot screen

Similar Questions

• HP w1907: implementation gets stuck to the 'HP invent' blue Boot Screen

  Hi all
  
  I have HP w1907 desktop... I use it since 2008.
  Last month I format to have the new windows 7 in it... Previously I was also working with win7 Ultimate.

  But it's keep restarting after the use of 4-5 minutes and so I installed the entire operating system yet.

  It worked very well... after 3-4 weeks, when I started it, it gets stuck at the 'HP invent' blue Boot Screen.

  This display has the instructions to enter the "Boot Menu", "Setup" and "System Recovery" by pressing key "F11" aor "Esc", "F10".  It is just there for ever.

  If I try to enter the 'Boot' Menu by pressing the 'Esc' key, I get the message "Loading Boot Menu... ", but then it hangs there forever just.  If I try to enter the "Setup" Menu, I get a similar result - it says 'enter the Setup... ". "and just hangs there.  By pressing the "F11" key does not seem to do anything.

  Any ideas on how to solve this problem?

  Searching the forums I tried to reset the BIOS - who I've got from here:

  http://h30434.www3.HP.com/T5/desktop-lockups-freezes-hangs/powering-up-gets-stuck-at-Blue-quot-HP-in...
  
  and
  
  http://support.HP.com/us-en/document/c01080282
  
  After doing this too, the result is null

  Please help me...

  I'm in a hurry...

  Thank you.

  Date and the incorrect time can certainly cause problems.  What happens usually, however, is that the sites Web will not be opened because the State in which the certificate is not up-to-date.  I have not heard of the time and date causing the computer does not start.  I think that you need to change the CMOS battery.  Here's a guide on how to change it.  The guide has also some good troubleshooting information.

  Once the battery has been replaced, we'll see what happens.

• Qosmio F30 starts with blue stripes during Vista boot screen

  My Qosmio F30-114 runs for years without problem with Vista Ultimate.

  In recent days, there is a huge problem.

  The Qosmio starts with blue stripes during vista boot screen.

  So I deleted the driver for the graphics card and used the standard vga driver for the card. the wizard of material found one driver on the system.
  For a brief moment, I was very lucky.

  After a reboot, there was a blue screen. After the next restard again once the driver to the standard vga card.

  What can I do?

  The download section of toshiba has no drivers for graphics card.
  And really... I wonder - how it works every year without problems...

  Someone at - it a solution?

  thanx

  toshibalover ;-)

  Hello!

  First you have this problem on an external monitor too or only on the screen internal? Maybe it s is not a graphics card problem so check it with an external monitor.

  I checked the Web from Toshiba site and I can find drivers for the Qosmio F30:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite C660 - 1ME - the missing BIOS boot screen

  I updated the BIOS on my Toshiba satellite C660 - 1ME to version 1.20 - WINNER of the Web from Toshiba site.
  After the missing BIOS boot screen, so that now my laptop starts directly with the Windows startup screen

  I tried pressing any key at startup, but nothing happened
  I tried to re - install the BIOS (old and even new version), but I got error that I have "identical or newer BIOS version..."

  can you help me please?

  > I tried pressing any key at startup, but nothing happened
  You mean F2, F8 or F12?

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• Remove vista boot screen

  Hello

  I'm planning a check disk to run at reboot, but I couldn't see the activity and results of the operation of check disk because of the vista boot screen.  I never noticed this problem before.  However, I wonder if anyone knows how to disable.

  I thought about the gui option not via the msconfig Panel. But if I remember that this simply deletes completely out the screen during the boot process.

  Thank you.

  Answer: Disable "no GUI" in the Panel under the msconfig Startup tab.

  Apparently, in the activation of vista "no GUI" allows the vista aurora boot / splash screen, thus hiding the start menu, check it out operations on disk and memory diagnostics.

  Under xp, which allows 'no GUI' blacked out on the screen and hidden from the above process.  But in Vista, rather than be a screen blacked out, vista boot screen is engaged.

  As my question, in some sort 'no GUI' was enabled without my knowledge.  So I could not see the background process during startup.

• How can I remove a dual boot screen at startup

  My system is Windows 7 Edition running Home premium.  I transfer an ISO file (Debian) to import cheap Stick Drive on my DVD, using Img Burn and an error has occurred on the stick reader.  This intern created a dual boot screen.  There is no evidence of the files on my hard drive.  Well the screen double boot has only a selection Win-7.  I want F8 allows to access the o/s course, when I start.  Now, how can I get rid of this double splash screen and make, automatically start directly on Win - 7 and still be able to use F8.  As it used to be at the origin?

  Thank you for your help.

  Thomas

  Watch your EasyBCD entry that says displaybootmenu and he says Yes:

  

  You may need to wait for the selection of the user defined in EasyBCD.

  In EasyBCD, choose edit Boot Menu set it to look like this and save:

  

  Display settings then again:

  

  Note that if you don't have an OS installed and used EasyBCD to wait for selection the user makes the msconfig Startup tab look like this:

  

  But you can not enter this field-1 and you cannot change it to zero (should be between 3 and 999) but if you turn off your displaybootmenu in EasyBCD, it sets the time msconfig to zero.

  Oh Yes...  F8 for advanced startup options-access still works fine.

• I want to change my windows 7 boot screen resualution.

  HY deuds! I want to change my windows 7 boot screen resualution. I have a moniter of 22 inches with 1920 x 1080. And the resualution of splash screen is 400 x... And I want to change to 1920 x 1080. Can someone help me?

  At the beginning of the start-up procedure, pilots of Windows screen do not run. The screen resolution is VGA base until drivers kick in...

• Change Windows 7 boot screen

  Change the Windows 7 boot screen?    Step by step... Please

  Not the logon screen... Thank you!!!

  There is a way.

  http://www.coderforlife.com/projects/win7boot/

  But it's for Advanced users. Don't forget to make a backup of all the system files you replace or change.

• HP pavilion dv6-1245dx won't boot screen logo, grid screen, caps lock, shift and numluck work

  * little background, my laptop works well before it happened, I stopped and then tried to power it using after a minute I Gilles down, it starts and then when I try to use internet, the display suddenly blacked out, thought it was the power so I tried to power it again I get is bright with no logo so I turn it on and turn it on again then it became lines graph form tried to check if keyboard works numlock and capslock not working when I press it, ang wireless volume does not work

  HP pavilion dv6-1245dx won't boot screen logo, grid screen, caps lock, shift, and numluck work.

  I tried to remove the battery and press hold power button almost 60 sec to reset the bios always the same, I tried the reinstallation of the memory 2 still the same please help

  problem solved... saw something on the forum about pressing f10 or f11 I randomly pressed start magically work

• Implementation gets stuck to the 'HP invent' blue Boot Screen

  I have a HP Pavilion a6332f desktop PC.

  In Windows, I changed the drive letter of the DVD drive to 'F' to 'Z', and now when I reboot the PC, it gets loaded is stuck on the blue screen 'HP invent '.  This display has the instructions to enter the "Boot Menu", "Setup" and "System Recovery" by pressing key "F11" aor "Esc", "F10".  It is just there for ever.

  If I try to enter the 'Boot' Menu by pressing the 'Esc' key, I get the message "Loading Boot Menu... ", but then it hangs there forever just.  If I try to enter the "Setup" Menu, I get a similar result - it says 'enter the Setup... ". "and just hangs there.  By pressing the "F11" key does not seem to do anything.

  Any ideas on how to solve this problem?

  Thank you

  Dan

  Spawn1155 wrote: I have a similar problem, have a HP pavillion a1101n starts fine, but after running for a while, if for some reason I have stopped (not restart) the pc, it will freeze on the screen hp for about 10 minutes and then turns off on its own. If I wait about an hour and a half, it will start fine. Restart does not have to do this, it happens only when the pc is turned off and you try to turn back before an hour and a half.

  Hello Spawn1155, the problem you describe seems to be more than a heat issue than anything else.

  I checked the specs of your system, which can be found here , and it shows that the system was published in May 2005.

  This indicates that it is a little old system and could very well have a good amount of dust/dirt accumulation in the case.

  I unplug the power cord, remove the side panel and clean the dust/dirt from the inside of the case, paying particular attention to all heatsinh/CPU fan. You can acquire some canned compressed air to clean the radiator/fan to the processor set.

  After cleaning the system, try it for a while and see if that solved the problem. If she did not, you may need to restore the software on the system, due to possible corruption. While I do not think that the syytem has a problem of software corruption, she is always better with a new installation of the software after several years of use, if this has not already been done.

• Satellite Pro L20: No boot screen

  I have Toshiba Satellite laptop & for some reason any recently there is no boot menu or screen. Once windows has loaded the screen works fine but my windows is corrupt & I want to reinstall I can not do this in windows because of the errors & I cannot access the BIOS menu or even see the multiboot menu.

  I wonder if a BIOS update will fix this, but I have to do this blind because I have nothing on the screen.

  Can someone tell me what I have to press on if I had to do a blind update? Or is there another way to solve this problem (no boot menu screen).

  Thank you

  Hello

  You want to boot from the CD drive. Am I wrong?
  In this case you can press F12 immediately after starting the laptop, and then the start menu should appear. Then you can choose the device you want to start.

  The other possibility is to press the C key. There is an option to boot from the CD drive.

• PC laptop Pavilion 15: freezing boot screen after installing Visual Studio 2015

  Hi all

  I have a problem on my laptop which is the startup screen freezing after installing Hyper-V on Windows Pro 8.1. Actully I need because it is used by Visual Studio 2015 do Andriod device emulator work

  After a search internet I found that this problem is caused by the driver Ralink Bluetooth and common

  I'm also thinking that I can boot windows successfully when I disable virtualization BIOS, so I logged on windows and I have tried a few solutions

  1. Disable Bluetooth device-> does not

  2 - Install the latest Ralink driver-> does not

  3. Remove VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00-> work but the returned key after that restart so I have to delete this key, everytime I open windows, and more that's a problem with virtual switches on Hyper-V

  Any solution permanent please?

  Hello

  Which driver Ralink, have you tried?

  I discovered Mediatek drivers which are no longer updated.

  Not sure if that helps in your case with Visual Studio.

  Here is the link:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71572.exe

• Cannot get past Boot Screen manufacturer

  I can't get my g62-149wm to go beyond the HP screen. I tried to hit escape to go into the boot options and f10 to enter the BIOS but nothing happens. It is blocked here. Anyone have any ideas?

  Do like me. I had to buy a SATA docking station, and then start on a live usb Sabayon linux (without the internal hdd is present) and back up all the data on my external hard drive. After the backup, I just formatted the internal hard drive and recovery DVDs to restore factory settings.

  You can also do a new installation or anything else you want because the laptop must be initiated with the hard drive in it. I don't have any other PC to make a back up so had to use this usb flash drive or a live cd (needs all flash usb plugged) with linux on it.

• Can I use my .iso in Windows 8, but are unable to right boot screen!

  I would like my HP TouchSmart 520-1031 to Windows 8. Impossible to get to the screen to start USB boot. I used the Fn keys to try to do. NOT good. My splash screen does not function Fn key to do this, and it starts too soon. What happened with that anyway? How to fix this or that?

  Please see the settings of the BIOS for the motherboard Angelino2, HP PC - UEFI and the Start Menuand desktop HP - upgrade from Windows 7 to Windows 8 for more information on access to BIOS, access to the "Boot Menu" and questions you may encouter during the upgrade to Windows 8.

  Not all the features of Windows 8 may be available on all Windows 7 computers. Your computer may require hardware, software, firmware or upgrade the BIOS to install and run Windows 8.

  Secure boot is not available on any computer or HP consumer desktop computer all-in-One.

  If you purchased your computer before October 1, 2011, HP has not tested or developed the drivers for your model computer. Therefore, an upgrade of your computer may be difficult, if not impossible.

  HP recommends to install the 64 bit version of Windows 8 for desktop computers.

  Not all the features of Windows 8 will be available on all computers, and your particular experience with Windows 8 is determined by the capabilities of your computer.

  Software designed for Windows 7 systems or previous operating may not work after installing Windows 8.

  HP provides a compatible software Windows 8 and drivers updated to support only specific computer models.

  You may not be able to watch movies on DVD after the upgrade. If you currently use a DVD codec to play DVD movies, such as the encoder that comes with Windows 7 Professional, this encoder are not available after the upgrade to Windows 8. To continue to read the DVD after upgrading, go to http://windows.microsoft.com/en-US/windows-8/feature-packs to download Windows Media Center or purchase a DVD playback software.
  If you are currently using HP's DVD playback software, the installation process of Windows 8 helps you determine if your playback software is compatible with Windows 8, or if an update is required. If the software is compatible and you perform an upgrade in place, you have the option to keep this software during the upgrade. If you perform a clean installation, you must reinstall the software after the upgrade.

  Windows 7 PCs with touch won't fully Windows 8 touch features after upgrade. HP PC with touch input material designed for Windows 7 will provide a comparable experience to point applications to touch only two after the upgrade to Windows 8. Computers Windows HP with touch input material will not support Windows 8 applications that require more than two simultaneous points of contact.

  WARNING: HP Linkup, Wizard of Application HP, HP TouchSmart Magic Canvas and all other HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before the upgrade. Content created using the TouchSmart applications as Graffiti will be unavailable after the upgrade

  In general, pressing "ESC" to light, will bring up a menu of about 6 items, as shown in the example below;

  

  Press "F9" key when on this menu to access the Menu "Boot". Select the boot device you want to use the "Start menu", as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation