No closure of sites on the stop

Similar Questions

• For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  Hello. Try a few troubleshooting steps here: get help with Mail on iPhone, iPad and iPod touch - Apple Support

• HP Officejet Pro X476dw: Printer will print-elements are sitting in the queue, but the unit stops before printing

  The printer starts as it will print but then stops. The elements are sitting in the queue, so they are sent to the printer. I turned on and out and unplugged to reset. No error message. Connection to the local network.

  Hello

  Download and run the utility HP Print and Scan Dr. link below to solve the problem.

  www.HP.com/go/Tools

• How can I stop the crawlers and the display of the url of the site of the trial?

  I read about this a few months ago and can't seem to find it in the knowledge base.

  I added a domain name to my site of the trial and the address of the original trial is now see in the search results.  Can someone tell me how I can prevent crawlers and hide the url of the search results?

  Test: http://galleryofjewels.worldsecuresystems.com/

  With added field, want to show this area only in search results: http://www.Gallery-of-jewels.com/

  Thank you

  Nancy

  Liam,

  I see in the list field, my new domain with and without www. more galleryofjewels.worldsecuresystems.com (secure) and galleryofjewels.businesscatalyst.com (System)

  Should I replace galleryofjewels.businesscatalyst.com (System) with Gallery - of - jewels.com?  and

  galleryofjewels.worldsecuresystems.com (secure) with Gallery - of - jewels.com?

  

  Thank you

  Nancy

• How can I get rid of this by-side split screen, where it displays two sites at the same time, covering the major part of one of them to the top?

  Right now, I look at my screen and this mozilla site occupies the right hand of 75% of the screen. On the left hand 25% of my screen, I see a part of the site of scholarship that I want to see and I can't close the window on the right side of the screen without stopping completely from Mozilla. I know this has something to do with the settings, because it happened when I was messing around with the settings but I can't reverse the trend of tha. Thank you!!!

  Opening in the sidebar is the default value for the bookmarks created via a link or a button on a Web site.
  You can view the properties of a bookmark using the context menu in the side bar (Ctrl + B; Command + B on Mac).
  In the Bookmark Manager (Bookmarks > show all bookmarks) you can click on the button more in the lower details pane on the right.
  Make sure "Load this bookmark in the sidebar" is not selected.

• Can't remember password option not fails to add the site to the list of Exceptions

  In Firefox 24.0, I visit a Web site and enter the name of user and password. Popup asks me if I want to remember the password. I select never save password for this Site. I logout and log back plug-in software component. After you have entered the name of user and password, I still wonder if I want to remember password.

  Privacy tab: always use incognito mode is disabled

  Security tab: when I click on Exceptions, there is nothing displayed in the popup window

  How can I get FF to add the site to the exceptions list so that it stops to ask if I want to remember password whenever I visit your site?

  Figured it out. Seems the https sites are treated differently in the newer versions of the FF. To the left of the address in the address bar is a key. When I click the button, it asks if I want to remember the password. If I choose to never remember the password, it will then add the site to the exceptions list.

  I of course can't see anything on this new feature when I searched the support before entering my question. Is there a web page that I forgot?

• Trying to leave my site of the Fund, I get an error message:

  "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. Script: http://www.aftrasagfcu.org/toolkit/presentation/shell/aftrasag/assets/default.js:265. »

  Is this a Firefox 9.01 or Web site problem? I've never had a problem using Firefox on this site. Thank you.

  Seems to be a problem with Firefox 9. I see the same on Linux. Beta versions of Firefox 10 also has the problem. Firefox 8 and Firefox 11 + (Aurora and nightly) do not have this problem. It looks like a bug that has been fixed, but did not land on the branch of Firefox 10 beta at least so far. So there's not much to do about it apart from the stop of the script.

• WiFi connection falls back only when the Satellite L650 is sitting on the glass desk

  Since I bought a new Ikea glass desk, free wifi on my laptop Toshiba has been stalling. It took me a while to put the two together.

  Whenever I'm sitting there on the desk, wifi is de-energized, but as soon as I took it off the table, wifi will reconnect immediately and it works normally.

  I used it on a covered with _wooden in the same region and it works completely fine and never gave up.

  I recently bought a Toshiba wireless mouse which said seller works on any surface. Well, it doesn't work on my glass desk and I had to buy a mousepad for that and now it works...

  I'm using Windows 7 Home Edition premium on a Toshiba Satellite L650 laptop computer model No.: PSK1JA - 0K 3017.

  Please help me solve this problem! What can I do to stop falling out wifi while it sits on the glass desk? All responses are much appreciated thanks!

  Hi Chan

  I m very surprised after reading your interesting ad. To be honest, I use Toshiba laptops for a long time now and I ve never used on glass desk so I don't have any experience with this issue and I also think that you are the first person that relates to this topic.

  It's a really new and very interesting information. I m really interested on this thread and I would like to hear more of other people who use the glass desk.
  What to do about it? Simple question, but I fear none of us can give you good advice on this topic m.

  OK it's a nothing with your question, but if you use it on the desktop you can use the connection to the LAN? I mean that if you may have a kind of Home Office you must connect using the connection to the local network. I do though that the WLAN router is active.

• T430 slowly at the stop

  I have multiple T430 in my company who are slow to stop. It takes about 10 minutes to the stop. It is also consistent, as soon as you open a session and stop it take too long. These are all installed with an image. Running windows 7 64 bit. Looked in the log events, but no indication of abnormal errors. With the help of Kaspersky, Office 2010, Mozy. Check some registry settings on microsofts site but that does not solve the problem no more. Not sure if this is a problem of lenovo, or a windows problem or a conflict with other software.

  Uninstalled Kaspersky, it corrects the problem. Was caused by a part of kaspersky called patchmanagment.exe.

• How to reset a regulator to behind the scenes at the stop of the VI

  Hello world

  Hope someone can help me with this (very new to LabView I m) issue:

  I have a loop to control speed (exactly the moment of rotation) of an engine. Just an analog output to a data acquisition device is connected to the motor controller. If I run the VI and to define for example a speed of 50% (= 5 V Analog out) and I close the VI, the DAQ hardware still holds this value for time without end. How can I reset the cursor to '0' when the stop/closure of the VI that my engine stop?

  By the way a "stupid" question: what is the common way to stop a VI? Should be a button 'Cancel' which stops all loops or what to do with the Labview menu "stop"?

  Thank you very much for your answers!

  Markus

  You must control your data flow.

  You could do something like the example attached - is this solved your problem?

  (You must configure your DAQ assistant once again, as I changed it)

  We have a lot of free online training in LabVIEW.

  http://digital.NI.com/src.nsf/Ttitle?OpenView&node=203014_us

  3-hour course:

  http://www.NI.com/white-paper/5243/en

  course of 6 hours:

  http://www.NI.com/white-paper/5241/en

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Whenever I have print to the shared printer on my desktop Windows 7, the print job will just sit in the print queue.

  Whenever I have print to the shared printer on my desktop Windows 7, the print job will just sit in the print queue.  If I stop and then start the print spooler, the job will print.  It happens from an XP laptop. Print jobs sent from the computer Windows 7 local print just fine.

  How can I solve this one?  :(

  
  

  This problem with some windows running portable computer particular Xp and windows 7 family

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you can not print over the network. I will try to help you with this question.

  (1) did you make any changes before the show?

  (2) you receive an error message/code?

  I wish that return you these items for you help in detail.

  Method 1: Open printer troubleshooting.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 3: Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Also applies to Windows 7

  Method 4: Troubleshoot network printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Also applies to Windows 7

  Method 5: File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Update Windows (KB2820197) (KB2829530) cumulative security update of the stop bits vista x64bit assets?

  May 21, 2013

  I tried several day of now to install updates for windows (KB2820197) and (KB2829530). Here is the 'important' for most of the OS?  Need help with "active x killbits for windows vista x 64 bit systems based Cumulative security update". and "Internet Explorer 9. Server 2008 SP2.

  cumulative security update x 64-bit based system". I have put a lot of effort in this situation and need to know who has an answer.

  email = * address email is removed from the privacy *

  June 8, 2013

  With the effort on the problem of update, I put my situation is resolved! / I will provide the step by steps and links to follow.

  Step-(1)    To solve the (KB2820197) and updated cumulative (KB2829530) activates the stop bits X do the folllowing.  Microsoft Download Center and run the "System Update Readiness Tool. This tool is for Windows Vista x64bit systems (KB947821). May 2013.

  http://Windows.Microsoft.com/en-US/Windows7/ Vista /What-is-the-System-Update-Readiness-Tool? It is a standalone Hotfix for Windows Updates and allows for updates to install correctly. Step 2. SFC Scan http://support.Microsoft.com/kb/929833 first cl'k. Start, accessories and then click command prompt. (You must run this tool with administrator rights). When 'Back in black' window opens, you want to get the cursor flashing / then type in "sfc/scannow" and press ENTER. Microsoft located on-site or corrupt files and replace/move with the right Microsoft files. (Vista and windows - 7). Step 3 uninstall 3rd party security program. Please read the full discussion here: http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/list-of-anti-malware-product-removal-tools/407bf6da-C05D-4546-8788-0aa4c25a1f91 4 step manually download and install mode ' Safe "(enregistrement, arrêt, fermer tout ce que vous souhaitez conserver)."» http://support.Microsoft.com/kb/973135 Clean boot: http://support.Microsoft.com/kb/331796 Step 5. rename Software Distribution and Catroot2 See under method manual here (method 2 and 10): http://support.Microsoft.com/kb/822798 Step 6. Install the update in built-in Administrator http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-enable-the-built-in-Administrator-account/67922948-62b9-4AC0-ba1f-12e9454d231b?auth=1 If you are not able to go online or met a problem with Internet Explorer: http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9 You can use this link to make your computer faster: http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=9B9RKrhSEv0 You can download this Microsoft Security Scanner to search for infections: http://www.Microsoft.com/security/scanner/en-us/default.aspx Direct them; Ronald a. Curns, Maine

• Traffic redirect Internet from the remote site on the main site using the tunel of vpn ipsec

  Hi all

  I have a problem to redirect internet traffic from my remote to the main site by the IPSEC VPN tunnel. The remote site is a Cisco 2801 router with ios (c2800nm-advipservicesk9 - mz.124 - 22.T) and the remote site has ios (C870-ADVSECURITYK9-M, Version 12.4 (15) T12, fc3 SOFTWARE VERSION). This redirect does not work and the last jump with extended traceroute form the remote site is the ip wan of the main site.

  Is there someone who can help me with the right settings this redirection via VPN?

  the remote site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 8

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpndgsn 10 ipsec-isakmp crypto map

  Description at HQ

  set of peer 41.223.X.X

  Set transform-set vpn

  match address VPNHQ

  !

  interface FastEthernet0

  IP 41.223.X.X 255.255.255.0

  NAT outside IP

  IP virtual-reassembly

  IP tcp adjust-mss 1300

  automatic duplex

  automatic speed

  vpndgsn card crypto

  !

  interface FastEthernet 4

  192.168.11.1 IP address 255.255.255.0

  IP nat inside

  no ip virtual-reassembly

  !

  IP route 0.0.0.0 0.0.0.0 41.223.X.X

  VPNHQ extended IP access list

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  the main site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpncreo 10 ipsec-isakmp crypto map

  Description FOR bastos

  set of peer 41.205.X.X

  Set transform-set vpn

  match address 110

  !

  interface FastEthernet0/0

  Description OF WAN

  IP 41.223.X.X 255.255.255.240

  NAT outside IP

  IP tcp adjust-mss 1492

  vpncreo card crypto

  !

  interface FastEthernet0/1

  Description OF LAN

  IP 192.168.10.1 255.255.255.0

  IP nat inside

  automatic duplex

  automatic speed

  !

  overload of IP nat inside source list NAT interface FastEthernet0/0

  IP route 0.0.0.0 0.0.0.0 41.223.31.241

  access-list 110 permit ip any 192.168.11.0 0.0.0.255

  NAT extended IP access list

  deny ip 192.168.10.0 0.0.0.255 192.168.11.0 0.0.0.255 any

  permit ip 192.168.10.0 0.0.0.255 any

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  You must configure the routing policy based closure for NAT can be invoked on the main site.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml

  Additionally, make sure that you don't do any NATing at your remote end, IE: you must configure the NAT exemption for all traffic from 192.168.11.0/24 to any (Internet).

  Hope that helps.

• 9.0.2 CF multi server config, IIS site uses the connector bad, how do I change the connector to point to its own instance of CF

  Hello

  Yesterday, I found that an IIS site that is supposed to be connected to its own instance of CF is actually connected to another instance of CF. Our configuration is the following

  Windows Server 2008 R2, Coldfusion 9.0.2 Multi server enterprise edition, IIS 7

  Instances of ColdFusion: P1, P2, V1

  Clusters: Primaire1: contains P1 & P2

  Site1 IIS Web site is connected to the Cluster primaire1

  Site2 IIS Web site is connected instance CF V1

  I myself stopped instance CF V1, but IIS V1 site was still running. After much digging, I found this site V1 is not actually connected to the CF P1, an instance of CF V1 instance. I used the web site1 at CF instance V1 connection configuration tool. In IIS the JWildCardHandler site1 points to \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. JWildCardHandler for site2 points to the same directory \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. Here is my dilemma. How can I get JWildCardHandler site2 to point to its own folder under \JRun4\lib\wsconfig, say 14 instead of 3. I don't want to use the web config tool becauseI don't know if it will delete the folder ...\webconfig\3 if another site is still using it. I saw the web configuration tool remove the folder when you remove this connector in the tool.

  So I thought that I would try to manually configure the connectors. That's what I did

  Copy the folder wsconfig\3 wsconfig\14

  en...\wsconfig\wsconfig.properties - ensured site2 exist and referenced instance CF V1

  ...\wsconfig\14\jrun_iis6_wildcard.ini

  serverstore = /JRun4/lib/wsconfig/14jrunserver.store

  127.0.0.1:51007 = bootstrap - 51007 is the port of the proxy that the JRun Management Console is instance CF V1

  ... \wsconfig\jrunserver. Store

  proxyservers = (in file #3 set for P1 and P2 proxy ports)

  
  

  Then, I went into IIS and changed JWildCardHandler from site2 to \JRun4\lib\wsconfig\14 \jrun_iis6_wildcard.dll instead of \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. After you restart IIS sites site1 or site2 came. I went back in and came back JWildCardHandler back to the \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll site2 and they both come. I think that I restarted CF both times, but really forget that I was in a bit of fashion panic.

  
  

  Is that what sounds like it should work? Does anyone know of any files that I missed trying to configure site2 to point to the CF V1 instance? Any ideas are appreciated.

  
  

  Joe

  
  

  What I understood why 2 Web sites were using the same instance of Coldfusion. 2 Web sites share the same files, sharing the same web.config file. Change the JWildCardHandler, in IIS, for a website has changed the web.config file that is shared by both sites. If I find a way around it, I'll post my solution in case anyone else runs into this situation.

  Joe