No connection via L2L on RA VPN

Similar Questions

• To access the branches connected to the main office using VPN L2L by RA VPN

  Hi all

  I am trying to configure access to several remote sites for users that VPN in our main data center.  The data center has a 5520, and branches are connected via L2L IPSec VPN.  All branches have 5505 or 5510.  Remote users use IPSec via the remote Client to Cisco.  In our data center works and L2L VPN remote access are perfect... only now that I need remote users access to branches

  after remote access VPNing (of support), I can't work the part.

  Any help would be appreciated!

  Thank you

  Vpn client access management office subnet via the main ASA site, you must configure the following:

  (1) If you have split tunnel, it must include the branch subnet in the tunnel of split ACL.

  2) allow to "permit same-security-traffic intra-interface" on the main ASA site.

  (3) configure the pool of the vpn client subnet in the lan-to-lan tunnel to the branch.

  On the main site, crypto ACL to one of the branch should say:

  ip licensing

  On the site of the Directorate, crypto ACL to the main site should say:

  ip licensing

  (4) on the site of the Directorate, should also include NAT exemption between the branch subnet to the pool of the vpn subnet.

  (5) after all the changes above, you need to clear the tunnel, so the ipsec lan-to-lan tunnel recover with the new subnet included.

  Hope that helps.

• Can connect via the VPN, but cannot see the files

  I can connect via VPN to my company network, but the files do not arise under Vista. I have no problem to see them on my old Windows PC, so this is a specific problem of Vista. On my old system, just click on computer and it shows me my company on the network's records. No Vista - cannot find anywhere, even if I am connected via VPN. Where are they?

  Hello

  Since it is the network of the company, there is no way to know hwo security is configured, unless you are a computer scientist in society.

  Not "mess up" your computer, first talking to the person in charge of VPN connections.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• slow when they are connected via anyconnect VPN, ASA OS 9.0

  Hi guys

  My users are complaining that they are experience slowness when they are connected via vpn anyconnect for ASA os 9.x, 5 Mb files tikes 15 mts rough with them, even if these users also have a connection broadband on their place

  any guy insight

  Thank you

  Hi Ibrahim.

  My first suggestion to you is to follow the recommendations of Cisco, associated with latency problems.

  hostname (config) #-group attributes policy
  hostname (config-Group-Policy) #webvpn
  hostname (config-group-webvpn) select #svc dtls
  hostname (config-group-webvpn) #svc df-bit-ignore enable
  hostname (config-group-webvpn) #svc routing-filtering-ignore enable
  hostname (config-group-webvpn) mtu #svc 1200
  hostname (config-group-webvpn) #svc compression no

  (a more recent version, you can use the command "anyconnect" instead of "svc")

  If after this the problem persists please let me know when is the right time to reproduce the problem and collect the balls, debugs and catches. I also need the current configuration of the SAA (see technology in a txt file)

  Kind regards

  Aditya

  Please evaluate the useful messages.

• Unable to connect via the Cisco VPN Client

  Hello

  I have configured remote access VPN to ASA and tries to connect via the Cisco VPN Client 5.0

  I am not able to connect and watch the journal on the SAA

  ASA-3-713902: Group = xxxxx, IP = x.x.x.x, withdrawal homologous peer table is placed, no match!

  ASA-4-713903: Group = xxxxx, IP x.x.x.x, error: impossible to rmeove PeerTblEntry

  ASA does not support the K9 i.e. VPN - DES is enabled and VPN-3DES-AES is disabled.

  What could be the reason.

  Concerning

  Hi, I had this same problem, here is the solution:

  When you perform a debug crypto isakmp 255, so you see that the cisco vpn client does not support SHA +, you must use MD5 + AN or sha with 3DES/AES.

  Be careful, this debugging is very talkative, but that's the only way I found to get ITS proposal on debugging.

  Well, change your strategy using MD5 isakmp / OF would do the trick.

• Client VPN will travel not connected via 877w

  Hello

  I've implemented a Cisco 877w and it works very well for web access

  Client VPN on my laptop connects via the 877w and authenticates on my remote work ASA5510 firewall.

  Problem is after you connect to the ASA, I can not connect anything internally work network (10.0.0.0/24), ping, etc. RDP is back with no answer.

  I've attached the config, can someone tell me what I am missing, might access a list?

  Thanks for your help

  Chris

  This router is made PAT/NAT, Ipsec blocking.

  Activate Nat on the ASA course remote.

  ISAKMP nat - t or crypto isakmp nat - t

  HTH

  Sangaré

  Pls rate helpful messages

• If a PC with a DHCP server is connected via VPN, with her serve IP addresses on the tunnel?

  Situation: we have a few portable computers test Ubuntu running DHCP servers.  We need get the updates and other changes in corporate network sometimes.  Today, we turn off the DHCP server, set up to get an IP via DHCP (besides) and make our updates.

  Problem: we do not want someone accidentally connect the laptop to the corporate network, while its DHCP server is running.

  Question: so, if we go via wifi using a Cisco VPN client, the DHCP server IP addresses above the tunnel?

  Thanks for reading.

  N ° DHCP uses layer 2 broadcasts to disseminate IP addresses.  Because your clients are connected via VPN, there is no contiguity of layer 2.  The only way he would accidentally do it is if you have configured an address to support IP dhcp as one of your VPN clients on the network, which I imagine you wouldn't.

• Financial reports - 11.1.2.1 client - connects via VPN only?

  Hello
  
  When I'm directly connected to the network or connected via their intranet wireless, I can connect to fin reports customer of Studio. However, if I train via VPN (Juniper), he returns with a message: you are not authorized to access. Please contact your system administrator. It is a mistake to end too many reports? Any ideas why/how this could happen?

  It is possible that your VPN is not open ports that you can use EN Studio.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to connect via IP MX200

  Hello world. I have a problem with point to point connectivity between two end points. We have 1 st MX200 endpoint that is registered in VCS with it's own sip uri and the second is independent endpoint connected via vpn. What 2nd endpoing person trying to make a call using the ip address of the connection to a 1 set and everything works fine. But when I try to make a call using 2nd connection ip address of endpoints only showing a few errors of sip. Between intellectual property is very well. We cannot save this 2nd endpoing for our VCS. What could be the problem and how can solve this problem?

  Thank you

  1 endpoint registered with its own SIP URI, then I guess the 2nd endpoint 1 calls endpoint using the URI and no IP (that would be the logical way to do)?

  Since it seems that you are not using a VCS-C/VCS-E deployment, "Called to unknown IP addresses" must be on "Live" on the VCS.

  Note also when calling an IP using SIP, IP address should be prefixed by something @ - 'something' can literally be absolutely anything, i.e. [email protected]/ * / _endpoint_IP_address.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• IPSec on the Client TCP connections via USB

  We have a problem (and I noticed that several other people here are as well) to our users of broadband remote is not not able to connect. We just recently started getting complaints from users at home XP they were getting errors while trying to connect to the hub.

  To begin troubleshooting we moved our hub 3015 outside our firewall temporarily. Users were still unable to connect. After some additional troubleshooting, we were able to successfully reproduce this problem by simply changing the VPN client to users of IPsec over TCP to IPsec over UDP.

  Then, we tried to identify why she passed to some customers, but not all. In the end, the only thing we could find really different was that customers who have a USB port to connect to the network instead of a correct Ethernet port cannot connect via IPSec over TCP. We have tested and verified on several operating systems, including Windows 2000, XP Home and XP PRO. We have also tested and verified with multiple VPN Clients including 3.5.1 and 3.6.3b.

  The end result is that all case users who use a type USB connection cannot connect via IPSec over TCP. All users who connect through a correct Ethernet adapter are able to connect via another method.

  Our problem is that we cannot run UDP connections behind our firewall without conversion on NAT. We send a client preconfigured to our users which forces to use tcp port udp by default 10000 10000 verses. We do this for several reasons, but the most important of them is our firewall will not redirect sessions IPSec UDP, IPSec TCP sessions only.

  Leaving the VPN concentrator outside the firewall and exposed is not an option. So, I find myself with say to all my users USB that is the only way that they can connect to install an Ethernet card, which ultimately is not really much of an option considering expenditure and technical knowledge necessary to pull it off the coast with hundreds of individuals it just will not fly.

  So, this brings me to this forum. Before I open a TAC case I hear experts to try to determine as closely as possible, if this is a problem of Microsoft or Cisco VPN client. I have my suspicions that this is owned by Microsoft, but I can't prove anything yet. Does anyone else have an idea on this? Please, I invite everyone to test this out and let us know what you find. If you would like more details on the methodology please let me know and I would be happy to provide it. I think it is potentially a huge problem only by the number of complaints I've seen in this forum. My supervisor thinks I smoking something when I try to explain this to him. All he can say is "if it was really a problem, more people would certainly also, and you would have heard about it now, it must be in your configuration." GO FIX"(does all this sound familiar?)

  I appreciate all of the comments that everyone is willing to give. I think that if we as a community get together on this we can find a solution.

  Thanks for your time!

  It is a bug, use the bugtool kit to see bug CSCdv00229.

• If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

  After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

  Hi Pharao-nael,

  I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

  Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
  Configure and use third-party Bluetooth - Apple Support Accessories
  

  Turn off pairing a Bluetooth accessory

  To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

  When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

  Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:
  

  Pair your device with a Bluetooth accessory

  1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
  2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
  3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

  When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

  Thank you for using communities of Apple Support, cheers!

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• Simultaneous connect via Dock and via Bluetooth?

  Forgive the newbie question, but I use my Iphone6 to connect to my stereo system through a dock and also want to connect via Bluetooth to a speaker in a room? This can be done? Thank you!

  # You can only select an output for the audio stream. You cannot output audio to the dock and bluetooth connector at the same time.

• How to disable automatic updates of ios connected via wifi

  How to disable automatic updates of ios connected via wifi

  1. Open the settings app.
  2. Push App and iTunes Store.
  3. In the automatic downloads section, you will see an element called updates.
  4. Press the switch to turn it off

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?