No ethernet on R40-2897-GWU

Similar Questions

• R40 2897-34u wifi configuration

  I formatted my hard drive and reinstalled Windows XP. I need help my WiFi.

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-59438

  After you download it, you must go to C > drivers > win > Wlanint and run the Setup file from there.

  I hope this helps.

• R40 does not connect wireless WPA

  my system is:

  Product: ThinkPad R40 2897 B4U [change]

  Operating system: Windows XP [change]

  Original description: P M 1.4 GHz, 256 MB RAM, 40 GB 4200 RPM HARD drive, XGA(1024x768) 15 TFT LCD, 32 MB ATI Radeon 7500, 24x10x24x/8 x CD-RW/DVD, Intel 802. 11B wireless (MPCI), Modem (CDC), 10/100 Ethernet (LOM), UltraNav, Secure Chip (TCPA), IEEE 1394, 8-cell Li-ion, WinXP Pro

  I am tring to understand how to connect to the wireless network with WPA.

  everything I've tried so far fails.

  BTW - I reinstalled the system (via Access IBM) and then installed the Windows XP SP3.

  Thanks for the help

  Yariv

  Well - I'm happy to say that my machine works with WPA.

  I downloaded the latest driver and the last IBM Wireless Connection Manager.

  When you use Connection Manager, I have the ability to use WPA. in windows (zero configuratoin, it still doesn't work)

  In addition, I had to change my router to support the types b & g (it was set to "g only").

  Thank you everyone

  and I hope this will help others.

• Can not find the updated driver for Intel PRO Wireless LAN 2100 3B for R40

  I can't find the good updated software listed for my R40 on the Lenovo site. The Device Manager shows my card wireless as:
  Intel PRO Wireless LAN 2100 3B Mini PCI Adapter but I can not find the model listed in the update list.

  My R40 description is by Lenovo site is:
  Product: ThinkPad R40 2897 B4U
  Operating system: Windows XP

  Original description: P M 1.4 GHz, 256 MB RAM, 40 GB 4200 RPM drive HARD, XGA(1024x768) 15 TFT LCD, 32 MB ATI Radeon 7500, 24x10x24x/8 x CD-RW/DVD, Intel 802. 11B wireless (MPCI), Modem (CDC), 10/100 Ethernet (LOM), UltraNav, Secure Chip (TCPA), IEEE 1394, 8-cell Li-ion, WinXP Pro

  Lenovo driver update page, I have the following choices:

  Network: R40, R40e wireless
  (1) mini PCI driver of cisco Wireless LAN

  (2) high rate Wireless LAN Mini-PCI Adapter III
  Note: The models ThinkPad R40 2681, 2682, 2683

  (3) dual-Band 802.11ab and 802.11abg wireless LAN Mini PCI adapt

  (4) Intel PRO/Wireless LAN 2100 3B Mini PCI adapt
  Note: The models ThinkPad R40 2722, 2724 only, 2723

  My card is listed for models 2722 2723 and 2724 ONLY.

  Here is the direct link to the driver page http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-46024R40.

  Device Manager shows that I currently have the Intel of the installed driver version: 07/03/2003, version 1.1.5.0

  Can anyone help on what version of the software update I should use?

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-59438

  After you download it, make sure you unpack it in the following directory: C > drivers > win > Wlanint

  I hope this helps.

• Recognition of password

  I have a ThinkPad R40-2897-93ü.  I fixed the DC power connector and then turn the computer back together, when I turn it on I get a message from 0176 ereror (the computer has been tampered with).  The power icon - the password is displayed.  When I enter the password used for more than a year, it is no longer recognized, and I have no way to get into the bios.  Is repairing the DC connector considered tampering and thaere a way to fix the problem that someone may have also known.

  Thanks for the help!

  Stan

  Stan wrote:

  I have a ThinkPad R40-2897-93ü.  I fixed the DC power connector and then turn the computer back together, when I turn it on I get a message from 0176 ereror (the computer has been tampered with).  The power icon - the password is displayed.  When I enter the password used for more than a year, it is no longer recognized, and I have no way to get into the bios.  Is repairing the DC connector considered tampering and thaere a way to fix the problem that someone may have also known.

  Thanks for the help!

  Stan

  Have you swapped the DC-In cable completely or tried to fix something yourself?

• R40 hard drive failure cause ethernet controller problem?

  
  
  

• R40 with wifi Phillips

  Hello I have a R40 2681 # cto. I have a Phillips/Anatel (PCI) wifi card # PH11107-e (91 p 7265). The computer considers it, and he calls an Ethernet controller. I was not able to locate the drivers for it. I was told that it came out a R40. I have an another R40 that I installed and card intel and the unit would not start gave me the 1802 error. I got that stop so he could start. I was hoping to avoid that, with this card and boots fine. I just need drivers.

  Welcome to the forum!

  Your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67214

  After you download it, you must go to C > drivers > win > Wlanath and run the Setup file from there.

  I hope this helps.

• number of virtual ethernet adapater by machine Maximus virtual vsphere

  Hi, need to know the number of maximus of adapater to virtual ethernet by virtual machine in vmware vsphere.thanks

  10 is the maximum.

  Take a look at the maximum configuration of vSphere guide: http://www.vmware.com/pdf/vsphere4/r40/vsp_40_config_max.pdf

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Ethernet, says "cable disconnected".

  Ethernet, says "cable disconnected" I looked at a few posts... but they are old messages and say, update to 3.28.2, mine is Articles 3.30.1

  Referring you to update to 3.28.2? Where do you get this error message? Your iMac still running OS X Lion mountain 10.8.1? What exact model is your iMac?

• After the upgrade to USB 3 Hub Ethernet Sierra is no longer works

  On my mid-2015 15 "MBP, I have a Sitecom CN - 340 USB 3 Docking station. Apart from all kinds of outputs, it has an Ethernet port, which I've been using for the last 6 months without any problems... until the update for Sierra. Since then, the report of control center that the cable is not connected. I am now connected via Thunderbolt. Has anyone noticed this too? And then knows how to fix? The latest drivers are February 2016.

  Kind regards

  Oliver Holmes

  It turns out that the problem is so the driver being old-fashioned. The chipset is the AX88179 and the manufacturer provides its own drivers here: http://www.asix.com.tw/download.php?sub=driverdetail & PItemID = 131

  So, all is well again.

  See you soon,.

  Oliver Holmes

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• How can Hello I just transfer program from a laptop to a desktop iMac computer using an Ethernet cable

  Hello

  How can I transfer a single program and its content from a laptop computer to an iMac using an Ethernet cable

  You can network or target mode a mac computer

  OS X Lion mountain: connect to shared computers and servers for files on a network

  Share files between two computers with target - Apple Support disk mode

  However, to transfer a program is not the user data (music, photos, etc.), you must follow the directions of developers and license agreements. Some programs need to be seen to withdraw their authorization, some don't, but most require a clean install to write the necessary components in the correct places, otherwise if you are 'slide' from one place to another, you can easily inherent problems of this method.

• Ethernet to the airport also on?

  I have my Mac connected directly to our home Airport Extreme via an ethernet cable. That same Airport Extreme acts as our main wifi router. Until recently, I didn't cause to turn on the wifi of the handiest airport on my Mac, but I have to if I want to use the new Sierra "unlock with Apple Watch" and copy and paste between the characteristics of devices, that which I want to be able to use.

  My question is, is my default Mac using the connection of the cable as my internet source or have two internet connections active will complicate things?  Is there a way to prevent the Mac to use the wifi for the internet, but still have it on for the other features it offers?

  Thank you.

  Nevermind, I found the answer outside this area communities:

  http://www.Macworld.com/article/3039842/Macs/can-you-use-Wi-Fi-and-Ethernet-on-a - mac-to-the-same-SystemRoot\Cluster\Reports\Validation

  You can dictate the order of preference for which network source is used in settings > network on your Mac. By moving "Ethernet" upward, your Mac always uses the Ethernet Wifi or any other sources listed below, as long as the Ethernet is an active connection. If something happen with your Ethernet connection (cable comes off, maybe) your default settings for Mac to the next source in the list that has an active connection.

  Apparently there is nothing wrong with having active ethernet and wifi connections at the same time.

• Ethernet questions

  So I don't know what is happening but I had an internet outage the other day for about 36 hours when some construction cut my ISP ADSL line and never feel things acted like weird, but from what I can tell it's my 4th gen time capsule at fault.

  Only 1 of the 3 ethernet ports seems to put on the internet. I use the other to my basement, and it sometimes says it's on the right of the network with no internet access, but most of the time just says unidentified network, no internet access. He worked all day but seems to just decide he doesn't want to chance.

  The other problem is that the TC itself appears to be loss of connection randomly with flashing orange. When reset, it works again. Don't know what is happening here. I use a PPPOE set up to connect via the TC; the ADSL modem is connected via Ethernet. Nothing has changed on my end, this could be a service provider because of the failure?

  Thank you

  Also, the modem is a router?

  What is the make and model?

  I use it as a router and try again with just the bridge the TC.

  PPPOE can be problematic.

  Ethernet ports can blow... If you get a tip to the top of the line... then we can take any ethernet port connected to both... If that includes the Port of the TC WAN no longer functions as a router.

  You have a little work to understand the question... but another router is key.

• Unable to connect to the internet using Ethernet

  I have a Mac mini as I try to connect via Ethernet cable to a modem Comcast Arris TG862. I was connected via Wifi without problem (with the exception of the slower speeds). I know that the Ethernet ports on the back of the modem seem to work, since I can listen to my TV, etc. In settings > network Ethernet shows as green and connected and gives me an IP address, but as soon as I turn off Wifi no web page doesn't load.

  What I am doing wrong? I thought that it would just connect. On the Ethernet port lights, which I think means data transfer. Otherwise, I need to tell Firefox or Chrome to turn to the Ethernet connection?

  Thank you!

  The default configuration is to have the WiFi over Ethernet in the Service order.

  The order must be set such that the (desired) primary service is at the top of the list and the backup service is below.

  If you look at the order of service when it is connected to the network, the higher is the provision of access Internet one (or at least, he thinks Yes).

  To set the order, click on the menu of the machine and choose the order of Service. Move Ethernet to the top of the list. This should make it primary unless he loses the connection.

  However, it must move up Ethernet and provide a connection when you have turned off the WiFi. When you disable WiFi on the Mac, the Ethernet connection move to the top of the list and show a green connection?