No found readers - controller SCSI problem

Similar Questions

• Migration of VMware player for ESXi strike SCSi problem

  Hello

  I'm just a newbee with VMware.

  First, I installed Centos 6.2 on VMware Player.

  Then I download the Virtual Machine on Esxi5 U1 directory using the VMware client. (not the converter)

  Then I tried to use the VHD with creating new virtual machine on ESXi.

  But I got an error with scsi controller when I turn on the machine verual. (i.e. apparently guest OS cannot handle the controller scsi.)

  I tried all types of (e.g., LS logical parallel) scsi controller in the choice, but all are omitted.

  Is there someone like a solution for this problem.

  Josephino

  Welcome

  Using vmware converter standalone will solve your problem.

  try to download https://my.vmware.com/group/vmware/evalcenter?p=converter

  GL

  Thread moved to VMware ESXi 5 to converter

• Set controller SCSI-type VirtualLsiLogicSAS

  When im getting an error message when im trying to set the type of controller Scsi to VirtualLsiSAS:

  WARNING: Changing the type of the virtual machine boot disk controller prevents the VM to start properly.

  And his is not the change of re-congfigure, leaving the BusLogic controller parallel perfom and continues with the script. Anyone seen this before?

  Hello

  First of all I will file a bug for the warning - this is not correct and it's too scary. The idea of the warning message is that if you change your boot HARD drive controller, it is possible the OS have problems with the start-up of the guest.

  We cannot reporoduce your question in our test environment, it will be useful if you share your information:

  -VM machine-> 4 or 7 Version?

  -ID - WinXP, Win2003 VM, etc.?

  -What is the version of your ESX? I see you have vCenter 4.1 but he could handle older versions of ESX.

  -Have you tried the same operation with the graphical clieant? Is he here?

  And finally, I think you can try this line as a workaround:

  Get - VM testvm | Get-hard drive | New-controller SCSI-Type VirtualLsiLogic - BusSharingMode NoSharing

  This line creates the new controller and remove the existing. Pass the desired values - Type and - BusSharingMode parameters.

  Kind regards

  Vitali

  Team PowerCLI

• Win 2008 R2 X 64 - HDD SCSI problem

  Hello

  I tried the version of VMware Workstation 7, and I found a very strange problem.

  I downloaded the iso rating of the Site Microsoft's Windows 2008 R2 x 64.

  When I create a new virtual machine, select compatibility, and then select the type of the operating system to install, select Windows Server 2008 x 64 rx.

  When I start the virtual machine for operating system installazioe can not find the HARD drive has returned the error that cannot find the Disc.

  When creating the VM, I left everything on recommendations, here I find myself with: LSI Logic SAS (Reccomanded) and SCSI (Reccomanded).

  I tried to go with sharing usb drivers, to find the driver but not install.

  LSIMPT_SCSI_W2k8_1.28.03.zip - LSI logic-

  LSImpt_SAS_SRV08_P16_13002.zip - LSI logic SAS-

  Workstation 7 (trial version) is installed on Windows XP 32-bit and the BIOS I've activated the VT from Intel.

  I think that the driver that is required is for the CD - not for SCSI drives.

  This happens every two days - first has the correct size of ISO?

  There was no end of corrupt downloads reports

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Pavilion 15-ab063tx: 15-ab063tx Pavilion network controller driver problem

  Hello

  I just bought a new 15-ab063tx Pavilion and after format, I have a wireless network connection problem. For the network local network it works well but I can't find the wireless network adapter. On the device he received the error this network controller driver problem. Can someone help me.

  Realtek Wireless:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4158

  Bluetooth:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_147638_1&swEnvOid=4158

• Drive hard internal not found to fix this problem, try reinstalling the drive

  So I get the error message: internal hard drive not found to fix this problem try reinstalling the drive

  Once I got the error, I removed my 1 TB HARD drive and replaced by a 525 GB SSD and I still get the error. After testing the original 1 TD drive HARD, has nothing wrong with him, so it seems to be something wrong with the computer itself.

  I ran the PSA test and it does not detect any problems with the hard drive and no other errors.

  What could be?

  Edit: I have the Dell XPS 15 9530

  The fixed. The BIOS has been updated with virtualization, so we turned off and also removed the SSD of 32 GB.

• internal hard disk not found, to solve this problem try reinstalling the drive... Help, please

  I have a Dell Inspiron 1440 use for 2010 all of a sudden, I saw this error message 'drive hard internal found to solve this problem try to reinstall the drive' when I turned it on. Then I tested with other other laptop HARD disk drive and it starts fine. Then realized that the HARD drive was taken, at the bottom, a new samsung SSD 120 GB drive and installed on my laptop and try to install Windows 7 from a CD see always the same error when turned on.

  Please help with this question.

  Thanks in advance

  ROHIT

  Thank you guys!

  My bad after I installed the drive SSD the CD that was in the DVD player was the CD for Applications/drivers instead of Windows 7 disc. I just realized and installed Win7 on my new hard drive, my laptop is back to normal. Thank God! I saved 500 to get the new laptop.

• Create the virtual machine with the type of controller SCSI LSI logic SAS with PowerCLi

  Hey guys,.

  IM the difficulty to create a virtual machine with the type of controller SCSI to "LSI Logic SAS". The cmdlet New - VM im struggling to find where to create the type of controller?

  If you create a virtual machine without specifying a disk it will create a 4 GB SCSI type thick (0:0) hard drive 1 with 0 Parrall default BusLogic SCSI controller.

  What im wanting to do is to create a disk hard which is thin Prov. and create SCSI LSI logic SAS controller is set to.

  New-VM -name VMSTORE23 -$vmhost $esxhost MemoryMB- 4096 NumCpu- 2 -NetworkName "Vlan 6 Machine Virtual Network" | Get-NetworkAdapter | Set-NetworkAdapter -Type Vmxnet3 -MacAddress '00:50:56:00:00:21' -confirm:$false

  I have recived of aid by some LucD who helped direct the value of the network card in the New - VM cmdlet as follows. But I'm not able to add a hose for hard disk also like:

  | Get-hard drive | Together-hard drive - Datastore $datastore - slim StorageFormat

  And I have no idea how change the type of SCSI conroller or create it with the correct configuration?

  Any help would be great,

  Thanks in advance

  Eddie

  Greetings, steddyeddie-

  You should be able to use Set - hard drive and SCSI controller Set cmdlets to set the storage format of your hard drive and the SCSI controller type, respectively.  You were close to on the part of game - hard drive .  Try something like:

  ## get the VM object $vmVMSTORE23 = Get-VM VMSTORE23 ## set the harddisk storageformat to thin$vmVMSTORE23 | Get-HardDisk | Set-HardDisk -StorageFormat Thin ## set the SCSI controller type$vmVMSTORE23 | Get-ScsiController | Set-ScsiController -Type VirtualLsiLogicSAS
  

  It could pack in to your existing order to keep it as a good word, but for readability.

  Enjoy

• Eurotherm EPower controller: query problem

  Hello

  I have a problem with communicating with a controller Eurotherm EPower (with 4 units) by OPC server.

  I use:

  -LV 8.5.1

  -iTools OPC Server 7.50 with a number of product formed the social reason (active license)

  -EPower Firmware v3.01

  Communication between LV and OPC server is made by "DataSocket write" and "Read DataSocket".

  I can write => values without problem I only write Main.SP on the evolution of events user and everything's fine.

  But on reading, I would like to read Meas.I Meas.P, Meas.V, continuous for each unit (up to 12 url request)

  The first reading is ok, so I have values, the url are ok. But after that, it is impossible to put in a loop-online no error, (status = 0 on LV and OPC Server) but the values are not updated with the following query.

  I tried to play with the option "wait for updated value", but without success.

  The only way I've found is to open the interface for server, the device, right click and select "Synchronize Active device". But this option is only a shot and very long because, I guess, he gets everything in the device...

  Another point: it works perfectly with the Engineering Studio, commonly called iTools-iTools. It is a client of the OPC server on my application.

  Another point on the other: when I run my application is the ID_EPower.exe in the list of Windows processes and consume resources (0 or 1%) so he lives.

  Complete, with one hour, I thank them but not way with Eurotherm hotline.

  My question is: Y at - it a particular way to obtain ongoing measures such as sending a query each time or a general property to get updated data?

  I used to cruise control disc from the same manufacturer with no problem and no need to send a request to get the values, but here it is perhaps a different case.

  List of requested URL:

  OPC:/Eurotherm.ModbusServer.1/CLA_Gradateurs.192-168-1-222-502-ID001-ePower.network.1.MEAs.V

  OPC:/Eurotherm.ModbusServer.1/CLA_Gradateurs.192-168-1-222-502-ID001-ePower.network.1.MEAs.I

  OPC:/Eurotherm.ModbusServer.1/CLA_Gradateurs.192-168-1-222-502-ID001-ePower.network.1.MEAs.P

  OPC:/Eurotherm.ModbusServer.1/CLA_Gradateurs.192-168-1-222-502-ID001-ePower.network.2.MEAs.V

  OPC:/Eurotherm.ModbusServer.1/CLA_Gradateurs.192-168-1-222-502-ID001-ePower.network.2.MEAs.I

  OPC:/Eurotherm.ModbusServer.1/CLA_Gradateurs.192-168-1-222-502-ID001-ePower.network.2.MEAs.P

  ... Ditto for network 3 and 4

  I joined the part of the code that is dedicated for the reading of values, but it is not really helpful because I think that my method of reading is correct (data arrive but are never updated) is a 'lack' of command to request that the server acquires new data or a bug with the LV-iTools OPC server interface...

  For LabViewers advanced, I know that my attached code is not optimized and not the smartest, but keep cool, I do not need crazy performance

  Any suggestion?

  So, I was not on the spot for the tests, but now it's ok.

  Several series shares have been made to the walkthrough to the problem, but it's hard to know if all were beneficial:

  -An update of software Eurotherm: 7.50 to 7.68

  -An update of the firmware EPower: 3.01 to 3.03

  - and probably the main cause of the problem: change the cable through a cross-wired (we thought it was, but not in reality...). But even if it is the main cause: how it was possible to receive data by forcing the update in the OPC server... strange.

  Thanks for your help.

• USB - If xHCI USB host controller driver problem

  My new Windows 8 in Sony VAIO found the problem with the USB - IF xHCI USB host controller driver, who couldn't reinstall Windows. What should do? I have not done the recovery discs! Please answer...

  Thank you

  I saw this post today and the information provided helped me to solve this problem.

  Click here

  http://www.eightforums.com/hardware-drivers/17161-Intel-wiusb-driver-not-working-properly.html

  The link essentially says to visit the Intel Web site and use the Intel driver update utility. The utility automatically searches your computer for devices that are eligible for an update. Hope this helps you because it has helped me. Also I have updated my wireless driver while I was using the Intel drivers update utility as a newer driver has recently been made available.

  It worked for me; However, I ended up having to uninstall the old drivers Intel WiDi, then by restarting my computer before the setup.exe file would go and install on my computer (dell inspiron). I created a restore point in case it did not work, but everything seems to work smoothly!

  I must also stress that just remove the driver Intel WiDi also got rid of the yellow exclamation, and unless you plan to try to connect wirelessly to your computer to your TV, I don't think it's something you need. Here is a link that explains what is the driver:

  http://www.Intel.com/content/www/us/en/architecture-and-technology/Intel-wireless-display.html

• No valid MX was found - is this a problem for my own hosting service or Thunderbird?

  I can send emails anywhere EXCEPT to [email protected] - when I get a failure message "No valid MX found".
  Is this a problem with Thunderbird or 1 with & 1 Internet hosting my email address?

  I hope someone can help me. I need to know how to fix it!

  Thanks to you all.

  If it is a new area, it could take days for all the necessary name servers get all the DNS records that they need. However registration in 2014 would indicate it is not this new http://www.dnsstuff.com/tools#whois| type = domain & & value =southcoaststeel.co.uk

  I'm guessing that your e-mail provider has an old record of server name without an MX record. Although the MX record support for the field is quite uneven see http://www.dnsstuff.com/tools#ispCacheLookup| type = domain & & value =southcoaststeel.co.uk& & recordType = MX

  They have a MX now, although the domain configuration does not appear to be other issues such as no record has. See http://www.dnsstuff.com/tools#dnsReport. type = domain & & value =southcoaststeel.co.uk

• Satellite A60 found new hardware wizzard problems

  Hi, I am the owner of a Satellite a60 laptop I recently formatted my hard drive with windows xp because I have done what I have problems with the new found hardware wizzard.on, try to install the software for my i - pod and bt travel 1065 PC laptop wireless adapter that I get the text next message "new hardware wizzard." found it impossible to install this material the hardware was not installed because the wizard cannot find the necessary software"in this case, even when the cd is in the drive could you possibly tell me what could be the cause could there be a missing driver?

  Hello

  Unfortunately I didn t try to still configure the i - pod, but try to activate the option check the CD directly or check if maybe some setup.exe file is available on the CD and it must be installed before connecting external devices.

• Not found network controller

  Hello

  I have a HP 17-F049NB and reinstalled Windows 7 from scratch.

  Everything seems to be working except the Wi - Fi: Windows brand the network controller is not known with the little yellow question mark and I can't find any driver whichon could solve my problem.

  There is no description of the material in the field of retail, this watch is 'Network controller' so I really have a hard time on this problem.

  I'm on it since this morning and run out of ideas so I guess that I need help.

  News of the computer:

  Ref: HP 17-F049NB

  REF of the motherboard: Hewlett-Packard 227F 77.15

  Product no.: J3S43EA #UUG

  If more detailed information there just ask.

  Thanks in advance.

  Hello:

  Here are links to the drivers you need:

  Wireless:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.TPST=swdMain&s...

  You also need this bluetooth driver...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405371&SP...

   

• Not found network controller driver, the hp proBook 4530 s, Windows 7

  I use a laptop (4530 proBook s), with Windows 7, 64-bit and in Device Manager I get a yellow exclamation in the network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN driver (s). The packacge driver extracted himself, and there is no confirmation of the installation of finishing.

  The problem started after an update of the BIOS by the wizard of support from hp on my pc

  Hello:

  Here is the link for the driver you need for your wireless card.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  Paul

• Game controller hardware problems

  I have a Logitech Dual Action Gamepad controller and it worked for a few days. Then, suddenly, my laptop stopped recognizing when I would plug it into my computer (Note: I have not received the message "USB not recognized", it does not simply his or work). There is no data from the hardware controller in my folder of controller and despite the relocation of my material, not even will try to read the controller. I contacted Microsoft hotline and ran the automated troubleshooting Service. My controller has worked... but only for about four seconds, then more nothing. Tried to run help desk automated by Microsoft again, this time it has nothing and I am at square one not having the hardware at all. I know this is a rather confusing situation, but I hope someone can help me. I can't get the halp from anywhere else. Believe me when I say that I have tried. Thank you in advance.

  Hello BloodyShadow,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  The question you posted seems to be hardware related. Unfortunately, we are unable to help with changes to the hardware.  Please contact the manufacturer for assistance.

  However, it seems that the controller that was purchased is bad, I suggest that return you it to the store you bought it and try to get an exchange policy stores.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.