No more BSOD problems!

Similar Questions

• Re: BSOD problem was detected on the Satellite L40 - 14N

  Hello

  have been unable to fix a fault on my laptop. BSOD problem has been detected and windows has shut down. I was told by someone that this was resolved when they replaced their hard drive.

  Could someone tell me what hard drive I need to get?
  Once I have to get one and put it in the machine should it restarts just using the system recovery disk, because it is what I have provided with or will it get other new software?

  I hope someone can help. Really lost without a laptop!

  Hello Netties

  Please do not be angry on me, but I do not understand why you start the second wire on the same issue. All this can be clarified on your original on this BSOD problem thread.

  In any case, if you have a warranty valid, please don't spend your money for the new hardware before clarify you this with maintainer authorized Toshiba. Maybe you are right on HARD drive, but please first check with the ASP.

• the volume appears to contain one or more unrecoverabble problems

  I had a windows pc wth dual boot XP after that I did a system restore to a date that precedes a installed the second version of windows XP my computer start your ups Loopy I can't start in safe mode. I started upward with the recvory cd en windows got massage when I did a chkdsk. the volume appears to contain one or more unrecoverabble problems

  FIXBOOT cannot open the partition

  I had installed a new version on the patition even.

  When I start my PC after the windows screen reboot pc looped you.

  I solved the problem with BartPe. I did a chkdsk and now my pc works well

• Blue screen and after forced registry errors stops under XP, "volume contains one or more unrecoverable problems".

  Hello!  My computer hung on me for quite some time, so a few days ago I had no choice but to make a closed group.  Now, I can't even as much as screen (with the blue bar and the Windows logo).  I tried the following:

  (a) via the Windows Recovery Console chkdsk.  I tried / p, / r, / f, all give me a "volume contains one or more unrecoverable problems." or something like that.  If I try to install a new Windows, as soon as it "looking for previous versions", I get a BAD_POOL_HEADER blue screen with stop error message 0x000000C2.

  (b) I tried to hit every single F shortcut key, but none would let me go in the recovery console (which is F10 for me) and safe mode (which is F8 for me).  Only the F1 works, who has access to my bios Setup, I think.

  If I jump just the recovery console, I just get a white loading bar, who finally stops loading, and then I get a message telling me that one of my files (windows\config\system I think) is missing or damaged.  I tried after a few steps through one of the Windows solutions to counteract this, but I can't even copy/delete files via the command prompt that it denies access.

  Help, please!

  Hello

  · What is the number and the model of the computer?

  You can check the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/what-to-do-about-chkdsk-message-the-volume-appears/e351d02f-F508-489e-AFDC-988d8ddc462c

  Regarding the BAD_POOL_HEADER error, according to the research of mu, it points to be a hardware problem with the memory or a driver issue as possible.

  We can offer further assistance once you are able to boot XP.  Overall however, looks like some ongoing hardware issues.

• What to do about CHKDSK message "volume appears to contain one or more unrecoverable problems".

  My XP Home just quit starting all along.  Previoously before leaving he would do a CHKDSK scan and then go over to start.  Now, it closes a few seconds after the Windows screen comes up with the dots that runs through.  The Windows image stays on the screen, but nothing else happens.  I put in my XP disk to run the repair and got at the C:\Windows prompt after all the various commands of the finish.  Then I typed CHKDSK and Enter.  The first time that CHKDSK has stopped 38% full.  The 2nd time it finished and gave me the error message: "volume appears to contain one or more unrecoverable problems".

  I sure would appreciate it if someone can suggest my next move to get XP running back?

  http://www.computerhope.com/issues/ch001214.htm Hope this helps, Gerry Cornell

• 32 Vista BSOD problem getting the error '1000008e.

  Hello

  I'm using windows vista 32 bit on my system

  But recently, he begins to bsod at random like once a day

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.256.6
  Locale ID: 17417

  More information about the problem:
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 938A69D1
  BCP3: AB7FCAE0
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini112515-01.dmp
  C:\Users\Admin\AppData\Local\Temp\WER-73055-0.SysData.XML
  C:\Users\Admin\AppData\Local\Temp\WER4F86.tmp.version.txt

  Anyone know how to fix this? It gets annoying because it happens even when I do nothing

  I suspect that this computer has been upgraded since almost 20 years, as it has drivers on it since 1996.  I have not simply tools that will examine these drivers.

  giveio.sys 03/04/1996 21:33:25
  PEAuth.sys 10/23/2006 03:55:32

  I would start by upgrading these two drivers or going out.

• connectivity WiFi causing BSOD problem

  I was unable to connect to the wifi so I go to services > autoselect WLAN > General settings changed to automatic or manual selection and clicked on apply and start, after it appears a blue screen of death and laptop computer starts in safe mode. After the reboot, it shows more reason for BSOD

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 100000d 1

  BCP1: 00000004

  BCP2: 00000002

  BCP3: 00000000

  BCP4: 8BA405CC

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  

  Atheros Wireless LAN Driver to the version 1.00 release 7

  http://ftp.HP.com/pub/SoftPaq/sp47501-48000/sp47997.exe

• BSOD problem - Kernel Power

  Hi guys,.

  My pc crashes and I get a BSOD-

  I have a lot of problems happening at the time-is one that is marked critical-

  Log name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 30/05/2015 01:27:20
  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer: Zaks lead-PC
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  
   
     
      41
      2
      1
      63
      0
      0 x 8000000000000002
     
      57889
     
     
      System
      Zaks lead-PC
     
   
   
      74
      0x7796dc2a
      0x2
      0 x 0
      0xfffff88002f97b60
      fake
      0
   
  

  Then there is another error-

  Log name: Microsoft-Windows-Dhcp-Client/Admin
  Source: Microsoft-Windows-Dhcp-Client
  Date: 30/05/2015 01:31:46
  Event ID: 1001
  Task category: State of Configuration address event
  Level: error
  Keywords:
  User: LOCAL SERVICE
  Computer: Zaks lead-PC
  Description:
  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x266D574FB9DE address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).
  The event XML:
  
   
     
      1001
      0
      2
      3
      75
      0 x 4000000000000000
     
      2242
     
     
      Microsoft-Windows-Dhcp-Client/Admin
      Zaks lead-PC
     
   
   
      6
      266D574FB9DE
      121
   
  

  And third, when I generate a system health report, I get this-

  Symptom:	tv_ConfigMgrErr43
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The NVIDIA GeForce GT 630 M-unit, reported "tv_ConfigMgrErr43". This device won't be available until the problem is resolved. The Plug and Play ID for this device is VideoController1.
  Resolution:	1. check that the correct driver is installed.
  	2. try updating the drivers using Windows Update.
  	3. check with the manufacturer for an updated driver.
  	4. try to uninstall and reinstall the device using Device Manager.
  Partners:	Explanation of generated by Device Manager Error Codes
  	Manage devices in Windows

  Here is the link to the exit and the Dump file-

  http://1drv.Ms/1LSMx31

  Any help on these issues is very much appreciated. Thank you!

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You need not run memtest again unless you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  
  

• Different and several BSOD problem

  http://www.mediafire.com/download/7qee2td7qqcsg5z/062813-14601-01.rar
  Link to a dump file that has been created.  When more arrive I'll upload them as well.

  I have been using a program called "Whocrashed" to watch the dump, I guess he decided to delete after doing so.

  This show, it seems there is a problem common to all different BSOD errors and it is the kernel of windows and sometimes the authentication issues, but I don't know why or what it's trying to authenticate.

  I have already reinstalled windows 7 64 bits once in a few days and it has not solved the problem.  My system is completely up to date with windows update and my drivers are up to date as well.

  I have something special, installed in my computer, I use the integrated sound card, video card geforce 560, processor q6600 speed stock, 2 GB memory, 4 case fans, combo keyboard and mouse logitech, a 40 "1920 x 1080 hdtv with a sony 15" Wireless second lcd monitor.  The only thing I let on and running is Advanced Systemcare ultimate.  I'm sure that Microsoft Security Essentials is running in the background.  I have Malwarebytes Antimalware installed but you have not done it yet since re - install.  There is nothing about its place in the Task Manager and as far as I know, it sounds great.

  http://www.mediafire.com/download/7qee2td7qqcsg5z/062813-14601-01.rar

  BDX

  asacpi.sys (1043, 5, 0, 0) is no problem
  dump_atapi.sys () down I worry
  dump_dumpata.sys () don't worry
  dump_dumpfve.sys () don't worry
  Atmfd.dll (5.1 Build 237)
  amdxata.sys (1.1.2.5 (NT.091202 - 1659))
  secdrv.sys (4.03.086) is the newest and it rarely causes problems
  nvhda64v.sys (1.3.24.2, built by: WinDDK) I would update all three drivers from Nvidia
  nvlddmkm.sys (9.18.13.2018)
  nvmf6264.sys (7.03.01.07330)
  rtl8186.sys (6.1316.1209.2009, built by: WinDDK) [this is my antenna for wireless network]

  Dual-band tri-mode wireless SOC gateway. General description. The RTL8186.

  I'd like to update (at least check) the driver realtek

  http://www.Realtek.com.tw/products/productsView.aspx?langid=1&PFID=1&level=5&Conn=4&ProdID=4

• BSOD problems with a computer of windows 8

  Hello. I've had my computer for over a year now, and since about a week after I got it I had several problems with it. Initially, I had problems with usb devices works sometimes not. In this case I have to restart several times hoping to rework them. Over time, that has become less of a problem, but still exists. Then when I play games on my pc as the League of legends and world of warcraft games themselves would break several times. I also had problems with different programs crashing like Skype, google chrome and also blocks flash in chrome. Soon enough my whole system was crashing with BSOD messages or sometimes would be only to randomly restart or freeze.

  Here is a list of the different BSOD:

  irql not less or equal, page fault in nonpaged area, kmode exception not handled, pool header corruption of infrastructure critical bad memory management

  Unexpected kernel mode trap and driver irql not less or equivalent. With several different drivers be blamed.

  Now its to the point where I'll watch a live stream on twitch.tv or a video on youtube and it will crash after a few minutes. It happens more often in these situations, or in game, but it can also happen randomly even if soon as just start or idle.

  I tried many different things to update many pilots to replace my ram and hard drive as well as full reinstalls of windows and system different restore points. I wanted to ask you on this forum about it to see if it has what I can do to solve this problem before I send in for repair because I prefer not to be without him for an extended period of time.

  Thank you for hearing me.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  2-Memtest. (You can learn more about running memtest here)

  
  

  Co-written by JMH3143

  .

  You have an older driver that needs to be updated. Associated with MBfilt64.sys Audio driver of Creative Technology Ltd.

  You must also upgrade to win 8.1 at least.

• Time Capsule gen more recent problems PPPoE

  Hi, I have problems with the PPPoE connection in last TC with 7.7.7 firmware on it. When I put my dsl bridge modem and use the pppoe client in TC he just can't get IP address. I need reboot/update of TC for like 10 times or more to make it work. When I put my dsl router mode and I use TC only as DHCP server it works perfectly. What is the problem? Should I get RMA?

  I discovered, when I enter my details PPPoE client PPPoE TC and I put any name service, that I can not get the Internet to work, when I erase this service name I get all green lights and BAM, my internet connection works. But now is real problem, when I want to change something, for example DHCP reservations or anything else. If I click on update and the Service name field is empty so I can't have a internet connection. I need to re - enter any name service, and then the update, and then clear the name of the service for the empty field, then the work of internet connection. So I need to restart TC 3 times if I want to get internet connection.

  Think it's a bug in the firmware a little? I had this problem on 7.7.3 firmware also Pls help

• Infinite loop of BSOD problem - Satellite M55

  Many people receive the "infinite loop" error with M55 / ATI 200 M.
  Is there any solution for this? My laptop (bought in May 2006) is worthless... restarts every 2 minutes. Totally unusable.

  There was a post here where the user has indicated they have found a solution, but the solution was not displayed :(
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15169

  Please reopen this thread, or post the solution.

  If there is a new driver that I'm supposed to use, thanks for posting the link (as opposed to simply say "use a new driver").

  Thank you.

  Hello

  First of all... the infinite loop error is not specific to any video card.
  When you get this error? The BSOD appears during the game?
  Using the graphics driver from Toshiba?

  I t can give you a good solution, but if you use all the drivers of the operating system recommended should I run stable without any problem, the BSOD or interruptions.
  The unit is very old, and the warranty is valid. The notebook should restart every two minutes on something like this is not usual.
  So if the drivers of Toshiba won't help you I would suggest contacting the service point in your country.

  Everything has to be checked

• iPhone 6s more vibration problem

  My iPhone 6 s more than 128 GB is barely 2 months old and has been treated with care since the first day. I started to notice this buzzing/clicking sound when the phone is held vertically. The noise varies depending on how I want the phone.

  After some googling I found reports of similar problems on the iPhone 6 Plus.

  I made a video of my problem here: https://www.youtube.com/watch?v=6Kcf1pwBg9w

  Everyone knows the same thing?

  If anyone knows the problem is irrelevant. Polls and surveys are banned by Apple Support communities terms of use.

  It is under warranty. Make an appointment at the genius bar and get it fixed / replaced.

• iPhone 6 more battery problem

  45 days ago, I bought an iPhone to my brother as a gift 6 with 120 GB of storage.

  Everything went well. He used iTunes, in order to install anything for the new device, until last week, when something happened suddenness.

  Every night he changes his mobile, but all by the sudden sometimes when he turned off the nm the next morning, the display will show the battery icon empty, although he left 60% charged, the nit before!

  This symptom occurs half the time he turns on his iPhone 6 more last week.

  Is this a hardware problem? (which seems the most obvious)

  One software, or a combination of both?

  This is what there return to Apple for replacement, or it can solve the problem by a solution 'House '?

  Any help will be appreciated

  Thank you for your time

  Christos

  Athens, Greece

  .com

  ############

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact

• OfficeJet 6500 has more printing problems

  My Officejet 6500 has more (model CN557A) is connected through the USB port.  My operating system is XP.    I can scan my computer, I can copy and print from the printer control panel, but I can't send anything to print from my computer.  This problem just started about 3 days ago.  I tried troubleshooting but I have not received the case.  I did not add new programs, and I have 194 GB free on my hard drive.

  Can anyone help?

  N ° however, I accidentally discovered the problem.  I had a card reader connected to my computer to download pictures.  Apparently it disrupted the cycle of printing for my printer.  I removed the card reader and the printer works fine now.  Thank you for your response.