NO PLAY BACK DEVICE NXPSAA7162 SHOWS CODE 10

Similar Questions

• Audio play back well on some devices, no other

  A very strange thing that happens with an audio track that I'm editing for a video, with the help of hearing and the first. This is audio from a file video .h264/AAC. Everything seems fine on my machine, but when some people watch the video or listen to only the audio track, the sound becomes glitchy and barely audible. He plays for some people very well, not for others. I knew that there was a problem, because someone told me that what they meant to their end. I can't reproduce the problem on my computer.

  This is where it gets strange: on mobile phones, it is almost always a problem. However, if you use a headset or speakers, the audio is great. Disconnect the headphones/speakers and the audio is glitchy again.

  I've tried several things: editing and export Quicktime 7, Audacity, Audition, Final Cut Pro 7 and always with the same results. Any format/codec, compressed or not compressed: it's the same thing if it's an aif, wav, mp3.

  Here is a sample of the video on Vimeo:

  https://Vimeo.com/134962721

  And just the audio on Soundcloud:

  SonkaInterviewEdit by AgentGrifray | Free listen on SoundCloud

  Has anyone ever come across anything like this? What could cause an audio file work on some devices and others not? Why a device would not be able to play a file via its internal speakers, but can, when it is connected to speakers/headphones?

  Thanks for any help!

  The problem is that the audio file that you have produced is essentially a mono file of double track. However, there is a reversal of phase on one track compared to the other. So it seems to read OK on a stereo system but the audio will almost completely cancel on a system that only plays back as mono.

  Therefore restate your audio by reversing a track. Re-record and it should then probably play OK on everything.

• Audio clips do not play back on the new devices from Apple and Android

  Hola,

  Successfully exported and load a video on youtube.  Unfortunately discovered audio excerpts do not play back on latest Android and Apple devices, but being of other clips.

  It doesn't seem to be any rhyme or reason.  a lot of audio tracks, but I only have a problem with the two voices.  and select clips on the two tracks do not play back - it's not all one and nothing on the other hand, some play, some don't.

  video and audio play fine on most devices and computers, but on a privileged few, these audio clips are missing.

  PP CS6, exported in h.264 mpeg file.  audio is uncompressed 16-bit.

  Help.

  Florian

  I don't know if it's kosher to answer your own questions.  Understood that after about 4 hours of troubleshooting...

  reduced to all THE AUDIO CAPTURED on a PARTICULAR DAY.

  in figures, this bad paired audio audio the other day who played back fine: wav 48 kHz, 16 bit,.

  found a thread (http://www.videomaker.com/forum/topic/audio-channelscancelling-each-other-out) that mentioned stereo audio where one side is out of step with each other, when read by a mono speaker (some apple and android devices, but not all) it will cancel out (can still be heard, soundtrack and effects).  When reading through the headphones or stereo speakers, you can tell that she is out of step.  Something trying to convert the stereo signal to mono cancelled the progressive audio funny.

  My dose was hard pan the audio tracks, solo, export only one mono aac audio, re - import the sound signal of a new track, and I settled for the mono voices above.

  hope this helps-

  -Yes, thank you-

  -your welcome

• Device Manager shows no device, is empty

  My 8200 Dell under XP Professional SP3 shows not all devices in Device Manager.  I think that it started very recently when I was installing TM Internet Security after the removal of Norton Anti Virus 2009.  Eventually after using Norton Removal Tool. It doesn't show the devices safe.  Plug and Play is on.  I recently installed an old HP DeskJet 820Cse printer using existing drivers.  I do not think that article 953979 applies since it just (seem), took place but it seems to fit the description.  Any help is appreciated.

  There is a Microsoft 953979 patch that works, but it didn't on mine, I then found this articale and followed the instructions and it worked.

  (1) logged as an administrator;
  (2) Regedit > HKLM\SYSTEM\CURRENTCONTROLSET\ENUM.
  (3) right clicked Enum and gives right to the system and administrators full control.
  (4) clicked the button Options at the bottom of the window.
  (5) on the Advanced window checked 'reset permissions on all child objects... ". »
  (6) the deleted Enum key. Error message: error while deleting key. I had to remove this key twice because initially, it appeared the remains of Enum key. After that, the locked ENUM\ROOT\LEGACY_SSDPSRV who already had a lot of weird symbols example $% &' () * +-, etc., now gone. Registry shows an own ENUM\ROOT subkey.
  (7) PC rebooted and back connected to Windows;
  (8) window of the Device Manager showed some yellow exclamation not to mention that some devices not recognized, then refreshed a few times showing successively less then not many of these features.
  (9) PC rebooted again;
  (10) message screen saying according to Windows has finished installing new devices, and the computer must be restarted before the new settings take effect.
  11) Yes to restart the computer

  Now the Device Manager window is full and all devices running again!

  This solution works for my situation. I hope this helps someone.

• In a work previously Win 7 Pro Shuttle system, we are now "this device cannot start (code 10)" with high defination driver.

  The system with the problem is a shuttle G2 7600 with Windows Home Premium 32 Bit, AMD Athlon II X 2 ' dual core 2.9 HZ.  The sound is integrated 5.1 audio channels.  This works installed sense July 14, 2011.   We now have no audio.  After the properties of the device, see the "this device cannot start (code 10)" someone can help me with this problem?

  Hi Jack,

  You did changes to the computer before the show?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you try the steps from the following link:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/en-us

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Device error - sense Code (5-26-00)?

  Hello world...

  Another problem with PrE8.01.  I got this error code: "device error - sense Code (5-26-00) - invalid field in parameter list - general" after media coding and compilation of burn on the disc.  I have a dvd/bluray pioneer (new) engraver who worked before (not with PrE8).  Any suggestion please?

  Ben

  I asked questions and made recommendations in your other thread, so I won't repeat them here.

  For your burning problem:

  1. Looking for an update of the firmware of your player. You described the machine as good as new, it might well be exceeded.
  2. What brand of media you try to burn on?
  3. To a DVD, use the option "burn on the record. This ends?
  4. Play the video (from step 3) in a DVD player software (VLC is good and free if you do not). This play OK?
  5. Burn the file on a DVD using a burning tool stand-a-only (ImgBurn is good and free if you do not). Make sure that you burn not higher than x 4 speed. The burn ends? He plays on a DVD player connected to a TV?

  Post back with your answers please.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Satellite A80 - in ODD device with the code 39 error Manager

  Hello

  I have a Satellite A80 127. I have a problem with my CD player.

  When I tried to upgrade my XP Home Edition of XP Pro SP2, display said the restart that he couldn't play in my CD player. During the inspection, I found that my CD/DVD drive is unable to read CDs if it can read the DVD. From what I remember, it was working fine a few days before.

  I tried to locate the source of the problem and with the option of troubleshooting, I found that I have a yellow exclamation mark against my SCSI/RAID host controller in my device (with error code 39) Manager. I could not update the driver it give me an error message. In addition, there was a controller SCSI/RAID of Nero. I tried to remove to check if the main works, but always without success.

  Any suggestion would be great, and in the meantime I'll try to find similar topics.

  Thank you
  knockaert

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=111441 please

  Good bye

• Satellite L300 - CD/DVGW SD-L622A - device cannot start (Code 10)

  I n t really used the player for a while now, but it was working fine when I set up the laptop.
  Now, I recently noticed that when I go to my computer, it shows three years not DVD player. I went to properties and Device Manager and it says only: "device cannot start (Code 10)"

  I thought it could have been an update. I downloaded, but no idea.
  I restored in any case to a date earlier, but not had any luck, says always the same.
  I was wondering if if there is a way to restore only a specific part of the material to the way it was just after the first implementation, rather than restoring the entire computer and have to download and reinstall just like my printer and so on.

  Any help is appreciated, thanks

  Hello

  You can fix this by removing a high low filters in the following registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  But before you will need to remove these entries go to the Device Manager and remove the drive from the list of devices CD/DVD.
  Access to the registry, and then follow the above procedure.
  Finally, restart the laptop.

  That article should work it worked on my laptop too.

  Good bye

• Lite-On iHAS124-04 IT burner - DVD "device cannot start Code 10".

  Windows does not work with my DVD writer.  This is the third I've tried and I get the same error message in Device Manager.  "Device cannot start Code 10".  It shows the correct driver and BIOS recognized correctly as a SATA drive.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Device Mgr shows a problem with the graphics card

  Mgr. device initially says Code 10, I downloaded a driver (zipped) website of the SiS to 2003 (in the era of the PC)

  Right-click the compressed file, the shortcut menu contains the option "unzip" the files... Unfortunately these just led changing code code 10 code 1... basically the same problem I got it... either the pilot is wrong or not installed.

  Tried again, using Cnet, it was a similar vintage but this time "Winzipped.

  So that I could "unwind" that zipped, I can't do the same thing with the Winzipped file, the shortcut menu does not include an option "unpack".

  Double clicking on it opens a ' run ', which opens the "Winzip self extractor" that has a button seems fair to transfer the file 'compressed' to another location.

  This has the effect that the file is invisible to the driver installation wizard.

  Question:-how you uncompress the Winzipped file so that the driver can be installed?

  Question:-how to install a driver for this graphics card?

  I finally managed to find a driver package actually installed and friendly user who was not compressed with the 'winzip' dratted unfussy... Wow! almost as good as Linux!

  Hello

  You are welcome.

  We are happy to know that your computer works as expected. Please do not hesitate to contact us back, in the case where you are facing in the future other problems with Windows.

• Can not play back current recording

  I recorded songs using the tape recorder in Vista and they played back fine and always do.

  When I try to save now it looks like his works, the bar moves, readers multimedia window shows all the graphics as it
  plays but no sound. ITunes won't play it either, back to the bar moves as he plays but no sound.

  All the sounds of the music and the window work fine.

  Would be grateful for the help.

  Thank you

  HP G60 laptop

  Hello

  Thanks for choosing Microsoft community.

  By the description I think to understand that there is no sound in Windows media player when you play all audio or video.

  Let me go ahead and help you solve the problem with the sounds in Windows Media player.

  I recommend you follow the steps to solve the problem:

  
  Troubleshoot audio recording

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

  For everything related to the Windows operating system, do not hesitate to come back to us and we will be happy to help you.

• This device cannot start code 10 and could not open selected port

  I load the driver for my track past tracking key Pro and I get the message that this device cannot start code 10. I show no upper or lower filters so the troubleshooting on found here does not work.  If I go to program followed past and then look for the device I get the message could not open selected port.

  I tried all USB ports and they work with other devices. I have a Toshiba satellite running windows 7.

  The company was no help.  Can someone help me please?

  Thank you

  Liz

  Your best bet is to contact the developer again, we have no knowledge of their products.

• Microstoft ISATAP adapt: this device cannot start (code 10)

  I've had no internet access for a few weeks - a day that worked and then the next day no wi - fi or Ethernet connection. Someone on the MS Community suggested to install driver updates, but the laptop in question has no access to the internet and has been updated automatically anyway. Today, I tried to reinstall the drivers on the adapters wi - fi and broadband from the phone itself, which seemed successful. But when I got to the ISATAP Protocol would not do the same thing and it comes up with the error message in the title of this post.

  I read a few posts, which suggest to uninstall the adapter and then put it back, but as my laptop has no way to connect to internet, I don't see how it will work in my case. I don't seem to have the Win 7 CD either, unfortunately. So, where do I get a new adapter or update the driver, or whatever I need to do?

  Thank you

  IRB

  Hi Snarli,

  Thanks for posting the query on Microsoft Community.

  I understand that you are unable to connect to the internet and that he wants to know if you will be able to re - install ISATAP Adapter without an internet connection or not.

  I suggest you to run the troubleshooter and check if it helps.

  Hardware devices do not work or are not detected in Windows:

  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  You will be able to install base drivers to restart the system after installation.

  If you have any other computer where you can download the driver and the copy to an external hard drive or USB key, you can go ahead and uninstall the driver and restart the computer. Is it does not automatically get installed, and then try to install it by using a USB key.

  You can consult the advice given by Vinod N replied on 26 April 2011.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/this-device-cannot-start-code-10-Microsoft-ISATAP/dc43be6f-466F-E011-8dfc-68b599b31bf5

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• After the upgrade to Windows 7 Ultimate HD 4300 ATI Radeon - the device cannot start (code 10)

  Upgrade vista to windows 7 ultimate and as a result the HDMI to the Tv link is not working. -the ATI MobilityRadeon HD 4300 Series shows the message that this device cannot start (code 10).

  Downloaded ATI VGA Driver Acer laptop thie, but this does not seem to solve the problem.

  Hello

  Please follow the steps mentioned in the link below.

  http://support.Microsoft.com/kb/943104

• Windows Media Player cannot play back the video DVD.

  Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Original title: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  I was troubleshooting video playback issues throughout the morning after the reconstruction of a machine with a fresh install of W7 Ultimate, shot a few questions there.

  The first and foremost reason I couldn't play THE VIDEOS was due to the ATI Rage video card that was in the machine, proved that this card was not compatible for playback of DVD video on W7.  No problem with the system of video files (.avi, .mpg, .mp4, etc.), only reading DVD.  Disabling this card and media player running with a standard VGA device allowed me to play regular DVD movies very well.

  Another question, I stumbled on was with burned copies of the DVD, it turned out that my system DVD players, (2, one is a HP630E and the other is a typical ATAPI DVD DD internal 8 x 16), have a problem with playing movies engraved on DVD - RW discs.  Playing discs DVD-R worked well on this system.

  So in your case I try to disable the video device and let the system first use a VGA Standard, if your video plays well then check with the making of video for a updated driver device, saying "you have made any changes" does not mean that the system did not have a bad patch somewhere...