No programs don't run after hibernation

Similar Questions

• After Windows Update: Start, taskbar, toolbar, tools, etc., have disappeared. Disabled Task Manager, programs don't run, etc, etc.

  My multi-monitor desktop Win XP through a long Windows update yesterday. Starting this morning, button bar and try to start at the bottom of the screen are no longer present. My table of multi-monitor configuration has changed radically in view/settings. All the tabs on the Task Manager are missing - with the exception of the processes tab. All keyboard and mouse commands have been disabled. To restart, I had to unplug the computer from power. Restart twice again obtained the same results. As there was no apparent way to start programs and features in Windows (Control Panel, Windows Explorer, Manager tasks, etc.) I resorted to a Safe Mode system restore after snatching the lead for the third time.

  It seems that a system restore is the only cure for this, and I started this operation. Updates of various sellers require me to use to restore the system several times each month.  I learned to fear the automatic updates for fear that they will cost hours and days of recovery since the "cure" for other ailments that are not obvious to me. The last update all deleted antivirus controls volume and their icons. I have still not got their back. But I digress...
  My questions:
  What I've done wrong?
  Should I disable updates?
  How can I make sure that the updates stop disabling my computer?
  What are your recommendations to repair the damage?
  Thank you.
  Craig Olsson

  email deleted

  Hi Craig,.

  Follow these steps and check if the problem persists.

  Step 1:

  I would say you turn off the automatic updates (not recommended however) and install the updates manually ensuring that you will refrain from any installation problem causing updates unless it says "important updates.

  a. log in Windows XP to your administrator account. Click 'Start', then right-click "My computer" and select "Properties".
  b. Select the "Automatic updates" tab and then click on "Turn off automatic updates."
  c. click 'OK' to turn off the automatic updates.

  Step 2:

  You can also test the issue in a State of clean boot in safe mode (after installing updates).

  Note: Don't forget to restart your computer as usual.

• While closing, programs are pending and that I still have programs that are running, but actually I don't

  Hello

  I close all programs and then I closed my laptop but I see message programs are pending and that I still have programs that run, but actually I did not! I close all! and then after a few seconds it just stops himself well. In my view, there is a problem, why I see this message?

  This time, when I stopped my laptop a blue screen appeared saying windows is recovering from an unexpected shutdown. This was not unexpected at all, I closed all programs and all just stop it!

  From elsewhere when I press ctrl + alt + del and start the Task Manager I see not all programs that are running.

  It's a windows 7 64.

  I see message waiting programs so that I still have programs that run, but actually I did not!

  Actually closing manually request does not mean that it is not running

  Some of the startup item typically run in the background

  There is no additional work Windows doesn't do, what application you are running is to show

  All you can do is try to disable all start once and go to the service tab and select below "hide all Microsoft services and disable and to apply, it will ask the start/stop and see same problem is happening or not."

  Press win + r > type "msconfig" and enter and click on start and select Disable all and restart

• improve slow system performance... I don't know what programs need to run at startup? Please help me I have windows 7 Home Basic

  . I don't know what programs need to run at startup? Please help me I have windows 7 Home Basic

  Each computer has different startup programs - if you if you stop that you need you can turn it back on. See step 5 to turn them off.

  Windows 7 is slow

  (1) unplug all devices such as printers, external hard drives, microphone, webcams etc.

  (2) if the computer has only 1 GB or 2 GB of RAM, try adding more RAM.
  (3) make sure that your drivers are up-to-date.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  (4) defragment your Windows 7 computer:
  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  (5) reduce the start up programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  (B) on the general tab, click Selective startup.
  (C) then change the tabs by clicking on the start tab
  (D) uncheck the programs that you do not want to start when your computer starts (do not turn off your antivirus).
  (E) click OK, and then restart the computer.

  (6) disable some visual effects in Windows 7
  There are a lot of Visual effects that can be disabled safely to speed up Windows 7.
  A. Click Start, right click on "Computer" and select "Properties".
  B. click on "Advanced system settings" in the left pane to open the"System Properties".»
  C. Select the "Advanced" tab from him. Then, under 'Performance', click on 'settings '.
  D. now uncheck all the options that you do not want to use (some options disables Aero).
  E. restart the computer.

  (7) open the resolution of Performance problems
  A. open the Troubleshoot utility of performance by clicking on the button start.
  (B) in the search box, type "convenience store" and then click Troubleshooting.
  C. under system and security, click on search performance issues.

• Windows freeze after hibernation Dell Inspiron 660

  Every day my computer hangs when I wake it after hibernation.  Device Manager indicates that driver graphic card Intel is up-to-date.  Current Windows updates.

  Any suggestions?

  Hi barbara2351,

  You can run hardware diagnostics to check the operation of the equipment.

  • Stop and restart the computer.
  • Immediately when the Dell logo appears, press the F12 key. The list of boot devices.
  • Select Diagnostics and press ENTER.

  If there is no problem found, update THE system BIOS.

  The link is http://dell.to/1cT735B.

  Note: Before updating BIOS please ensure that:
  * No external devices (printers, external hard drives, flash drives) must be connected.
  * All other programs should be closed and saved documents

  Please share the operating system.

  Keep me informed of the results. I'll be happy to help you further.

• Need help choosing a new computer to run After Effects

  Hi all

  I waited to buy a desktop computer until I could set up something really good, but running After Effects on my laptop is not just cut it.  It slows down everything and when you try to use the feature plays only 6 frames per second. That being said, I need something that will give me better performance than my laptop but don't break the Bank.  (That way I can still move to a more desirable machine.)  I'm a noob when it comes to shopping for computers that go beyond the disk space and wifi, so I asked around, but honestly I'm more often conflicting opinions . I said the most important GPU, I said GPU is not serious at all.  It goes the same for the CPU.  I was also told that it's okay if I get something with integrated graphics on dedicated, etc.. This is where I hope you guys can help, since you actually understand the program I run.

  I would buy something already built, so I don't have to worry about what anyone screwing.  I've been thinking to get a desktop computer cheap off of ebay (as long as it will work better than my laptop) and then adding on it, but I don't know if it's the wiser decision.  All desktop computers can still be improved or they hit a point where they are worthless?

  Here are the specifications of my laptop:

  Windows 10 home

  Intel core i3 cpu M380 @ 2.53 GHZ

  4 GB of ram (3.80 GB usable)

  64 bit

  1 TB HARD disk drive

  Intel HD (internal) graphics with a total of 1696 MB graphic memory and 64 MB dedicated video memory

  
  

  Is there something out there that would be more fluid than my laptop, but for cheap AE?  Here are a few I've been Watch: Dell Optiplex 960 (3 GHz Quad Core Q9650 / 4 GB RAM / 160GB HDD)

  IBM Thinkcentre M58 PC Windows 7 Pro Desktop Core 2 Duo 3.0 GHz/8 GB / 250 GB HD with intergrated graphics

  A generation custom (with integrated graphics), including: Card mother Z87 - G41 / 8 GB RAM FURY HYPER / Gear solid 400w PSU / LG DVD PLAYER / INTEL PROCESSOR (3.2GHZ) G3258 / 240GB Sandisk Ultra II SSD / MSI cases

  
  

  And this one: AMD 4.2 Ghz Quad Core 8 GB RAM 1 TB Hdd/integre graphic.

  Thank you in advance for your help!

  
  

  
  

  
  

  For AE the only things that really affect performance are the cores, clock speed and memory.

  We must look at least an i7 quad core systems with hyper threading (6 or 8 core is much better, but more expensive) and at least 32 GB of memory. You must also at least two SSD, one for the OS, one media and projects. The video card is completely irrelevant for AE, any card $ 30 is sufficient.

  See Page Tweakers

• USB X121e failure after hibernation, stop along with BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe

  Hello. This is a brand new X121e. The half of the time when resume after hibernation, USB devices are not recognized, Device Manager freezes on the analysis of the changes of material and then stop the system or another attempt to Hibernate (a duration of 10 minutes give or take) it BSOD

  (DRIVER_POWER_STATE_FAILURE, * STOP: 0x1000009f (0 x 0xfffffa80030e6040, 0 x 0000000000000004, 0000000000000258, 0xfffff800049343d0) * ntoskrnl.exe - address 0xfffff80002e954da base at 0xfffff80002e16000 DateStamp 0x4e02aaa3).

  The last time she due to same corruption to my work (which was open during the crash) which chkdsk fixed only partially. In addition, some programs back on their default settings for some reason any.

  Played around with the drivers, has rejected the deactivation of USB devices, deleted some software, the Lenovo Power Manager, lost count of what I've done so far and how many days devoted to the research on the forums. Any help, please?

  Thanks for the help, guys. Solved by getting my own DVD Win 7, done the clean install without tons of bloatware Lenovo. So far so good.

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Satellite L650 - screen Get back after hibernation

  First time the Toshiba user and am on information overload. When the screen is put in hibernation, I gently press the button to return to the screen. Other methods such as drag the hand on the pad (I don't know what it's called) does not work as it does with another person using the same model. Also, I put my profile as "locked" instead of hibernation, so this may be the problem. Could not find a way to change. I have this Toshiba menu marking but watched most of the places.

  What do you usually after hiberbating to restart. ? Can anyone help please?

  Hello

  Your ad is a bit confusing and I have to say that you can return the laptop after hibernation mode if you press the power button. I put t really know what you mean with passage of hand on the cushion. It turns out if the laptop is in hibernation mode, you must press the power button to start it.

  If you have any other questions, just after again.

• Satellite L10-202 begins after hibernation without opening the lid

  Hello

  I have problem with start up after hibernation. When I close the lid computers go into hibernation. It's OK. But when I opened the lid it starts. Sometimes I don't even open the cover. I just take over and it starts.

  It is not critical, but it's very uncomfortable because when it is in hibernation, and I take it and move in a purse or bag it lights. Is it possible to configure something he'll start when I press the power button / stop and not when I open the lid?

  Hello

  As far as I know the Toshiba Power saver is responsible for the hibernation and the day before.
  In this case, I recommend first reinstall the Toshiba Power saver.
  Check it out.

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• Cannot download programs and basic games after recovery.

  Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

  All of a sudden we cannot download programs of basic games, after recovery we cannot not even down load dap download eccellerator!

  can help us, that's happened is that during the last 5 days.

  Hi Eric,.

  Chances are, something happened during the recovery process that prevents you from downloading something on the internet. One of the most common reasons for this is that the security settings are set too high. See the link below to learn how to change the security settings.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-Explorer-security-settings

  Another reason that you might not be able to download whatever it is could be the settings you have enabled in your anti-virus program, if you are running one. If you are, try to disable the program while you download those

• Put into service takes more than 15 minutes. Stop is worse. It hangs at "closing Windows" regardless of the programs that I run is extremely slowly.

  Original title: start & close problem. Slow response

  My PC is running Window XP SP2. I did all the updates.

  Recently commissioning takes more than 15 minutes. Stop is worse. It hangs at the "closing Windows.
  Whatever programs that I run is extremely slow.
  I ran virus scan, microsoft fixed, but the problem persists.

  Well, I think you don't like it, but the first thing to do is to eliminate by using their special tools Norton Uninstall program:

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home

  Now, you might think I be without protection and get some bad things on my computer, but you just want to see how things are going without it.  Just don't visit WWW stupid or silly sites, where you can pick up some virus or malware and you can always install a new copy, but I think it's a big headache for you now.

  It might be out of date, too many options of protection installed, etc.  More protection is not always better, and you will pay for it in the performance of the system with the more stuff you add.

  Then when Norton is gone, proceed as follows:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Consider instead of Microsoft Security Essentials or Norton - he did a good job.

  We must eliminate what can cause problems, so I'd start with Norton.  You can put it back later if you want, but you need to see how things are going without it.  Moving things to a good operating system that you are happy with first.

  Eliminate potential problems one at a time and test thing out... one thing at a time.

  Symantec/Norton is you biggest problem right now.

  Check your NVIDIA drivers:

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the DRIVERS GRAPHICS button to start scan and answered in the affirmative, if asked to install the plugin required to run the NVIDIA scan.

  Get rid of Norton.

• Not will not be up-to-date and exe. files as well as several other programs won't work after that I removed the Trojan horses today.

  I have two problems that first will not to day and exe. files as well as several other programs will not work after removing six Trojans today. I got the old fake security / you're not protected message led me to run McAfee and anti-malware that I solved the problem. It allowed me to meet Explorer but I tried to open the accessories of the calculator and it will not work, nor will my Rossetta stone. I can open these types of files under other users account on this computer. Help please.

  I suggest that you create a new user account for yourself (save all your files first of all that I hope are not damaged etc.). Then, you delete the old user account (but keep the files). Probably most of the programs have been installed for all users, so it should not be (I hope) a problem.

  Recently had to clean a computer infected with one of these software etc. rogue security and creating a new account (Administrator) so that the user has finished up and transfer its files to the new account. He was lucky. I hope you are too.

  Perhaps others may have other suggestions for you.

  Please make sure that the computer is clean of any infection etc.

  K