No Satellite M70-166 no reaction when the AC adapter is connected

Similar Questions

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• Satellite L655 - questions turn on when the power adapter is unplugged

  Hello

  I have a problem with my new Satellite L655. When the power adapter is disconnected and wireless is disabled, the laptop can turn on for less than a second turn it off again. OR turn 'power' and 'Wireless' turns on, but black screen and hd light; After startup bios of 30-40 seconds, the wireless light turns off and hd lights; OR turn on normally;

  Toshiba has changed the motherboard a few days ago, but the problem persists. Update BIOS. My laptop is the only one affected

  Thank you in advance,
  Maurizio.

  Hey Buddy,

  > Toshiba has changed the motherboard a few days ago, but the problem persists
  So have you contacted already technicians again? You must tell them that the problem is still not resolved and it must be another reason for this problem. Then get in touch with technicians again to clarify this issue.

  Have you connected external devices while laptop is turned off?
  -Online if yes remove each of them.

  Load default settings in the BIOS?
  -Online if it is not this. Enter in the BIOS, and then press the F9 key to load defaults.

  Otherwise, it would be time to service as I have already written. It must be a nuisance material

• Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

  I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

  I have read several other posts on other sites with people having similar problems.

  There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

  Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

  Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

  Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

  Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

  When I unplug my power as well the battery seems last mabye 5 minutes at the most.

  Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

  If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

  Concerning
  Florence

  Hmmmmm... interesting.

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• Satellite L30 - 10Y - Touchpad freezes when AC/DC adapter is connected

  I am the owner of a Satellite L30 - 10Y for about 2 yars and only recently has my mouse trackpad, and once I have unplug again the mouse stoped working when I plug my cable is very sticky and hardly move.

  I need help because now I have to charge up, we it and load back to the top

  * fat * HELP * bold *.

  Hello

  I have a similar suggestions and proposals of solution;
  First check if you are using the latest version of the BIOS. If this is not the case, try to update.

  But to be honest, I doubt that this could be a BIOS problem. It sounds more like a problem with a hardware component.
  I remember that my friend had a similar problem.
  The Courvite of mouse and touchpad jumped on the screen and was not usable
  It's a keyboard question EPA has replaced the keyboard and the problem disappeared.

  But this does not mean that your keyboard is broken it is perhaps only an option

  Anyway, the ASP must check hardware components; for example, the new adapter must be tested too

• Laptop HP ENVY 15 TS: My laptop HP envy 15 TS used power when the AC adapter is connected to the battery inside

  My desire to turn with pluged ac adapter and the battery in the laptop... I tried the charger and its fine... the power outlets are also very good... the lamp beside the AED charger on not even when the battery is inside the laptop... as soon as, I get out the battery with the charger plugged, the light comes on then and the laptop then turn on when I press the power button.  It loads for a few seconds and stops when the laptop is turned on without the battery and I have fix the battery in there. I do not understand this because the battery lasted for four hours without plugged the previous night and when he so weak and I wanted to load this problem... pls need your help guys... Thank you

  Hi @Manaseh_Tello1,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the computer that you want to start with the battery connected. I'll be happy to help you.

  Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?
  
  Will you please get back to me with the information above, so I can help you better.

• Trackpad and usb mouse stop temporarily when the power adapter is connected

  It is a very weird, crazy question. It began to happen today.

  Introduction: I installed ubuntu since 2008 in this laptop from version 8, now I installed 11.04. My brother has the same problem since a month there is around. It has the same model of laptop (DV9000 HP), but Windows Vista computer.

  The problem: mouse freeze random by 1 or 2 seconds, the two mouse pad and usb mouse attached. When I unplug the AC adapter, mouse works well immediately.

  Indices: I forgot my adapter in my apartment this week, and I got my brother to work here (the House of my parents). And another hint, I used a power adapter for cars, today give it a 19, 7V instead 18, original 5V AC adapter. My brother also use this car adapter.

  Hey, try to get the other original AC adapter. My laptop has become normal when I got my power adapter. See me first post

• Computer HP laptop goes black when the power adapter is connected

  Hello, g ' Day

  I have a HP Envy Sleekbook m6 and just today I realized after plugging in the power adapter tge screen woul go completely black. I can hear the cell phone still in market, but I don't see anything. If I play music until the screen goes black, it stops. I tried to change the power plan to see if that would settle the matter, but it does not work. Is there a way I can fix this?

  Thank you in advance.

  Hi jessiecornwall,

  Thank you for the information. I suggest you go to Device Manager and right click on your graphics card and update was from there. Here is a document of Manager of devices for Windows 8 information which has steps for the error codes you get.

  I am also including this document for an Overview of the switchable graphics or Dual GPU that explains what they are and how they work.

  I hope that this information help, please let me know how it goes.

  Thanks and good luck!

• Satellite M70: screen stays black when the cover

  I changed the OS XP Home on my M70 laptop with a retail XP Pro... I downloaded (I think) all the patches in this forum, but when I close the lid of my laptop and reopen the screen aren't animate. Activate the hard disk drives and dvd rom, but the screen remains black. What Miss me?

  Hello

  Utility energy saving there is an option called when I close the lid. What is there as option set?

• Satellite A300 stops when the power adapter is connected

  Hello!

  Yesterday, I bought a new Satellite A300. I plugged it in, worked some time with her and then I decided to stop it while it was plugged.
  The computer has stopped working, but in a few seconds, he started alone.

  I tried to do it while it was disconnected and there is no problem, but when it is plugged the problem persists.
  I would be happy if someone can help me!

  Thank you very much!

  I would try a BIOS update. You can download it here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite A130/135 dies when the power adapter is connected

  Yesterday, my laptop satellite A130/135 completely dead in use.
  Even the lights indicating that the laptop is plugged into the custom of light.

  I read today that by removing the battery, hold the power button and place the battery back in place, I could get the laptop to turn it.
  It worked, but after that my battery is low I plugged my power adapter and the laptop is returned to its State does not.

  So now I have a limited amount of battery power and it does not load.
  Yes, what's wrong with my computer laptop/battery/adapter

  How can I solve this problem?

  Hello

  I found your other thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=143840

  It seems that the problem might be related to the hardware failure and all you can do is contact the ASP in your country.
  I put really know what might cause this problem but I think it could be something wrong with the motherboard

  To check the device by a technician of ASP.

• The button control for CD - DVD on Satellite M70-166 does not work

  I don't have a model Satellite M70-166. PSM71E and the CD-DVD button control does not work (up to a few days ago it worked...).

  can someone help me?

  Thank you!

  Try to roll back OS to an earlier time using System Restore utility. If this does not help please let us know.

• Performance of WLan Z830 satellite falls down when the AC adapter is plugged

  Hello

  When I plug my whole wifi power cord breaks. 54 MB to 2Mb!

  In the Power Options, everything is the same as the answer key, battery with or without.

  Any ideas?

  My camera is a

  My laptop:
  SATELLITE Z830-10J ZB040302H

  How about WLan driver update?
  Have you tried that?

  To be honest I have never heard of such symptoms when the power adapter has been inserted
  Of course, I read on the issue when the power adapter has been removed from power saving

• Satellite Pro U400 freezes sometimes when the power cord is plugged

  Hello! I know that this problem has been addressed here and there, but I'd like to open a new thread about it. Here's the scenario.

  I recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original, (b) in addition purchased authentic of Toshiba PA3636U-1BRL, 7200 mAh. The laptop has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I use XP Pro SP3 (own installation by myself). Everything works fine, except for one thing:

  Sometimes (but), when the laptop is running on battery power and I plug in the power cord, everything hangs and I have to restart. A few observations:

  It tends to occur more frequently when the low battery alarm has rung;
  (b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery.
  (c) it seems to happen most often when a USB device (mouse, for example) has been linked to the laptop, but it is not a rule;
  (d) it seems to happen less often when I move the mouse USB at the time wherever I am connect the power cord.
  (e) I've experimented a lot with Toshiba PowerSaver settings (for example to change the levels of CPU for my profile) but nothing I changed seems to change the situation.
  (f) I tried different suggestions I found on various forums, but nothing works (for example the BIOS settings);
  (g) otherwise, I can say that I have not really seen a smoother computer, everything works really fine, no other problem :)

  Everything that makes me think it must be some sort of bug in the drivers of motherboard driver PowerSaver or other drivers interact with battery, CPU or possibly USB. Y at - it an explanation to this problem and can it be rectified in some way (for example, by providing a driver update)?

  Hello

  First of all, I never heard a driver from the motherboard.
  There is a drive chipset or a graphics card driver. There is no such thing as a driver of the motherboard!

  Look, man. laptop should work fine even the AC adapter is connected or not connected
  If the laptop freezes while there might be a software problem, but in my opinion it could be hardware problem
  You must reinstall the operating system if the laptop would freeze always the issue might be related to hardware

  First of all the memory modules and AC adapter must be verified.
  If the problem persists even using new modules and AC adapter, motherboard may be affected.