'No Signal' - ti GTX 660 does not not with a card mother H-Joshua-H61-Μatx

Similar Questions

• a disk hard mbr does not recognize my card mother xp - 703

  Hello.

  I'm trying to downgrade my windows xp-703 aspire 8.1 for windows 7 and cannot operate.

  I disabled the secure boot. Windows 7 will allow to install on an MBR disk, but when I put the drive on the MBR (using another computer) that acer will not see the hard drive.

  I feel, this computer will only recognize the GPT disks.

  I even took a drive work with windows 7 and connected to this computer, and it still does not recognize the drive.

  Can anyone offer advice.

  Concerning

  Clive

  Hi all.

  Thank you very much for all your comments. It is resolved. I now running Windows 7.

  (XC - 703) my mistake in the subject line.

  I need win 7 because I have a software that does not work in win8 or win10.

  It has proved to be a BIOS initially. I got P11 - B1, who does not have the option "Launch the CSM". I had to reinstall win8, so I could run the upgrade of BIOS of windows that I was unable to boot from any external drive. Update BIOS version P11 - B2. Once I had started from my win7 disk (64-bit), I could use SHIFT + F10 to bring up a DOS window and use DISKPART to clean the hard drive.

  He then completed the installation of windows 7. I knew that he should like Acer provides Win7 drivers.

  Once again thanks a lot for your help.

  Clive

• Photoshop does not recognize my card 960graphic GeForce GTX

  Hello

  I need help on my graphics (GTX 960). Everything's fine (yesterday until I update an extension called FlatIcon (Fi)). I used it for a long time and nothing wrong. Now, Photoshop does not recognize my card. I updated the driver NVIDIA, photoshop set to run as a high performance with NVIDIA Control Panel, remove FlatIcon extension, reset prerefences (Alt + Ctrl + Shift), increase the size of the Scratch drive (200 GB free now), but without hope. I hope someone can help me solve this problem, thank you 1 million.

  Wood

  Can you have a think when this started.  Could he have when you went from CC2014 to CC2015 for example?  CC2015 makes the best use of the GPU acceleration and seems to be more picky about the material.

  You are not able to check the use of GPU acceleration at all, or simply not advanced drawing mode?

  What driver version are you using?

  FWIIW, my experience with a GTX970 was that I could only use Basic Drawing mode in CC2014, but it suddenly allowed me to set the mode advanced for awhile and then changed me back to the basic mode when I upgraded to CC2015

  353,3 get mode advanced for a short period, but it passed without known reason.

  

  Displays how do you drive?

  You have only a GTX960?

• Vista does not recognize video card

  I recently moved, and after I put my computer my monitor is not a signal. I plugged my monitor on the main port and it came. My computer does not recognize the card in the Device Manager. I opened it and inspected the map for all the Visual problems and plugged it upward and noticed that the fan on the graphics card not working. I then did a full restore of the system, reinstalled the installation CD supplied with the card after you disable the onboard and restarted my computer. Still does not recognize the card and after restarting it on my integrated card. Then, I went into the BIOS and selected PCI-E as my first. So... im out of ideas here, if the fan is still ongoing is not the card still work? I don't have another office to plug it in. Is there another way to know if the card works? Why it can't recognize the graphics card which was working fine before the move? On a side note, the computer was unplugged for 2 weeks during this time, but I don't know why this could be a problem.

  IM using Vista 32 bit.

  Hi Myriam.
  Thank you for visiting the Microsoft Answers forum
  If the fan on the card does not is an indicator that the card is not powered, so the only way to test it is to plug it into another machine to see if the motherboard is not giving power or is the card that is bad. You can also try to plug a PCI-E device and see if it has power.

  You have all the cables connected directly from the power supply to the graphics card?

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• ASUS Tablet does not recognize SD card

  My got transform TF 101 does not recognize micro SD cards. How can I solve this problem?

  Hi, Odiec,

  You have the software express gate on the system?  Update of the software

  http://support.ASUS.com/search/KDetail.aspx?SLanguage=en&no=80E22F30-B3FF-1DFE-9DFB-5CED63C0B176&t=2

  Put the card in the slot

  Restart the computer

  Now the system does not recognize the card?

  You formatted the card?
  https://www.sdcard.org/downloads/formatter_3/

• HP Photosmart 5520 does not accept SD card. Help

  I am trying to scan photos of all-in-one HP Photosmart 5520 for a SD memory card.  My printer does not accept my card.

  What is the correct way to insert the card?  Is a required adapter?

  Hi @cg51 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your printer HP Photosmart 5520 and who need to scan to a memory card. The best way to do that is located here in your manual on page 23. It gives you an instructions step by step.

  Hope that helps you to analyze.

  Thank you.

• Card NVIDIA GTX 660 it not recognized?

  PP CS6 Mercury Playback engine supports the Nvidia GTX 660 Ti card. I just installed the card and it is not recognized in a new project.

  I have not reinstalled the software again, this part of the installation option.

  Any help or suggestion?

  In Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS6

  Notepad as administrator, open cuda_supported_cards.txt

  Add a line with "GeForce GTX 660 Ti" without the quotes, save the file and restart PR you can now enable CUDA acceleration in the project settings.

  Repeat this to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files

  and the raytracer_supported_cards.txt file

• I just spent an hour to compose a response in a thread ("Firefox does not with paypal"), only to see "You do not have permission" to submit - total loss!

  I was connected to respond in the thread "Firefox does not work with paypal. I spent the best part of an hour carefully compose this response, case tests, links, etc... [Tip: Firefox, unlike other browsers, has a problem with the server paypalobjects.comscripts.] Because I had taken so long to write the answer, she seemed to be a good idea to check in via the Preview button, but I received a message that the service was not available. Of course, I decided to submit it anyway, but when I hit 'submit' I got a message "you don't have permission...". "- at which point I (stupidly) on another page with this message, and what I wrote was gone!

  Anyway, it is definitely not normal that the site log out after only an hour. Sorry to hear about this. Maybe there was a little problem on the server with your session. If it is reproducible, I wonder if you have any software that could be quietly elimination of cookies for the inactive sites?

• Satellite C55T: Win 7 does not recognize the card, LAN and WLan

  I have a problem.

  I ve downgraded my Toshiba Satellite A5222 C55T for Windows 7 64 bit and it does not have many pilots.
  Windows does not recognize my network connection and it didn't install my wireless driver.

  Maybe I need a chipset driver, but I found no drivers for windows 7.

  Please help me!

  If Windows 7 has not recognized the LAN and WLan card, you have not installed the proper drivers.

  A5222 C55T satellite is the portable American model.
  The drivers can be downloaded from the Toshiba help page we: [Satellite C55T-A5222 | http://support.toshiba.com/support/modelHome?freeText=1200005866]

  Choose here the drivers / updates & filter by Windows 7 64 bit (left)
  Now you should get all Win 7 64 bit drivers for Satellite C55T-A5222

• Satellite Pro 2100 - works does not with 2 sticks of RAM

  Hi all

  I've been with sticks of 2 x 512 MB RAM from a reliable supplier that reassures me that this RAM is compatible with the SP2100 laptop.

  With the two sticks installed, as soon as the machine is running, I get no display and 5 beeps (1 long, a follow-up of 4 short beeps). Each stick of RAM work well individually, and I also tested slot A and b. Thus, the 2 sticks of RAM are working alone and work the two slots. It seems that this machine has a problem with 2 sticks of RAM.

  The ACPI BIOS is up to date (v1.40). I also tried the old 256 MB stick with one of the new sticks of 512 MB - same problem. I tried this as the supplier of memory mentioned this Toshiba may take only 1 GB maximum.

  Any ideas why two sticks of RAM does not work?

  Thanks in advance and amicably.

  James

  Hello

  You are right. The laptop must be able to manage memory 1024Mo. (2 x 512 MB)
  Due to your description, I think that both modules are compatible, but cannot play together.
  In my opinion, you should use two modules with the same specifications

  Try to use the modules recommended by Toshiba;
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

• Compaq 5008 MT, fresh install win7 pro. PCI slot does not recognize the card wireless linksys, (wmp54g)

  My hard drive doesn't have the other day (western digital 320g).  He left me stranded, I installed a new HD, installed windows 7 pro costs.  Everything seems to work except for my linksys PCI slot wireless network card.  In my control panel, I have a yellow on my network controller in the properties of the material.

  All ideas, it won't let me add a driver?

  I installed windows with the card in the slot, which shouldn't matter should it?

  Averagejoe56553 wrote: windows 7 pro 64 bit, version 4 linksys

  Hello Averagejoe56553, it seems that Linksys does not provide drivers for Windows 7 x 64. Wireless chipset used in the Linksys Card made by Ralink and they throw a few Windows 7 x 64 drivers for this card.

  Here a link to Ralink is where you will find all the Ralink drivers.

  Here is a link where the drivers for your card.

  You will be asked to enter your name and e-mail address to access the doe to download these drivers.

  If the one I linked to does not install or work on your Windows 7 x 64 system, try another version on the first linked page.

• Pavilion 6630f: onboard video does not when network card installed

  I have a pavilion p6630f. I got a computer for said NIC 4 network card. Now, this motherboard is not a x 4 slot for the card, but it has a x 16 slot. I put the primary onboard graphics, but it will not yet properly start with this network adapter. No idea why? Am I missing a setting or a BIOS update?

  Hi there @tttomdemaria
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand you are trying to put a NETWORK PCI x 4 in x 16 PCI slot card, but the video does not.

  Please see HP and Compaq Desktop PCs - features card mother MS-7613 (Iona-GL8E)

  • A card PCI Express x 16 slot (for the graphics card support)

• I have a MBP Late 2013 will pair does not with 6s on Blutooth

  Read all comments (lots of old stuff on these communities) and tried all the suggestions of trashing the plist etc etc. Still unable to get my iPhone 6s to pair with my MBP end 2013.

  For a fleeting moment after that match it says connected not connected appears.

  AirDrop works, but my phone does not appear on the screen of the devices. If sending photos of the iPhone works well my avatar is not displayed as sender just my intials & where ever he gets the ints info not the name I use in my Contacts.

  Someone at - it any idea what is happening. This worked OK until recently.

  An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

  If you try to use the procedure of transfer/continuity or AirDrop, which does not have Bluetooth but devices don't are NOT matched. Bluetooth must be just on and the devices within range of the other. The following may help in problems of transfer/continuity: https://support.apple.com/en-us/HT204678

• HP C5230: Scanner does not see memory cards

  I have a HP C5230 scanner, copier, printer.   It worked fine, but suddenly, it no longer reads any type of memory card.  Unfortunately, you have the scan to a memory card, so now the scanner does not work.  Anyone have any ideas?   It's like memory card ports are dead.

  Hi @niklasmama,

  Here are the directions to make a scan from the printer to a computer I found in the HP Photosmart C5200 User Guide.

  

  If the scan from the printer to the computer is not working properly, there is a problem with the drivers and the printer software.

  What operating system your computer is running?

  I'll watch for your reply, so I can help you further. Just reply to your convenience.

  Thank you!