No sound after Service pack 3 on my Windows Xp

Similar Questions

• I try to install Service pack 3 on my Windows XP, how do you know if there are other programs running

  I try to install Service pack 3 on my windows XP system when I try to download I have the C:\windows\ssystem32\ntdll.dll message is opened or currently in use by another application you approach other applications & try again, I'm connected only to Microsoft, how know if there are other applications running.

  I hope it's because you just made a new installation of Windows XP?

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3
  • Windows XP SP3 - read all the prerequisites for a successful installation

  What I propose is the following...

  1. Go to this web page: How to reset the Windows Update components? and use the FixIt utility in aggressive mode.
  2. Reset.
  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.
  4. Reset.
  5. Double-click the installation file downloaded in step 3 and follow the instructions.

• Hello, I just bought a new windows 7 service pack 1 than my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  my laptop is a lenovo

  On Sunday, October 5, 2014 12:59:11 + 0000, dougdgp wrote:

  bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  my laptop is a lenovo

  Depends entirely on this laptop you have. If it has a 64-bit processor
  You can use 64-bit Windows. If a 32-bit CPU, you can't.

  If you don't know you have, hold down the Windows key and press
  Break | Break. It will tell you if you have a 32-bit
  processor or 64-bit processor.

• system hang and hear no sound after Service pak2 charged.

  Event ID = 10005. Vista operating system repeatedly freezes at startup. Runs in safe mode. Uninstalled audio in Device Manager. start in normal mode and system works fine with a red x in the speaker (audio system does not). As the system loads and installs the drivers (Creative X - FI audio Processor (WDM) system crashes.) Have to hard every time start starting System. Event log recorded. Have messages such as Dcom got error 1084 to run {9e175b6d-f52a-11d8b9a5-505054503030}. Another event ID = 7026, start the following - system or boot-start drivers failed to load: mpfilter, spldr, wanarpv6.
  In September, I did a system restore with the operating system disc, but he continues to hang out with the same error messages. I contacted Gateway technical support and paid $199. for services and they could not identify the problem. You run microsoft fix - it and he tells me "system cannot play audio because the windows audio service is not enabled. Family using windows vista premium with Service Pack 2 installed. Sound Blaster X - FI PCI Card. All solutions is welcome.

  Hello frustrated1since080810,

  In addition to reply Manasa P, please pass the status after you run the Fix It tool in the link below and also listed in the answer above:

  How to solve problems that you experience after you install a Service Pack for Windows Vista?
  http://support.Microsoft.com/kb/948481

  Please also relay the exact brand and model of your PC and the sound card.

  You can also try to install the driver of sound card directly from the manufacturer of the sound card to the sound card and then check the question:

  http://us.store.creative.com/

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound after vista pack update help

  Please help me I have no sound after Windows update

  Here's how to solve your problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/i-have-no-sound-after-installing-a-service-pack/f16247af-313a-418d-915e-6403012c25eb

• After Service Pack 2 low disk space alert

  
  

  • After installation with windows service pack 2 problems.
  • Windows Update service pack 2 Setup.

  * Title *.
  After installing service pack 2 the drive that contains the windows began to have insufficient disk space, next before installing it he had about 8 GB of free space, what is the problem?

  Hi Ayman Jean-Claude,

  1. you are running Windows vista on the computer?

  2. how much free disk space you have after install vista sp2?

  There is a possiblity that the Windows vista sp2 installation files are always available on the computer that occupies disk space.

  Free space on the disk can be stored by running the disk cleanup on the pilot tool and check.

  1. open Disk Cleanup by clicking the Start button, all programs, Accessories, clicking System Tools, and then click Disk Cleanup.

  2. in the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If the Disk Cleanup: drive selection dialog box appears, select the hard disk you want to clean, and then click OK.

  4. click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  5. When you have finished select the files that you want to remove, click OK, and then click delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

   

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• UAC trouble after Service Pack 1 update (Win7)

  Hello

  Anyone have problems with UAC on Windows 7 after a Service Pack 1 update?

  After the installation of the Service Pack (in fact after installing a hotfix for KB2442962 but the Service Pack install this fix themselves),

  programs (e.g. install a programm), requiring a user access control stop after I entered the password for the administrator.

  Other things work until they need an administrative account and password. I can only disconnect and then sometimes, I get the error message (translated from German): "too many 16-bit-program files are in use. "16-bit-programs close or increase the value of 'files =' in config.sys. Is that everyone, who have this problem?

  Someone knows how to fix this?

  Hello

  OK I got it =) it's a Lenovo VeriFace software, which is not compatible with the UAC patch. After you have uninstalled VeriFace, there is no problem with installing software as a normal user =)

  If Lenovo have to fix bugs in VeriFace and spread of new software fixed!

• Pilot lost after service Pack 2

  I have already installed Service Pack 2 and Service Pack 2 KB948465 KB974469. I got a lot of wrong with SP2 including duty re - install windows. PC now under Vista Home premium, fully implemented to date. I lost the Driver for my Panasonic camera during the installation of this old update. This resulted in a crash of Windows and having to reinstall Windows for a second time.

  What I would do on the Firewire driver. I'm very nervous about connecting the camera after what happened before.

  Hi emily_elizabeth,
   
  Whenever a device is connected to the computer, Windows will try to load a generic driver for the device. If there is no generic driver, the driver should then be downloaded from the device manufacturer's Web site and install it or use the CD that came with the device and install it.
   
  Whenever the latest windows updates are installed on the computer, some device drivers need their own updates. We recommend to visit the device manufacturer's website, provide the model number of the device, select the product and download the right driver.
   
  Please visit this link to download the firewire for your device and install it: http://www.panasonic.com/business/provideo/support/
   
  The hunt for drivers: http://windows.microsoft.com/en-US/windows-vista/The-hunt-for-drivers-How-to-find-Windows-Vista-drivers-for-all-your-hardware

  Also check windows updates in optional updates to see if there is an update available for the device.
  1. open Windows Update (click the Start button, click all programs and then click Windows Update).
  2. in the left pane, click search for updates, and then wait while Windows searches the latest updates for your PC.
  3. If updates are found, click on view available updates.
  4. Select the optional updates that you want, and then click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, see this link: http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsvista.mspx

  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Side effects of installing windows xp service pack 3 upgrade on windows xp media center edition version 2002 service pack 2

  Will there be side effects to install windows xp service pack 3 update on my windows xp media center edition version 2002 service pack 2?

  Done correctly, installation of SP3 will have as a side effect, a very beneficial: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  How TO get a computer running WinXP SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• Could someone help me with updates for Service Pack 1 x 86 (Windows XP)

  I use Service Pack 1 x 86 for the home edition

  DIRECTLY from a disk of friends hologram

  Anyone know of a Web page that microsoft hosting yet

  updates of March 31, 2003, to August 8, 2004

  Please someone I like windows xp

  I have Windows 7 Ultimate edition with Service Pack 1 x 86 OEM {March 1, 2012} (on my Hewlett Packard G70 212 MS)

  I use Windows XP Home Edition with Service Pack 1 x 86 OEM with start of loading gold ^ _ ^.

  So I need the updates that lead to Service Pack 2 x 86 {hologram Standalone Update CD}

  Thank you

  Dean "Abraham" Pepler

  PS My Office is activated and genuine with a Serial Key {used an old key to my Grandads broken ACER Aspire Desktop G77E}

  Hello

  Service Pack2 (if you need it) can be obtained here.

  http://www.Microsoft.com/download/en/details.aspx?ID=28

  You should also get to the level of service pack 3. You may be able to do it directly from your current level of MS. Microsoft you have to be on SP1A or SP2 SP3 installation to run. Some participants say it will work also SP1. I would be interested for you to post your experience in this area.

  Service Pack3 can be obtained here.

  http://www.Microsoft.com/download/en/details.aspx?ID=24

  Have you tried windows update? My advice is not to do windows updates until you're at the SP3 level. If you already have, so this link should help...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f

  Tricky

• CVI RTE 2013 (without service pack) is supported on Windows XP SP2?

  Please note the links below and the description of the operating systems supported for the CVI RTE 2013 and CVI RTE 2013 SP1.  CVI RTE 2013 description is "XP 32-bit" and the description for the CVI RTE 2013 SP1 is "XP (SP3)".  Does this mean that the ICB RTE 2013 (without service pack) is supported on all 32-bit versions of XP including XP (without service pack), XP SP1 and XP SP2?  Thank you.

  http://www.NI.com/download/labwindowscvi-run-time-engine-2013/4105/en/

  LabWindows/CVI Run - Time Engine 2013 - R2 Windows 8/7/Vista/XP 32-bit/Server 2008 R2 64-bit/Server 2003 32-bit

  http://www.NI.com/download/labwindowscvi-run-time-engine-2013-SP1/4561/en/

  LabWindows/CVI Run - Time Engine 2013 SP1 - 8/7/Vista/XP (SP3) to Windows 32-bit/Server 2008 R2 64-bit/Server 2003 R2 32 bit

  Hello, Dan

  According to the Readme, LabWindows/CVI 2010 SP1 supports Windows XP SP2 (32 bit). Thanks for that bring to our attention.

  Best regards,

• I said that my printer needs me to get service pack 4 on my windows xp. Is there such a thing?

  I recently acquired a HP officejet 8500 - replaced in compensation for damaged earlier.  When I try to install the drivers for it, he says that it is not compatible with my windows xp. Get contacted the company who succeeded him they told me that I needed windows xp with service pack 4.  Is there such a thing?  -J' have service pack 3.

  Jessica

  NO.

• How to install service pack 3 when my windows Update gives me this 0x8024400A error

  I have an old computer 2002 I needed to do a reinstall on and now I need to update the little girl, but when I try to use the program to update the window I get a 0x8024400A error. thoughts?

  http://taurarian.MVPs.org/WU_XP/0x80240036_0x8024400A.html

  0 x 80240036 and 0x8024400A

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Requests indicates Vista Service Pack 2 installed, install Windows Vista Service Pack 2 (KB948465) new

  Vista Service Pack 2 indicates properly installed, but updates important update for installation: Windows Vista Service Pack 2 (KB948465)

  Download size: 6.0 MB.  How can I get rid of request to install?  Service Pack 2 installation is performed again, but it remains as update to install.

  Sometimes, when an update is installed and appears again it's because a file is missing.

  You must download it once more and if it shows up again open Windows Update, right click and select Hide update.

• Error 0 x 80070490 tries to install Service Pack 2 32 - bit windows vista

  I tried to install service pack 2 and I have worked as normal until I signed in. when I signed in I received error 0 X 0070490. I don't know what that means. Help?

  Hello

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  _______________________________________________________

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all