No sound on TV when connected via HDMI

Similar Questions

• I can't get sound through tv when connected via HDMI

  I have a HDX 18 and I connected it to my Olevia via the HDMI. I hear no sound on the tv. I used to be able to. What settings should I and how >

  Hey you probably already found a solution to your problem because you posted this comment a long time ago. But incase you don't have. Here's the answer to your problem. I hope it helps.

  • New direct connection between a TV high definition and a graphics card in the computer using a HDMI cable
  1. So that the audio works fine on HDTV, the device must be configured as peripheral by default in the computer Device Manager. To do:
  1. In Windows® XP:
  1. Note! Before you configure the audio device by default, the following Microsoft driver must first be installed: Universal Audio Architecture (UAA) High Definition Audio class driver
  2. After installing the UAA driver, click Start
  3. Select Control Panel
  4. Select sounds, speech and Audio devices
  5. Select sounds and Audio devices
  6. Click the Audio tab
  7. In the first article entitled audio playback, select the device you want to audio out of
  8. Click OK to save your settings
  2. In Windows Vista®:
  1. Right click on the "speaker" icon
  2. Select the device of reading options
  3. Right click on the device you want the audio to the output of
  4. Set as audio device as the default
  5. Click OK to save your settings
  3. In Windows® 7®:
  1. Go to the Start button
  2. Select Control Panel
  3. Select the material and audio
  4. Select sound
  5. Click the Read tab
  6. Select the device you want to audio out of
  7. Click on set as default
  8. Click OK to save your settings

• SP2309W won't go into energy saving mode when connected via HDMI

  Hello

  I just got 2 SP2309W, and I love them, the only problem I encounter is just one of them (the one connected via HDMI) is not in power saving mode, even when I turn off my laptop. Is anyone else having the same problem?

  I have connected the monitor via VGA and DVI and the energy saver works fine but it does not work with HDMI

  I have a XPS 1530, Intel Core 2 Duo processor T9300with a 256 MB NVIDIA GeForce 8600 M GT video card.

  My XPS has a HDMI and VGA input so I have a monitor connected via VGA and the other via HDMI and even when I go around, always one connected via HDMI is not in the standby power mode even if the laptop is turned off (or when he goes to sleep).

  Thanks for your help,

  Ivan

  We left three SP2309Ws on all night to disconnect the HDMI cable and in STFC mode and came this morning to see the message from MONIQUE always there. They all didn't say, 'no HDMI cable. This is normal. In fact, we have tested on several other models of monitors and they all do the same thing.

• TouchSmart ENVY 17-j140us: no sound for tv when you use HDMI to the computer

  I just put my 10 year anniversary build Windows Update specifications 1607 an older version (build 14xx) and I can't get sound in my TV connected via HDMI. I installed the latest driver from the HP Web site. Audio driver does not work well. Here's a screenshot of my device manager:

  

  Thank you for your support

  Hello:

  See if it works...

  Since the graphic driver works, let's not trifle with the actual graphic driver.

  We need to install the Intel HD audio driver, which is why the audio does not work on the HDMI port and it is the HD audio device problem you see list.

  First download and install this free utility file, as the file 2nd on page is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, download and save but do not run the Intel graphics driver from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Once you have saved the graphic driver file, right-click on it and select 7 - Zip from the list of items.

  Have 7-Zip extract of: and let it extract the driver in its file name (sp72370).

  After that 7-Zip does its thing, go to Device Manager and click on the audio device problem HD in your screenshot.

  Click on the driver tab, click on set to update driver.

  Select her browse my computer for driver software option and find the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC, and you should get audio and video HDMI port.

• Satellite C660-1RQ cannot connect via HDMI to the NEC projector

  Hello.

  I have laptop Toshiba C660-1RQ.
  It can not connect via HDMI to the NEC projector.
  I tried many drivers - the 268,57 (taken from the Toshiba site) to the new 331.58

  I thought, that it my problem, but the same lapto (my friend work - we have a few these notebooks in company) works well...

  And my HDMI works with monitors, TV (but sometimes!), etc.

  I don't know what to do...

  > And my HDMI works with monitors, TV (but sometimes!), etc.

  If s computer laptop HDMI port works correctly in relationship with other devices, I think that the problem is related to your laptop.

  What happens exactly when the projector is connected? Can you pass to the external video using the FN + F5 key combination?

  The use of Fn + F5 keys can toggle between internal and external display.

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• U2715H, connected via HDMI or through DP?

  Hello.

  I have a U2715H monitor and consider buying a more. My video card has only one output port of DP. Where my questions:

  1. If I connect the second monitor via HDMI, the U2715H still will work at maximum capacity?

  2 would it not be better to use a CDM (male) to HDMI Cable (male) to connect the monitor instead of a (male) HDMI to HDMI Cable (male)?

  3. how worth it would be that would buy a new video card (which has several ports of DP) it?

  Note: I hesitate to do that because I met major problems after installing a new map recently and had to revert to the original. But I'll try again, if my monitors don't work 100% connected via HDMI.

  Thank you!

  Display port will give you 4K.  HDMI will not

• Popping / crackling sound when the Satellite L650-1PQ is connected via HDMI

  Hi all

  I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played. I tested the speakers with my MP3 player and the Xbox, and there is no POPs or crackles when I'm with them.

  I've updated to the latest drivers from Toshiba, but it has not yet resolved the issue.
  Any help would be greatly appreciated!

  Care of my system is as follows:

  Processor: 2.66 GHz Intel Core i5 480M
  RAM: 4 GB DDR3 RAM
  OS: 64 - bit Windows 7 Home Premium
  Graphics card: ATI Mobility Radeon HD 5650

  > I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played

  The crackling is in from the TV speakers. Right?

  Can you hear the Crackle even using headphones or speakers for laptop?
  If not, then I think that this problem could be related to his driver.

  In your case, I would check the settings in the control panel-> sound-> playback-> audio digital-> set up

• No sound on the TV when connected over HDMI

  I have HP G62 laptop. I seem to have lost the audio HDMI when I connect to the TV. Help, please! Have checked the Audio on the control panel and seem to only Realtex Hi Def speakers have implemented.

  Hi Tony,.

  Download the following installers and Save the in your downloads folder - you can rename each of them for easy identification.

  Driver Chipset.

  Installer of AMD.

  Next, open Device Manager, open sound, video and game controllers, right click on the Realtek HD Audio device and select uninstall - do not delete if requested driver.  Once this done, do the same for the ATI HD Audio device.

  Now go to your download folder, click with the right button on the setup of the Chipset and select "run as Administrator" to launch the installation - once this complete, are not reboot the laptop, but right-click on the setup of the AMD and again, do a right click and select "run as Administrator" to launch the installation.

  When it finished, restart the computer and let Windows take over completely for a few minutes.

  Connecting your laptop to the TV via HDMI, then right click to the speaker icon in the taskbar, select playback devices - hopefully, you should now see an entry for ATI HDMI Output; left-click this time just to highlight and then right-click and select "set as default device".

  I hope you now audio through television.

  Kind regards

  DP - K

• No sound on the TV LCD Satellite A200 is connected via HDMI

  The problen is: I connect to laptop (A200) for LCD TV (Philips) by HDMI. The video is OK, but his stay on laptop not LCD TV.

  Maybe the problem is THAT HDMI 1.2 does support audio and video not together? Only 1.3?

  Sorry for my English

  Hello Maria

  I have connected successfully Satellite A200 to my 32 LCD TV with success. Be sure to use high quality cable. As Gantz has already written sound can be enabled in the sound properties. When the cable is connected on the reading tab, enable HDMI output.

• Satellite P300 connected via HDMI receiver Onkyo 607 - no sound

  Hello

  I have the Satellite P300 1BB for awhile and I'm very happy with it. But now I have a problem with the P300 HDMI port. I connected with my Onkyo TX - SR 607 5.1 receiver HDMI. The image is there, but there is no sound. If I connect the P300 directly to my plasma tv, then there's sound through HDMI.

  I have updated the Conexant audio driver to version 4.83.1.0. The Panel mixer, audio, the audio driver for AMD HDMI Conexant is not connected when I use the 607. It is connected (and works perfectly) if I use the plasma tv.

  Is it possible to get this working?

  Hello abdoulraak

  Please don't be crazy about me, but how you write that you have problems with port HDMI on Satellite P300 when working with TV. I think you have problem with your receiver Onkyo 607.
  All of these updates will be not useful at all and you should check s manual Onkyo to see how it works and what kind of parameters that you can use the receiver itself.

  You have activated a right channel of the receiver? I have big receiver Technics and all the ports on the back will be used with a separate channel that needs to be enabled.

  See receiver manuals and collect information how it works exactly.

• my laptop g60 does not appear on my sony bravia TV when I connect via HDMI?

  I have a HP G60 104 ca laptop running windows vista and a 60 Hz, 46 '' 1080 p Sony Bravia TV. I tried to connect my laptop via HDMI to my TV but I do not get a display. My wife has a laptop Asus on windows vista and I had no problem, it shows up on the TV.

  Is there a device driver special I need to connect HP laptop to tv or maybe a simple setting that needs to be changed?

  The Asus has chipset intel intigrated while my HP Nvidia Graphics making the display settings on both computers laptops different vista.

  Also, I downloaded the latest Nvidia drivers so they are perfectly up-to-date.

  Hello

  Download and install the latest version of buttons to quick launch on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46731.exe

  When you installed, restart the PC.  When windows is up and running again, connect your PC to your TV, press fn + f4 and select projector only, and press ENTER to transfer the video and audio output on the TV.

  Best wishes

  DP - K

• Add TV LCD LG as an audio output device when connected with HDMI

  When I connected my laptop to my TV via HDMI, the sound came through the television. But I went to the audio output of the laptop by accidentally turning off the TV as a device on the selection screen of the "playback devices". Now I want to spend my audio back to my TV, but the device is no longer an option. How it add or repair?

  Hello
   
   
   
  Method 1.
  Please update the video card drivers, but also the audio drivers and then check if you have the ability to change the audio device by default.
   
  Update your sound driver in Device Manager:
  a. Click Start and then click Control Panel
  b. click on system and Maintenance
  c. under Device Manager, click on devices and equipment display
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  d. expand sound, video and game controllers
  e. right click on your Audio Controller, and then click Properties
  f. Select the driver tab
  g. click the Update Driver button.
  h. Select the option automatically search for an updated driver
   
  Windows will now look for an update for your Audio drivers locally and on the internet and then will guide you through the process of installing the driver.

   

  For more information see the links below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

   

   

  Method 2.

  For more information see the articles below:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

   

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite P300D connected via HDMI to TV - screen becames black for a second

  I have the Satellite P300D.
  But now I have a problem with the P300 HDMI port.

  I have connected to my TV via HDMI.
  The photo is here.
  Every two minutes the black screen for a seconds fue becames, then the picture comes back.
  It is very annoying when I watch a movie.

  Is there a problem with a hdmi cable or with drivers?

  Is it possible to get this working?

  Thanks for any help

  > Is there a problem with a hdmi cable or with drivers?
  Who knows?  :| I think that you will have to test it.

  You could try to reinstall the HDMI Control Manager. This driver is required for your HDMI controller.
  If the question will always be, I recommend that you test different HDMI cables.