Tecra S10 starts in 8-10 min

Similar Questions

• Tecra S10-I can't boot from the battery alone

  Hello

  I replaced my laptop battery and once I installed the battery pack with a compatible battery Toshiba-no, that my laptop won't start not from the battery alone (Tecra S10-114) after starting was performed by the power adapter (without fixing the battery), I installed it and the OS (WIN7 Professional) recognize and recharge the battery regularly.

  I can unplug the AC and the laptop works fine until there is enough battery power. Battery plug is almost the same as the original (5100mAh - 1BRS PA3588U 10.8V) - 10.8V 5200mAh replacement battery Toshiba PA3588U-1BRS PA3356U, etc..

  Can you help me understand why he has just this problem starting and the rest works well?
  You have a solution?

  Thank you
  Luca

  > I replaced my laptop battery and once I installed the pack of battery with a compatible battery Toshiba not my laptop does not start from the battery alone

  Maybe you should use a Toshiba original battery.
  Get in touch with Toshiba ASP in your country that could send you an original and right part that is compatible with the laptop.

• How downgrade Tecra S10 to Vista?

  My friend asked me to fix his laptop. There Tecra S10-11 has. He had installed Vista, but it was installed Win7.
  Now, he wants to come back that Vista, but it does not create the recovery disk. I checked the laptop and there 1.46 GB recovery partition.

  It seems too small. How can I reinstall Vista and remove the installation of Windows 7?

  I don't know what your friend did exactly and how he had installed Win7, but you can try to start the operating system from the HARD disk installation > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm but I don't think it will work.
  So to get Vista back you have two options:
  -To order the Toshiba Recovery disk under https://backupmedia.toshiba.eu/landing.aspx and have the factory settings or
  -To install Vista using the Microsoft installation disc. All the necessary drivers, tools and utilities that you can download at Toshiba support page > http://eu.computers.toshiba-europe.com

  The second option is not so complicated and with our help, you can do this. ;)

• Tecra S10 - 64 bit of Vista and Win7 64 bit driver question

  Hello

  I own a Tecra S10 and using Vista 64-bit operating system.
  Unfortunately Toshiba isn't supporting this version of the OS, because pilots proposed must be taken on different products that use the same hardware.

  Is anyone know wether Toshiba will start sharing the drivers for Vista 64 bit soon and whats on Win7?

  I think that Vista 64-bit drivers will run under Win7, but * when they officially released drivers for 64 bit Vista or Win7?

  Any info would be interesting.

  Thanks in advance.

  Hello!

  Normally it comes out drivers * after the release of the operating system. This means you have to wait a few months more I think
  But you think contacting Toshiba? Guys, you should know better than us users here. If you write an email or call, it takes only a few minutes!

  In addition, you should try the Vista 64 bit drivers. Most of them also works under Windows 7.
  And it s worth a try! ;)

  Good bye

• Tecra S10 does not hibernate on XP Pro

  Hello

  Tecra S10-10th with factory v Bios 1.60 (localozed in Polish). All new opened its doors today.

  Everything works except that the machine hangs during the return form XP hibernation mode.
  Recovery DVDs contains XP Operarting system preinstalled Service Pack 3.

  Tecra freezes after completing the progress bar white together for recovery XP (progress bar) at the bottom of the black XP start screen.

  No additional apps installed - PC brand new, created from plant Toshiba Recovery DVD with XP PRO SP3.

  Please help me.

  Hello

  I put t know if it will be useful or not, but one of my friends had a Tecra S10 and Windows XP froze from time to time

  He has updated the Authentec fingerprint software and this was the solution!

  The necessary software update can be downloaded from the page of European driver for Toshiba!

  Find out!

• Need driver disc to install Windows 7 on Tecra S10

  Hello

  I have a Tecra S10 - 11I with Windows Vista and I buy the seven Windows Update but when I try to install it, a message told me to install the driver from the cd/dvd drive (it is a Teac DV w28s-rt) and can't find it, can someone give me the link to download it or show how I can install windows 7 on my pc

  Thank you. (Excuse me for my English)

  For disk drive optical feature you n t need to install an additional driver.
  You can use your optical disc drive, the usual use of DVDs and CDs?

  Can you maybe send a screenshot of this message?

  As far as I know when you start the upgrade (upgrade disc put in ODD) you should see THE menu.

• Tecra S10-11 a - frequent faults and long service life

  Toshiba Tecra S10-11 has, PTSB3E-01900GG3
  Purchase date: 14.08.2010.
  Expiration date of the warranty: 12.08.2013

  For 16 months, the computer has more than two months of service!
  It is currently in service (exactly 505 days, 65 days in service. (Terrible!)

  First rehabilitation 17/02/2011 the problem with the sound. Repairs took about 40 days (I don't have a computer for work replacement)
  Second recovery 25/12/2011 the problem with button walk / stop. The computer is still in service (I don't have a replacement of the computer for work)!

  The frequent failures with a very long period of repairs influence a lot on my work. In addition, I have to present and take the computer in Belgrade which is located about 220 km from the city where I work.

  Please consider, Toshiba as a company with a good reputation, the complete replacement of my computer because I am a user in a company and I got high cost caused by failures.

  Unusual sound that you indeed have to wait as long.
  But I think that this does not apply to all Toshiba FSA.

  A friend of mine had some problems with a mobile satellite. Don't know what the problem was, but the whole procedure took 6 days. The technicians were very useful.

  I hope that someone will get in touch with you in order to solve this annoying problem.

• Tecra S10 - problem upgrading to SSD Kingston

  Hello!
  Tecra S10 - I am trying to upgrade HDD to Kingston SSD 128MD.

  During the new installation of Windows 7-64 installer complains that there is no boot device valid to create the system partition, even if the disk is recognized. BIOS is later, I tried configuring IDE and AHCI.

  Is there a problem of General compatibility with SSDS and the notebooks?
  I noticed a similar problem with satellite A200.
  Thank you

  Hello

  How do you update firmware?
  Have you checked if a firmware update is available and necessary?

  Found a page of Kingston providing SSD firmware updates:
  http://www.Kingston.com/en/support/technical/downloads?product=sv100s2&filename=KDID110225a

• Issues of update/upgrade of equipment for Tecra S10-183

  Hello

  TOSHIBA TECRA S10-183
  Serial number: xxxxxxxxxxxxxxxxxxxxx
  Model number: PTSB3E-0YR04KGR
  Code BTO: P8700/2G/160G/15.4WBT/DS2/L/M/B/W/3G
  Pre-installed software: Yes [R11382GR]
  Purchase date: 13/05/2011

  I use above professional mobile phone use for CAD programming as well as for Office applications.
  2 GB RAM (standard), I can increase up to 4 GB Kingston (ex aequo) on purchase.
  With the 160 GB HARD drive, I had a lot at the beginning of the loss of speed.
  So I leave a month later to a switch of OCZ Vertex 120 GB of a second
  And lasted almost 9 months without problems.
  Now, I don't have so much free space in my SDS. So I would like to
  'Intel SSD 520 Series 240 GB 2.5 SATA III'
  Skip the leave.

  My question would be, I would get this problem?
  (1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  In the manual, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  (2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  (3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?

  (4) can I switch to a processor / CPU? What size?

  (5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?

  (6) I still can't be on the Toshiba support site:
  http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
  find when you enter the serial number or model number is not my laptop?

  On a response, I would be very happy.

  Sorry for the bad English. My language is German!

  So I hope that someone can help me with my questions.

  With sincere friendships.

  Etem Basoglu

  > 1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  > Manually, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  The SATA controller is not limited in size, you can use 250 GB, 500 GB or more large hard disks. The same should be possible with SSD drives since the controller is the same.

  (> 2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  > Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  Don't know what you mean exactly, but if you want to installed Win 7 64 bit, then you can do without big problems the 64-bit drivers are available on the European driver Toshiba page.

  (> 3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?
  The laptop seems to be equipped with a NVIDIA Quadro NVS 150 M chip graphic. This is an external chip that is connected/soldered on the motherboard. But even if you can remove this chip, the upgrade is NOT possible.

  (> 4) can I switch to a processor / CPU? What size?
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  Generally the CPU upgrade depends on the chipset of the motherboard.
  You could upgrade the processor, if the chipset would support the new processor.
  There are still questions about BIOS support, but I've read here in the forum that some people have been able to upgrade the new processor.

  (> 5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?
  Support for 3G modules appears to support the HSDPA standard

  (> 6) I still can't get on the Toshiba support site:
  > http://de.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
  > find when you enter the serial number or model number is not my laptop?

  Maybe it is not inserted into the database, but your Tecra S10-183 belongs to the series of PTSB3E that you can search other models belonging to the PTSB3E for details

• Tecra S10-106 does not see the HARD drive 1000GO

  Hello

  I bought a 1000MB HARD disk and build in on a TECRA S10-106.
  The HARD drive was not identified.

  Do you have an answer why?

  Thank you for the help

  Hello

  He recognized the HARD drive in the BIOS?
  If not, then possibly the BIOS can't handle this HARD drive because of the size
  Try a 500 GB or 750 GB 2.5 HDD

• Two screens DVI on Port Replicator II with Tecra S10-160

  Hello to all 2!

  Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
  A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).

  My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.

  Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.

  Hope you got my point and have information or ideas for products for me.
  Thanks in advance.

  Hello

  Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.

  I mean such a cable like this

  Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)

• Tecra S10 - event log shows several errors

  My Tecra S10-167 has a problem since a few weeks now. In the event log, I have several errors, but especially this one:

  Provider of
  [Name] atapi
  -EventID 11
  [Qualification] 49156
  Level 2
  Task 0
  Keywords 0 x 80000000000000

  -TimeCreated
  [SystemTime] 2011-02 - 14 T 18: 20:12.558505100Z
  EventRecordID 3020
  Channel system
  Security

  -EventData
  \Device\Ide\IdePort0
  00000000000000000000000000000000000000000000000000 000004100000 0000100001000000000000000B0004C002000000850100C000

  My laptop gives me fatal errors and it restarts itself.
  Can someone help me solve this problem? Please guide me through this because I don't know much about computers.

  I have already reinstalled windows 7 with no result.

  Thank you...

  Hello

  New OS installation didn't help?

  Well, maybe something wrong with the RAM?
  Run tests of RAM using the memtest86 +.
  Maybe this tool allows to detect certain errors

  But unfortunately, the message displayed in your ad says nothing to me :(

• Tecra S10 - 123 and Linux Mandriva boot problem

  I have a Tecra S10 - 123 for two months and wanted to install Mandriva on it (I have no experience with Linux...). I burn the Image on Cd image .iso file and changed the bios settings to boot from the CD-ROM. It works without problem, but Mandriva stops to boot from the Live Cd once the kernel is loaded.

  What can I do?

  Maybe it's a SATA question, have you tried to set the SATA Mode in the BIOS to "COMPATIBILITY"?

  Work the other flavors of Linux? Maybe Ubuntu will install properly.

• Can Tecra S10 - I order a recovery to another disk?

  Someone knows how to change the language of Windows 7 on a Tecra S10?
  Can I just order a recovery disc Englsih from here:
  [https://backupmedia.toshiba.eu/landing.aspx]

  If so, what is the price of these discs?

  The PC has a license for the preinstalled Windows 7 Pro 32 bit German, and I need it in English.

  Hello

  I doubt that this will be possible.

  You can order the recovery disk only with the same Windows operating system which was preinstalled on your laptop.

  If you need a different language of Windows or another version of windows, then you will need to purchase an original MS Windows disc.

  This means that you will get the new clean operating system, drivers may be downloaded from the page of European driver of Toshiba.

• Tecra S10-11 - can I use a labelflash DVD disc?

  I have a laptop Tecra S10 - 11A.
  I would like to know if it is possible to change my internal DVD drive to another which has a capacity of 'labelflash '.

  Today, Toshiba sell laptops of the Satellite series with this kind of DVD.

  It ' possible to change my drive integrated with a Toshiba product or I have to use an external?

  Thanks in advance!

  Well, you must use a CD/DVD drive with the master/slave/c-salt settings compatible.
  The settings are controlled by ODD firmware.
  According to the user's manual these discs are supported;
  -DVD-ROM TEAC D-28
  -TEAC dinner Multi with DL recording DV-W28S
  -Panasonic DVD Multi DL recording UJ890
  -Hitachi LG DVD dinner Multi DL GT20N

  I don't know if one of these m readers would have supported the lableflash feature but usually you can order all the compatible parts of the ASP from Toshiba and maybe other drives with labelflash functionality would be compatible with your laptop