No sound on HDMI with ATI

Similar Questions

• Qosmio G30 - no sound output HDMI with Plasma

  Hello

  I tried to coonect my g30 with a Plasma TV, I get that video without sound

  I changed my defult for digital output device (SPDIF Out) device, but it did not help

  I don't have that in playback devices is:
  Speakers / headphones
  Digital output device (SPDIF)

  Help, please

  Hello

  I don't know what Qosmio G30 exactly do you have and what operating system is preinstalled but maybe that this document can help you:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  Check it out!

• Satellite A300 - no sound, the "speaker" with a red icon

  Hey there!

  So, I got this Toshiba sat idle until I decided to restore it to factory settings and start using it again. I remember exactly if I didn't sound the last time I started before restoring it, but now, after three reinstalls I've still no sound, all I have is the speaker with a red x icon.

  This laptop is using Windows Vista 32 bit, I had no problem during the restore, everything has been properly installed except audio drivers. I'm sure I should have something in the sense of "Realtek High Definition Audio Driver" or something on the Manager devices, but all I have is "ATI HDMI Audio" and three devices not recognized and the only thing that appear on the output devices is "Realtek HDMI Output/ATI HDMI Audio" and say that it is not. Already tried to reinstall the Toshiba drivers, Realtek, even went as far as to try to force Windows to install the correct driver, but it ended in a BSOD.

  Then... I'm really at a loss. I really want to restore the sound, and I refuse to believe that there is no solution. The device is detected every time even though she has not recognized... Then... Am I missing something?

  Help, please. =(

  >... until I decided to restore it to factory settings
  Original recovery image contains all the necessary drivers for all hardware components, so its driver must be installed correctly.
  Can you please open the Device Manager and check the status of the sound card it.
  Please post comments.

• No control of multichannel sound on HDMI Vista 64

  Unable to get multichannel sound on HDMI.

  I have Denon AVR 2807 receiver hooked up to HDMI output. Stereo works fine, however I can not multichannel sound when I play DVD movies. I tried different codecs (K-light, Vista codecs etc.) does not. Codecs generally see the 5.1 channel output, but the receiver input shows only stereo. When I check AC3 or DTS pass through options in codecs when I start to crack sound. Also, I found that in ATI HDMI Output setup, I still see only 2 speakers, so I can't change the number of speakers that I have.

  Previously, I had Windows XP on the same computer, multichannel sound on HDMI worked fine.

  Hardware configuration:

  Compaq 8510w mobile workstation (with ATI FireGL video, 4 GB of RAM), Vista 64 Ultimate SP2, I have the latest drivers ATI and HP.

  Hello

  I have the Asus M4A88TD - M Evo (AMD 880 g chipset) with built-in HD 4250 running Win 7 64 bit.

  I bypassed this problem by installing the drivers Realtek for the "ATI HDMI Audio Device. Realtek site:

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Once installed, I got the new option to enable AC3/DTS/WMA passthrough a tab of the properties of the audio device.

  I now take advantage of the DTS / DD 5:1 through the HDMI output to my receiver.

  I hope this helps!

• No control of multichannel sound on HDMI (HP ProBook 4515 s TM500 the)

  I have the HP ProBook 4515 s TM500:

  Processor: AMD Turion II Dual - Core M500 2.2 GHz, 1 MB L2 cache
  Memory: 1 x 2048 MB DDR2
  Hard drive: 250 GB-7200 RPM
  Display: 15.6 "LED HD 1366 x 768
  Graphics card: ATI Radeon HD 4330 dedic. 512 MB

  ProBook was no BONES, so I put Windows 7 Ultimate. Everything works fine, but I don't have surround sound, that that is when I watch DVDs with for example Windows media player, my Onkyo AV receiver is received only stereo sound via HDMI cable, Dolby 5.1 is selected in the audio DVD Setup. DTS does not sound at all. Please tell us what to do.

  Display the info:

  http://www.AMD.com/us/products/notebook/graphics/ATI-Mobility-HD-4000/HD-4300/pages/HD-4300.aspx

  Solved by myself. Download driver ATI for W7 ultimate on HP site. Everything is now w Grou.

• No sound from HDMI (image works fine)

  HP Pavilion dv6870us

  Windows vista 32-bit

  GeForce 8400M GS

  No sound via HDMI

  Recently, I cannot sound if the laptop is connected to the HDMI to my amp (it used to work before).

  In my "manage audio devices" I have only the speakers / headphones / SPDIF

  There used to work when SPDIF is connected, but all of a sudden its no longer works

  I tried to remove the "Conexant high definition SmartAudio 221" and re - install the new version, but it does not work.

  Can someone help me?

  m3csl wrote:
  "I tried one last thing before trying to ruin it with drivers.
  I connected the laptop to the TV to see if the noise is going to work that way - and he did!
  Which means that the problem is not in the laptop but with my receiver.
  Now, I need to find a solution in the context of these new revelations... »
  ------------------------------------------------------------------------------------------------------------------------------------------
  This account (to some extent) as a success.
  Unfortunately, it doesn't work with your favorite gear and I'm sorry for that.
  Thanks for reporting back!
  
  Good luck! 

• No sound via HDMI after upgrading Vista to Windows 7

  Data sheet:

  HP Pavilion Elite m9515y

  Sound:

  Realtek ALC 888 chipset s

  Video:

  GeForce 9600 GS

  With the original operating system Vista, I could right-click on the speaker in the taskbar and select the playback device and make the default output HDMI.  I erased my drive and installed Windows 7.  Now under the playback devices I have not the HDMI option.  According to me, speakers, headphones and Realtek Digital Output.  Sounds works fine with speakers or headphones.  I tried to install the latest audio and video of Nvidia and Realtek drivers.  I tried to go back to the original Vista drivers.  Nothing works.  At the moment I use a stereo cable to connect my PC from the headphone jack on my TV, but wish that I could get good audio HDMI works with Windows 7.  Anyone else having a problem with these chips sets?

  PROBLEM SOLVED!

  The motherboard has two S/PDIF outputs.  A pass by a connector and the wire internal graphics card HDMI.  The other goes to a RCA Jack on the back of the computer.  During normal operation of Vista, the driver probably did some function to determine if the HDMI connection is used, so that it does not disturb the owner of a system without card HDMI with this audio port additional inaccessible appear under their playback devices.

  Unfortunately, the BIOS or the audio driver or video card driver require an update for Windows 7.  No matter what function is used to detect if the HDMI connection is present does not, if ever it comes in the playback devices.  I hope someone at HP or Nvidia, Realtek is tuned for this.

  Until the corrected drivers or BIOS, I found a coaxial wire thin with an RCA connector on one end and who connected to the Digital Audio output on the back of the computer, transferred this thread in my machine, then cut and solder this wire over the graphics card HDMI input S/PDIF.  It seems stupid, but works like a charm.

  So ends 3 days of aggravation.

• 32L1375D - no sound on HDMI using PC not connected

  My HDTV has been replaced by Toshiba (backlight went) the new tv is a 32L1375DB.
  Everything seems fine, except when I connect to my PC via HDMI I have no sound.

  I have check and out HDMI AMD is selected by default on my pc windows 7 (processor i5, 8 GB ram, AMD HD 5870 graphics card). But under supported formats says 0.

  Audio over HDMI works perfectly on old TV and nothing else on the system has changed. The xbox, which is also connected to the new TV works fine. I tried the HDMI cable from the Xbox with the tv and tried on the two hdmi ports on the TV with the same result, big no picture no sound.

  Someone else had this problem? Can someone give me advice on how to solve it?

  Sorry mate, but I guess that this issue has nothing to do with the Toshiba TV but your PC settings.
  Usually, you have to choose the HDMI (or digital) in the settings of your PC.
  Panel of-> sound-> the Read tab

  Here you will see all available devices. In order to get the sound through HDMI out you must choose this device as default.

• Qosmio G40 - no sound on HDMI

  I can't get sound on my LCD TV connected with cable HDMI with my Qosmio G40. Help please.

  Hello

  I found a very interesting document from Toshiba which provides a step by step instruction how connect a Qosmio G30 to a TV using the HDMI port and why there is no audio over HDMI on Qosmio G30 under Vista.

  [No audio over HDMI on Qosmio G30 under Vista. | http://APS2.Toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm]

  _The paper said: _

  (1) open the "Control Panel" to click 'Start'-> 'Settings'-> 'Control Panel '.
  2) click on 'Hardware & Sound.
  (3) left-click on "his".
  (4) a window appears where you can select the playback device. Left click on 'device of digital output (S/PDIF).
  (5) after selecting the digital output, click on 'Set as default', then 'apply '.
  (6) now the signal must be properly transferred correctly to HDMI.

  Check this box:
  1. fix a television for the Qosmio G40 HDMI while both units are State in a "powered off the coast.
  2. turn first on television and then the Qosmio G40.

  _Notes on the HDMI connection: _

  S ' Please refer always to the manual of your TV on how to select and activate the TVs HDMI input port.
  -Please ensure that TVs equipped with a HDMI input port can be connected to the computer.
  S ' Please use a HDMI cable (NOT supplied with the computer) commercially available to connect to the TV and the computer.
  -Not all TVs equipped with a HDMI input port have been tested for compatibility with the computer. Therefore, does not guarantee that the HD DVD-video content can be displayed on any TV with an HDMI input port. Contents of the DVD - video HD may not display correctly on some TVs.
  -Qosmio G40 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV.

  Good bye

• Qosmio G50 not sound on HDMI

  * Qosmio G50 not sound on HDMI *.

  Hi all

  I hope everyone recognizes the following and would be kind enough to help me. I searched the forum and tried several of the solutions proposed mainly apply to Vista, but still.

  I hooked up my Qosmio G50 to my Philips LCD HDMI cable. Picture is ok, but there is no sound. I tested the cable with a Toshiba Satellite Pro L550 and it works allright. Image and sound work. But this laptop has Intel HDMI audio.

  I am Windows 7 Home Premium 64 bit slot. I improved by upgrading Toshiba DVD of Vista 64-bit. Unfortunately I do not know with certainty if the HDMI audio worked before that. I think so because I used the laptop to watch a movie on a Panasonic plasma. But I don't remember if it was before or after the upgrade.

  Realtek HD Audio device is installed driver version 6.0.1.5923
  Realtek HDMI Output is selected as default playback device.
  Test gives me graphic response (flashing) but no sound from my TV.
  Choose the other audio device Realtek Digital output doesn't change anything and I do not think it would work anyway.
  I tried to remove the device and then reinstalling the original drivers. I tried the REaltek drivers on their site.
  I tried to change the HDMI view only but what does nog change anything either.

  One thing that worries me is that, under his / Realtek HDMI Output / Properties / he supported Formats are no current format. The satellite gives me audio DTS and others. So I wonder if there should be present formats and if so, how can I change that / add a few.

  Please forgive me if there are mistakes in the text. I translate this to a Dutch version of Windows 7.

  Please help me. All suggestions are welcome!

  I found an article of * Support technique Toshiba * but for Qosmio G30. You must set a default to playback HDMI device

  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  Perhaps, it allows you to...

• Satellite A200 - 1JS PSAE6: only stereo sound using HDMI - why?

  Hello

  I have an A200-1JS (PSAE6) with a HDMI and HD DVD player.
  I connect my A200 to a LCD screen with an HDMI cable and its ok. Good picture and sound.

  BUT, when I want to see a movie (without using the HD DVD player) with a surround sound (5.1) the only thing that I get stereo sound coming out of the HDMI.
  I went to the control panel realtek option and in the HDMI output and I can only choose stereo.

  So my question is: its possible to get more audio channels (5.1) of the HDMI cable and if so, what should I do to play a movie with surround sound via HDMI?

  Best regards

  Pedro

  Hello

  As far as I know is not possible. HDMI cable offers transfer better video/audio signals to your TV and you can watch movies in best quality.

  For sound 5.1, you need port optical audio output, and according to the specifications of the laptop, this port is not available.

• QOSMIO G30 - no sound on HDMI when connected to HDTV in XP MCE.

  Hello-

  Can anyone help with a frustrating problem... How output sound on HDMI in Windows XP MCE?

  I place the video on HDMI output using * Fn + F5 *-I get a perfect image on my HD TV. However, the sound always comes from my laptop speakers.
  I have all the latest drivers and BIOS downloaded from the Toshiba site.
  I entered the settings audio and Sigmatel and tried everything, in particular by unchecking + 'Activate Dolby Digital Live Support' + within the Dolby tab which is recommended in a support forum.
  Nothing works!

  It's relatively easy in Windows Vista, because you can change the audio device by default for + the device of digital output (S/PDIF) + and which switches to HDMI audio, but there is no option under XP MCE.

  Someone who can help to solve this problem is rewarded with all the points and have total gratitude and respect :-)

  Thank you

  Mark

  It is a Toshiba FAQ:
  + No signal on HDMI on Qosmio G30 under Vista +.
  http://APS2.toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm

  But he of described the problem with Vista OS.

  However, the screenshot shows the codec high definition audio Sigmatel.
  I guess it is the same device that you can see in the menu drop-down

  Maybe you have to activate it.

• Re: Satellite A300-1MC - no sound via HDMI connection

  When I connect my Satellite A300-1MC on via connection receiver HDMI audio Yamaha in order to play music, no connection is possible, even without sign HDMI on the receiver is lit?
  any ideas?
  problem with the drivers or something else?

  This Toshiba document may be useful:

  + No sound via HDMI +.
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm

  The error is caused by the order of the pre-installed Intel display driver installation.
  The problem could be fixed by reinstalling the Intel Display Treibers V15.9.5.1502 or higher.

  Check it out!

• No sound via hdmi

  Hello

  I have a hp dv9000 with hdmi output.  I signed up for Netflix and connected the laptop hdmi cable to our TV.  Use of IE, I started a film and the video is very good.  The sound of the film is coming through the speakers of the laptop, but not the tv.

  Curiously, the windows sound is coming through the tv speakers and not the laptop.

  How can I get the sound of the movie to play through the TV?

  Hello Bulverde,

  By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

  Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  1. click on the button 'Start '.

  2. click on "Control Panel."

  3. 'Control Panel Home' click 'hardware and sound '.

  4. where it says "Sound" in green letters, there are three options below that are in blue, click on "manage Audio devices".

  5. This will bring up a window titled "Sound".

  6. on the tab 'Read' it has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  7. it should now check this option box.

  8. the sound should play through your HDMI connections to the TV.

  You can also see the article that will give you more information on this.

  http://support.Microsoft.com/kb/953500

  You can also watch the thread below in which another user had same issues and try different possible steps listed:

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/28691f82-610e-4F01-be2f-b2ced7cca645/

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Acer 5920 no sound on HDMI port only when play Skyplayer

  Acer 5920 no sound on hdmi port only when playing sky player

  can help a whole I use sky player and can't get her off hdmi port tv program. When I check the hd it tests ok

  Thanks, I found problem not with the computer but with player sky so I paly any website or DVD sound transfer on tv, but does not when playing sky player