No sound on T61p after going to Windows 7

Similar Questions

• Apparently, I have a missing MSVCP110.dll after going to Windows 10.  The result is that I can't open Flash CC Pro.  All work through this issue?

  Apparently, I have a missing MSVCP110.dll after going to Windows 10.  The result is that I can't open Flash CC Pro.  All work through this issue?

  Error: "msvcp110.dll missing file.

• HP Envy 17 t-j100: where is beats? And the sound is bad after you installed windows 10

  So I installed windows 10 when he pulled out a few months back. When I install my audio beats is completely left! As this laptop is shipped with it. He was the symbol engraved on it so the reason that this laptop was so expensive in the first place with audio beats adding (I know that Hp has probably had to buy the rights or something and so increase the price). That being said, my audio beats went and my sound is too bad. As the volume is low (yes I made sure it's not muted and checked my sidebar, you know one next to the time on the screen and also the video player or the music I listen too and also the audio Manager but nothing is). Also, my audio changed too. It used a different name that according to me, but after the update is "IDT High Definition Audio CODEC". I've also updated my driver, but even once, nothing worked.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• No sound via HDMI after upgrading to windows 7

  I upgraded a sony Vaio VGX-TP3Z-B from vista Home Premium to Windows 7. I got a LCD TV Sharp that the monitor is connected via HDMI everything worked perfectly before the upgrade, but after I can't get sound through the HDMI to the TV, I can plug the speakers into the PC, but the sound is not as good as the way to TV.

  On the settings of the sound output device (HDMI) theDigital is shon as not connected.

  I checked for updated drivers and those installed seems to be later and Sony have no support for upgrades to Windows 7.

  I'm really stuck and frustrated, I hate to be beaten, can you help me?

  Dave

  Hello
   
  You can try the steps below and check if the problem is resolved.
   
  (1) start Windows Media Player on any video file.
  (2) make sure that you can see the video and sound on the laptop.
  (3) the right of the mouse, click on area of Windows Media Player (video)
  More options-> Devices tab-> speakers select from the list of devices-> click on the properties button
  (4) in the pop - uo-> "properties of the speaker" modal window select the audio device: => select "Digital Audio (HDMI) (2-high definition Audio Device)" (on the laptop)
  (5) save all window
  (6) close and restart Windows Media Player
  (7) connect the cable HDMI and swith on the TV for audio HDMI
  
  Now the works video + audio works perfectly on television.
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sound not working after upgrading to windows 7

  A few days ago I updated my gf pc from windows xp to windows 7. The problem is that the sound does not work. I searched the internet and I tried different ways to deal with this problem, but nothing has worked so far. Which, in my view, could be the problem, it is that the computer does not recognize the speakers. Here is a screenshot of how resemble the sound playback devices. Windows sound is in Romanian, but it won't be a problem for me to follow all the steps you mentioned. If anyone can help me, I'll be with more recognition.

  

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Flash crashes at every time after going to Windows 10. Help

  I have upgraded to Windows 10 yesterday. Since then, NO videos will play with Flash. It crashes every time. It crashes almost instantaneously. I have updated Flash and all my plugins are now listed as Up To Date. Still it crashes every time. Help.

  Based on an article I found to support, I unchecked the box on Flash running in protected mode (which is the default). That solved my problem.

  Thank you.

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO

• Satellite Pro A10: No sound after upgrade to Windows XP Home SP2

  Hello

  Just use the recovery disks on my Satellite Pro A10, no problem with the sound, and then upgraded to XP Home with SP2, no noise.

  What I've read elsewhere, this is a problem and there seems to be an answer. I spent hours looking for drivers updated without success.

  I have also contacted Toshiba support, after blow and blow that they reported the following driver, 5.12.01.3542, which is the same one that I have already installed and does not work.

  Certainly there must be something out there that works.

  Ant.

  Install the driver of his most recent available FRO this sound chip and perform all the Windows updates available on the Microsoft page!

  Update just the BONES together!
  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  Notes; You may have to restart the laptop and need to connect to this site several times to get all available patches.

• No sound from speakers after update (Windows/BIOS)? What can I do to fix this?

  If you do not have from speakers after an update (Windows or Bios), please try a Hard reset first. Also, keep reset material mind does the same thing with each cell.

   

  Now, if the hard reset does not work, you will need to update the Audio drivers (Realtek High definition (HD) Audio Driver) on the HP site.

  Once you arrive at this page of your product type # in (if you don't know what your product is # or when it is on the laptop, here is a video that will show you exactly where to find ) > search click > select the option 'Software & Driver Downloads' > choose your operating system (not sure what operating system you have or where?) ( This should help out you) > then click after selecting operating system > scroll down and click on the + (plus) next to "Audio driver" > and then select the most recent version by checking the date on each download > then run.  Now test the sound after installation.

  Also, please try to use Recovery Manager to reinstall the IDT HD Audio Driver If the steps above do not work. How to use the Recovery Manager to reinstall the drivers and software is detailed in the document below.

  http://support.HP.com/us-en/document/c01868333

  The last step to do if you get always no sound at all is a system restore to when you know the sound worked and do not download the last updated after that.

  Here is the document to show you how to proceed. Select the option at the top that says "restore windows to an earlier point.

  Just make sure and save the files and upload, you have recently installed or saved on your laptop.

  THX

  Hope this information is helpful to you.

  THX guys

  

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• I have no sound after upgrading to Windows 7. I have a Dell Inspiron 1420

  So I sound after upgrading to Windows 7. At one point, I get sound in my headphones. Now I have nothing. I have a Dell Inspiron 1420.

  [Moved from comments]

  Go to the website of Dell, put in your service tag, and download the driver for your audio.

  Good luck.

• No sound after upgrading to Windows 8 Windows 7 on HP G60 - 538-CA

  On my laptop, I have no sound at all after the upgrade.

  The audio driver is called "Conexant Pebble high definition SmartAudio.

  I assume that the driver has not yet been updated, but is possible to make it work on my HP G60 - 538CA?

  Here is the solution (from HP Forum on the issue)

  This problem occurs for users of laptop G60 with 4 GB of RAM or more running Windows 8,

  an operating system for which HP has no intention to release drivers for updates.

  This method works to fix the right question:

  Press Windows key + R > (Type) msconfig (press enter) > select the "Startup" tab > click on 'advanced options' >

  Check the 'maximum memory' box (which will define the maximum amount of memory available) >

  Click on apply and restart your notebook when you're ready.

  or you can remove physically chips of memory RAM of your computer.

  This configuration should solve the sound problem for computers G60 laptop running Windows 8.

• All-in-One 200-5020: no sound through speakers after Windows upgrade Windows 7 10

  I just picked up a Microsoft offer for a free update to Windows 10 and since download, is no sound from my computer desk top of page at all.  It seems that everything works (button, speaker symbal, check Device Manager,) but no sounds.

  I already had Windows 7 on my unit.

  Here is some info

  My desk top: 200-5020 all-in-One

  Product #: BK257AA-ABA

  PCBRAND: Pavilion

  Hello

  If does not work reinstall the driver, and then try to use the audio generic driver supplied with Windows. Here's how: in the Manager of devices, right click (or tap and hold) your audio driver > update driver software... > Browse my computer for driver software > let me pick from a list of drivers for devices on my computer, select the Audio high definition device, click Next and follow the remaining instructions to install it.

• HP Envy 15 Notebook PC TS: Problem sound Intermittent HP Envy 15 TS / Windows 8.1

  Specifications of the computer:

  HP Envy 15 Notebook PC TS

  Product # E1P05AV

  8.1 Windows 64-bit

  Intel Core i7-4700MQ CPU @ 2.40 GHz

  2 x 8 GB of RAM

  Map of KBC Version 93.52 system 1963

  Graphics device 1: NVIDIA GeForce GT M 740 V.10.18.13.5435

  Graphics device 2: Intel Graphics HD 4600 V.10.18.10.3304

  Audio: IDT High Def Audio CODEC / pilot: stwrt64.sys V.6.10.6491.0

  Question: In the past months, my sound will go off randomly automatically.  If I close the lid and let the computer in to sleep mode or if I restart the computer, the sound comes back.  When the sound disappeared, the volume buttons on the keyboard, so to work with a lag and the mute on the keyboard does not work.  Try to use the sound test, or even navigate the tabs in the Properties section of speaker to accuse also considerably by the sound does not work.

  I noticed other things: I was watching a youtube video when the sound came out, I left the chrome tab that I used for the video and the sound comes back a few seconds later.  He then disappeared a few seconds after I opened a new tab and returned to watch the video.  I had also the same thing happens with the help of a video editing software - quit the application, sound came back, returned to the software, sound went out after a few seconds.  I also had both sound back after going to the speaker properties - Advanced tab and switch format, by selecting the test button and clicking on OK when a message saying "the sound system is in use, taking the test can cause the application to fail" (or something similar).

  I tried to use various utilities for troubleshooting when the problem occurs - the find and troubleshooting audio fix is no problem AND the device is listed as working properly in Device Manager.  I've uninstalled and reinstalled the latest drivers for the IDT HD Audio CODEC several times - no help.  In addition, the problem has been resolved not when I converted briefly to Windows (back to windows 8.1) 10.  In addition, I tried to use the other pilot of "High definition Audio Device" in place and place of the IDT CODEC, but the same problem happened - sound turns off randomly until I rebooted or put my computer to sleep.

  I'm pretty computer - savy but I can't seem to understand what the problem is.  It doesn't seem to be a hardware problem or the sound would probably not come back so quickly or clearly as it does...

  One last piece of information: I noticed that the first time that I reinstalled the Windows audio 24/06/2015 - and also several updates were installed on the 23 & 24 June - watching these updates to see if they are the cause of the problem.

  My father had a speaker bluetooth for Christmas - I tried it out on my computer because it works completely independently of my sound card and it was working fine.

  I bought one of my own for $30 at target - Jam Classic Wireless Speaker - and now I have wonderful sound.

  Does not resolve the issue of the root, but the problem is solved!

  I'm just upset that HP gave me the such a card its crappy that it only lasted 1 1/2 years before give me questions, just long enough to ensure that the warranty expires...

• Satellite A100-847 sound driver do not install on Windows 7 64 x

  After I install Windows 7 Ultimate 64 bit on my laptop, I don't succeed to install the audio driver (I try to use Realtek driver audio worms. 2.47 and Win 7 32 bit version of database drivers Toshiba.)
  All other drivers work fine.
  Anyone can give me a link with the correct version of the sound driver for Windows 7 64-bit edition?

  Concerning

  Hello

  try to download here

  http://www.freewarefiles.com/downloads_counter.php?programId=48031