No sound through HDMI - Satellite P300-135

Similar Questions

• WiFi with the Satellite P300-135 problem

  Hello

  Here's my problem:

  I removed VISTA and installed XP on my Satellite P300 - 135 (PSPC4E). After that, I downloaded all the drivers for XP and installed. But the wireless card is not recognised and in Device Manager there are two features of problem:
  -Device on high definition audio bus modem and
  -Network controller.

  I remember well the type of my wireless card and tried first with Realtek, but it did not work. Then I tried with Intel and Atheros drivers, but they do not have too much work.

  I hope someone can help me, because I don't want to go back to VISTA.

  Hello

  According to the specifications of the laptop Satellite P300-135 has Intel 11 a/b/g (13ch) - Golan WLAN card.
  Have you tried installing WXP driver for WIRELESS Intel network card?

• Satellite A660 - no more sound through HDMI

  My laptop is a Satellite A660 with Nvidia GeForce 330 M.
  I frequently watch movies on my Philips Flat TV using a HDMI cable and the software VLC.
  I had a past short, both sound and image at the top of the HD quality.

  For a few weeks, I lost all sound and image only.
  I have something special, all my drivers are the latest possible, and TV is well recognized in the acoustic Panel.

  Could you help me?
  Thanks for your help.

  When you want to watch movies on the TV check please sound properties > playback devices and do not forget the HDMI is enabled (green circle with a check mark).

  You hear the sound on the TV when the HDMI output is activated?

• Satellite P750 - don't want to sound through HDMI

  Hi - had a P750 and a screen LED ext without speakers. What should I do in order to leave only the "run" hollow photo of HDMI and keep the sound on the computer?

  Hey,.

  I agree with the user above. Click on the speaker icon in the taskbar and select the playback device. Just disable the HDMI output and the sound played on computer.

  Check this box!

• Re: Satellite P300-135: No. SPDIF in 'His' Panel after the installation of SP1

  Before this one had speakers, HDMI and SPDIF.
  Now - only speakers and HDMI.

  After all the works of S/PDIF through speakers device, but only in stereo mode.
  I need 5.1 DD!

  Could be another reason for that?

  Hello

  The SPDIF port is certainly available on this laptop.
  I remember that some devices can be hidden, if they are not enabled.

  So maybe you can do a right click in the Panel-> Sound and could mark called options hidden devices and features see the disabled.

  Then the SPDIF should reappear.

  Check it!

• Satellite P300-135 hangs when it is in mode 'sleep'

  Greetings,

  My brand-new P300 Satellite crashes sometimes mode "Eve" of Vista, and I can't recover with just one stop.
  (eve of XP works fine)
  I see that others have experienced similar problem, but in my case seems to happen when I accidentally Tickle (on USB) mouse while switching "Eve".
  I just updated the BIOS with the latest version, I have disabled wake up on LAN features, but the problem is still on.
  Also sometimes revives of idle if I accidentally touch the mouse, the event if the lid is closed.

  What should be the mouse with the mode 'sleep'? I see no other option of power that is related to the USB.
  Any other ideas?

  Hello

  It seems that this issue has nothing to do with the material of laptops because it works fine on Win XP.
  As you say maybe external USB mouse causes this problem, and we must try to find out why it is happening

  In the BIOS, you can find the option called USB Sleep and fresh.
  Please disable it!

  I'm not very well if it will help you, but you should try this m!

• No sound through HDMI to TV

  I know there are a lot of post on this issue, but nothing works for me.  I have a Pavilion dv5 - 1233se running windows 7 64 bit.  I uninstalled the drivers both graphics and chip and reinstalled (warning says that I was installing was older than the one I had).  Maybe I'm not find the correct drivers to install.  I fought this issue for a long time, any help would be great.

  Graphics card: Mobile Intel (r) 4 series express chipset family

  Audio, video and game controllers: IDT high definition audio codec and Intel(r) high definition audio hdmi

  I've never seen the HDMI Audio necessary I think I need.

  Thanks for any help.

  It worked!  I just uninstalled and reinstalled the drivers (same two I did last week) and for some reason, it worked this time!

• HP probook b 6450: Hp probook 6450 b no sound through hdmi cable

  Hello

  I have a problem, because I had a virus on my laptop, I had to reinstall windows 10. Everything is working again except when I plug in my hdmi cable it does not recognize the hdmi audio output. If I look at my audio devices it says: digital audio (HDMI) not connected. I tried to put my card video/audiodrivers/all drivers to day/re-installing what I think of cound, but nothing works. Prior to the re - install everything worked fine, so I think it's a software problem, I just don't know what it is. Can someone help me?

  Evan

  You are the very welcome.

  OK, you should be able to solve this problem quite easily.

  Because HP does not officially support your laptop for W10, but graphics driver W10 works, let's add the HDMI audio driver from the file of graphics driver for W7 on your laptop support page, without messing with the display of work W10 driver.

  First of all, download and install this free utility for files.  The 2nd high page file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, download and save but are not run this file from W7 graphics driver.

  This package provides the graphics driver Intel high definition (HD) with Turbo Boost technology for the notebook models and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64360.exe

  Now that you have downloaded and saved the graphic driver file, right-click on it and select 7 - Zip from the list of options.

  Have 7-Zip extract of: and leave it to extract the driver file in its file name of the file (sp64360).

  Once this is done, go to the Device Manager and click on the peripheral plain high-definition audio (not the IDT one).

  Click on the driver tab, click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is enabled, and must install the audio driver.

  Restart the PC, and you should now have the video and audio via the HDMI out port.

• Re: Satellite P300-135 - Gothic 3 problem "FN".

  The game is up to date, my drivers are up to date, but when all logo submissions that appear when entering a game are finished and menu screen appears, "Number lock" is automatically activated and cannot stop this function no matter what I do. The solution I came up with that was to remap the game for NumLock keyboard settings on.

  Can anyone give a solution to this problem, or there at - there a way to disable the keys "FN"?

  As far as I know Toshiba Flash cards can be disabled. You can do if you open the settings for Flash cards. You can find it under Start menu > all programs > Toshiba > utilities.

  Try it. Maybe using.

• Satellite P300-135 system issues using two HARD drives

  About a month ago I bought a faster hard drive for my laptop (because it wasn't hard drive 5400 RPM by default), and computer technicians to the store where I bought my laptop has recommended a Seagate Momentus 7200.4 250410.

  The first couple of days everything went smooth, but after that, every second, restart my OS (Windows 7 Ultimate 32 bit) reports of problems with my video card, sometimes 'Windows cannot initialize the device of this hardware driver. (Code 37) ", the other time"Windows has stopped this device because it has reported problems. " (Code 43) ", and when this error occurs, the keyboard and the keyboard do not work too.
  I made a simple and primitive diagnosis by deleting the second hard drive and rebooted 5 or 6 times, and everything went very well.

  So I think the problem is that the laptop has not enough power for two hard disks. Is it true, or is my phone begins to fail?

  Sorry for my mistakes of language, but English is my second language.

  Hello

  Usually the second HDD should not affect the performance of the system, but it of impossible
  So maybe you should test the specifications and performance of OS using another HARD drive maybe a HARD disk that takes in charge of 5400 RPM

• Satellite P300 connected via HDMI receiver Onkyo 607 - no sound

  Hello

  I have the Satellite P300 1BB for awhile and I'm very happy with it. But now I have a problem with the P300 HDMI port. I connected with my Onkyo TX - SR 607 5.1 receiver HDMI. The image is there, but there is no sound. If I connect the P300 directly to my plasma tv, then there's sound through HDMI.

  I have updated the Conexant audio driver to version 4.83.1.0. The Panel mixer, audio, the audio driver for AMD HDMI Conexant is not connected when I use the 607. It is connected (and works perfectly) if I use the plasma tv.

  Is it possible to get this working?

  Hello abdoulraak

  Please don't be crazy about me, but how you write that you have problems with port HDMI on Satellite P300 when working with TV. I think you have problem with your receiver Onkyo 607.
  All of these updates will be not useful at all and you should check s manual Onkyo to see how it works and what kind of parameters that you can use the receiver itself.

  You have activated a right channel of the receiver? I have big receiver Technics and all the ports on the back will be used with a separate channel that needs to be enabled.

  See receiver manuals and collect information how it works exactly.

• Satellite R630 - no sound via HDMI

  Hello

  I can't find a way to get the sound through HDMI on my R630. I tried the audio properties in the Control Panel, but there is no option to set the audio by default to HDMI device as there was on my old machine.

  Any ideas?

  Thank you
  Mark

  Hey Buddy,

  I had the same problem but the solution is quiet easy: you must set HDMI as output by default sound settings in Windows.

  Simply check this section of the FAQ from Toshiba, in my case it worked:
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm

• Photo graphic to blink and beep when light Satellite P300

  I hawe toshiba satellite p300 - 135 with 32-bit original installed Vista Home with cane when I bought the new laptop.

  After 2 years of use normal and all the working laptop suddenly start when turned on during the boot process, a strong sound signal without possibilities to mute or sound enthusiast make with sound pregnant control potenciometer, also when I run windows and normally use the video image on the start screen blincking (the video from the beginning of the video card will Flash on the LCD video output) and the windows begin to be useless for use normal.

  Help, please

  What we have already done:
  -not scanned everything with good antivirus AVIRA (doubt to be a virus problem) no virus found in memory or on disk
  -total complete reinstall from the DVD sistem beckup (when the laptop was buy new)
  -Battery and BIOS battery disconnected too long to carry out all the data of the memoryes (doubt to be a virus problem), after recoonection the bios battery and battery problem even begin to occure.
  Nothing helps

  I looked on the forums of thet is battery problem (defect battery) but no luck in the clear sollution or explanation.
  I don't usually buy new battery (if it is 100%, which is the source of the problem) becuse I would that my laptop works perfectly without battery also only be connected to 220 V adapter if its possible.

  Help, please

  In my opinion, this is not a battery problem.
  Have you noticed that if the laptop is connected to the power adapter only and if the battery is not connected to the laptop?
  If there is no difference then I would say that the question is not the battery problem.

  Maybe it of problem of graphics but did you try to update the display driver? \
  If this is not the case, try this!
  In addition, I would recommend checking the computer laptop and external monitor.
  If the same could not be visible on the screen internal and external monitor, the graphics card can be affected.

• 32L1375D - no sound on HDMI using PC not connected

  My HDTV has been replaced by Toshiba (backlight went) the new tv is a 32L1375DB.
  Everything seems fine, except when I connect to my PC via HDMI I have no sound.

  I have check and out HDMI AMD is selected by default on my pc windows 7 (processor i5, 8 GB ram, AMD HD 5870 graphics card). But under supported formats says 0.

  Audio over HDMI works perfectly on old TV and nothing else on the system has changed. The xbox, which is also connected to the new TV works fine. I tried the HDMI cable from the Xbox with the tv and tried on the two hdmi ports on the TV with the same result, big no picture no sound.

  Someone else had this problem? Can someone give me advice on how to solve it?

  Sorry mate, but I guess that this issue has nothing to do with the Toshiba TV but your PC settings.
  Usually, you have to choose the HDMI (or digital) in the settings of your PC.
  Panel of-> sound-> the Read tab

  Here you will see all available devices. In order to get the sound through HDMI out you must choose this device as default.

• Re: Satellite P300 - no sound when connecting computer laptop to TV via HDMI

  Hello

  I searched online on several sites and read the messages on this forum too but still could not find a solution that works.
  I plugged in the cable and instantly got video but no sound. This cable works fine with my PS3.

  I tried to set the audio device by default both HDMI and S/PDIF and reboot after each time, but it doesn't work!
  Also, when I choose HDMI as device and try clicking on the Test, I get an error message saying "cannot play the test tone".

  I checked for updates for the driver through Windows and it is said that there are no updates. I have a Satellite P300 laptop.

  Anyone have any ideas?

  Thank you
  Jen

  This means you have a perfect television image after activating the HDMI port but the problem is its only?