No speaker sound, news, still no sound

Similar Questions

• No speaker sound NB250 - 10g

  does anyone know if you need to install a driver or configuration the audio settings to get the sound of this netbook?

  I can not any audio signal via the unique built-in speaker, I've been using with her usb speakers.

  Of course you need driver. Install the audio driver of http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  What operating system do you use? Perhaps WXP?

• Satellite T210 problem of speaker sound audio (T210-112) if the system is moved

  * Phone: Satellite *.
  * Model: T210-112 *.
  * Operating system: Windows 7 *.
  Condition: new
  Versions of BIOS/Driver: unknown

  * Symptoms: *.
  * When the phone is picked up, fixed, tilted or moved * in the air during audio playback the * noise reverberates * for a short period until the system is stationary again.
  To describe more in detail, the 'sound-bite' which plays currently gets stuck and repeats several times quickly and then continues to normal playback. Let's say, for example the audio clip plays someone who says the word "toshiba" and pick up the laptop in the middle of it, it comes out as "toshi-i-i-i-i-i-i-i-i-i-i-ba". This has been tested with the internet streaming audio and audio via youtube an installed demonstration program running.

  * Troubleshooting: *.
  -Since it's a new laptop, I returned to the seller and checked if this happened on the view model in the shop. He did, so this seems to be a general problem.
  -J' searched the forum, support pages, google without result.
  -There seems to be no README / info AVAILABLE included with the latest version of the BIOS / Driver downloads from the Toshiba support site that describes known issues.
  -J' looked for related information from REALTEK (I understand that it is an ALC259-based system) but nothing is there.

  * Suspicions: *.
  I think this may be linked to the protection function of the hard disk (?) +, which is supposed to start when he realizes that the laptop may be declining. Perhaps this can be solved through BIOS or driver updates?
  (I have not tried to disable this feature on the system, or update any components that I wanted to return the unmodified system to ensure the refund. I want to buy this system but will not do without a guaranteed solution.)

  I hope you can help!
  Thank you!

  Hello

  Akuma is right.
  This is related to the installed HARD disk protection software.
  If the laptop would be transferred to fast the HARD disk Protection software blocks the head of the HARD drive in order to avoid that the HARD drive against damage. This leads to delays while writing or reading data from the HARD drive.

  It would be possible to remove the software from the system, but this is not recommended, because the software protects the drive HARD and without this software, you HARD drive may be damaged more quickly.

• No internal speaker sound on Pavilion dv7

  Since this morning I have no sound from the internal speakers of HP Pavilion dv7 Notebook. Connect headphones and speakers, both internal and external and headphones. Check all the settings and the Device Manager - o.k. all running Windows 7.

  Hello

  First, try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  If the problem persists, try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box to enable this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' once, highlight it, and then click the Set Default button - has this made a difference?

  Kind regards

  DP - K

• W550s speaker sounds

  Hello

  I wanted to just make sure if I got a bad speaker or others have had the same problem. I just got the W550s by mail, and as soon as I started using it in my room, I notice a sound that the president would after all make lu sound on windows. the sound would be something like melanie sound, it's super weird. Does anyone else have this problem? It's enough strong enough that you can not miss, and it's a little embarrassing...

  
  

• No speaker sound by activating during the call with 5.1.1 23.4.A.0.546 R6C

  Hello

  I just received my repair z3c (camera problem). When I activate the speaker during the call since there is no sound at all. The diagnostic test on the z3c works correctly.  I guess this sw related so but is this problem known by others?

  Problem solved after the firmware upgrade.

• 2.1 speaker system-no sound from the left speaker sound

  Its speaker problem

  I have a system of 2.1 speakers - subwoofer, a left and a right speaker. All of a sudden my left speaker stopped working. What can I do?

  Hello

  ·        Remember to make changes to the system?

  ·        You connect the speakers on another computer and check if you are able to hear the sound from two speakers or not?

  ·        What kind of speakers do you use?

  It could be a faulty socket. Try to connect the different speakers to an outlet and check if the problem persists.

  It could be a problem with the sound card drivers, I suggest to uninstall the drivers from the system and reinstall it on the system and check. Follow the steps mentioned in the article below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• No windows sound test - test of speaker sounds good

  Happens not all the test sound button sounds. The speaker test button sounds great. Audio plays well.  . WAV sounds ok if played via media player. Go to windows audio services and goes from automatic to manual start however was gray so could not try it as suggested that reported this problem in 2010. Also tried rebooting as someone else suggested however not go.

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• No sound from the headphones and speaker sound is crackly and distorted

  Original title:

  Audio problems

  Taken my headphones do not work when I plug in the headphones and the sound of my speakers is now crackley and distorted, any help?

  Hello

  1. have you tried to connect the headphones on another computer?

  2. What is the brand and model of headphones?

  3A this works much earlier?

  4 you did changes to the computer before the show?

  Method 1:

  Run the audio Troubleshooter that might help us diagnose the problem better.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2: Show disabled devices and headphones as a default value.

  Exercise the functions mentioned below to set the headset as default:

  a. go to Start and click on Control Panel.

  b. click on her, then a new window will open.

  (c) in the new window click on the "read"tab, right-click in the window and then click Show disabled devices. "

  d now check if the headset is listed there and right-click on it and choose allow.

  e. select headphones and click on ""as a default ". "

  Check if it works.

  In addition, see the following links:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps!

• Flashing speaker sound: Windows 8:

  With the help of Lenovo Ideapad Z500 Touch. About 2 weeks ago my sound stopped most of the time.  Occasionally, it will work for a minute when I reboot or restart.

  Realtek High definition is marked as default speaker.  (the speakers are NOT silent)  Troubleshooting the audio results in "no problems found".   Sometimes when I'm in my audio information, I get a message that the application is used by another device (or something like that), but have checked everywhere in my computer and cannot find anything a likely culprit.  Does not work with or without headphones plugged.  I'm not super technical, I hope someone can help!

  Thanks in advance!

  Hi Shelley,

  1 have. what troubleshooting measures you tried to solve the problem?
  2. the problem occurs with any particular audio?

  You can troubleshoot sound the currents on the computer by following the suggestions:

  
  Method 1: check out the steps in the link.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2: I suggest you to uninstall and reinstall the audio player and check if it helps.

  a. press the Windows key + X and then click on Device Manager.
  b. search for audio player.
  c. right click on the audio player and click on uninstall.
  d. follow the command prompt, and then restart the computer.

  Note: If the driver is not compatible with Windows 8 I suggest you to install the driver in compatibility mode.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Sierra upgrade - NO speaker sound

  After upgrading my MacBook Pro [13'3 inches, mid-2012] of El Capitan for Sierra my internal speakers stoped working and helmets as well listening. The only way I can use the sound is through Apple TV...

  Reinstalled Sierra, ran disk utility, checked his settings, rebooted the computer several times but nothing have solved the problem. Help, please!

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• No speaker sound

  My moniter has built in speakers, I've interlaced out the old and trendy moniter new using speakers, but audio does not work?

  I had a new hp desktop computer, unplugged the moniter that accompanies and pluged in my moniter with speakers, but says peripheral audio is disconnected... Please help me im helpless computers

  Hello

  Check with HP Support, their books online and the forurms and ask in the HP
  forums for known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Also a right click speaker near clock - reading devices - right click in the boxes area.
  Check see turned off and disconnected devices. Highlight the speaker and down
  Click right properties check parameters for the use of the active device and so on. Also don't
  Ditto to set it up in the bottom left of this box.

  I hope this helps.

• Alienware 14 speaker sound

  I recently bought an Alienware 14 and he arrived this week, everything is great except for the speakers. Half the time, they will run properly and the sound quality is excellent, but the other half it sounds as if they are only half of the work and the quality of the sound is really bad. I can remedy by plugging in the headphones and do not select the headset option. It fixes the audio quality, but I don't want to do that every time. Is there a way to fix it or are my broken speakers? I tried to reinstall the drivers and it did not fix.

  Send me a private message with your Service number and your contact details so I can help furhter

• 15 - r132wm: brand new still so slow laptop...

  I was using my laptop for about 2 months now. improved to 64-bit, clean install win10. the device is so slow):

  See below the results of the tests.

  any ideas how to improve the performance of this new machine?

  Thank you

  

  Before you perform the new installation of the operating system of Windows 8.1, it is recommended to backup your data on another drive. Now to help you install the operating system, please find the link given below and follow the instructions on the screen:
  http://Windows.Microsoft.com/en-us/Windows-8/clean-install

  There is a link over which can be useful.
  http://www.WikiHow.com/install-Windows-8

  In the case of additional aid, it is recommended to contact Microsoft Support Center from the link below:
  https://support.Microsoft.com/en-us

  Hope this will help you

• Printer HP C509a range: new/still a problem with the C309a with wireless printing

  Printer is now, do not print, then all the sudden days later, it will print what was in the reference. I checked everything I know how to check. I think to unstalling the software, but when you do that... There is ALWAYS something that lingers to create a problem during the installation again. Is there a good way to get rid of the computer of all the files that relate to the printer?

  OK, here's where I am. Computers 3 1 HP printer. I removed the HP software. Reinsall after I did the "usbready.exe" file in order to load the software.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/C309a-software-will-not-install/m-p/5476271#M79658

  FYI

  1 computer is wired 150 ft. - works fine. The other 1 computer (wireless router) to the point of HP printer

  works very well. It is the 3rd computer wireless to the router but does not work. The software, see TI but not install and plug. In one of 3 different choices. Now, I got a little my limits. I'll try to go in the "devices and printers" see on adding a printer and see if that can cling to the top. He is a friend and 24 far mi but needs to be done. The choice of HP software is the USB connection, Ethernet connection and wireless connection. All 3 see the printer but do not begin upward.

  Get it!... see red